summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-12-05Linux 4.4.104v4.4.104Greg Kroah-Hartman
2017-12-05nfsd: Fix another OPEN stateid raceTrond Myklebust
commit d8a1a000555ecd1b824ac1ed6df8fe364dfbbbb0 upstream. If nfsd4_process_open2() is initialising a new stateid, and yet the call to nfs4_get_vfs_file() fails for some reason, then we must declare the stateid closed, and unhash it before dropping the mutex. Right now, we unhash the stateid after dropping the mutex, and without changing the stateid type, meaning that another OPEN could theoretically look it up and attempt to use it. Reported-by: Andrew W Elble <aweits@rit.edu> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-05nfsd: Fix stateid races between OPEN and CLOSETrond Myklebust
commit 15ca08d3299682dc49bad73251677b2c5017ef08 upstream. Open file stateids can linger on the nfs4_file list of stateids even after they have been closed. In order to avoid reusing such a stateid, and confusing the client, we need to recheck the nfs4_stid's type after taking the mutex. Otherwise, we risk reusing an old stateid that was already closed, which will confuse clients that expect new stateids to conform to RFC7530 Sections 9.1.4.2 and 16.2.5 or RFC5661 Sections 8.2.2 and 18.2.4. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-05nfsd: Make init_open_stateid() a bit more wholeOleg Drokin
commit 8c7245abda877d4689b3371db8ae2a4400d7d9ce upstream. Move the state selection logic inside from the caller, always making it return correct stp to use. Signed-off-by: J . Bruce Fields <bfields@fieldses.org> Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-05drm/i915: Prevent zero length "index" writeVille Syrjälä
commit 56350fb8978bbf4aafe08f21234e161dd128b417 upstream. The hardware always writes one or two bytes in the index portion of an indexed transfer. Make sure the message we send as the index doesn't have a zero length. Cc: Daniel Kurtz <djkurtz@chromium.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sean Paul <seanpaul@chromium.org> Fixes: 56f9eac05489 ("drm/i915/intel_i2c: use INDEX cycles for i2c read transactions") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171123194157.25367-3-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit bb9e0d4bca50f429152e74a459160b41f3d60fb2) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-05drm/i915: Don't try indexed reads to alternate slave addressesVille Syrjälä
commit ae5c631e605a452a5a0e73205a92810c01ed954b upstream. We can only specify the one slave address to indexed reads/writes. Make sure the messages we check are destined to the same slave address before deciding to do an indexed transfer. Cc: Daniel Kurtz <djkurtz@chromium.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sean Paul <seanpaul@chromium.org> Fixes: 56f9eac05489 ("drm/i915/intel_i2c: use INDEX cycles for i2c read transactions") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171123194157.25367-2-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit c4deb62d7821672265b87952bcd1c808f3bf3e8f) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-05NFS: revalidate "." etc correctly on "open".NeilBrown
commit b688741cb06695312f18b730653d6611e1bad28d upstream. For correct close-to-open semantics, NFS must validate the change attribute of a directory (or file) on open. Since commit ecf3d1f1aa74 ("vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op"), open() of "." or a path ending ".." is not revalidated reliably (except when that direct is a mount point). Prior to that commit, "." was revalidated using nfs_lookup_revalidate() which checks the LOOKUP_OPEN flag and forces revalidation if the flag is set. Since that commit, nfs_weak_revalidate() is used for NFSv3 (which ignores the flags) and nothing is used for NFSv4. This is fixed by using nfs_lookup_verify_inode() in nfs_weak_revalidate(). This does the revalidation exactly when needed. Also, add a definition of .d_weak_revalidate for NFSv4. The incorrect behavior is easily demonstrated by running "echo *" in some non-mountpoint NFS directory while watching network traffic. Without this patch, "echo *" sometimes doesn't produce any traffic. With the patch it always does. Fixes: ecf3d1f1aa74 ("vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op") cc: stable@vger.kernel.org (3.9+) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-05mtd: nand: Fix writing mtdoops to nand flash.Brent Taylor
commit 30863e38ebeb500a31cecee8096fb5002677dd9b upstream. When mtdoops calls mtd_panic_write(), it eventually calls panic_nand_write() in nand_base.c. In order to properly wait for the nand chip to be ready in panic_nand_wait(), the chip must first be selected. When using the atmel nand flash controller, a panic would occur due to a NULL pointer exception. Fixes: 2af7c6539931 ("mtd: Add panic_write for NAND flashes") Cc: <stable@vger.kernel.org> Signed-off-by: Brent Taylor <motobud@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-05drm/panel: simple: Add missing panel_simple_unprepare() callsJonathan Liu
commit f3621a8eb59a913612c8e6e37d81f16b649f8b6c upstream. During panel removal or system shutdown panel_simple_disable() is called which disables the panel backlight but the panel is still powered due to missing calls to panel_simple_unprepare(). Fixes: d02fd93e2cd8 ("drm/panel: simple - Disable panel on shutdown") Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170807115545.27747-1-net147@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-05drm/radeon: fix atombios on big endianRoman Kapl
