summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-03-19wireless: max MSDU size for DMG networksVladimir Kondratiev
In the 802.11ad, aka DMG (Dynamic Multi-Gigabit), aka 60Ghz spec, maximum MSDU size extended to 7920 bytes. add #define for this. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-03-19mac80211: fix suspend vs. authentication raceJohannes Berg
Since Stanislaw's patch removing the quiescing code, mac80211 had a race regarding suspend vs. authentication: as cfg80211 doesn't track authentication attempts, it can't abort them. Therefore the attempts may be kept running while suspending, which can lead to all kinds of issues, in at least some cases causing an error in iwlmvm firmware. Fix this by aborting the authentication attempt when suspending. Cc: stable@vger.kernel.org Fixes: 12e7f517029d ("mac80211: cleanup generic suspend/resume procedures") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-03-19mac80211: verify deauthentication and return error on failureJohannes Berg
When still authenticating the mac80211 code handling a deauthentication requests from userspace doesn't verify that the request is valid in any way, fix that. Additionally, it never returns an error, even if there's no connection or authentication attempt, fix that as well. While at it, move the message to not print a message in the error case and to distinguish between the two cases. Also simplify the code by duplicating the cfg80211 call. Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-03-19mac80211: fix potential use-after-freeJohannes Berg
The bss struct might be freed in ieee80211_rx_bss_put(), so we shouldn't use it afterwards. Cc: stable@vger.kernel.org (3.10+) Fixes: 817cee7675237 ("mac80211: track AP's beacon rate and give it to the driver") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-03-03cfg80211: allow reprocessing of pending requestsLuis R. Rodriguez
In certain situations we want to trigger reprocessing of the last regulatory hint. One situation in which this makes sense is the case where the cfg80211 was built-in to the kernel, CFG80211_INTERNAL_REGDB was not enabled and the CRDA binary is on a partition not availble during early boot. In such a case we want to be able to re-process the same request at some other point. When we are asked to re-process the same request we need to be careful to not kfree it, addresses that. Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [rename function] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-03-03mac80211: add missing update on rx status VHT flagChun-Yeow Yeoh
Add missing update on the rx status vht flag of the last data packet. Otherwise, cfg80211_calculate_bitrate_vht may not consider the channel width resulting in wrong calculation of the received bitrate. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-03-03mac80211: refactor channel switch functionMichal Kazior
The function was quite big. This splits out beacon updating into a separate function for improved maintenance and extension. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-25cfg80211: send stop AP event only due to internal reasonIlan Peer
Commit "nl80211: send event when AP operation is stopped" added an event to notify user space that an AP interface has been stopped, to handle cases such as suspend etc. The event is sent regardless if the stop AP flow was triggered by user space or due to internal state change. This might cause issues with wpa_supplicant/hostapd flows that consider stop AP flow as a synchronous one, e.g., AP/GO channel change in the absence of CSA support. In such cases, the flow will restart the AP immediately after the stop AP flow is done, and only handle the stop AP event after the current flow is done, and as a result stop the AP again. Change the current implementation to only send the event in case the stop AP was triggered due to an internal reason. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-25cfg80211: DFS get CAC time from regulatory databaseJanusz Dziedzic
Send Channel Availability Check time as a parameter of start_radar_detection() callback. Get CAC time from regulatory database. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-25cfg80211: regulatory: allow getting DFS CAC time from userspaceJanusz Dziedzic
Introduce DFS CAC time as a regd param, configured per REG_RULE and set per channel in cfg80211. DFS CAC time is close connected with regulatory database configuration. Instead of using hardcoded values, get DFS CAC time form regulatory database. Pass DFS CAC time to user mode (mainly for iw reg get, iw list, iw info). Allow setting DFS CAC time via CRDA. Add support for internal regulatory database. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> [rewrap commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-25cfg80211: regulatory: allow user to set world regdomainJanusz Dziedzic
Allow to set world regulatory domain in case of user request (iw reg set 00). Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-25cfg80211: regulatory: simplify uevent sendingJohannes Berg
There's no need for the struct device_type with the uevent function etc., just fill the country alpha2 when sending the event. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-21mac80211: ibss: handle cfg80211_chandef_dfs_required() error codesLuciano Coelho
Error codes returned by cfg80211_chandef_dfs_required() are ignored when trying to join an IBSS. Fix this by printing an error and returning. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-21cfg80211: remove radar requirements check from cfg80211_can_use_iftype_chan()Luciano Coelho
We don't have to double check whether the parameters passed to cfg80211_can_use_iftype_chan() are correct. We should just make sure they *are* when we call this function. Remove the radar_detect argument check in cfg80211_can_use_iftype_chan() to simplify the code. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> [keep braces around a long comment + single statement] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-21nl80211: make sure we check for DFS with mesh channel switchLuciano Coelho
