summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-12-20Linux 4.4-rc6v4.4-rc6Linus Torvalds
2015-12-20Merge tag 'rtc-4.4-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC fixes from Alexandre Belloni: "Late fixes for the RTC subsystem for 4.4: A fix for a nasty hardware bug in rk808 and an initialization reordering in da9063 to fix a possible crash" * tag 'rtc-4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: da9063: fix access ordering error during RTC interrupt at system power on rtc: rk808: Compensate for Rockchip calendar deviation on November 31st
2015-12-20rtc: da9063: fix access ordering error during RTC interrupt at system power onSteve Twiss
This fix alters the ordering of the IRQ and device registrations in the RTC driver probe function. This change will apply to the RTC driver that supports both DA9063 and DA9062 PMICs. A problem could occur with the existing RTC driver if: A system is started from a cold boot using the PMIC RTC IRQ to initiate a power on operation. For instance, if an RTC alarm is used to start a platform from power off. The existing driver IRQ is requested before the device has been properly registered. i.e. ret = devm_request_threaded_irq() comes before rtc->rtc_dev = devm_rtc_device_register(); In this case, the interrupt can be called before the device has been registered and the handler can be called immediately. The IRQ handler da9063_alarm_event() contains the function call rtc_update_irq(rtc->rtc_dev, 1, RTC_IRQF | RTC_AF); which in turn tries to access the unavailable rtc->rtc_dev. The fix is to reorder the functions inside the RTC probe. The IRQ is requested after the RTC device resource has been registered so that get_irq_byname is the last thing to happen. Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-12-20rtc: rk808: Compensate for Rockchip calendar deviation on November 31stJulius Werner
In A.D. 1582 Pope Gregory XIII found that the existing Julian calendar insufficiently represented reality, and changed the rules about calculating leap years to account for this. Similarly, in A.D. 2013 Rockchip hardware engineers found that the new Gregorian calendar still contained flaws, and that the month of November should be counted up to 31 days instead. Unfortunately it takes a long time for calendar changes to gain widespread adoption, and just like more than 300 years went by before the last Protestant nation implemented Greg's proposal, we will have to wait a while until all religions and operating system kernels acknowledge the inherent advantages of the Rockchip system. Until then we need to translate dates read from (and written to) Rockchip hardware back to the Gregorian format. This patch works by defining Jan 1st, 2016 as the arbitrary anchor date on which Rockchip and Gregorian calendars are in sync. From that we can translate arbitrary later dates back and forth by counting the number of November/December transitons since the anchor date to determine the offset between the calendars. We choose this method (rather than trying to regularly "correct" the date stored in hardware) since it's the only way to ensure perfect time-keeping even if the system may be shut down for an unknown number of years. The drawback is that other software reading the same hardware (e.g. mainboard firmware) must use the same translation convention (including the same anchor date) to be able to read and write correct timestamps from/to the RTC. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-12-19Merge tag 'tty-4.4-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some tty/serial driver fixes for 4.4-rc6 that resolve some reported problems. All of these have been in linux-next. The details are in the shortlog" * tag 'tty-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: Fix GPF in flush_to_ldisc() serial: earlycon: Add missing spinlock initialization serial: sh-sci: Fix length of scatterlist n_tty: Fix poll() after buffer-limited eof push read serial: 8250_uniphier: fix dl_read and dl_write functions
