summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-09-29NFS41/flexfiles: zero out DS write wccPeng Tao
commit 5420401079e152ff68a8024f6a375804b1c21505 upstream. We do not want to update inode attributes with DS values. Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29NFSv4: Force a post-op attribute update when holding a delegationTrond Myklebust
commit aaae3f00d3f67f681a1f3cb7af999e976e8a24ce upstream. If the ctime or mtime or change attribute have changed because of an operation we initiated, we should make sure that we force an attribute update. However we do not want to mark the page cache for revalidation. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29NFS41/flexfiles: update inode after write finishesPeng Tao
commit 69f230d907e8c1ca3f9bd528993eeb98f712b0dd upstream. Otherwise we break fstest case tests/read_write/mctime.t Does files layout need the same fix as well? Cc: Anna Schumaker <anna.schumaker@netapp.com> Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29NFS: nfs_set_pgio_error sometimes misses errorsTrond Myklebust
commit e9ae58aeee8842a50f7e199d602a5ccb2e41a95f upstream. We should ensure that we always set the pgio_header's error field if a READ or WRITE RPC call returns an error. The current code depends on 'hdr->good_bytes' always being initialised to a large value, which is not always done correctly by callers. When this happens, applications may end up missing important errors. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29NFS: Fix a NULL pointer dereference of migration recovery ops for v4.2 clientKinglong Mee
commit 18e3b739fdc826481c6a1335ce0c5b19b3d415da upstream. ---Steps to Reproduce-- <nfs-server> # cat /etc/exports /nfs/referal *(rw,insecure,no_subtree_check,no_root_squash,crossmnt) /nfs/old *(ro,insecure,subtree_check,root_squash,crossmnt) <nfs-client> # mount -t nfs nfs-server:/nfs/ /mnt/ # ll /mnt/*/ <nfs-server> # cat /etc/exports /nfs/referal *(rw,insecure,no_subtree_check,no_root_squash,crossmnt,refer=/nfs/old/@nfs-server) /nfs/old *(ro,insecure,subtree_check,root_squash,crossmnt) # service nfs restart <nfs-client> # ll /mnt/*/ --->>>>> oops here [ 5123.102925] BUG: unable to handle kernel NULL pointer dereference at (null) [ 5123.103363] IP: [<ffffffffa03ed38b>] nfs4_proc_get_locations+0x9b/0x120 [nfsv4] [ 5123.103752] PGD 587b9067 PUD 3cbf5067 PMD 0 [ 5123.104131] Oops: 0000 [#1] [ 5123.104529] Modules linked in: nfsv4(OE) nfs(OE) fscache(E) nfsd(OE) xfs libcrc32c iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi coretemp crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ppdev vmw_balloon parport_pc parport i2c_piix4 shpchp auth_rpcgss nfs_acl vmw_vmci lockd grace sunrpc vmwgfx drm_kms_helper ttm drm mptspi serio_raw scsi_transport_spi e1000 mptscsih mptbase ata_generic pata_acpi [last unloaded: nfsd] [ 5123.105887] CPU: 0 PID: 15853 Comm: ::1-manager Tainted: G OE 4.2.0-rc6+ #214 [ 5123.106358] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/20/2014 [ 5123.106860] task: ffff88007620f300 ti: ffff88005877c000 task.ti: ffff88005877c000 [ 5123.107363] RIP: 0010:[<ffffffffa03ed38b>] [<ffffffffa03ed38b>] nfs4_proc_get_locations+0x9b/0x120 [nfsv4] [ 5123.107909] RSP: 0018:ffff88005877fdb8 EFLAGS: 00010246 [ 5123.108435] RAX: ffff880053f3bc00 RBX: ffff88006ce6c908 RCX: ffff880053a0d240 [ 5123.108968] RDX: ffffea0000e6d940 RSI: ffff8800399a0000 RDI: ffff88006ce6c908 [ 5123.109503] RBP: ffff88005877fe28 R08: ffffffff81c708a0 R09: 0000000000000000 [ 5123.110045] R10: 00000000000001a2 R11: ffff88003ba7f5c8 R12: ffff880054c55800 [ 5123.110618] R13: 0000000000000000 R14: ffff880053a0d240 R15: ffff880053a0d240 [ 5123.111169] FS: 0000000000000000(0000) GS:ffffffff81c27000(0000) knlGS:0000000000000000 [ 5123.111726] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5123.112286] CR2: 0000000000000000 CR3: 0000000054cac000 CR4: 00000000001406f0 [ 5123.112888] Stack: [ 5123.113458] ffffea0000e6d940 ffff8800399a0000 00000000000167d0 0000000000000000 [ 5123.114049] 0000000000000000 0000000000000000 0000000000000000 00000000a7ec82c6 [ 5123.114662] ffff88005877fe18 ffffea0000e6d940 ffff8800399a0000 ffff880054c55800 [ 5123.115264] Call Trace: [ 5123.115868] [<ffffffffa03fb44b>] nfs4_try_migration+0xbb/0x220 [nfsv4] [ 5123.116487] [<ffffffffa03fcb3b>] nfs4_run_state_manager+0x4ab/0x7b0 [nfsv4] [ 5123.117104] [<ffffffffa03fc690>] ? nfs4_do_reclaim+0x510/0x510 [nfsv4] [ 5123.117813] [<ffffffff810a4527>] kthread+0xd7/0xf0 [ 5123.118456] [<ffffffff810a4450>] ? kthread_worker_fn+0x160/0x160 [ 5123.119108] [<ffffffff816d9cdf>] ret_from_fork+0x3f/0x70 [ 5123.119723] [<ffffffff810a4450>] ? kthread_worker_fn+0x160/0x160 [ 5123.120329] Code: 4c 8b 6a 58 74 17 eb 52 48 8d 55 a8 89 c6 4c 89 e7 e8 4a b5 ff ff 8b 45 b0 85 c0 74 1c 4c 89 f9 48 8b 55 90 48 8b 75 98 48 89 df <41> ff 55 00 3d e8 d8 ff ff 41 89 c6 74 cf 48 8b 4d c8 65 48 33 [ 5123.121643] RIP [<ffffffffa03ed38b>] nfs4_proc_get_locations+0x9b/0x120 [nfsv4] [ 5123.122308] RSP <ffff88005877fdb8> [ 5123.122942] CR2: 0000000000000000 Fixes: ec011fe847 ("NFS: Introduce a vector of migration recovery ops") Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29NFSv4.1/pNFS: Fix borken function _same_data_server_addrs_locked()Trond Myklebust
commit 6f536936b79bd4b5cea8fb0e5b8b0bce8cd1ea4a upstream. - Switch back to using list_for_each_entry(). Fixes an incorrect test for list NULL termination. - Do not assume that lists are sorted. - Finally, consider an existing entry to match if it consists of a subset of the addresses in the new entry. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29NFS: Don't let the ctime override attribute barriers.Trond Myklebust
