summaryrefslogtreecommitdiff
AgeCommit message (Expand)Author
2012-10-08ENGR00227249 MX6SL-Add support for low latency STANDBY mode.Ranjani Vaidyanathan
2012-10-08ENGR00227020: devices-common imx_dma_data duplicate struct definitionAdrian Alonso
2012-10-07ENGR00227250 MX6SL/MX6DL-Fix IRAM sizeRanjani Vaidyanathan
2012-10-01ENGR00180348 EPDC: invalid data when width is 2048 or greaterMichael Minnick
2012-09-29ENGR00225981-8 csi/imx6sl: add the platform-related settingRobby Cai
2012-09-29ENGR00225981-7 csi: Unify the api set_mclk_rateRobby Cai
2012-09-29ENGR00225981-6 csi: Add PxP post-processing for CSCRobby Cai
2012-09-29ENGR00225981-5 imx6sl: update the defconfigRobby Cai
2012-09-29ENGR00225981-4 IPU: Remove IPU fb build for MX6SLRobby Cai
2012-09-29ENGR00225981-3 csi: Add csi driver support on MX6SLRobby Cai
2012-09-29ENGR00225981-2 pxp: fix the coefficient for the YCbCr-RGB CSCRobby Cai
2012-09-29ENGR00225981-1 pxp: add UYVY input pixel formatRobby Cai
2012-09-29ENGR00225960-04 mx6sl evk: Add sii902x GPIO/IOMux settingSandor Yu
2012-09-29ENGR00225960-03 sii902x: Added sii902x HDMI driver with ELCDIF FBSandor Yu
2012-09-29ENGR00225960-02 FB: Support sii902x HDMI driver in ELCDIF FBSandor Yu
2012-09-29ENGR00225960-01 Sii902x HDMI: added SII902x Config variableSandor Yu
2012-09-29ENGR00225735-3 GPU: add gpu regulator disable/enable in gpu driverRobin Gong
2012-09-29ENGR00225735-2 VPU: add vpu regulator enable/disable in driverRobin Gong
2012-09-29ENGR00225735-1 PU anatop: PU regulator can be disabled/enabled by driversRobin Gong
2012-09-27ENGR00225894 MX6SL-Improve system IDLE power numbersRanjani Vaidyanathan
2012-09-27ENGR00226095-2 SPDIF: add HDMI AUDIO in device name in mx6_sl evkGary Zhang
2012-09-27ENGR00226095-1 MX6 SL: add SPDIF support in EVKGary Zhang
2012-09-27ENGR00226080 Update GC2000/GC320 AXI bus cache attributeLoren Huang
2012-09-27ENGR00226096 mx6sl: remove high set point for usdhcRyan QIAN
2012-09-27ENGR00223797-10 ARM:MX6 Kconfig:Support MX6_CLK_FOR_BOOTUI_TRANSLiu Ying
2012-09-27ENGR00223797-7 MX6 SabreSD:Fix ipuv3 fb platform driver registerLiu Ying
2012-09-27ENGR00223797-6 MX6 SabreSD:Initialize late init for IPUv3 fb pdataLiu Ying
2012-09-27ENGR00223797-5 MX6 SabreSD:Initialize bypass reset for IPUv3 pdataLiu Ying
2012-09-27ENGR00223797-4 IPUv3 fb:Support framebuffer late initLiu Ying
2012-09-27ENGR00223797-3 ARM:IPUv3 fb:Add late init in pdataLiu Ying
2012-09-27ENGR00223797-2 IPUv3:Support bypass reset for probeLiu Ying
2012-09-27ENGR00223797-1 ARM:IPUv3:Add bypass reset in pdataLiu Ying
2012-09-26ENGR00220747 V4L2 out: Fix mosaic and flash issue if use VDOA input crop modeWayne Zou
2012-09-26ENGR00225912 ARM: etm: Add trace buffer supportFrank Li
2012-09-26ARM: etm: Add sysfs entry to enable return stack if supportedArve Hjønnevåg
2012-09-26ARM: etm: Add sysfs entry to disable branch_output flagArve Hjønnevåg
2012-09-26ARM: etm: Add sysfs entry to set context-id-sizeArve Hjønnevåg
2012-09-26ARM: etm: Add sysfs entry to enable timestamps if supportedArve Hjønnevåg
2012-09-26ARM: etm: Check arch version and disable data tracing for ptmArve Hjønnevåg
2012-09-26ARM: etm: Wait for etm/ptm(s) to stop before requesting PowerDownArve Hjønnevåg
2012-09-26ARM: etm: Power down etm(s) when tracing is not enabledArve Hjønnevåg
2012-09-26ARM: etm: Support multiple ETMs/PTMs.Arve Hjønnevåg
2012-09-26ARM: etm: Return the entire trace buffer if it is empty after resetArve Hjønnevåg
2012-09-26ARM: etm: Add some missing locks and error checksArve Hjønnevåg
2012-09-26ARM: etm: Configure data tracingArve Hjønnevåg
2012-09-26ARM: etm: Allow range selectionArve Hjønnevåg
2012-09-26ARM: etm: Don't try to clear the buffer full status after reading the bufferArve Hjønnevåg
2012-09-26ARM: etm: Don't limit tracing to only non-secure code.Arve Hjønnevåg
2012-09-26ARM: etm: Don't require clock controlArve Hjønnevåg
2012-09-25ENGR00225131-06 MX6 PM: clear stop_mode_config after system resumemake shi
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-15 05:44:05 +0000