2015-12-19Merge tag 'usb-4.4-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some USB and PHY fixes for 4.4-rc6. All of them resolve some reported problems. Full details in the shortlog" * tag 'usb-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: fix invalid memory access in hub_activate() USB: ipaq.c: fix a timeout loop phy: core: Get a refcount to phy in devm_of_phy_get_by_index() phy: cygnus: pcie: add missing of_node_put phy: miphy365x: add missing of_node_put phy: miphy28lp: add missing of_node_put phy: rockchip-usb: add missing of_node_put phy: berlin-sata: add missing of_node_put phy: mt65xx-usb3: add missing of_node_put phy: brcmstb-sata: add missing of_node_put phy: sun9i-usb: add USB dependency
2015-12-19Merge tag 'md/4.4-rc5-fixes' of git://neil.brown.name/mdLinus Torvalds
Pull md fixes from Neil Brown: "Four fixes for md: - two recently introduced regressions fixed. - one older bug in RAID10 - tagged for -stable since 4.2 - one minor sysfs api improvement" * tag 'md/4.4-rc5-fixes' of git://neil.brown.name/md: Fix remove_and_add_spares removes drive added as spare in slot_store md: fix bug due to nested suspend MD: change journal disk role to disk 0 md/raid10: fix data corruption and crash during resync
2015-12-19Merge tag 'powerpc-4.4-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Partial revert of "powerpc: Individual System V IPC system calls" - pr_warn_once on unsupported OPAL_MSG type from Stewart - Fix deadlock in opal-irqchip introduced by "Fix double endian conversion" from Alistair * tag 'powerpc-4.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/opal-irqchip: Fix deadlock introduced by "Fix double endian conversion" powerpc/powernv: pr_warn_once on unsupported OPAL_MSG type Partial revert of "powerpc: Individual System V IPC system calls"
2015-12-19Merge tag 'spi-fix-v4.4-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A couple of reference counting bugs here, one in spidev and one with holding an extra reference in the core that we never freed if we removed a device, plus a driver specific fix. Both of the refcounting bugs are very old but they've only been found by observation so hopefully their impact has been low" * tag 'spi-fix-v4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: fix parent-device reference leak spi: spidev: Hold spi_lock over all defererences of spi in release() spi-fsl-dspi: Fix CTAR Register access
2015-12-19Merge tag 'gpio-v4.4-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Some GPIO fixes for the v4.4 series. Most prominent: I revert the error propagation from the .get() function until we can fix up all the drivers properly for v4.5. - Revert the error number propagation from the .get() vtable entry temporarily, until we make the proper fixes to all drivers. - Fix the clamping behaviour in the generic GPIO driver. - Driver fix for the ath79 driver" * tag 'gpio-v4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: revert get() to non-errorprogating behaviour gpio: generic: clamp values from bgpio_get_set() gpio: ath79: Fix the logic to clear offset bit of AR71XX_GPIO_REG_OE register
2015-12-19Merge tag 'pinctrl-v4.4-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: - Driver fixes for Freescale i.MX7D, Intel, Broadcom 2835 - One MAINTAINERS entry * tag 'pinctrl-v4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: MAINTAINERS: pinctrl: Add maintainers for pinctrl-single pinctrl: bcm2835: Fix initial value for direction_output pinctrl: intel: fix offset calculation issue of register PAD_OWN pinctrl: intel: fix bug of register offset calculation pinctrl: freescale: add ZERO_OFFSET_VALID flag for vf610 pinctrl
2015-12-19Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "A set of 'usual' driver bugfixes for the I2C subsystem" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: rcar: disable runtime PM correctly in slave mode i2c: designware: Keep pm_runtime_enable/_disable calls in sync i2c: designware: fix IO timeout issue for AMD controller i2c: imx: init bus recovery info before adding i2c adapter i2c: do not use 0x in front of %pa i2c: davinci: Increase module clock frequency i2c: mv64xxx: The n clockdiv factor is 0 based on sunxi SoCs i2c: rk3x: populate correct variable for sda_falling_time
2015-12-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Just a few assorted driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elants_i2c - fix wake-on-touch Input: elan_i2c - set input device's vendor and product IDs Input: sun4i-lradc-keys - fix typo in binding documentation Input: atmel_mxt_ts - add maxtouch to I2C table for module autoload Input: arizona-haptic - fix disabling of haptics device Input: aiptek - fix crash on detecting device without endpoints Input: atmel_mxt_ts - add generic platform data for Chromebooks Input: parkbd - clear unused function pointers Input: walkera0701 - clear unused function pointers Input: turbografx - clear unused function pointers Input: gamecon - clear unused function pointers Input: db9 - clear unused function pointers
