summaryrefslogtreecommitdiff
AgeCommit message (Expand)Author
2019-03-28ARM: dts: colibri_imx6: fix mcp2515 labelsMarcel Ziswiler
2019-03-20imx6qdl-colibri.dtsi: UHS-I support for v1.1a hwIgor Opaniuk
2019-03-12ARM: dts: Add sleep state to the sd-card pinsPhilippe Schenker
2019-03-12net: can: flexcan: Add pinmuxing in runtime_supsendPhilippe Schenker
2019-03-12ARM: dts: Add Apalis iMX6 Ixora v1.2Philippe Schenker
2019-03-11ARM: dts: imx6: Add sleep state to can interfacesPhilippe Schenker
2019-02-27fbcon: fix showing of logo for hdmiTroy Kisky
2019-02-27logo: add fb_logos_freedTroy Kisky
2019-02-27mxc_ipuv3_fb: clear frame buffer when line length changesTroy Kisky
2019-02-19ARM: dts: imx6qdl-colibri: add phy to fecPhilippe Schenker
2019-01-30imx_thermal.c: Use new temperature trip point valuesPhilippe Schenker
2019-01-29apalis/colibri imx6/7/ull: defconfig: Add nf_filterPhilippe Schenker
2019-01-17ARM: dts: imx6ull: let PHY clock muxed as clock during sleepPhilippe Schenker
2019-01-17ARM: dts: imx6ull: Add phy-supply to fecPhilippe Schenker
2019-01-17Regulator: Core: Add clock-enable to fixed-regulatorPhilippe Schenker
2019-01-17Revert "mmc: sdhci-esdhc-imx: make sure runtime PM is suspended in system sus...Philippe Schenker
2019-01-10imx6ull: usdhc1: Add sleep state to cd-pinPhilippe Schenker
2018-12-27imx_thermal.c: Use old trip point values from BSP 2.7Colibri-iMX7_LXDE-Image_2.8b5.156-20181228Colibri-iMX6_LXDE-Image_2.8b5.156-20181228Colibri-iMX6ULL_LXDE-Image_2.8b5.156-20181228Apalis-iMX6_LXDE-Image_2.8b5.156-20181228Philippe Schenker
2018-12-27ARM: dts: imx6: add missing uart transceiver enable pinmuxPhilippe Schenker
2018-12-27ARM: dts: imx6ull: improve can templatesMax Krummenacher
2018-12-27phy: micrel: do not use power down modeStefan Agner
2018-12-27net: phy-micrel: check return code in flp center functionMax Uvarov
2018-12-27ARM: dts: imx6ull: add sleep mode to fecPhilippe Schenker
2018-12-27Input: atmel_mxt_ts - fix reset-gpio for level based irqsSebastian Reichel
2018-12-27Revert "MLK-16769-5: mtd: gpmi-nand runtime pm code change"Marcel Ziswiler
2018-12-27Revert "MLK-18724-3 clk: imx7d: remove IMX7D_NAND_USDHC_BUS_ROOT_CLK out from...Marcel Ziswiler
2018-12-27colibri_imx7: make sure module supplies are always onMarcel Ziswiler
2018-12-24arm: dts: apalis imx6/colibri imx6ull/imx7: fix input includeMarcel Ziswiler
2018-12-24colibri-imx7: defconfig: enable psci supportMarcel Ziswiler
2018-12-24apalis/colibri_imx6_defconfig: re-order kernel configurationsMarcel Ziswiler
2018-12-24arm: imx: fix handling power stuff without psciMarcel Ziswiler
2018-12-24ASoC: fsl_esai, fsl_spdif: fix DMA workaroundMarcel Ziswiler
2018-12-24ARM: dts: imx6ull: fix pwm clockMax Krummenacher
2018-12-24ARM: dts: imx6ull: include all needed definitionsMax Krummenacher
2018-12-24ASoC: sgtl5000: Allow LRCLK pad drive strength to be changedFabio Estevam
2018-12-24video: fbdev: mxsfb: honor native-modeStefan Agner
2018-12-24video: mxsfb: simplify parsingStefan Agner
2018-12-24video: fbdev: mxsfb: fix pixelclock polarityStefan Agner
2018-12-24chipidea: make usb charger optionalMax Krummenacher
2018-12-24tty: serial: imx: fix merge inconsistencyMarcel Ziswiler
2018-12-24ARM: dts: imx6ull-colibri: reduce v_batt current in power offMax Krummenacher
2018-12-24ARM: dts: imx7-colibri: disable HS400Stefan Agner
2018-12-24mmc: sdhci: dt: Add device tree properties sdhci-caps and sdhci-caps-maskZach Brown
2018-12-24ARM: dts: imx6: remove 1.8V regulatorStefan Agner
2018-12-24ARM: dts: imx6ull-colibri-aster: Add support for Aster with Colibri iMX6ULLMax Krummenacher
2018-12-24ARM: dts: imx7-colibri: unify settings for FlexCANMax Krummenacher
2018-12-24imx6ull-colibri.dtsi: change touch i2c parametersMax Krummenacher
2018-12-24imx6qdl-apalis.dtsi: card detect pins: use pull up and hysteresisMax Krummenacher
2018-12-24arm: dts: correct VDDA in SGTL5000 for imx6 modules.Gerard Salvatella
2018-12-24ARM: dts: Coibri iMX6ULL: use wdog HW signal for resetMax Krummenacher
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-16 03:10:32 +0000