summaryrefslogtreecommitdiff
AgeCommit message (Expand)Author
2012-10-19ENGR00229905-1: adv7280 mipi csi2 tvin decoder supportAdrian Alonso
2012-10-18ENGR00230377 Sabreauto: Add eCompass supportAlejandro Sierra
2012-10-18ENGR00229725 Sabreauto: Support NAND SPINOR NOR SD on same configAlejandro Sierra
2012-10-18ENGR00225520 SDMA:fix kernel dump occasionally during I2C stress testNicolin Chen
2012-10-17ENGR00229902: mx6q sabreauto tvin use io_init callback functionAdrian Alonso
2012-10-17ENGR00229952 mxc_v4l2_capture: csi ic mem uses hard coded initial DMA base addrSheng Nan
2012-10-17ENGR00229962 Capture: ov5642/ov5640: update sensor params even if s_parm failedSheng Nan
2012-10-16ENGR00229924 MX6SL-Fix MMDC FIFO reset code.Ranjani Vaidyanathan
2012-10-16ENGR00229695 MX6x-Set RBC counters correctly in STOP mode.Ranjani Vaidyanathan
2012-10-16ENGR00229321 Integrate GPU 4.6.9p8 kernel part driverLoren Huang
2012-10-16ENGR00224964-4 mxc_v4l2_capture: change capture stream off sequenceSheng Nan
2012-10-16ENGR00224964-3 IPU: Capture: add csi wait4eof support of CSI-IC channelSheng Nan
2012-10-16ENGR00224964-2 IPU: Capture: change csi disable sequenceSheng Nan
2012-10-16ENGR00224964-1 Capture: ov5642: 5M mode works at low frame rateSheng Nan
2012-10-15ENGR00229708 [MX6SL] Fix all build warnings.Nancy Chen
2012-10-16ENGR00229630 vpu: need to manage pu regulator in suspend/resumeAnson Huang
2012-10-15ENGR00229291 EPDC: MX6: Treat fully-collided VOID update as a collisionMichael Minnick
2012-10-15ENGR00229441 MX6SL-Reset MMDC read FIFO in low power IDLERanjani Vaidyanathan
2012-10-15ENGR00223348 EPDC: Unable to enable DISPLAY regulatorJack Lee
2012-10-14ENGR00229470-2 MX6SL-Add support for debug UART to be sourced from 24MHz.Ranjani Vaidyanathan
2012-10-14ENGR00229470-1 MX6SL-Add support for debug UART to be sourced from 24MHz.Ranjani Vaidyanathan
2012-10-15ENGR00211376 Capture: ov5640_mipi: the QVGA is brighterSheng Nan
2012-10-13ENGR00229464 MX6SL-Update the SOC voltages based on datasheetRanjani Vaidyanathan
2012-10-13ENGR00229353 Capture: ov5640 mipi: XVLK rename and value changeSheng Nan
2012-10-13ENGR00229350 Capture: ov5640 mipi: duplicated define of static variableSheng Nan
2012-10-13ENGR00229323 Capture: ov5640 mipi: code type warning generated by scriptSheng Nan
2012-10-12ENGR00229437 [MX6SL] Fix AHB clock not changed to 3MHz in IDLE modeNancy Chen
2012-10-12ENGR00229299 [MX6SL] Kernel cannot boot if enable LOCKDEPNancy Chen
2012-10-12ENGR00229290 EPDC: MX6: Adjust number of LUTs for 5-bit waveformMichael Minnick
2012-10-12ENGR00227420 mmc: sdhci: shorten the delay on disabling clkRyan QIAN
2012-10-12ENGR00229354 Mx6 USB device: fix wrong handle for invalid USB_FEATURE requestsmake shi
2012-10-12ENGR00229338: usb: fix using lock before initialization problemPeter Chen
2012-10-12ENGR00229327: otp: driver causes warning when enable CONFIG_LOCKDEPTerry Lv
2012-10-12ENGR00227835 imx6q: gpmi: fix the warning when no NAND chip exitsHuang Shijie
2012-10-11ENGR00227681 IPUv3:Use spinlock to protect buf ready regLiu Ying
2012-10-11ENGR00227472 MXC V4L2 capture:Improve resource lockLiu Ying
2012-10-11ENGR00224912 mxc v4l2 capture:Correct mclk enable/disableLiu Ying
2012-10-10ENGR00225608 Camera: ov5642: improve VGA/XGA@15fps poor qualitySheng Nan
2012-10-09ENGR00227568 elcdif: fix fb wait for vsync timeout when suspend and resumeRobby Cai
2012-10-09ENGR00227502-2 mx6sl: add csi v4l2 platform deviceRobby Cai
2012-10-09ENGR00227502-1 csi/v4l2: Implement probe and remove function for csi v4l2 driverRobby Cai
2012-10-09ENGR00227477 mx6qdl: system resume fail due to DDR not accessableAnson Huang
2012-10-09ENGR00227241 mx6sl: clk: sdhc can not work at lp idle modeRyan QIAN
2012-10-09ENGR00220469 mmc: sdio: claim host on suspend and release on resumingRyan QIAN
2012-10-09ENGR00226392 MX6SL Bluetooth: Setup uart2 to enable bluetoothLionel Xu
2012-10-08ENGR00225700: ARM: mx6sl: Fix suspend/resume lockupRobert Lee
2012-10-08ENGR00227422: ARM: imx6sl: Adjust ARM and SOC stby voltagesRobert Lee
2012-10-08ENGR00227426 MX6SL-Fix bugs in low power IDLE modeRanjani Vaidyanathan
2012-10-09ENGR00227425 mx6sl: Need to save all registers before calling C functionAnson Huang
2012-10-09ENGR00227245 mx6q: Remove 400M setpoint for bus freqAnson Huang
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-14 23:35:53 +0000