2015-12-19i2c: rcar: disable runtime PM correctly in slave modeWolfram Sang
When we also are I2C slave, we need to disable runtime PM because the address detection mechanism needs to be active all the time. However, we can reenable runtime PM once the slave instance was unregistered. So, use pm_runtime_get_sync/put to achieve this, since it has proper refcounting. pm_runtime_allow/forbid is like a global knob controllable from userspace which is unsuitable here. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2015-12-18Merge tag 'pm+acpi-4.4-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a potential regression introduced during the 4.3 cycle (generic power domains framework), a nasty bug that has been present forever (power capping RAPL driver), a build issue (Tegra cpufreq driver) and a minor ugliness introduced recently (intel_pstate). Specifics: - Fix a potential regression in the generic power domains framework introduced during the 4.3 development cycle that may lead to spurious failures of system suspend in certain situations (Ulf Hansson). - Fix a problem in the power capping RAPL (Running Average Power Limits) driver that causes it to initialize successfully on some systems where it is not supposed to do that which is due to an incorrect check in an initialization routine (Prarit Bhargava). - Fix a build problem in the cpufreq Tegra driver that depends on the regulator framework, but that dependency is not reflected in Kconfig (Arnd Bergmann). - Fix a recent mistake in the intel_pstate driver where a numeric constant is used directly instead of a symbol defined specifically for the case in question (Prarit Bhargava)" * tag 'pm+acpi-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: powercap / RAPL: fix BIOS lock check cpufreq: intel_pstate: Minor cleanup for FRAC_BITS cpufreq: tegra: add regulator dependency for T124 PM / Domains: Allow runtime PM callbacks to be re-used during system PM
2015-12-18Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three fixes this time, two in SES picked up by KASAN for various types of buffer overrun. The first is a USB array which returns page 8 whatever is asked for and causes us to overrun with incorrect data format assumptions and the second is an invalid iteration of page 10 (the additional information page). The final fix is a reversion of a NULL deref fix which caused suspend/resume not to be called in pairs leading to incorrect device operation (Jens has queued a more proper fix for the problem in block)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: ses: fix additional element traversal bug Revert "SCSI: Fix NULL pointer dereference in runtime PM" ses: Fix problems with simple enclosures
2015-12-18Input: elants_i2c - fix wake-on-touchJames Chen
When sending "SLEEP" command to the controller it ceases scanning completely and is unable to wake the system up from sleep, so if it is configured as a wakeup source we should simply configure interrupt for wakeup and rely on idle logic within the controller to reduce power consumption while it is not used. Signed-off-by: James Chen <james.chen@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-18Merge tag 'media/v4.4-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab. * tag 'media/v4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] airspy: increase USB control message buffer size [media] hackrf: move RF gain ctrl enable behind module parameter [media] hackrf: fix possible null ptr on debug printing [media] Revert "[media] ivtv: avoid going past input/audio array"
2015-12-18Merge branch 'for-linus-4.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "A couple of small fixes" * 'for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: check prepare_uptodate_page() error code earlier Btrfs: check for empty bitmap list in setup_cluster_bitmaps btrfs: fix misleading warning when space cache failed to load Btrfs: fix transaction handle leak in balance Btrfs: fix unprotected list move from unused_bgs to deleted_bgs list