commit 7c2dad99d60c86ec686b3bfdcb787c450a7ea89f upstream. Chuck reports seeing cases where a GETATTR that happens to race with an asynchronous WRITE is overriding the file size, despite the attribute barrier being set by the writeback code. The culprit turns out to be the check in nfs_ctime_need_update(), which sees that the ctime is newer than the cached ctime, and assumes that it is safe to override the attribute barrier. This patch removes that override, and ensures that attribute barriers are always respected. Reported-by: Chuck Lever <chuck.lever@oracle.com> Fixes: a08a8cd375db9 ("NFS: Add attribute update barriers to NFS writebacks") Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29NFSv4: don't set SETATTR for O_RDONLY|O_EXCLNeilBrown
commit efcbc04e16dfa95fef76309f89710dd1d99a5453 upstream. It is unusual to combine the open flags O_RDONLY and O_EXCL, but it appears that libre-office does just that. [pid 3250] stat("/home/USER/.config", {st_mode=S_IFDIR|0700, st_size=8192, ...}) = 0 [pid 3250] open("/home/USER/.config/libreoffice/4-suse/user/extensions/buildid", O_RDONLY|O_EXCL <unfinished ...> NFSv4 takes O_EXCL as a sign that a setattr command should be sent, probably to reset the timestamps. When it was an O_RDONLY open, the SETATTR command does not identify any actual attributes to change. If no delegation was provided to the open, the SETATTR uses the all-zeros stateid and the request is accepted (at least by the Linux NFS server - no harm, no foul). If a read-delegation was provided, this is used in the SETATTR request, and a Netapp filer will justifiably claim NFS4ERR_BAD_STATEID, which the Linux client takes as a sign to retry - indefinitely. So only treat O_EXCL specially if O_CREAT was also given. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29NFSv4.1/pnfs: Fix atomicity of commit list updatesTrond Myklebust
commit 86d80f973434de24d8a807a92cd59d5ced7bd519 upstream. pnfs_layout_mark_request_commit() needs to ensure that it adds the request to the commit list atomically with all the other updates in order to prevent corruption to buckets[ds_commit_idx].wlseg due to races with pnfs_generic_clear_request_commit(). Fixes: 338d00cfef07d ("pnfs: Refactor the *_layout_mark_request_commit...") Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29nfsd: ensure that delegation stateid hash references are only put onceJeff Layton
commit 3fcbbd244ed1d20dc0eb7d48d729503992fa9b7d upstream. It's possible that a DELEGRETURN could race with (e.g.) client expiry, in which case we could end up putting the delegation hash reference more than once. Have unhash_delegation_locked return a bool that indicates whether it was already unhashed. In the case of destroy_delegation we only conditionally put the hash reference if that returns true. The other callers of unhash_delegation_locked call it while walking list_heads that shouldn't yet be detached. If we find that it doesn't return true in those cases, then throw a WARN_ON as that indicates that we have a partially hashed delegation, and that something is likely very wrong. Tested-by: Andrew W Elble <aweits@rit.edu> Tested-by: Anna Schumaker <Anna.Schumaker@netapp.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29nfsd: ensure that the ol stateid hash reference is only put onceJeff Layton
commit e85687393f3ee0a77ccca016f903d1558bb69258 upstream. When an open or lock stateid is hashed, we take an extra reference to it. When we unhash it, we drop that reference. The code however does not properly account for the case where we have two callers concurrently trying to unhash the stateid. This can lead to list corruption and the hash reference being put more than once. Fix this by having unhash_ol_stateid use list_del_init on the st_perfile list_head, and then testing to see if that list_head is empty before releasing the hash reference. This means that some of the unhashing wrappers now become bool return functions so we can test to see whether the stateid was unhashed before we put the reference. Reported-by: Andrew W Elble <aweits@rit.edu> Tested-by: Andrew W Elble <aweits@rit.edu> Reported-by: Anna Schumaker <Anna.Schumaker@netapp.com> Tested-by: Anna Schumaker <Anna.Schumaker@netapp.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29nfsd: Fix an FS_LAYOUT_TYPES/LAYOUT_TYPES encode bugKinglong Mee
commit 6896f15aabde505b35888039af93d1d182a0108a upstream. Currently we'll respond correctly to a request for either FS_LAYOUT_TYPES or LAYOUT_TYPES, but not to a request for both attributes simultaneously. Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29Btrfs: check if previous transaction aborted to avoid fs corruptionFilipe Manana