Since mesh support for DFS channels was added, we also need to check for DFS channels when performing a channel switch with NL80211_IFTYPE_MESHPOINT. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> [use switch statement, slight code cleanup] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-21mac80211: allow drivers to request SMPS offLuciano Coelho
Previously we were warning and using automatic when a driver sent an update request with SMPS off. This patch makes it possible for drivers to disable SMPS at runtime, for whatever reason. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-21cfg80211: docbook: add interface combinations documentationLuciano Coelho
Add the ieee80211_iface_limit and the ieee80211_iface_combination structures to docbook. Reformat the examples of combinations slightly, so it looks a bit better on docbook. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-21cfg80211: docbook: fix small formatting errorLuciano Coelho
docbook (or one of its friends) gets confused with semi-colons in the argument descriptions, causing it to think that the semi-colon is marking a new section in the description of addr_mask in wiphy struct. Prevent this by using hyphens instead of semi-colons in the mask example. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-21cfg80211: regulatory: introduce NL80211_RRF_AUTO_BW rule flagJanusz Dziedzic
Introduce NL80211_RRF_AUTO_BW rule flag. If this flag set maximum available bandwidth should be calculated base on contiguous rules and wider channels will be allowed to cross multiple contiguous/overlapping frequency ranges. In case of old kernels maximum bandwidth from regulatory rule will be used, while there is no NL80211_RRF_AUTO_BW flag. This fixes the previous commit 9752482083066af7ac18a5ca376f ("cfg80211: regulatory introduce maximum bandwidth calculation") which was found to be a problem for userspace API compatibility. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> [edit commit log, use sizeof()] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-20mac80211: allow driver to return error from sched_scan_stopJohannes Berg
In order to solve races with sched_scan_stop, it is necessary for the driver to be able to return an error to propagate that to cfg80211 so it doesn't send an event. Reviewed-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-20cfg80211: document sched_scan_stop synchronous behaviourJohannes Berg
Due to userspace assumptions, the sched_scan_stop operation must be synchronous, i.e. once it returns a new scheduled scan must be able to start immediately. Document this in the API. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-20cfg80211: Pass TDLS peer capability information in tdls_mgmtSunil Dutt Undekari
While framing the TDLS Setup Confirmation frame, the driver needs to know if the TDLS peer is VHT/HT/WMM capable and thus shall construct the VHT/HT operation / WMM parameter elements accordingly. Supplicant determines if the TDLS peer is VHT/HT/WMM capable based on the presence of the respective IEs in the received TDLS Setup Response frame. The host driver should not need to parse the received TDLS Response frame and thus, should be able to rely on the supplicant to indicate the capability of the peer through additional flags while transmitting the TDLS Setup Confirmation frame through tdls_mgmt operations. Signed-off-by: Sunil Dutt Undekari <usdutt@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-20Merge remote-tracking branch 'wireless-next/master' into mac80211-nextJohannes Berg
2014-02-13Staging: rtl8812ae: remove modules field of rate_control_opsStephen Rothwell
This has been removed in further work. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wcn36xx: Update dtim period before starting BSSPontus Fuchs
The dtim period sent to FW was 0 because the dtim period was never set. This caused an incorrect dtim count to be sent in beacons. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wcn36xx: Track dpu signature per staPontus Fuchs
This fixes problems seen with multiple softap clients and reconnecting softap clients. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wcn36xx: Rename wcn36xx_vif.ucast_dpu_signature to self_ucast_dpu_signPontus Fuchs
This is more line with the names of the other members Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wcn36xx: Add support for 3680Pontus Fuchs
3680 has a few registers on other addresses. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wcn36xx: Print FW capabilitiesPontus Fuchs
After fw caps exchange, print the FW's capabilities. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wcn36xx: Cache nv to avoid request_firmware on resume pathPontus Fuchs
If wowlan if off mac80211 will stop / start the driver on suspend / resume. This causes problems on resume since request_firmware is called from start. Fix this by caching the nv. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wcn36xx: Wait longer for SMD commands to completePontus Fuchs
On some wcnss firmwares the start command can take up to 300ms to complete. Currently there is a 200ms timeout for SMD command to complete which causes the start to fail. Increase the timeout to 500ms. Also improve debug information regarding SMD command completion time. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wcn36xx: Improve feature caps exchangePontus Fuchs
* Response format is not in the canonical format. wcn36xx_smd_rsp_status_check cannot be used. * Save the FW caps in wcn36xx struct for later use. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wcn36xx: Fix copy paste error hal_exit_bmps -> hal_keep_alivePontus Fuchs
Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore: add support for STA CSA with chan contextsArik Nemtsov
TI wl12xx/wl18xx cards support channel switch via a driver specific switch_channel op while operating with channel contexts. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore: enable beacon filtering only after receiving a beaconEliad Peller