2015-12-18Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "Three patches" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: include/linux/mmdebug.h: should include linux/bug.h mm/zswap: change incorrect strncmp use to strcmp proc: fix -ESRCH error when writing to /proc/$pid/coredump_filter
2015-12-18include/linux/mmdebug.h: should include linux/bug.hJames Morse
mmdebug.h uses BUILD_BUG_ON_INVALID(), assuming someone else included linux/bug.h. Include it ourselves. This saves build-failures such as: arch/arm64/include/asm/pgtable.h: In function 'set_pte_at': arch/arm64/include/asm/pgtable.h:281:3: error: implicit declaration of function 'BUILD_BUG_ON_INVALID' [-Werror=implicit-function-declaration] VM_WARN_ONCE(!pte_young(pte), Fixes: 02602a18c32d7 ("bug: completely remove code generated by disabled VM_BUG_ON()") Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-18mm/zswap: change incorrect strncmp use to strcmpDan Streetman
Change the use of strncmp in zswap_pool_find_get() to strcmp. The use of strncmp is no longer correct, now that zswap_zpool_type is not an array; sizeof() will return the size of a pointer, which isn't the right length to compare. We don't need to use strncmp anyway, because the existing params and the passed in params are all guaranteed to be null terminated, so strcmp should be used. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Reported-by: Weijie Yang <weijie.yang@samsung.com> Cc: Seth Jennings <sjennings@variantweb.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-18proc: fix -ESRCH error when writing to /proc/$pid/coredump_filterColin Ian King
Writing to /proc/$pid/coredump_filter always returns -ESRCH because commit 774636e19ed51 ("proc: convert to kstrto*()/kstrto*_from_user()") removed the setting of ret after the get_proc_task call and incorrectly left it as -ESRCH. Instead, return 0 when successful. Example breakage: echo 0 > /proc/self/coredump_filter bash: echo: write error: No such process Fixes: 774636e19ed51 ("proc: convert to kstrto*()/kstrto*_from_user()") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: <stable@vger.kernel.org> [4.3+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-18Merge tag 'hwmon-for-linus-v4.4-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Select CONFIG_BITREVERSE for sht15 driver to avoid build failure if it is not configured. - Force wait for conversion time for the first valid data in tmp102 driver to avoid reporting erroneous data to the thermal subsystem. * tag 'hwmon-for-linus-v4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (sht15) Select CONFIG_BITREVERSE hwmon: (tmp102) Force wait for conversion time for the first valid data
2015-12-18Merge tag 'iommu-fixes-v4.4-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: "Two similar fixes for the Intel and AMD IOMMU drivers to add proper access checks before calling handle_mm_fault" * tag 'iommu-fixes-v4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Do access checks before calling handle_mm_fault() iommu/amd: Do proper access checking before calling handle_mm_fault()
2015-12-18Merge tag 'for-linus-4.4-rc5-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen bug fixes from David Vrabel: - XSA-155 security fixes to backend drivers. - XSA-157 security fixes to pciback. * tag 'for-linus-4.4-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen-pciback: fix up cleanup path when alloc fails xen/pciback: Don't allow MSI-X ops if PCI_COMMAND_MEMORY is not set. xen/pciback: For XEN_PCI_OP_disable_msi[|x] only disable if device has MSI(X) enabled. xen/pciback: Do not install an IRQ handler for MSI interrupts. xen/pciback: Return error on XEN_PCI_OP_enable_msix when device has MSI or MSI-X enabled xen/pciback: Return error on XEN_PCI_OP_enable_msi when device has MSI or MSI-X enabled xen/pciback: Save xen_pci_op commands before processing it xen-scsiback: safely copy requests xen-blkback: read from indirect descriptors only once xen-blkback: only read request operation from shared ring once xen-netback: use RING_COPY_REQUEST() throughout xen-netback: don't use last request to determine minimum Tx credit xen: Add RING_COPY_REQUEST() xen/x86/pvh: Use HVM's flush_tlb_others op xen: Resume PMU from non-atomic context xen/events/fifo: Consume unprocessed events when a CPU dies