commit 1f9b8c8fbc9a4d029760b16f477b9d15500e3a34 upstream. While we are committing a transaction, it's possible the previous one is still finishing its commit and therefore we wait for it to finish first. However we were not checking if that previous transaction ended up getting aborted after we waited for it to commit, so we ended up committing the current transaction which can lead to fs corruption because the new superblock can point to trees that have had one or more nodes/leafs that were never durably persisted. The following sequence diagram exemplifies how this is possible: CPU 0 CPU 1 transaction N starts (...) btrfs_commit_transaction(N) cur_trans->state = TRANS_STATE_COMMIT_START; (...) cur_trans->state = TRANS_STATE_COMMIT_DOING; (...) cur_trans->state = TRANS_STATE_UNBLOCKED; root->fs_info->running_transaction = NULL; btrfs_start_transaction() --> starts transaction N + 1 btrfs_write_and_wait_transaction(trans, root); --> starts writing all new or COWed ebs created at transaction N creates some new ebs, COWs some existing ebs but doesn't COW or deletes eb X btrfs_commit_transaction(N + 1) (...) cur_trans->state = TRANS_STATE_COMMIT_START; (...) wait_for_commit(root, prev_trans); --> prev_trans == transaction N btrfs_write_and_wait_transaction() continues writing ebs --> fails writing eb X, we abort transaction N and set bit BTRFS_FS_STATE_ERROR on fs_info->fs_state, so no new transactions can start after setting that bit cleanup_transaction() btrfs_cleanup_one_transaction() wakes up task at CPU 1 continues, doesn't abort because cur_trans->aborted (transaction N + 1) is zero, and no checks for bit BTRFS_FS_STATE_ERROR in fs_info->fs_state are made btrfs_write_and_wait_transaction(trans, root); --> succeeds, no errors during writeback write_ctree_super(trans, root, 0); --> succeeds --> we have now a superblock that points us to some root that uses eb X, which was never written to disk In this scenario future attempts to read eb X from disk results in an error message like "parent transid verify failed on X wanted Y found Z". So fix this by aborting the current transaction if after waiting for the previous transaction we verify that it was aborted. Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29v4l: omap3isp: Fix async notifier registration orderSakari Ailus
commit 5d479386983c5f1bb1aff4f88a027b6143f88a39 upstream. The async notifier was registered before the v4l2_device was registered and before the notifier callbacks were set. This could lead to missing the bound() and complete() callbacks and to attempting to spin_lock() and uninitialised spin lock. Also fix unregistering the async notifier in the case of an error --- the function may not fail anymore after the notifier is registered. Fixes: da7f3843d2c7 ("[media] omap3isp: Add support for the Device Tree") Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Reviewed-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29v4l: xilinx: missing error codeDan Carpenter
commit e31f8f00bfc081ec1881d92a2dd192aeddf1d9d7 upstream. We should set "ret" on this error path instead of returning success. Fixes: df3305156f98 ('[media] v4l: xilinx: Add Xilinx Video IP core') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Hyun Kwon <hyun.kwon@xilinx.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29media: am437x-vpfe: Fix a race condition during releaseBenoit Parrot
commit c99235fa3ef833c3c23926085f2bb68851c8460a upstream. There was a race condition where during cleanup/release operation on-going streaming would cause a kernel panic because the hardware module was disabled prematurely with IRQ still pending. Fixes: 417d2e507edc ("[media] media: platform: add VPFE capture driver support for AM437X") Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29media: am437x-vpfe: Requested frame size and fmt overwritten by current ↵Benoit Parrot
sensor setting commit f47c9045643f91e76d8a9030828b9fe1cf4a6bcf upstream. Upon a S_FMT the input/requested frame size and pixel format is overwritten by the current sub-device settings. Fix this so application can actually set the frame size and format. Fixes: 417d2e507edc ("[media] media: platform: add VPFE capture driver support for AM437X") Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29v4l: omap3isp: Fix sub-device power management codeSakari Ailus
commit 9d39f05490115bf145e5ea03c0b7ec9d3d015b01 upstream. Commit 813f5c0ac5cc ("media: Change media device link_notify behaviour") modified the media controller link setup notification API and updated the OMAP3 ISP driver accordingly. As a side effect it introduced a bug by turning power on after setting the link instead of before. This results in sub-devices not being powered down in some cases when they should be. Fix it. Fixes: 813f5c0ac5cc [media] media: Change media device link_notify behaviour Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29rc-core: fix remove uevent generationDavid Härdeman
commit a66b0c41ad277ae62a3ae6ac430a71882f899557 upstream. The input_dev is already gone when the rc device is being unregistered so checking for its presence only means that no remove uevent will be generated. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29cxl: Don't remove AFUs/vPHBs in cxl_resetDaniel Axtens
commit 4e1efb403c1c016ae831bd9988a7d2e5e0af41a0 upstream. If the driver doesn't participate in EEH, the AFUs will be removed by cxl_remove, which will be invoked by EEH. If the driver does particpate in EEH, the vPHB needs to stick around so that the it can particpate. In both cases, we shouldn't remove the AFU/vPHB. Reviewed-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29i915: Set ddi_pll_sel in DP MST pathAnder Conselvan de Oliveira
commit 6fa2d197936ba0b8936e813d0adecefac160062b upstream. The DP MST encoder config function never sets ddi_pll_sel, even though its value is programmed in its ->pre_enable() hook. That used to work because a new pipe_config was kzalloc'ed at every modeset, and the value of zero selects the highest clock for the PLL. Starting with the commit below, the value of ddi_pll_sel is preserved through modesets, and since the correct value wasn't properly setup by the MST code, it could lead to warnings and blank screens. commit 8504c74c7ae48b4b8ed1f1c0acf67482a7f45c93 Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Date: Fri May 15 11:51:50 2015 +0300 drm/i915: Preserve ddi_pll_sel when allocating new pipe_config Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91628 Cc: Timo Aaltonen <tjaalton@ubuntu.com> Cc: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29drm/i915: Don't use link_bw for PLL setupVille Syrjälä
