summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-05-06ocfs2: do not put bh when buffer_uptodate failedalex chen
commit f7cf4f5bfe073ad792ab49c04f247626b3e38db6 upstream. Do not put bh when buffer_uptodate failed in ocfs2_write_block and ocfs2_write_super_or_backup, because it will put bh in b_end_io. Otherwise it will hit a warning "VFS: brelse: Trying to free free buffer". Signed-off-by: Alex Chen <alex.chen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06ocfs2: dlm: fix recovery hungJunxiao Bi
commit ded2cf71419b9353060e633b59e446c42a6a2a09 upstream. There is a race window in dlm_do_recovery() between dlm_remaster_locks() and dlm_reset_recovery() when the recovery master nearly finish the recovery process for a dead node. After the master sends FINALIZE_RECO message in dlm_remaster_locks(), another node may become the recovery master for another dead node, and then send the BEGIN_RECO message to all the nodes included the old master, in the handler of this message dlm_begin_reco_handler() of old master, dlm->reco.dead_node and dlm->reco.new_master will be set to the second dead node and the new master, then in dlm_reset_recovery(), these two variables will be reset to default value. This will cause new recovery master can not finish the recovery process and hung, at last the whole cluster will hung for recovery. old recovery master: new recovery master: dlm_remaster_locks() become recovery master for another dead node. dlm_send_begin_reco_message() dlm_begin_reco_handler() { if (dlm->reco.state & DLM_RECO_STATE_FINALIZE) { return -EAGAIN; } dlm_set_reco_master(dlm, br->node_idx); dlm_set_reco_dead_node(dlm, br->dead_node); } dlm_reset_recovery() { dlm_set_reco_dead_node(dlm, O2NM_INVALID_NODE_NUM); dlm_set_reco_master(dlm, O2NM_INVALID_NODE_NUM); } will hang in dlm_remaster_locks() for request dlm locks info Before send FINALIZE_RECO message, recovery master should set DLM_RECO_STATE_FINALIZE for itself and clear it after the recovery done, this can break the race windows as the BEGIN_RECO messages will not be handled before DLM_RECO_STATE_FINALIZE flag is cleared. A similar race may happen between new recovery master and normal node which is in dlm_finalize_reco_handler(), also fix it. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com> Reviewed-by: Wengang Wang <wen.gang.wang@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06ocfs2: dlm: fix lock migration crashJunxiao Bi
commit 34aa8dac482f1358d59110d5e3a12f4351f6acaa upstream. This issue was introduced by commit 800deef3f6f8 ("ocfs2: use list_for_each_entry where benefical") in 2007 where it replaced list_for_each with list_for_each_entry. The variable "lock" will point to invalid data if "tmpq" list is empty and a panic will be triggered due to this. Sunil advised reverting it back, but the old version was also not right. At the end of the outer for loop, that list_for_each_entry will also set "lock" to an invalid data, then in the next loop, if the "tmpq" list is empty, "lock" will be an stale invalid data and cause the panic. So reverting the list_for_each back and reset "lock" to NULL to fix this issue. Another concern is that this seemes can not happen because the "tmpq" list should not be empty. Let me describe how. old lock resource owner(node 1): migratation target(node 2): image there's lockres with a EX lock from node 2 in granted list, a NR lock from node x with convert_type EX in converting list. dlm_empty_lockres() { dlm_pick_migration_target() { pick node 2 as target as its lock is the first one in granted list. } dlm_migrate_lockres() { dlm_mark_lockres_migrating() { res->state |= DLM_LOCK_RES_BLOCK_DIRTY; wait_event(dlm->ast_wq, !dlm_lockres_is_dirty(dlm, res)); //after the above code, we can not dirty lockres any more, // so dlm_thread shuffle list will not run downconvert lock from EX to NR upconvert lock from NR to EX <<< migration may schedule out here, then <<< node 2 send down convert request to convert type from EX to <<< NR, then send up convert request to convert type from NR to <<< EX, at this time, lockres granted list is empty, and two locks <<< in the converting list, node x up convert lock followed by <<< node 2 up convert lock. // will set lockres RES_MIGRATING flag, the following // lock/unlock can not run dlm_lockres_release_ast(dlm, res); } dlm_send_one_lockres() dlm_process_recovery_data() for (i=0; i<mres->num_locks; i++) if (ml->node == dlm->node_num) for (j = DLM_GRANTED_LIST; j <= DLM_BLOCKED_LIST; j++) { list_for_each_entry(lock, tmpq, list) if (lock) break; <<< lock is invalid as grant list is empty. } if (lock->ml.node != ml->node) BUG() >>> crash here } I see the above locks status from a vmcore of our internal bug. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Wengang Wang <wen.gang.wang@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06hung_task: check the value of "sysctl_hung_task_timeout_sec"Liu Hua
commit 80df28476505ed4e6701c3448c63c9229a50c655 upstream. As sysctl_hung_task_timeout_sec is unsigned long, when this value is larger then LONG_MAX/HZ, the function schedule_timeout_interruptible in watchdog will return immediately without sleep and with print : schedule_timeout: wrong timeout value ffffffffffffff83 and then the funtion watchdog will call schedule_timeout_interruptible again and again. The screen will be filled with "schedule_timeout: wrong timeout value ffffffffffffff83" This patch does some check and correction in sysctl, to let the function schedule_timeout_interruptible allways get the valid parameter. Signed-off-by: Liu Hua <sdu.liu@huawei.com> Tested-by: Satoru Takeuchi <satoru.takeuchi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06mm: hugetlb: fix softlockup when a large number of hugepages are freed.Mizuma, Masayoshi