2015-12-18Merge tag 'arc-fixes-for-4.4-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC architecture fixes from Vineet Gupta: "Fixes for: - perf interrupts on SMP: Not enabled (at boot) and disabled (at runtime) - stack unwinder regression (for modules, ignoring dwarf3) - nsim hosed for non default kernel link base builds" * tag 'arc-fixes-for-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: smp: Rename platform hook @init_cpu_smp -> @init_per_cpu ARC: rename smp operation init_irq_cpu() to init_per_cpu() ARC: dw2 unwind: Ignore CIE version !=1 gracefully instead of bailing ARC: dw2 unwind: Reinstante unwinding out of modules ARC: [plat-sim] unbork non default CONFIG_LINUX_LINK_BASE ARC: intc: Document arc_request_percpu_irq() better ARCv2: perf: Ensure perf intr gets enabled on all cores ARC: intc: No need to clear IRQ_NOAUTOEN ARCv2: intc: Fix random perf irq disabling in SMP setup ARC: [axs10x] cap ethernet phy to 100 Mbit/sec
2015-12-18Merge tag 'sound-4.4-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "As usual in rc6, this update contains only a few HD-audio and USB-audio device-specific quirks: yet another Thinkpad noise fixes, Dell headphone mic fixes, and AudioQuest DragonFly fixes" * tag 'sound-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Add a fixup for Thinkpad X1 Carbon 2nd ALSA: hda - Set codec to D3 at reboot/shutdown on Thinkpads ALSA: hda - Apply click noise workaround for Thinkpads generically ALSA: hda - Fix headphone mic input on a few Dell ALC293 machines ALSA: usb-audio: Add sample rate inquiry quirk for AudioQuest DragonFly ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly
2015-12-18Merge tag 'for-linus-20151217' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD fixes from Brian Norris: "I was holding out on this pull request for a bit, since there are a few other small issues being discussed that look like 4.4-rc regressions. Hopefully I can get those stabilized soon, but these are ready at any rate: - A little bit of a last-minute change for the device tree "fixed partition" binding. This is needed because we might want to reuse the 'partitions' subnode for other sorts of partitioning descriptions -- e.g., for describing which on-flash partition format(s) might be used on the system. - Also tone down a warning message, since it is probably going to show up on a lot of systems where it should just be ignored" * tag 'for-linus-20151217' of git://git.infradead.org/linux-mtd: doc: dt: mtd: partitions: add compatible property to "partitions" node mtd: ofpart: don't complain about missing 'partitions' node too loudly
2015-12-18USB: fix invalid memory access in hub_activate()Alan Stern
Commit 8520f38099cc ("USB: change hub initialization sleeps to delayed_work") changed the hub_activate() routine to make part of it run in a workqueue. However, the commit failed to take a reference to the usb_hub structure or to lock the hub interface while doing so. As a result, if a hub is plugged in and quickly unplugged before the work routine can run, the routine will try to access memory that has been deallocated. Or, if the hub is unplugged while the routine is running, the memory may be deallocated while it is in active use. This patch fixes the problem by taking a reference to the usb_hub at the start of hub_activate() and releasing it at the end (when the work is finished), and by locking the hub interface while the work routine is running. It also adds a check at the start of the routine to see if the hub has already been disconnected, in which nothing should be done. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Alexandru Cornea <alexandru.cornea@intel.com> Tested-by: Alexandru Cornea <alexandru.cornea@intel.com> Fixes: 8520f38099cc ("USB: change hub initialization sleeps to delayed_work") CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-18USB: ipaq.c: fix a timeout loopDan Carpenter
The code expects the loop to end with "retries" set to zero but, because it is a post-op, it will end set to -1. I have fixed this by moving the decrement inside the loop. Fixes: 014aa2a3c32e ('USB: ipaq: minor ipaq_open() cleanup.') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-18[media] airspy: increase USB control message buffer sizeAntti Palosaari