commit 7e6313a2516dbcd168f4ae36f0abe1a9227106b5 upstream. Use port_clock instead of link_bw when picking the PLL parameters for DP. link_bw may be zero with an eDP 1.4 sink that supports DP_LINK_RATE_SET so we shouldn't use it for anything other than feed it to the sink appropriately. v2: Fix typo in commit message (Sivakumar) Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [Jani: cherry-picked from future.] Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29x86/mm: Initialize pmd_idx in page_table_range_init_count()Minfei Huang
commit 9962eea9e55f797f05f20ba6448929cab2a9f018 upstream. The variable pmd_idx is not initialized for the first iteration of the for loop. Assign the proper value which indexes the start address. Fixes: 719272c45b82 'x86, mm: only call early_ioremap_page_table_range_init() once' Signed-off-by: Minfei Huang <mnfhuang@gmail.com> Cc: tony.luck@intel.com Cc: wangnan0@huawei.com Cc: david.vrabel@citrix.com Reviewed-by: yinghai@kernel.org Link: http://lkml.kernel.org/r/1436703522-29552-1-git-send-email-mhuang@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29mm: check if section present during memory block registeringYinghai Lu
commit 04697858d89e4bf2650364f8d6956e2554e8ef88 upstream. Tony Luck found on his setup, if memory block size 512M will cause crash during booting. BUG: unable to handle kernel paging request at ffffea0074000020 IP: get_nid_for_pfn+0x17/0x40 PGD 128ffcb067 PUD 128ffc9067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.2.0-rc8 #1 ... Call Trace: ? register_mem_sect_under_node+0x66/0xe0 register_one_node+0x17b/0x240 ? pci_iommu_alloc+0x6e/0x6e topology_init+0x3c/0x95 do_one_initcall+0xcd/0x1f0 The system has non continuous RAM address: BIOS-e820: [mem 0x0000001300000000-0x0000001cffffffff] usable BIOS-e820: [mem 0x0000001d70000000-0x0000001ec7ffefff] usable BIOS-e820: [mem 0x0000001f00000000-0x0000002bffffffff] usable BIOS-e820: [mem 0x0000002c18000000-0x0000002d6fffefff] usable BIOS-e820: [mem 0x0000002e00000000-0x00000039ffffffff] usable So there are start sections in memory block not present. For example: memory block : [0x2c18000000, 0x2c20000000) 512M first three sections are not present. The current register_mem_sect_under_node() assume first section is present, but memory block section number range [start_section_nr, end_section_nr] would include not present section. For arch that support vmemmap, we don't setup memmap for struct page area within not present sections area. So skip the pfn range that belong to absent section. [akpm@linux-foundation.org: simplification] [rientjes@google.com: more simplification] Fixes: bdee237c0343 ("x86: mm: Use 2GB memory block size on large memory x86-64 systems") Fixes: 982792c782ef ("x86, mm: probe memory block size for generic x86 64bit") Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: David Rientjes <rientjes@google.com> Reported-by: Tony Luck <tony.luck@intel.com> Tested-by: Tony Luck <tony.luck@intel.com> Cc: Greg KH <greg@kroah.com> Cc: Ingo Molnar <mingo@elte.hu> Tested-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29Add radeon suspend/resume quirk for HP Compaq dc5750.Jeffery Miller
commit 09bfda10e6efd7b65bcc29237bee1765ed779657 upstream. With the radeon driver loaded the HP Compaq dc5750 Small Form Factor machine fails to resume from suspend. Adding a quirk similar to other devices avoids the problem and the system resumes properly. Signed-off-by: Jeffery Miller <jmiller@neverware.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29CIFS: fix type confusion in copy offload ioctlJann Horn
commit 4c17a6d56bb0cad3066a714e94f7185a24b40f49 upstream. This might lead to local privilege escalation (code execution as kernel) for systems where the following conditions are met: - CONFIG_CIFS_SMB2 and CONFIG_CIFS_POSIX are enabled - a cifs filesystem is mounted where: - the mount option "vers" was used and set to a value >=2.0 - the attacker has write access to at least one file on the filesystem To attack this, an attacker would have to guess the target_tcon pointer (but guessing wrong doesn't cause a crash, it just returns an error code) and win a narrow race. Signed-off-by: Jann Horn <jann@thejh.net> Signed-off-by: Steve French <smfrench@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29powerpc/mm: Recompute hash value after a failed updateAneesh Kumar K.V
commit 36b35d5d807b7e57aff7d08e63de8b17731ee211 upstream. If we had secondary hash flag set, we ended up modifying hash value in the updatepp code path. Hence with a failed updatepp we will be using a wrong hash value for the following hash insert. Fix this by recomputing hash before insert. Without this patch we can end up with using wrong slot number in linux pte. That can result in us missing an hash pte update or invalidate which can cause memory corruption or even machine check. Fixes: 6d492ecc6489 ("powerpc/THP: Add code to handle HPTE faults for hugepages") Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Reviewed-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29powerpc/boot: Specify ABI v2 when building an LE boot wrapperBenjamin Herrenschmidt
commit 655471f54c2e395ba29ae4156ba0f49928177cc1 upstream. The kernel does it, not the boot wrapper, which breaks with some cross compilers that still default to ABI v1. Fixes: 147c05168fc8 ("powerpc/boot: Add support for 64bit little endian wrapper") Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29powerpc/pseries: Release DRC when configure_connector failsBharata B Rao