commit 55f67141a8927b2be3e51840da37b8a2320143ed upstream. When I decrease the value of nr_hugepage in procfs a lot, softlockup happens. It is because there is no chance of context switch during this process. On the other hand, when I allocate a large number of hugepages, there is some chance of context switch. Hence softlockup doesn't happen during this process. So it's necessary to add the context switch in the freeing process as same as allocating process to avoid softlockup. When I freed 12 TB hugapages with kernel-2.6.32-358.el6, the freeing process occupied a CPU over 150 seconds and following softlockup message appeared twice or more. $ echo 6000000 > /proc/sys/vm/nr_hugepages $ cat /proc/sys/vm/nr_hugepages 6000000 $ grep ^Huge /proc/meminfo HugePages_Total: 6000000 HugePages_Free: 6000000 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB $ echo 0 > /proc/sys/vm/nr_hugepages BUG: soft lockup - CPU#16 stuck for 67s! [sh:12883] ... Pid: 12883, comm: sh Not tainted 2.6.32-358.el6.x86_64 #1 Call Trace: free_pool_huge_page+0xb8/0xd0 set_max_huge_pages+0x128/0x190 hugetlb_sysctl_handler_common+0x113/0x140 hugetlb_sysctl_handler+0x1e/0x20 proc_sys_call_handler+0x97/0xd0 proc_sys_write+0x14/0x20 vfs_write+0xb8/0x1a0 sys_write+0x51/0x90 __audit_syscall_exit+0x265/0x290 system_call_fastpath+0x16/0x1b I have not confirmed this problem with upstream kernels because I am not able to prepare the machine equipped with 12TB memory now. However I confirmed that the amount of decreasing hugepages was directly proportional to the amount of required time. I measured required times on a smaller machine. It showed 130-145 hugepages decreased in a millisecond. Amount of decreasing Required time Decreasing rate hugepages (msec) (pages/msec) ------------------------------------------------------------ 10,000 pages == 20GB 70 - 74 135-142 30,000 pages == 60GB 208 - 229 131-144 It means decrement of 6TB hugepages will trigger softlockup with the default threshold 20sec, in this decreasing rate. Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06sh: fix format string bug in stack tracerMatt Fleming
commit a0c32761e73c9999cbf592b702f284221fea8040 upstream. Kees reported the following error: arch/sh/kernel/dumpstack.c: In function 'print_trace_address': arch/sh/kernel/dumpstack.c:118:2: error: format not a string literal and no format arguments [-Werror=format-security] Use the "%s" format so that it's impossible to interpret 'data' as a format string. Signed-off-by: Matt Fleming <matt.fleming@intel.com> Reported-by: Kees Cook <keescook@chromium.org> Acked-by: Kees Cook <keescook@chromium.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06USB: unbind all interfaces before rebinding anyAlan Stern
commit 6aec044cc2f5670cf3b143c151c8be846499bd15 upstream. When a driver doesn't have pre_reset, post_reset, or reset_resume methods, the USB core unbinds that driver when its device undergoes a reset or a reset-resume, and then rebinds it afterward. The existing straightforward implementation can lead to problems, because each interface gets unbound and rebound before the next interface is handled. If a driver claims additional interfaces, the claim may fail because the old binding instance may still own the additional interface when the new instance tries to claim it. This patch fixes the problem by first unbinding all the interfaces that are marked (i.e., their needs_binding flag is set) and then rebinding all of them. The patch also makes the helper functions in driver.c a little more uniform and adjusts some out-of-date comments. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: "Poulain, Loic" <loic.poulain@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06hvc: ensure hvc_init is only ever called once in hvc_console.cPaul Gortmaker
commit f76a1cbed18c86e2d192455f0daebb48458965f3 upstream. Commit 3e6c6f630a5282df8f3393a59f10eb9c56536d23 ("Delay creation of khcvd thread") moved the call of hvc_init from being a device_initcall into hvc_alloc, and used a non-null hvc_driver as indication of whether hvc_init had already been called. The problem with this is that hvc_driver is only assigned a value at the bottom of hvc_init, and so there is a window where multiple hvc_alloc calls can be in progress at the same time and hence try and call hvc_init multiple times. Previously the use of device_init guaranteed that hvc_init was only called once. This manifests itself as sporadic instances of two hvc_init calls racing each other, and with the loser of the race getting -EBUSY from tty_register_driver() and hence that virtual console fails: Couldn't register hvc console driver virtio-ports vport0p1: error -16 allocating hvc for port Here we add an atomic_t to guarantee we'll never run hvc_init twice. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Fixes: 3e6c6f630a52 ("Delay creation of khcvd thread") Reported-by: Jim Somerville <Jim.Somerville@windriver.com> Tested-by: Jim Somerville <Jim.Somerville@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06usb: dwc3: fix wrong bit mask in dwc3_event_devtHuang Rui