Driver requested device firmware version string during probe using only 24 byte long buffer. That buffer is too small for newer firmware versions, which causes device firmware hang - device stops responding to any commands after that. Increase buffer size to 128 which should be enough for any current and future version strings. Link: https://github.com/airspy/host/issues/27 Cc: <stable@vger.kernel.org> # 3.17+ Reported-by: Benjamin Vernoux <bvernoux@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-12-18[media] hackrf: move RF gain ctrl enable behind module parameterAntti Palosaari
Used Avago MGA-81563 RF amplifier could be destroyed pretty easily with too strong signal or transmitting to bad antenna. Add module parameter 'enable_rf_gain_ctrl' which allows enabling RF gain control - otherwise, default without the module parameter, RF gain control is set to 'grabbed' state which prevents setting value to the control. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-12-18[media] hackrf: fix possible null ptr on debug printingAntti Palosaari
drivers/media/usb/hackrf/hackrf.c:1533 hackrf_probe() error: we previously assumed 'dev' could be null (see line 1366) Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-12-18[media] Revert "[media] ivtv: avoid going past input/audio array"Mauro Carvalho Chehab
This patch broke ivtv logic, as reported at https://bugzilla.redhat.com/show_bug.cgi?id=1278942 This reverts commit 09290cc885937cab3b2d60a6d48fe3d2d3e04061. Cc: stable@vger.kernel.org # for v4.1 and upper Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-12-18Merge tag 'phy-for-4.4-rc' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus Kishon writes: phy: for 4.4 -rc *) Add missing of_node_put in a bunch of PHY drivers *) Add get_device in devm_of_phy_get_by_index() *) Fix randconfig build error in sun9i usb driver
2015-12-18xen-pciback: fix up cleanup path when alloc failsDoug Goldstein
When allocating a pciback device fails, clear the private field. This could lead to an use-after free, however the 'really_probe' takes care of setting dev_set_drvdata(dev, NULL) in its failure path (which we would exercise if the ->probe function failed), so we we are OK. However lets be defensive as the code can change. Going forward we should clean up the pci_set_drvdata(dev, NULL) in the various code-base. That will be for another day. Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reported-by: Jonathan Creekmore <jonathan.creekmore@gmail.com> Signed-off-by: Doug Goldstein <cardoe@cardoe.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2015-12-18hwmon: (sht15) Select CONFIG_BITREVERSEArnd Bergmann
If CONFIG_BITREVERSE is not built-in, the sht15 driver fails to link: drivers/built-in.o: In function `sht15_crc8': drivers/hwmon/sht15.c:195: undefined reference to `byte_rev_table' This adds a Kconfig 'select' statement, like all other users of bitrev.h have it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 33836ee98533 ("hwmon:change sht15_reverse()") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-12-18xen/pciback: Don't allow MSI-X ops if PCI_COMMAND_MEMORY is not set.Konrad Rzeszutek Wilk
commit f598282f51 ("PCI: Fix the NIU MSI-X problem in a better way") teaches us that dealing with MSI-X can be troublesome. Further checks in the MSI-X architecture shows that if the PCI_COMMAND_MEMORY bit is turned of in the PCI_COMMAND we may not be able to access the BAR (since they are memory regions). Since the MSI-X tables are located in there.. that can lead to us causing PCIe errors. Inhibit us performing any operation on the MSI-X unless the MEMORY bit is set. Note that Xen hypervisor with: "x86/MSI-X: access MSI-X table only after having enabled MSI-X" will return: xen_pciback: 0000:0a:00.1: error -6 enabling MSI-X for guest 3! When the generic MSI code tries to setup the PIRQ without MEMORY bit set. Which means with later versions of Xen (4.6) this patch is not neccessary. This is part of XSA-157 CC: stable@vger.kernel.org Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2015-12-18xen/pciback: For XEN_PCI_OP_disable_msi[|x] only disable if device has ↵Konrad Rzeszutek Wilk