Enabling beacon filtering before receving a beacon might result in not having a beacon at all for the current connected AP, which prevents the station from entering power-save. Replace the current approach (of starting beacon filtering on init) and configure beacon filering only after bss_conf->dtimper is set (which means mac80211 already parsed a beacon). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore: increase timeout to 5000 msecsYaniv Machani
dfs configuration command might take longer than the current timeout. increase it to 5 seconds. Signed-off-by: Yaniv Machani <yanivma@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore: decrease warning verbosity during recoveryArik Nemtsov
Silently ignore repetitive scheduling of recovery work and commands being passed to the bus when the HW is not available. This can happen many times during recovery and slow it down. It also spams the kernel logs. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore: consider multiple APs when checking active_link_countEliad Peller
Each AP has its own global and broadcast links, so when checking for active sta count (according to the active_link_count) we must take them all into account. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore: don't handle unsetting of default wep keyEliad Peller
mac80211 unsets the default wep key on disassoc. The fw doesn't support this notification, so simply ignore it. The actual flow actually triggers fw recovery in some cases, as mac80211 unsets the default key only after disassoc, when wlvif->sta.hlid, resulting in invalid hlid being passed to the fw. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore: wl18xx: allow CCK rates for AP modeArik Nemtsov
12xx chips allow only OFDM rates in AP mode for BT-Coex purposes. This is no longer required in 18xx chips, starting with FW 8.6.0.0.8. Update the min allowed FW version in 18xx to support this functionality. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore: don't stop sched_scan on interface removalBarak Bercovitz
Stopping sched scan on interface removal (during recovery) is no longer needed, as sched scanning is automatically restarted by mac80211. Signed-off-by: Barak Bercovitz <barak@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore: send EAPOL frames with voice priorityIgal Chernobelsky
Send EAPOL frames with voice priority by setting (the new) TX_HW_ATTR_EAPOL_FRAME bit in tx attribute. Sending EAPOL with voice priority fixes re-key timeout issues during heavy traffic. Signed-off-by: Igal Chernobelsky <igalc@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wl18xx: move to new firmware (wl18xx-fw-3.bin)Eliad Peller
Bump the min wl18xx fw version to 8.8.0.0.13 This fw is not backward compatible with older firmware (due to api changes), so use bump the firmware name as well. Some modifications were done to the driver-fw api in order to support multiple APs. Additionally, some of the consts (such as max stations, max links and max RX BA sessions) were changed. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore/wl12xx/wl18xx: configure iface_combinations per-hwEliad Peller
Each hw supports a different iface combinations. Define the supported combinations in each driver, and save it in wl->iface_combinations. Since each driver defines its own combinations now, it can also define its max supported channels, so we no longer need to save and set it explicitly in wlcore. Update wl18xx interface combinations to allow multiple APs. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore/wl12xx/wl18xx: configure max_stations per-hwEliad Peller
Each hw supports a different max stations (connected to the same ap). add a new wl->max_ap_stations and use it instead of the current common AP_MAX_STATIONS. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore/wl12xx/wl18xx: configure num_links per-hwEliad Peller
Upcoming fw versions will have different max links support (according to the hw). Get ready for it by configuring wl->num_links per-hw, instead of using the const WL12XX_MAX_LINKS. However, continue using WLCORE_MAX_LINKS in order to simplify structs declarations (we use it in multiple bitmaps, and converting them to dynamic arrays is just cumbersome). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore/wl12xx/wl18xx: simplify fw_status handlingEliad Peller
Instead of splitting the fw_status into 2 and using some complex calculations, read the fw status and let each low-level driver (wl12xx/wl18xx) convert it into a common struct. This is required for the upcoming fw api changes, which break the current logic anyway. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore: AP: don't start mac80211 PS on non-peer HLIDsArik Nemtsov
It seems the wl18xx FW sometimes sends spurious changes on the PSM state of the broadcast HLID. This causes us to search for a station on a non-peer link and fail, causing warnings in our log. Prevent the driver from considering PSM changes for any non-peer HLIDs. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore: block read/writes to FW during ELPBarak Bercovitz
When the chip is in ELP mode read/write to FW is invalid and may cause the lower layers to get stuck. The reads/writes concerning ELP wakeup are the exception here and are checked for. In addition to blocking the IO, produce a warning. Signed-off-by: Barak Bercovitz <barak@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-13wlcore: cancel Tx watchdog on suspend and rearm on first Tx afterArik Nemtsov
Sometimes a tx_flush during suspend fails, but the FW manages to flush out the packets during the time when the host is supsended. Cancel the Tx-watchdog on suspend to not cause a spurious recovery on resume for that case. Set a flag to reinit the watchdog on the first Tx after resume, so we'll still recover if the FW is not empty and there's indeed a problem. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-16 03:17:04 +0000