commit 06f9b6e59661cee510b04513b13ea7927727d758 upstream. Around DWC USB3 2.30a release another bit has been added to the Device-Specific Event (DEVT) Event Information (EvtInfo) bitfield. Because of that, what used to be 8 bits long, has become 9 bits long. Per dwc3 2.30a+ spec in the Device-Specific Event (DEVT), the field of Event Information Bits(EvtInfo) uses [24:16] bits, and it has 9 bits not 8 bits. And the following reserved field uses [31:25] bits not [31:24] bits, and it has 7 bits. So in dwc3_event_devt, the bit mask should be: event_info [24:16] 9 bits reserved31_25 [31:25] 7 bits This patch makes sure that newer core releases will work fine with Linux and that we will decode the event information properly on new core releases. [ balbi@ti.com : improve commit log a bit ] Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06usb/xhci: fix compilation warning when !CONFIG_PCI && !CONFIG_PMDavid Cohen
commit 01bb59ebffdec314da8da66266edf29529372f9b upstream. When CONFIG_PCI and CONFIG_PM are not selected, xhci.c gets this warning: drivers/usb/host/xhci.c:409:13: warning: ‘xhci_msix_sync_irqs’ defined but not used [-Wunused-function] Instead of creating nested #ifdefs, this patch fixes it by defining the xHCI PCI stubs as inline. This warning has been in since 3.2 kernel and was caused by commit 421aa841a134f6a743111cf44d0c6d3b45e3cf8c "usb/xhci: hide MSI code behind PCI bars", but wasn't noticed until 3.13 when a configuration with these options was tried Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06xhci: extend quirk for Renesas cardsIgor Gnatenko
commit 6db249ebefc6bf5c39f35dfaacc046d8ad3ffd70 upstream. After suspend another Renesas PCI-X USB 3.0 card doesn't work. [root@fedora-20 ~]# lspci -vmnnd 1912: Device: 03:00.0 Class: USB controller [0c03] Vendor: Renesas Technology Corp. [1912] Device: uPD720202 USB 3.0 Host Controller [0015] SVendor: Renesas Technology Corp. [1912] SDevice: uPD720202 USB 3.0 Host Controller [0015] Rev: 02 ProgIf: 30 This patch should be applied to stable kernel 3.14 that contain the commit 1aa9578c1a9450fb21501c4f549f5b1edb557e6d "xhci: Fix resume issues on Renesas chips in Samsung laptops" Reported-and-tested-by: Anatoly Kharchenko <rfr-bugs@yandex.ru> Reference: http://redmine.russianfedora.pro/issues/1315 Signed-off-by: Igor Gnatenko <i.gnatenko.brain@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06usb: musb: set TXMAXP and AUTOSET for full speed bulk in device modesupriya karanth
commit bb3a2ef2eb8cfaea335dcb3426350df7f3d48069 upstream. The TXMAXP register is not set correctly for full speed bulk case when the can_bulk_split() is used. Without this PIO transfers will not take place correctly The "mult" factor needs to be updated correctly for the can_bulk_split() case The AUTOSET bit in the TXCSR is not being set if the "mult" factor is greater than 0 for the High Bandwidth ISO case. But the "mult" factor is also greater than 0 in case of Full speed bulk transfers with the packet splitting in TXMAXP register Without the AUTOSET the DMA transfers will not progress in mode1 [ balbi@ti.com : add braces to both branches ] Signed-off-by: supriya karanth <supriya.karanth@stericsson.com> Signed-off-by: Praveena NADAHALLY <praveen.nadahally@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com> Cc: ian coolidge <iancoolidge@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06reiserfs: fix race in readdirJeff Mahoney
commit 01d8885785a60ae8f4c37b0ed75bdc96d0fc6a44 upstream. jdm-20004 reiserfs_delete_xattrs: Couldn't delete all xattrs (-2) The -ENOENT is due to readdir calling dir_emit on the same entry twice. If the dir_emit callback sleeps and the tree is changed underneath us, we won't be able to trust deh_offset(deh) anymore. We need to save next_pos before we might sleep so we can find the next entry. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06target/tcm_fc: Fix use-after-free of ft_tpgAndy Grover
commit 2c42be2dd4f6586728dba5c4e197afd5cfaded78 upstream. ft_del_tpg checks tpg->tport is set before unlinking the tpg from the tport when the tpg is being removed. Set this pointer in ft_tport_create, or the unlinking won't happen in ft_del_tpg and tport->tpg will reference a deleted object. This patch sets tpg->tport in ft_tport_create, because that's what ft_del_tpg checks, and is the only way to get back to the tport to clear tport->tpg. The bug was occuring when: - lport created, tport (our per-lport, per-provider context) is allocated. tport->tpg = NULL - tpg created - a PRLI is received. ft_tport_create is called, tpg is found and tport->tpg is set - tpg removed. ft_tpg is freed in ft_del_tpg. Since tpg->tport was not set, tport->tpg is not cleared and points at freed memory - Future calls to ft_tport_create return tport via first conditional, instead of searching for new tpg by calling ft_lport_find_tpg. tport->tpg is still invalid, and will access freed memory. see https://bugzilla.redhat.com/show_bug.cgi?id=1071340 Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06iscsi-target: Fix ERL=2 ASYNC_EVENT connection pointer bugNicholas Bellinger
commit d444edc679e7713412f243b792b1f964e5cff1e1 upstream. This patch fixes a long-standing bug in iscsit_build_conn_drop_async_message() where during ERL=2 connection recovery, a bogus conn_p pointer could end up being used to send the ISCSI_OP_ASYNC_EVENT + DROPPING_CONNECTION notifying the initiator that cmd->logout_cid has failed. The bug was manifesting itself as an OOPs in iscsit_allocate_cmd() with a bogus conn_p pointer in iscsit_build_conn_drop_async_message(). Reported-by: Arshad Hussain <arshad.hussain@calsoftinc.com> Reported-by: santosh kulkarni <santosh.kulkarni@calsoftinc.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06SCSI: arcmsr: upper 32 of dma address lostDan Carpenter
commit e2c70425f05219b142b3a8a9489a622c736db39d upstream. The original code always set the upper 32 bits to zero because it was doing a shift of the wrong variable. Fixes: 1a4f550a09f8 ('[SCSI] arcmsr: 1.20.00.15: add SATA RAID plus other fixes') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06ib_srpt: Use correct ib_sg_dma primitivesMike Marciniszyn