commit daebaabb5cfbe4a6f09ca0e0f8b7673efc704960 upstream. Commit f32393c943e2 ("powerpc/pseries: Correct cpu affinity for dlpar added cpus") moved dlpar_acquire_drc() call to before dlpar_configure_connector() call in dlpar_cpu_probe(), but missed to release the DRC if dlpar_configure_connector() failed. During CPU hotplug, if configure-connector fails for any reason, then this will result in subsequent CPU hotplug attempts to fail. Release the acquired DRC if dlpar_configure_connector() call fails so that the DRC is left in right isolation and allocation state for the subsequent hotplug operation to succeed. Fixes: f32393c943e2 ("powerpc/pseries: Correct cpu affinity for dlpar added cpus") Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29powerpc/powernv/pci-ioda: fix kdump with non-power-of-2 crashkernel=Nishanth Aravamudan
commit fa14486979b3a47307bcdb10f8b5baa875a5cf68 upstream. The 32-bit TCE table initialization relies on the DMA window having a size equal to a power of 2 (and checks for it explicitly). But crashkernel= has no constraint that requires a power-of-2 be specified. This causes the kdump kernel to fail to boot as none of the PCI devices (including the disk controller) are successfully initialized. After this change, the PCI devices successfully set up the 32-bit TCE table and kdump succeeds. Fixes: aca6913f5551 ("powerpc/powernv/ioda2: Introduce helpers to allocate TCE pages") Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Tested-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29powerpc/powernv/pci-ioda: fix 32-bit TCE table init in kdump kernelNishanth Aravamudan
commit bb0054552d080dd929907c5925d4bedc8bf6def7 upstream. When attempting to kdump with the 4.2 kernel, we see for each PCI device: pci 0003:01 : [PE# 000] Assign DMA32 space pci 0003:01 : [PE# 000] Setting up 32-bit TCE table at 0..80000000 pci 0003:01 : [PE# 000] Failed to create 32-bit TCE table, err -22 PCI: Domain 0004 has 8 available 32-bit DMA segments PCI: 4 PE# for a total weight of 70 pci 0004:01 : [PE# 002] Assign DMA32 space pci 0004:01 : [PE# 002] Setting up 32-bit TCE table at 0..80000000 pci 0004:01 : [PE# 002] Failed to create 32-bit TCE table, err -22 pci 0004:0d : [PE# 005] Assign DMA32 space pci 0004:0d : [PE# 005] Setting up 32-bit TCE table at 0..80000000 pci 0004:0d : [PE# 005] Failed to create 32-bit TCE table, err -22 pci 0004:0e : [PE# 006] Assign DMA32 space pci 0004:0e : [PE# 006] Setting up 32-bit TCE table at 0..80000000 pci 0004:0e : [PE# 006] Failed to create 32-bit TCE table, err -22 pci 0004:10 : [PE# 008] Assign DMA32 space pci 0004:10 : [PE# 008] Setting up 32-bit TCE table at 0..80000000 pci 0004:10 : [PE# 008] Failed to create 32-bit TCE table, err -22 and eventually the kdump kernel fails to boot as none of the PCI devices (including the disk controller) are successfully initialized. The EINVAL response is because the DMA window (the 2GB base window) is larger than the kdump kernel's reserved memory (crashkernel=, in this case specified to be 1024M). The check in question, if ((window_size > memory_hotplug_max()) || !is_power_of_2(window_size)) is a valid sanity check for pnv_pci_ioda2_table_alloc_pages(), so adjust the caller to pass in a smaller window size if our maximum memory value is smaller than the DMA window. After this change, the PCI devices successfully set up the 32-bit TCE table and kdump succeeds. The problem was seen on a Firestone machine originally. Fixes: aca6913f5551 ("powerpc/powernv/ioda2: Introduce helpers to allocate TCE pages") Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> [mpe: Coding style pedantry, use u64, change the indentation] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29crypto: vmx - Adding enable_kernel_vsx() to access VSX instructionsLeonidas Da Silva Barbosa
commit 2d6f0600b2cd755959527230ef5a6fba97bb762a upstream. vmx-crypto driver make use of some VSX instructions which are only available if VSX is enabled. Running in cases where VSX are not enabled vmx-crypto fails in a VSX exception. In order to fix this enable_kernel_vsx() was added to turn on VSX instructions for vmx-crypto. Signed-off-by: Leonidas S. Barbosa <leosilva@linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29powerpc: Uncomment and make enable_kernel_vsx() routine availableLeonidas Da Silva Barbosa
commit 72cd7b44bc99376b3f3c93cedcd052663fcdf705 upstream. enable_kernel_vsx() function was commented since anything was using it. However, vmx-crypto driver uses VSX instructions which are only available if VSX is enable. Otherwise it rises an exception oops. This patch uncomment enable_kernel_vsx() routine and makes it available. Signed-off-by: Leonidas S. Barbosa <leosilva@linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29powerpc/rtas: Introduce rtas_get_sensor_fast() for IRQ handlersThomas Huth