MSI(X) enabled. Otherwise just continue on, returning the same values as previously (return of 0, and op->result has the PIRQ value). This does not change the behavior of XEN_PCI_OP_disable_msi[|x]. The pci_disable_msi or pci_disable_msix have the checks for msi_enabled or msix_enabled so they will error out immediately. However the guest can still call these operations and cause us to disable the 'ack_intr'. That means the backend IRQ handler for the legacy interrupt will not respond to interrupts anymore. This will lead to (if the device is causing an interrupt storm) for the Linux generic code to disable the interrupt line. Naturally this will only happen if the device in question is plugged in on the motherboard on shared level interrupt GSI. This is part of XSA-157 CC: stable@vger.kernel.org Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2015-12-18xen/pciback: Do not install an IRQ handler for MSI interrupts.Konrad Rzeszutek Wilk
Otherwise an guest can subvert the generic MSI code to trigger an BUG_ON condition during MSI interrupt freeing: for (i = 0; i < entry->nvec_used; i++) BUG_ON(irq_has_action(entry->irq + i)); Xen PCI backed installs an IRQ handler (request_irq) for the dev->irq whenever the guest writes PCI_COMMAND_MEMORY (or PCI_COMMAND_IO) to the PCI_COMMAND register. This is done in case the device has legacy interrupts the GSI line is shared by the backend devices. To subvert the backend the guest needs to make the backend to change the dev->irq from the GSI to the MSI interrupt line, make the backend allocate an interrupt handler, and then command the backend to free the MSI interrupt and hit the BUG_ON. Since the backend only calls 'request_irq' when the guest writes to the PCI_COMMAND register the guest needs to call XEN_PCI_OP_enable_msi before any other operation. This will cause the generic MSI code to setup an MSI entry and populate dev->irq with the new PIRQ value. Then the guest can write to PCI_COMMAND PCI_COMMAND_MEMORY and cause the backend to setup an IRQ handler for dev->irq (which instead of the GSI value has the MSI pirq). See 'xen_pcibk_control_isr'. Then the guest disables the MSI: XEN_PCI_OP_disable_msi which ends up triggering the BUG_ON condition in 'free_msi_irqs' as there is an IRQ handler for the entry->irq (dev->irq). Note that this cannot be done using MSI-X as the generic code does not over-write dev->irq with the MSI-X PIRQ values. The patch inhibits setting up the IRQ handler if MSI or MSI-X (for symmetry reasons) code had been called successfully. P.S. Xen PCIBack when it sets up the device for the guest consumption ends up writting 0 to the PCI_COMMAND (see xen_pcibk_reset_device). XSA-120 addendum patch removed that - however when upstreaming said addendum we found that it caused issues with qemu upstream. That has now been fixed in qemu upstream. This is part of XSA-157 CC: stable@vger.kernel.org Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2015-12-18xen/pciback: Return error on XEN_PCI_OP_enable_msix when device has MSI or ↵Konrad Rzeszutek Wilk
MSI-X enabled The guest sequence of: a) XEN_PCI_OP_enable_msix b) XEN_PCI_OP_enable_msix results in hitting an NULL pointer due to using freed pointers. The device passed in the guest MUST have MSI-X capability. The a) constructs and SysFS representation of MSI and MSI groups. The b) adds a second set of them but adding in to SysFS fails (duplicate entry). 'populate_msi_sysfs' frees the newly allocated msi_irq_groups (note that in a) pdev->msi_irq_groups is still set) and also free's ALL of the MSI-X entries of the device (the ones allocated in step a) and b)). The unwind code: 'free_msi_irqs' deletes all the entries and tries to delete the pdev->msi_irq_groups (which hasn't been set to NULL). However the pointers in the SysFS are already freed and we hit an NULL pointer further on when 'strlen' is attempted on a freed pointer. The patch adds a simple check in the XEN_PCI_OP_enable_msix to guard against that. The check for msi_enabled is not stricly neccessary. This is part of XSA-157 CC: stable@vger.kernel.org Reviewed-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2015-12-18xen/pciback: Return error on XEN_PCI_OP_enable_msi when device has MSI or ↵Konrad Rzeszutek Wilk