commit b076808051f2c80d38e03fb2f1294f525c7a446d upstream. The code was incorrectly using sg_dma_address() and sg_dma_len() instead of ib_sg_dma_address() and ib_sg_dma_len(). This prevents srpt from functioning with the Intel HCA and indeed will corrupt memory badly. Cc: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Tested-by: Vinod Kumar <vinod.kumar@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06IB/ehca: Returns an error on ib_copy_to_udata() failureYann Droneaud
commit 5bdb0f02add5994b0bc17494f4726925ca5d6ba1 upstream. In case of error when writing to userspace, function ehca_create_cq() does not set an error code before following its error path. This patch sets the error code to -EFAULT when ib_copy_to_udata() fails. This was caught when using spatch (aka. coccinelle) to rewrite call to ib_copy_{from,to}_udata(). Link: https://www.gitorious.org/opteya/coccib/source/75ebf2c1033c64c1d81df13e4ae44ee99c989eba:ib_copy_udata.cocci Link: http://marc.info/?i=cover.1394485254.git.ydroneaud@opteya.com Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06IB/mthca: Return an error on ib_copy_to_udata() failureYann Droneaud
commit 08e74c4b00c30c232d535ff368554959403d0432 upstream. In case of error when writing to userspace, the function mthca_create_cq() does not set an error code before following its error path. This patch sets the error code to -EFAULT when ib_copy_to_udata() fails. This was caught when using spatch (aka. coccinelle) to rewrite call to ib_copy_{from,to}_udata(). Link: https://www.gitorious.org/opteya/coccib/source/75ebf2c1033c64c1d81df13e4ae44ee99c989eba:ib_copy_udata.cocci Link: http://marc.info/?i=cover.1394485254.git.ydroneaud@opteya.com Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06IB/nes: Return an error on ib_copy_from_udata() failure instead of NULLYann Droneaud
commit 9d194d1025f463392feafa26ff8c2d8247f71be1 upstream. In case of error while accessing to userspace memory, function nes_create_qp() returns NULL instead of an error code wrapped through ERR_PTR(). But NULL is not expected by ib_uverbs_create_qp(), as it check for error with IS_ERR(). As page 0 is likely not mapped, it is going to trigger an Oops when the kernel will try to dereference NULL pointer to access to struct ib_qp's fields. In some rare cases, page 0 could be mapped by userspace, which could turn this bug to a vulnerability that could be exploited: the function pointers in struct ib_device will be under userspace total control. This was caught when using spatch (aka. coccinelle) to rewrite calls to ib_copy_{from,to}_udata(). Link: https://www.gitorious.org/opteya/ib-hw-nes-create-qp-null Link: https://www.gitorious.org/opteya/coccib/source/75ebf2c1033c64c1d81df13e4ae44ee99c989eba:ib_copy_udata.cocci Link: http://marc.info/?i=cover.1394485254.git.ydroneaud@opteya.com Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06IB/ipath: Fix potential buffer overrun in sending diag packet routineDennis Dalessandro
commit a2cb0eb8a64adb29a99fd864013de957028f36ae upstream. Guard against a potential buffer overrun. The size to read from the user is passed in, and due to the padding that needs to be taken into account, as well as the place holder for the ICRC it is possible to overflow the 32bit value which would cause more data to be copied from user space than is allocated in the buffer. Reported-by: Nico Golde <nico@ngolde.de> Reported-by: Fabian Yamaguchi <fabs@goesec.de> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06nfsd4: fix setclientid encode sizeJ. Bruce Fields
commit 480efaee085235bb848f1063f959bf144103c342 upstream. Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06nfsd: notify_change needs elevated write countJ. Bruce Fields
commit 9f67f189939eccaa54f3d2c9cf10788abaf2d584 upstream. Looks like this bug has been here since these write counts were introduced, not sure why it was just noticed now. Thanks also to Jan Kara for pointing out the problem. Reported-by: Matthew Rahtz <mrahtz@rapitasystems.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06nfsd4: fix test_stateid error reply encodingJ. Bruce Fields
commit a11fcce1544df08c723d950ff0edef3adac40405 upstream. If the entire operation fails then there's nothing to encode. Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06nfsd4: buffer-length check for SUPPATTR_EXCLCREATJ. Bruce Fields
commit de3997a7eeb9ea286b15879fdf8a95aae065b4f7 upstream. This was an omission from 8c18f2052e756e7d5dea712fc6e7ed70c00e8a39 "nfsd41: SUPPATTR_EXCLCREAT attribute". Cc: Benny Halevy <bhalevy@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06nfsd4: session needs room for following op to error outJ. Bruce Fields
commit 4c69d5855a16f7378648c5733632628fa10431db upstream. Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06USB: fix crash during hotplug of PCI USB controller cardAlan Stern
commit a2ff864b53eac9a0e9b05bfe9d1781ccd6c2af71 upstream. The code in hcd-pci.c that matches up EHCI controllers with their companion UHCI or OHCI controllers assumes that the private drvdata fields don't get set too early. However, it turns out that this field gets set by usb_create_hcd(), before hcd-pci expects it, and this can result in a crash when two controllers are probed in parallel (as can happen when a new controller card is hotplugged). The companions_rwsem lock was supposed to prevent this sort of thing, but usb_create_hcd() is called outside the scope of the rwsem. A simple solution is to check that the root-hub pointer has been initialized as well as the drvdata field. This doesn't happen until usb_add_hcd() is called; that call and the check are both protected by the rwsem. This patch should be applied to stable kernels from 3.10 onward. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Stefani Seibold <stefani@seibold.net> Tested-by: Stefani Seibold <stefani@seibold.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernelsH. Peter Anvin