commit 1c2cb594441d02815d304cccec9742ff5c707495 upstream. The EPOW interrupt handler uses rtas_get_sensor(), which in turn uses rtas_busy_delay() to wait for RTAS becoming ready in case it is necessary. But rtas_busy_delay() is annotated with might_sleep() and thus may not be used by interrupts handlers like the EPOW handler! This leads to the following BUG when CONFIG_DEBUG_ATOMIC_SLEEP is enabled: BUG: sleeping function called from invalid context at arch/powerpc/kernel/rtas.c:496 in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: swapper/1 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.2.0-rc2-thuth #6 Call Trace: [c00000007ffe7b90] [c000000000807670] dump_stack+0xa0/0xdc (unreliable) [c00000007ffe7bc0] [c0000000000e1f14] ___might_sleep+0x134/0x180 [c00000007ffe7c20] [c00000000002aec0] rtas_busy_delay+0x30/0xd0 [c00000007ffe7c50] [c00000000002bde4] rtas_get_sensor+0x74/0xe0 [c00000007ffe7ce0] [c000000000083264] ras_epow_interrupt+0x44/0x450 [c00000007ffe7d90] [c000000000120260] handle_irq_event_percpu+0xa0/0x300 [c00000007ffe7e70] [c000000000120524] handle_irq_event+0x64/0xc0 [c00000007ffe7eb0] [c000000000124dbc] handle_fasteoi_irq+0xec/0x260 [c00000007ffe7ef0] [c00000000011f4f0] generic_handle_irq+0x50/0x80 [c00000007ffe7f20] [c000000000010f3c] __do_irq+0x8c/0x200 [c00000007ffe7f90] [c0000000000236cc] call_do_irq+0x14/0x24 [c00000007e6f39e0] [c000000000011144] do_IRQ+0x94/0x110 [c00000007e6f3a30] [c000000000002594] hardware_interrupt_common+0x114/0x180 Fix this issue by introducing a new rtas_get_sensor_fast() function that does not use rtas_busy_delay() - and thus can only be used for sensors that do not cause a BUSY condition - known as "fast" sensors. The EPOW sensor is defined to be "fast" in sPAPR - mpe. Fixes: 587f83e8dd50 ("powerpc/pseries: Use rtas_get_sensor in RAS code") Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29powerpc/mm: Fix pte_pagesize_index() crash on 4K w/64K hashMichael Ellerman
commit 74b5037baa2011a2799e2c43adde7d171b072f9e upstream. The powerpc kernel can be built to have either a 4K PAGE_SIZE or a 64K PAGE_SIZE. However when built with a 4K PAGE_SIZE there is an additional config option which can be enabled, PPC_HAS_HASH_64K, which means the kernel also knows how to hash a 64K page even though the base PAGE_SIZE is 4K. This is used in one obscure configuration, to support 64K pages for SPU local store on the Cell processor when the rest of the kernel is using 4K pages. In this configuration, pte_pagesize_index() is defined to just pass through its arguments to get_slice_psize(). However pte_pagesize_index() is called for both user and kernel addresses, whereas get_slice_psize() only knows how to handle user addresses. This has been broken forever, however until recently it happened to work. That was because in get_slice_psize() the large kernel address would cause the right shift of the slice mask to return zero. However in commit 7aa0727f3302 ("powerpc/mm: Increase the slice range to 64TB"), the get_slice_psize() code was changed so that instead of a right shift we do an array lookup based on the address. When passed a kernel address this means we index way off the end of the slice array and return random junk. That is only fatal if we happen to hit something non-zero, but when we do return a non-zero value we confuse the MMU code and eventually cause a check stop. This fix is ugly, but simple. When we're called for a kernel address we return 4K, which is always correct in this configuration, otherwise we use the slice mask. Fixes: 7aa0727f3302 ("powerpc/mm: Increase the slice range to 64TB") Reported-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29powerpc/eeh: Fix fenced PHB caused by eeh_slot_error_detail()Gavin Shan
commit 259800135c654a098d9f0adfdd3d1f20eef1f231 upstream. The config space of some PCI devices can't be accessed when their PEs are in frozen state. Otherwise, fenced PHB might be seen. Those PEs are identified with flag EEH_PE_CFG_RESTRICTED, meaing EEH_PE_CFG_BLOCKED is set automatically when the PE is put to frozen state (EEH_PE_ISOLATED). eeh_slot_error_detail() restores PCI device BARs with eeh_pe_restore_bars(), which then calls eeh_ops->restore_config() to reinitialize the PCI device in (OPAL) firmware. eeh_ops->restore_config() produces PCI config access that causes fenced PHB. The problem was reported on below adapter: 0001:01:00.0 0200: 14e4:168e (rev 10) 0001:01:00.0 Ethernet controller: Broadcom Corporation \ NetXtreme II BCM57810 10 Gigabit Ethernet (rev 10) This fixes the issue by skipping eeh_pe_restore_bars() in eeh_slot_error_detail() when EEH_PE_CFG_BLOCKED is set for the PE. Fixes: b6541db1 ("powerpc/eeh: Block PCI config access upon frozen PE") Reported-by: Manvanthara B. Puttashankar <mputtash@in.ibm.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29powerpc/eeh: Probe after unbalanced kref checkDaniel Axtens
commit e642d11bdbfe8eb10116ab3959a2b5d75efda832 upstream. In the complete hotplug case, EEH PEs are supposed to be released and set to NULL. Normally, this is done by eeh_remove_device(), which is called from pcibios_release_device(). However, if something is holding a kref to the device, it will not be released, and the PE will remain. eeh_add_device_late() has a check for this which will explictly destroy the PE in this case. This check in eeh_add_device_late() occurs after a call to eeh_ops->probe(). On PowerNV, probe is a pointer to pnv_eeh_probe(), which will exit without probing if there is an existing PE. This means that on PowerNV, devices with outstanding krefs will not be rediscovered by EEH correctly after a complete hotplug. This is affecting CXL (CAPI) devices in the field. Put the probe after the kref check so that the PE is destroyed and affected devices are correctly rediscovered by EEH. Fixes: d91dafc02f42 ("powerpc/eeh: Delay probing EEH device during hotplug") Cc: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Daniel Axtens <dja@axtens.net> Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29powerpc/pseries: Fix corrupted pdn listGavin Shan