MSI-X enabled The guest sequence of: a) XEN_PCI_OP_enable_msi b) XEN_PCI_OP_enable_msi c) XEN_PCI_OP_disable_msi results in hitting an BUG_ON condition in the msi.c code. The MSI code uses an dev->msi_list to which it adds MSI entries. Under the above conditions an BUG_ON() can be hit. The device passed in the guest MUST have MSI capability. The a) adds the entry to the dev->msi_list and sets msi_enabled. The b) adds a second entry but adding in to SysFS fails (duplicate entry) and deletes all of the entries from msi_list and returns (with msi_enabled is still set). c) pci_disable_msi passes the msi_enabled checks and hits: BUG_ON(list_empty(dev_to_msi_list(&dev->dev))); and blows up. The patch adds a simple check in the XEN_PCI_OP_enable_msi to guard against that. The check for msix_enabled is not stricly neccessary. This is part of XSA-157. CC: stable@vger.kernel.org Reviewed-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2015-12-18xen/pciback: Save xen_pci_op commands before processing itKonrad Rzeszutek Wilk
Double fetch vulnerabilities that happen when a variable is fetched twice from shared memory but a security check is only performed the first time. The xen_pcibk_do_op function performs a switch statements on the op->cmd value which is stored in shared memory. Interestingly this can result in a double fetch vulnerability depending on the performed compiler optimization. This patch fixes it by saving the xen_pci_op command before processing it. We also use 'barrier' to make sure that the compiler does not perform any optimization. This is part of XSA155. CC: stable@vger.kernel.org Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Jan Beulich <JBeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2015-12-18xen-scsiback: safely copy requestsDavid Vrabel
The copy of the ring request was lacking a following barrier(), potentially allowing the compiler to optimize the copy away. Use RING_COPY_REQUEST() to ensure the request is copied to local memory. This is part of XSA155. CC: stable@vger.kernel.org Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2015-12-18xen-blkback: read from indirect descriptors only onceRoger Pau Monné
Since indirect descriptors are in memory shared with the frontend, the frontend could alter the first_sect and last_sect values after they have been validated but before they are recorded in the request. This may result in I/O requests that overflow the foreign page, possibly overwriting local pages when the I/O request is executed. When parsing indirect descriptors, only read first_sect and last_sect once. This is part of XSA155. CC: stable@vger.kernel.org Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2015-12-18xen-blkback: only read request operation from shared ring onceRoger Pau Monné
A compiler may load a switch statement value multiple times, which could be bad when the value is in memory shared with the frontend. When converting a non-native request to a native one, ensure that src->operation is only loaded once by using READ_ONCE(). This is part of XSA155. CC: stable@vger.kernel.org Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2015-12-18xen-netback: use RING_COPY_REQUEST() throughoutDavid Vrabel
Instead of open-coding memcpy()s and directly accessing Tx and Rx requests, use the new RING_COPY_REQUEST() that ensures the local copy is correct. This is more than is strictly necessary for guest Rx requests since only the id and gref fields are used and it is harmless if the frontend modifies these. This is part of XSA155. CC: stable@vger.kernel.org Reviewed-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2015-12-18xen-netback: don't use last request to determine minimum Tx creditDavid Vrabel
The last from guest transmitted request gives no indication about the minimum amount of credit that the guest might need to send a packet since the last packet might have been a small one. Instead allow for the worst case 128 KiB packet. This is part of XSA155. CC: stable@vger.kernel.org Reviewed-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2015-12-18xen: Add RING_COPY_REQUEST()David Vrabel
Using RING_GET_REQUEST() on a shared ring is easy to use incorrectly (i.e., by not considering that the other end may alter the data in the shared ring while it is being inspected). Safe usage of a request generally requires taking a local copy. Provide a RING_COPY_REQUEST() macro to use instead of RING_GET_REQUEST() and an open-coded memcpy(). This takes care of ensuring that the copy is done correctly regardless of any possible compiler optimizations. Use a volatile source to prevent the compiler from reordering or omitting the copy. This is part of XSA155. CC: stable@vger.kernel.org Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>