commit b3b42ac2cbae1f3cecbb6229964a4d48af31d382 upstream. The IRET instruction, when returning to a 16-bit segment, only restores the bottom 16 bits of the user space stack pointer. We have a software workaround for that ("espfix") for the 32-bit kernel, but it relies on a nonzero stack segment base which is not available in 32-bit mode. Since 16-bit support is somewhat crippled anyway on a 64-bit kernel (no V86 mode), and most (if not quite all) 64-bit processors support virtualization for the users who really need it, simply reject attempts at creating a 16-bit segment when running on top of a 64-bit kernel. Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/n/tip-kicdm89kzw9lldryb1br9od0@git.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06staging: r8712u: Fix case where ethtype was never obtained and always be ↵Larry Finger
checked against 0 commit f764cd68d9036498f08fe8834deb6a367b5c2542 upstream. Zero-initializing ether_type masked that the ether type would never be obtained for 8021x packets and the comparison against eapol_type would always fail. Reported-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06staging:serqt_usb2: Fix sparse warning restricted __le16 degrades to integerHimangi Saraogi
commit abe5d64d1a74195a44cd14624f8178b9f48b7cc7 upstream. This patch fixes the following sparse warning : drivers/staging/serqt_usb2/serqt_usb2.c:727:40: warning: restricted __le16 degrades to integer Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06w1: fix w1_send_slave dropping a slave idDavid Fries
commit 6b355b33a64fd6d8ead2b838ec16fb9b551f71e8 upstream. Previous logic, if (avail > 8) { store slave; return; } send data; clear; The logic error is, if there isn't space send the buffer and clear, but the slave wasn't added to the now empty buffer loosing that slave id. It also should have been "if (avail >= 8)" because when it is 8, there is space. Instead, if there isn't space send and clear the buffer, then there is always space for the slave id. Signed-off-by: David Fries <David@Fries.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06mfd: max8997: Fix possible NULL pointer dereference on i2c_new_dummy errorKrzysztof Kozlowski
commit 97dc4ed3fa377ec91bb60ba98b70d645c2099384 upstream. During probe the driver allocates dummy I2C devices for RTC, haptic and MUIC with i2c_new_dummy() but it does not check the return value of this calls. In case of error (i2c_new_device(): memory allocation failure or I2C address cannot be used) this function returns NULL which is later used by i2c_unregister_device(). If i2c_new_dummy() fails for RTC, haptic or MUIC devices, fail also the probe for main MFD driver. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06mfd: max8998: Fix possible NULL pointer dereference on i2c_new_dummy errorKrzysztof Kozlowski
commit ed26f87b9f71693a1d1ee85f5e6209601505080f upstream. During probe the driver allocates dummy I2C device for RTC with i2c_new_dummy() but it does not check the return value of this call. In case of error (i2c_new_device(): memory allocation failure or I2C address cannot be used) this function returns NULL which is later used by i2c_unregister_device(). If i2c_new_dummy() fails for RTC device, fail also the probe for main MFD driver. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06mfd: max8925: Fix possible NULL pointer dereference on i2c_new_dummy errorKrzysztof Kozlowski
commit 96cf3dedc491d2f1f66cc26217f2b06b0c7b6797 upstream. During probe the driver allocates dummy I2C devices for RTC and ADC with i2c_new_dummy() but it does not check the return value of this calls. In case of error (i2c_new_device(): memory allocation failure or I2C address cannot be used) this function returns NULL which is later used by i2c_unregister_device(). If i2c_new_dummy() fails for RTC or ADC devices, fail also the probe for main MFD driver. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06ALSA: ice1712: Fix boundary checks in PCM pointer opsTakashi Iwai
commit 4f8e940095536bc002a81666a4107a581c84e9b9 upstream. PCM pointer callbacks in ice1712 driver check the buffer size boundary wrongly between bytes and frames. This leads to PCM core warnings like: snd_pcm_update_hw_ptr0: 105 callbacks suppressed ALSA pcm_lib.c:352 BUG: pcmC3D0c:0, pos = 5461, buffer size = 5461, period size = 2730 This patch fixes these checks to be placed after the proper unit conversions. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06ALSA: hda - Enable beep for ASUS 1015EW. Trevor King
commit a4b7f21d7b42b33609df3f86992a8deff80abfaf upstream. The `lspci -nnvv` output contains (wrapped for line length): 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:115d] Signed-off-by: W. Trevor King <wking@tremily.us> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06ARM: 8030/1: ARM : kdump : add arch_crash_save_vmcoreinfoLiu Hua
commit 56b700fd6f1e49149880fb1b6ffee0dca5be45fb upstream. For vmcore generated by LPAE enabled kernel, user space utility such as crash needs additional infomation to parse. So this patch add arch_crash_save_vmcoreinfo as what PAE enabled i386 linux does. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Liu Hua <sdu.liu@huawei.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06ARM: 8027/1: fix do_div() bug in big-endian systemsXiangyu Lu