commit 590c7567a2895f939525ead57b0334c6d47986f0 upstream. Commit cca87d30 ("powerpc/pci: Refactor pci_dn") introduced pdn list for SRIOV VFs. It means the pdn is be put into the child list of its parent pdn when the pdn is created. When doing PCI hot unplugging on pSeries, the PCI device node as well as its pdn are released through procfs entry "powerpc/ofdt". Some one else grabs the memory chunk of the pdn and update it accordingly. At the same time, the pdn is still tracked in the child list of parent pdn. It leads to corrupted child list in the parent pdn. This fixes above issue by removing the pdn from the child list of its parent pdn when the device node is detached from the system. Note the pdn is free'd when the device node is released if the device node is dynamic one. Otherwise, the device node as well as the pdn won't be released. Fixes: cca87d30 ("powerpc/pci: Refactor pci_dn") Reported-by: Santwana Samantray <santwana.samantray@in.ibm.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29pinctrl: at91: fix null pointer dereferenceDavid Dueck
commit 1ab36387ea4face01aac3560b396b1e2ce07c4ff upstream. Not all gpio banks are necessarily enabled, in the current code this can lead to null pointer dereferences. [ 51.130000] Unable to handle kernel NULL pointer dereference at virtual address 00000058 [ 51.130000] pgd = dee04000 [ 51.130000] [00000058] *pgd=3f66d831, *pte=00000000, *ppte=00000000 [ 51.140000] Internal error: Oops: 17 [#1] ARM [ 51.140000] Modules linked in: [ 51.140000] CPU: 0 PID: 1664 Comm: cat Not tainted 4.1.1+ #6 [ 51.140000] Hardware name: Atmel SAMA5 [ 51.140000] task: df6dd880 ti: dec60000 task.ti: dec60000 [ 51.140000] PC is at at91_pinconf_get+0xb4/0x200 [ 51.140000] LR is at at91_pinconf_get+0xb4/0x200 [ 51.140000] pc : [<c01e71a0>] lr : [<c01e71a0>] psr: 600f0013 sp : dec61e48 ip : 600f0013 fp : df522538 [ 51.140000] r10: df52250c r9 : 00000058 r8 : 00000068 [ 51.140000] r7 : 00000000 r6 : df53c910 r5 : 00000000 r4 : dec61e7c [ 51.140000] r3 : 00000000 r2 : c06746d4 r1 : 00000000 r0 : 00000003 [ 51.140000] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 51.140000] Control: 10c53c7d Table: 3ee04059 DAC: 00000015 [ 51.140000] Process cat (pid: 1664, stack limit = 0xdec60208) [ 51.140000] Stack: (0xdec61e48 to 0xdec62000) [ 51.140000] 1e40: 00000358 00000000 df522500 ded15f80 c05a9d08 ded15f80 [ 51.140000] 1e60: 0000048c 00000061 df522500 ded15f80 c05a9d08 c01e7304 ded15f80 00000000 [ 51.140000] 1e80: c01e6008 00000060 0000048c c01e6034 c01e5f6c ded15f80 dec61ec0 00000000 [ 51.140000] 1ea0: 00020000 ded6f280 dec61f80 00000001 00000001 c00ae0b8 b6e80000 ded15fb0 [ 51.140000] 1ec0: 00000000 00000000 df4bc974 00000055 00000800 ded6f280 b6e80000 ded6f280 [ 51.140000] 1ee0: ded6f280 00020000 b6e80000 00000000 00020000 c0090dec c0671e1c dec61fb0 [ 51.140000] 1f00: b6f8b510 00000001 00004201 c000924c 00000000 00000003 00000003 00000000 [ 51.140000] 1f20: df4bc940 00022000 00000022 c066e188 b6e7f000 c00836f4 000b6e7f ded6f280 [ 51.140000] 1f40: ded6f280 b6e80000 dec61f80 ded6f280 00020000 c0091508 00000000 00000003 [ 51.140000] 1f60: 00022000 00000000 00000000 ded6f280 ded6f280 00020000 b6e80000 c0091d9c [ 51.140000] 1f80: 00000000 00000000 ffffffff 00020000 00020000 b6e80000 00000003 c000f124 [ 51.140000] 1fa0: dec60000 c000efa0 00020000 00020000 00000003 b6e80000 00020000 000271c4 [ 51.140000] 1fc0: 00020000 00020000 b6e80000 00000003 7fffe000 00000000 00000000 00020000 [ 51.140000] 1fe0: 00000000 bef50b64 00013835 b6f29c76 400f0030 00000003 00000000 00000000 [ 51.140000] [<c01e71a0>] (at91_pinconf_get) from [<c01e7304>] (at91_pinconf_dbg_show+0x18/0x2c0) [ 51.140000] [<c01e7304>] (at91_pinconf_dbg_show) from [<c01e6034>] (pinconf_pins_show+0xc8/0xf8) [ 51.140000] [<c01e6034>] (pinconf_pins_show) from [<c00ae0b8>] (seq_read+0x1a0/0x464) [ 51.140000] [<c00ae0b8>] (seq_read) from [<c0090dec>] (__vfs_read+0x20/0xd0) [ 51.140000] [<c0090dec>] (__vfs_read) from [<c0091508>] (vfs_read+0x7c/0x108) [ 51.140000] [<c0091508>] (vfs_read) from [<c0091d9c>] (SyS_read+0x40/0x94) [ 51.140000] [<c0091d9c>] (SyS_read) from [<c000efa0>] (ret_fast_syscall+0x0/0x3c) [ 51.140000] Code: eb010ec2 e30a0d08 e34c005a eb0ae5a7 (e5993000) [ 51.150000] ---[ end trace fb3c370da3ea4794 ]--- Fixes: a0b957f306fa ("pinctrl: at91: allow to have disabled gpio bank") Signed-off-by: David Dueck <davidcdueck@googlemail.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29pinctrl: mediatek: Fix multiple registration issue.Hongzhou Yang
commit d48c2c02645392483f2b88b050d21ce1db6997b3 upstream. Since our common driver need support main chip and PMU at the same time, that means it will register two pinctrl device, and the pinctrl_desc structure should be used two times. But pinctrl_desc use global static definition, then the latest registered pinctrl device will overwrite the old one's, all members in pinctrl_desc will set to the new one's, such as name, pins and pins numbers, etc. This is a bug. Move pinctrl_desc into mtk_pinctrl, assign new value for each pinctrl device to fix it. Signed-off-by: Hongzhou Yang <hongzhou.yang@mediatek.com> Reviewed-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29ALSA: hda - Fix white noise on Dell M3800Niranjan Sivakumar
commit 467e1436ba85f78b8c4610c4549eb255a8211c42 upstream. The M3800 is very minor workstation variant of the XPS 15 which has already been patched for this issue. I figured it's probably more important for this version of the laptop to be patched than the regular XPS as Dell sells is pre-configured with Ubuntu to be used as a Linux workstation. I have tested the patch on my the hardware on Linux 4.2.0. Signed-off-by: Niranjan Sivakumar <ns253@cornell.edu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29ALSA: hda - Add some FIXUP quirks for white noise on Dell laptop.Woodrow Shen