commit 80bb3ef109ff40a7593d9481c17de9bbc4d7c0e2 upstream. In big-endian systems, "%1" get the most significant part of the value, cause the instruction to get the wrong result. When viewing ftrace record in big-endian ARM systems, we found that the timestamp errors: swapper-0 [001] 1325.970000: 0:120:R ==> [001] 16:120:R events/1 events/1-16 [001] 1325.970000: 16:120:S ==> [001] 0:120:R swapper swapper-0 [000] 1325.1000000: 0:120:R + [000] 15:120:R events/0 swapper-0 [000] 1325.1000000: 0:120:R ==> [000] 15:120:R events/0 swapper-0 [000] 1326.030000: 0:120:R + [000] 1150:120:R sshd swapper-0 [000] 1326.030000: 0:120:R ==> [000] 1150:120:R sshd When viewed ftrace records, it will call the do_div(n, base) function, which achieved arch/arm/include/asm/div64.h in. When n = 10000000, base = 1000000, in do_div(n, base) will execute "umull %Q0, %R0, %1, %Q2". Reviewed-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Alex Wu <wuquanming@huawei.com> Signed-off-by: Xiangyu Lu <luxiangyu@huawei.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06ARM: OMAP3: hwmod data: Correct clock domains for USB modulesRoger Quadros
commit c6c56697ae4bf1226263c19e8353343d7083f40e upstream. OMAP3 doesn't contain "l3_init_clkdm" clock domain. Use the proper clock domains for USB Host and USB TLL modules. Gets rid of the following warnings during boot omap_hwmod: usb_host_hs: could not associate to clkdm l3_init_clkdm omap_hwmod: usb_tll_hs: could not associate to clkdm l3_init_clkdm Reported-by: Nishanth Menon <nm@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Fixes: de231388cb80a8ef3e779bbfa0564ba0157b7377 ("ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP3") Cc: Keshava Munegowda <keshava_mgowda@ti.com> Cc: Partha Basak <parthab@india.ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06ARM: OMAP2+: INTC: Acknowledge stuck active interruptsStefan Sørensen
commit 698b48532539484b012fb7c4176b959d32a17d00 upstream. When an interrupt has become active on the INTC it will stay active until it is acked, even if masked or de-asserted. The INTC_PENDING_IRQn registers are however updated and since these are used by omap_intc_handle_irq to determine which interrupt to handle, it will never see the active interrupt. This will result in a storm of useless interrupts that is only stopped when another higher priority interrupt is asserted. Fix by sending the INTC an acknowledge if we find no interrupts to handle. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06ASoC: cs42l73: Fix mask bits for SOC_VALUE_ENUM_SINGLEBrian Austin
commit 1555b652970e541fa1cb80c61ffc696bbfb92bb7 upstream. The mask bits values were wrong for the SOC_VALUE_ENUM_SINGLE for the mono mix controls. Reported-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-26Linux 3.4.88v3.4.88Greg Kroah-Hartman
2014-04-26wait: fix reparent_leader() vs EXIT_DEAD->EXIT_ZOMBIE raceOleg Nesterov
commit dfccbb5e49a621c1b21a62527d61fc4305617aca upstream. wait_task_zombie() first does EXIT_ZOMBIE->EXIT_DEAD transition and drops tasklist_lock. If this task is not the natural child and it is traced, we change its state back to EXIT_ZOMBIE for ->real_parent. The last transition is racy, this is even documented in 50b8d257486a "ptrace: partially fix the do_wait(WEXITED) vs EXIT_DEAD->EXIT_ZOMBIE race". wait_consider_task() tries to detect this transition and clear ->notask_error but we can't rely on ptrace_reparented(), debugger can exit and do ptrace_unlink() before its sub-thread sets EXIT_ZOMBIE. And there is another problem which were missed before: this transition can also race with reparent_leader() which doesn't reset >exit_signal if EXIT_DEAD, assuming that this task must be reaped by someone else. So the tracee can be re-parented with ->exit_signal != SIGCHLD, and if /sbin/init doesn't use __WALL it becomes unreapable. Change reparent_leader() to update ->exit_signal even if EXIT_DEAD. Note: this is the simple temporary hack for -stable, it doesn't try to solve all problems, it will be reverted by the next changes. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Jan Kratochvil <jan.kratochvil@redhat.com> Reported-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Michal Schmidt <mschmidt@redhat.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Lennart Poettering <lpoetter@redhat.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-26jffs2: remove from wait queue after schedule()Li Zefan
commit 3ead9578443b66ddb3d50ed4f53af8a0c0298ec5 upstream. @wait is a local variable, so if we don't remove it from the wait queue list, later wake_up() may end up accessing invalid memory. This was spotted by eyes. Signed-off-by: Li Zefan <lizefan@huawei.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-26jffs2: avoid soft-lockup in jffs2_reserve_space_gc()Li Zefan
commit 13b546d96207c131eeae15dc7b26c6e7d0f1cad7 upstream. We triggered soft-lockup under stress test on 2.6.34 kernel. BUG: soft lockup - CPU#1 stuck for 60009ms! [lockf2.test:14488] ... [<bf09a4d4>] (jffs2_do_reserve_space+0x420/0x440 [jffs2]) [<bf09a528>] (jffs2_reserve_space_gc+0x34/0x78 [jffs2]) [<bf0a1350>] (jffs2_garbage_collect_dnode.isra.3+0x264/0x478 [jffs2]) [<bf0a2078>] (jffs2_garbage_collect_pass+0x9c0/0xe4c [jffs2]) [<bf09a670>] (jffs2_reserve_space+0x104/0x2a8 [jffs2]) [<bf09dc48>] (jffs2_write_inode_range+0x5c/0x4d4 [jffs2]) [<bf097d8c>] (jffs2_write_end+0x198/0x2c0 [jffs2]) [<c00e00a4>] (generic_file_buffered_write+0x158/0x200) [<c00e14f4>] (__generic_file_aio_write+0x3a4/0x414) [<c00e15c0>] (generic_file_aio_write+0x5c/0xbc) [<c012334c>] (do_sync_write+0x98/0xd4) [<c0123a84>] (vfs_write+0xa8/0x150) [<c0123d74>] (sys_write+0x3c/0xc0)] Fix this by adding a cond_resched() in the while loop. [akpm@linux-foundation.org: don't initialize `ret'] Signed-off-by: Li Zefan <lizefan@huawei.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-26jffs2: Fix crash due to truncation of csizeAjesh Kunhipurayil Vijayan
commit 41bf1a24c1001f4d0d41a78e1ac575d2f14789d7 upstream. mounting JFFS2 partition sometimes crashes with this call trace: [ 1322.240000] Kernel bug detected[#1]: [ 1322.244000] Cpu 2 [ 1322.244000] $ 0 : 0000000000000000 0000000000000018 000000003ff00070 0000000000000001 [ 1322.252000] $ 4 : 0000000000000000 c0000000f3980150 0000000000000000 0000000000010000 [ 1322.260000] $ 8 : ffffffffc09cd5f8 0000000000000001 0000000000000088 c0000000ed300de8 [ 1322.268000] $12 : e5e19d9c5f613a45 ffffffffc046d464 0000000000000000 66227ba5ea67b74e [ 1322.276000] $16 : c0000000f1769c00 c0000000ed1e0200 c0000000f3980150 0000000000000000 [ 1322.284000] $20 : c0000000f3a80000 00000000fffffffc c0000000ed2cfbd8 c0000000f39818f0 [ 1322.292000] $24 : 0000000000000004 0000000000000000 [ 1322.300000] $28 : c0000000ed2c0000 c0000000ed2cfab8 0000000000010000 ffffffffc039c0b0 [ 1322.308000] Hi : 000000000000023c [ 1322.312000] Lo : 000000000003f802 [ 1322.316000] epc : ffffffffc039a9f8 check_tn_node+0x88/0x3b0 [ 1322.320000] Not tainted [ 1322.324000] ra : ffffffffc039c0b0 jffs2_do_read_inode_internal+0x1250/0x1e48 [ 1322.332000] Status: 5400f8e3 KX SX UX KERNEL EXL IE [ 1322.336000] Cause : 00800034 [ 1322.340000] PrId : 000c1004 (Netlogic XLP) [ 1322.344000] Modules linked in: [ 1322.348000] Process jffs2_gcd_mtd7 (pid: 264, threadinfo=c0000000ed2c0000, task=c0000000f0e68dd8, tls=0000000000000000) [ 1322.356000] Stack : c0000000f1769e30 c0000000ed010780 c0000000ed010780 c0000000ed300000 c0000000f1769c00 c0000000f3980150 c0000000f3a80000 00000000fffffffc c0000000ed2cfbd8 ffffffffc039c0b0 ffffffffc09c6340 0000000000001000 0000000000000dec ffffffffc016c9d8 c0000000f39805a0 c0000000f3980180 0000008600000000 0000000000000000 0000000000000000 0000000000000000 0001000000000dec c0000000f1769d98 c0000000ed2cfb18 0000000000010000 0000000000010000 0000000000000044 c0000000f3a80000 c0000000f1769c00 c0000000f3d207a8 c0000000f1769d98 c0000000f1769de0 ffffffffc076f9c0 0000000000000009 0000000000000000 0000000000000000 ffffffffc039cf90 0000000000000017 ffffffffc013fbdc 0000000000000001 000000010003e61c ... [ 1322.424000] Call Trace: [ 1322.428000] [<ffffffffc039a9f8>] check_tn_node+0x88/0x3b0 [ 1322.432000] [<ffffffffc039c0b0>] jffs2_do_read_inode_internal+0x1250/0x1e48 [ 1322.440000] [<ffffffffc039cf90>] jffs2_do_crccheck_inode+0x70/0xd0 [ 1322.448000] [<ffffffffc03a1b80>] jffs2_garbage_collect_pass+0x160/0x870 [ 1322.452000] [<ffffffffc03a392c>] jffs2_garbage_collect_thread+0xdc/0x1f0 [ 1322.460000] [<ffffffffc01541c8>] kthread+0xb8/0xc0 [ 1322.464000] [<ffffffffc0106d18>] kernel_thread_helper+0x10/0x18 [ 1322.472000] [ 1322.472000] Code: 67bd0050 94a4002c 2c830001 <00038036> de050218 2403fffc 0080a82d 00431824 24630044 [ 1322.480000] ---[ end trace b052bb90e97dfbf5 ]--- The variable csize in structure jffs2_tmp_dnode_info is of type uint16_t, but it is used to hold the compressed data length(csize) which is declared as uint32_t. So, when the value of csize exceeds 16bits, it gets truncated when assigned to tn->csize. This is causing a kernel BUG. Changing the definition of csize in jffs2_tmp_dnode_info to uint32_t fixes the issue. Signed-off-by: Ajesh Kunhipurayil Vijayan <ajesh@broadcom.com> Signed-off-by: Kamlakant Patel <kamlakant.patel@broadcom.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-26jffs2: Fix segmentation fault found in stress testKamlakant Patel
commit 3367da5610c50e6b83f86d366d72b41b350b06a2 upstream. Creating a large file on a JFFS2 partition sometimes crashes with this call trace: [ 306.476000] CPU 13 Unable to handle kernel paging request at virtual address c0000000dfff8002, epc == ffffffffc03a80a8, ra == ffffffffc03a8044 [ 306.488000] Oops[#1]: [ 306.488000] Cpu 13 [ 306.492000] $ 0 : 0000000000000000 0000000000000000 0000000000008008 0000000000008007 [ 306.500000] $ 4 : c0000000dfff8002 000000000000009f c0000000e0007cde c0000000ee95fa58 [ 306.508000] $ 8 : 0000000000000001 0000000000008008 0000000000010000 ffffffffffff8002 [ 306.516000] $12 : 0000000000007fa9 000000000000ff0e 000000000000ff0f 80e55930aebb92bb [ 306.524000] $16 : c0000000e0000000 c0000000ee95fa5c c0000000efc80000 ffffffffc09edd70 [ 306.532000] $20 : ffffffffc2b60000 c0000000ee95fa58 0000000000000000 c0000000efc80000 [ 306.540000] $24 : 0000000000000000 0000000000000004 [ 306.548000] $28 : c0000000ee950000 c0000000ee95f738 0000000000000000 ffffffffc03a8044 [ 306.556000] Hi : 00000000000574a5 [ 306.560000] Lo : 6193b7a7e903d8c9 [ 306.564000] epc : ffffffffc03a80a8 jffs2_rtime_compress+0x98/0x198 [ 306.568000] Tainted: G W [ 306.572000] ra : ffffffffc03a8044 jffs2_rtime_compress+0x34/0x198 [ 306.580000] Status: 5000f8e3 KX SX UX KERNEL EXL IE [ 306.584000] Cause : 00800008 [ 306.588000] BadVA : c0000000dfff8002 [ 306.592000] PrId : 000c1100 (Netlogic XLP) [ 306.596000] Modules linked in: [ 306.596000] Process dd (pid: 170, threadinfo=c0000000ee950000, task=c0000000ee6e0858, tls=0000000000c47490) [ 306.608000] Stack : 7c547f377ddc7ee4 7ffc7f967f5d7fae 7f617f507fc37ff4 7e7d7f817f487f5f 7d8e7fec7ee87eb3 7e977ff27eec7f9e 7d677ec67f917f67 7f3d7e457f017ed7 7fd37f517f867eb2 7fed7fd17ca57e1d 7e5f7fe87f257f77 7fd77f0d7ede7fdb 7fba7fef7e197f99 7fde7fe07ee37eb5 7f5c7f8c7fc67f65 7f457fb87f847e93 7f737f3e7d137cd9 7f8e7e9c7fc47d25 7dbb7fac7fb67e52 7ff17f627da97f64 7f6b7df77ffa7ec5 80057ef17f357fb3 