commit 1adecc6755e1e4193b5618ddb2e107f6d6e88f4b upstream. Dell laptop has a series model to use the same codec but different subsystem ID. At the same time they happens the white noise by login screen and headphone; for fixing them together, I only can add these IDs to FIXUP function ALC292_FIXUP_DISABLE_AAMIX, then try to solve such the similar issues. Codec: Realtek ALC3235 Vendor Id: 0x10ec0293 Subsystem Id: 0x102806dd Subsystem Id: 0x102806df Subsystem Id: 0x102806e0 BugLink: https://bugs.launchpad.net/bugs/1492132 Signed-off-by: Woodrow Shen <woodrow.shen@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29ALSA: hda - Use ALC880_FIXUP_FUJITSU for FSC Amilo M1437Takashi Iwai
commit a161574e200ae63a5042120e0d8c36830e81bde3 upstream. It turned out that the machine has a bass speaker, so take a correct fixup entry. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=102501 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29ALSA: hda - Enable headphone jack detect on old Fujitsu laptopsTakashi Iwai
commit bb148bdeb0ab16fc0ae8009799471e4d7180073b upstream. According to the bug report, FSC Amilo laptops with ALC880 can detect the headphone jack but currently the driver disables it. It's partly intentionally, as non-working jack detect was reported in the past. Let's enable now. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=102501 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29ALSA: hda - Fix missing inline for dummy snd_hdac_set_codec_wakeup()Takashi Iwai
commit 6869de380e8c11c31b608bb2502dcacd634eda13 upstream. This seems overlooked. Fixes: 98d8fc6c5d36 ('ALSA: hda - Move hda_i915.c from sound/pci/hda to sound/hda') Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29ALSA: usb-audio: correct the value cache check.Yao-Wen Mao
commit 6aa6925cad06159dc6e25857991bbc4960821242 upstream. The check of cval->cached should be zero-based (including master channel). Signed-off-by: Yao-Wen Mao <yaowen@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29Input: evdev - do not report errors form flush()Takashi Iwai
commit eb38f3a4f6e86f8bb10a3217ebd85ecc5d763aae upstream. We've got bug reports showing the old systemd-logind (at least system-210) aborting unexpectedly, and this turned out to be because of an invalid error code from close() call to evdev devices. close() is supposed to return only either EINTR or EBADFD, while the device returned ENODEV. logind was overreacting to it and decided to kill itself when an unexpected error code was received. What a tragedy. The bad error code comes from flush fops, and actually evdev_flush() returns ENODEV when device is disconnected or client's access to it is revoked. But in these cases the fact that flush did not actually happen is not an error, but rather normal behavior. For non-disconnected devices result of flush is also not that interesting as there is no potential of data loss and even if it fails application has no way of handling the error. Because of that we are better off always returning success from evdev_flush(). Also returning EINTR from flush()/close() is discouraged (as it is not clear how application should handle this error), so let's stop taking evdev->mutex interruptibly. Bugzilla: http://bugzilla.suse.com/show_bug.cgi?id=939834 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29arm64: KVM: Disable virtual timer even if the guest is not using itMarc Zyngier
commit c4cbba9fa078f55d9f6d081dbb4aec7cf969e7c7 upstream. When running a guest with the architected timer disabled (with QEMU and the kernel_irqchip=off option, for example), it is important to make sure the timer gets turned off. Otherwise, the guest may try to enable it anyway, leading to a screaming HW interrupt. The fix is to unconditionally turn off the virtual timer on guest exit. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29KVM: arm64: add workaround for Cortex-A57 erratum #852523Will Deacon
commit 43297dda0a51e4ffed0888ce727c218cfb7474b6 upstream. When restoring the system register state for an AArch32 guest at EL2, writes to DACR32_EL2 may not be correctly synchronised by Cortex-A57, which can lead to the guest effectively running with junk in the DACR and running into unexpected domain faults. This patch works around the issue by re-ordering our restoration of the AArch32 register aliases so that they happen before the AArch64 system registers. Ensuring that the registers are restored in this order guarantees that they will be correctly synchronised by the core. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-29arm/arm64: KVM: vgic: Check for !irqchip_in_kernel() when mapping resourcesPavel Fedin
commit c2f58514cfb374d5368c9da945f1765cd48eb0da upstream. Until b26e5fdac43c ("arm/arm64: KVM: introduce per-VM ops"), kvm_vgic_map_resources() used to include a check on irqchip_in_kernel(), and vgic_v2_map_resources() still has it. But now vm_ops are not initialized until we call kvm_vgic_create(). Therefore kvm_vgic_map_resources() can being called without a VGIC, and we die because vm_ops.map_resources is NULL. Fixing this restores QEMU's kernel-irqchip=off option to a working state, allowing to use GIC emulation in userspace. Fixes: b26e5fdac43c ("arm/arm64: KVM: introduce per-VM ops") Signed-off-by: Pavel Fedin <p.fedin@samsung.com> [maz: reworked commit message] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2026-07-28 21:50:39 +0000