7f767fa27dfc7fd5 7fe37e8e7fd07e53 7e227fcf7efb7fa1 7f547e787fa87fcc 7fcb7fc57f5a7ffb 7fc07f6c7ea97e80 7e2d7ed17e587ee0 7fb17f9d7feb7f31 7f607e797e887faa 7f757fdd7c607ff3 7e877e657ef37fbd 7ec17fd67fe67ff7 7ff67f797ff87dc4 7eef7f3a7c337fa6 7fe57fc97ed87f4b 7ebe7f097f0b8003 7fe97e2a7d997cba 7f587f987f3c7fa9 ... [ 306.676000] Call Trace: [ 306.680000] [<ffffffffc03a80a8>] jffs2_rtime_compress+0x98/0x198 [ 306.684000] [<ffffffffc0394f10>] jffs2_selected_compress+0x110/0x230 [ 306.692000] [<ffffffffc039508c>] jffs2_compress+0x5c/0x388 [ 306.696000] [<ffffffffc039dc58>] jffs2_write_inode_range+0xd8/0x388 [ 306.704000] [<ffffffffc03971bc>] jffs2_write_end+0x16c/0x2d0 [ 306.708000] [<ffffffffc01d3d90>] generic_file_buffered_write+0xf8/0x2b8 [ 306.716000] [<ffffffffc01d4e7c>] __generic_file_aio_write+0x1ac/0x350 [ 306.720000] [<ffffffffc01d50a0>] generic_file_aio_write+0x80/0x168 [ 306.728000] [<ffffffffc021f7dc>] do_sync_write+0x94/0xf8 [ 306.732000] [<ffffffffc021ff6c>] vfs_write+0xa4/0x1a0 [ 306.736000] [<ffffffffc02202e8>] SyS_write+0x50/0x90 [ 306.744000] [<ffffffffc0116cc0>] handle_sys+0x180/0x1a0 [ 306.748000] [ 306.748000] Code: 020b202d 0205282d 90a50000 <90840000> 14a40038 00000000 0060602d 0000282d 016c5823 [ 306.760000] ---[ end trace 79dd088435be02d0 ]--- Segmentation fault This crash is caused because the 'positions' is declared as an array of signed short. The value of position is in the range 0..65535, and will be converted to a negative number when the position is greater than 32767 and causes a corruption and crash. Changing the definition to 'unsigned short' fixes this issue Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: Kamlakant Patel <kamlakant.patel@broadcom.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-26Bluetooth: Fix removing Long Term KeyClaudio Takahasi
commit 5981a8821b774ada0be512fd9bad7c241e17657e upstream. This patch fixes authentication failure on LE link re-connection when BlueZ acts as slave (peripheral). LTK is removed from the internal list after its first use causing PIN or Key missing reply when re-connecting the link. The LE Long Term Key Request event indicates that the master is attempting to encrypt or re-encrypt the link. Pre-condition: BlueZ host paired and running as slave. How to reproduce(master): 1) Establish an ACL LE encrypted link 2) Disconnect the link 3) Try to re-establish the ACL LE encrypted link (fails) > HCI Event: LE Meta Event (0x3e) plen 19 LE Connection Complete (0x01) Status: Success (0x00) Handle: 64 Role: Slave (0x01) ... @ Device Connected: 00:02:72:DC:29:C9 (1) flags 0x0000 > HCI Event: LE Meta Event (0x3e) plen 13 LE Long Term Key Request (0x05) Handle: 64 Random number: 875be18439d9aa37 Encryption diversifier: 0x76ed < HCI Command: LE Long Term Key Request Reply (0x08|0x001a) plen 18 Handle: 64 Long term key: 2aa531db2fce9f00a0569c7d23d17409 > HCI Event: Command Complete (0x0e) plen 6 LE Long Term Key Request Reply (0x08|0x001a) ncmd 1 Status: Success (0x00) Handle: 64 > HCI Event: Encryption Change (0x08) plen 4 Status: Success (0x00) Handle: 64 Encryption: Enabled with AES-CCM (0x01) ... @ Device Disconnected: 00:02:72:DC:29:C9 (1) reason 3 < HCI Command: LE Set Advertise Enable (0x08|0x000a) plen 1 Advertising: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 LE Set Advertise Enable (0x08|0x000a) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 LE Connection Complete (0x01) Status: Success (0x00) Handle: 64 Role: Slave (0x01) ... @ Device Connected: 00:02:72:DC:29:C9 (1) flags 0x0000 > HCI Event: LE Meta Event (0x3e) plen 13 LE Long Term Key Request (0x05) Handle: 64 Random number: 875be18439d9aa37 Encryption diversifier: 0x76ed < HCI Command: LE Long Term Key Request Neg Reply (0x08|0x001b) plen 2 Handle: 64 > HCI Event: Command Complete (0x0e) plen 6 LE Long Term Key Request Neg Reply (0x08|0x001b) ncmd 1 Status: Success (0x00) Handle: 64 > HCI Event: Disconnect Complete (0x05) plen 4 Status: Success (0x00) Handle: 64 Reason: Authentication Failure (0x05) @ Device Disconnected: 00:02:72:DC:29:C9 (1) reason 0 Signed-off-by: Claudio Takahasi <claudio.takahasi@openbossa.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-26Char: ipmi_bt_sm, fix infinite loopJiri Slaby
commit a94cdd1f4d30f12904ab528152731fb13a812a16 upstream. In read_all_bytes, we do unsigned char i; ... bt->read_data[0] = BMC2HOST; bt->read_count = bt->read_data[0]; ... for (i = 1; i <= bt->read_count; i++) bt->read_data[i] = BMC2HOST; If bt->read_data[0] == bt->read_count == 255, we loop infinitely in the 'for' loop. Make 'i' an 'int' instead of 'char' to get rid of the overflow and finish the loop after 255 iterations every time. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reported-and-debugged-by: Rui Hui Dian <rhdian@novell.com> Cc: Tomas Cech <tcech@suse.cz> Cc: Corey Minyard <minyard@acm.org> Cc: <openipmi-developer@lists.sourceforge.net> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-26sparc64: don't treat 64-bit syscall return codes as 32-bitDave Kleikamp
[ Upstream commit 1535bd8adbdedd60a0ee62e28fd5225d66434371 ] When checking a system call return code for an error, linux_sparc_syscall was sign-extending the lower 32-bit value and comparing it to -ERESTART_RESTARTBLOCK. lseek can return valid return codes whose lower 32-bits alone would indicate a failure (such as 4G-1). Use the whole 64-bit value to check for errors. Only the 32-bit path should sign extend the lower 32-bit value. Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Acked-by: Bob Picco <bob.picco@oracle.com> Acked-by: Allen Pais <allen.pais@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-15 07:36:29 +0000