commit 4f626a4ac8f57ddabf06d03870adab91e463217f upstream. The function for byteswapping the data send to/from atombios was buggy for num_bytes not divisible by four. The function must be aware of the fact that after byte-swapping the u32 units, valid bytes might end up after the num_bytes boundary. This patch was tested on kernel 3.12 and allowed us to sucesfully use DisplayPort on and Radeon SI card. Namely it fixed the link training and EDID readout. The function is patched both in radeon and amd drivers, since the functions and the fixes are identical. Signed-off-by: Roman Kapl <rka@sysgo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-05Revert "drm/radeon: dont switch vt on suspend"Alex Deucher
commit 18c437caa5b18a235dd65cec224eab54bebcee65 upstream. Fixes distorted colors on some cards on resume from suspend. This reverts commit b9729b17a414f99c61f4db9ac9f9ed987fa0cbfe. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=98832 Bug: https://bugs.freedesktop.org/show_bug.cgi?id=99163 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=107001 Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-05bcache: Fix building error on MIPSHuacai Chen
commit cf33c1ee5254c6a430bc1538232b49c3ea13e613 upstream. This patch try to fix the building error on MIPS. The reason is MIPS has already defined the PTR macro, which conflicts with the PTR macro in include/uapi/linux/bcache.h. [fixed by mlyle: corrected a line-length issue] Signed-off-by: Huacai Chen <chenhc@lemote.com> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-05eeprom: at24: check at24_read/write argumentsHeiner Kallweit
commit d9bcd462daf34aebb8de9ad7f76de0198bb5a0f0 upstream. So far we completely rely on the caller to provide valid arguments. To be on the safe side perform an own sanity check. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-05mmc: core: Do not leave the block driver in a suspended stateAdrian Hunter
commit ebe7dd45cf49e3b49cacbaace17f9f878f21fbea upstream. The block driver must be resumed if the mmc bus fails to suspend the card. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-05KVM: x86: inject exceptions produced by x86_decode_insnPaolo Bonzini
commit 6ea6e84309ca7e0e850b3083e6b09344ee15c290 upstream. Sometimes, a processor might execute an instruction while another processor is updating the page tables for that instruction's code page, but before the TLB shootdown completes. The interesting case happens if the page is in the TLB. In general, the processor will succeed in executing the instruction and nothing bad happens. However, what if the instruction is an MMIO access? If *that* happens, KVM invokes the emulator, and the emulator gets the updated page tables. If the update side had marked the code page as non present, the page table walk then will fail and so will x86_decode_insn. Unfortunately, even though kvm_fetch_guest_virt is correctly returning X86EMUL_PROPAGATE_FAULT, x86_decode_insn's caller treats the failure as a fatal error if the instruction cannot simply be reexecuted (as is the case for MMIO). And this in fact happened sometimes when rebooting Windows 2012r2 guests. Just checking ctxt->have_exception and injecting the exception if true is enough to fix the case. Thanks to Eduardo Habkost for helping in the debugging of this issue. Reported-by: Yanan Fu <yfu@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-05KVM: x86: Exit to user-mode on #UD intercept when emulator requiresLiran Alon
commit 61cb57c9ed631c95b54f8e9090c89d18b3695b3c upstream. Instruction emulation after trapping a #UD exception can result in an MMIO access, for example when emulating a MOVBE on a processor that doesn't support the instruction. In this case, the #UD vmexit handler must exit to user mode, but there wasn't any code to do so. Add it for both VMX and SVM. Signed-off-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-05KVM: x86: pvclock: Handle first-time write to pvclock-page contains random junkLiran Alon
commit 51c4b8bba674cfd2260d173602c4dac08e4c3a99 upstream. When guest passes KVM it's pvclock-page GPA via WRMSR to MSR_KVM_SYSTEM_TIME / MSR_KVM_SYSTEM_TIME_NEW, KVM don't initialize pvclock-page to some start-values. It just requests a clock-update which will happen before entering to guest. The clock-update logic will call kvm_setup_pvclock_page() to update the pvclock-page with info. However, kvm_setup_pvclock_page() *wrongly* assumes that the version-field is initialized to an even number. This is wrong because at first-time write, field could be any-value. Fix simply makes sure that if first-time version-field is odd, increment it once more to make it even and only then start standard logic. This follows same logic as done in other pvclock shared-pages (See kvm_write_wall_clock() and record_steal_time()). Signed-off-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-05btrfs: clear space cache inode generation alwaysJosef Bacik
commit 8e138e0d92c6c9d3d481674fb14e3439b495be37 upstream. We discovered a box that had double allocations, and suspected the space cache may be to blame. While auditing the write out path I noticed that if we've already setup the space cache we will just carry on. This means that any error we hit after cache_save_setup before we go to actually write the cache out we won't reset the inode generation, so whatever was already written will be considered correct, except it'll be stale. Fix this by _always_ resetting the generation on the block group inode, this way we only ever have valid or invalid cache. With this patch I was no longer able to reproduce cache corruption with dm-log-writes and my bpf error injection tool. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-05mm/madvise.c: fix madvise() infinite loop under special circumstanceschenjie
commit 6ea8d958a2c95a1d514015d4e29ba21a8c0a1a91 upstream. MADVISE_WILLNEED has always been a noop for DAX (formerly XIP) mappings. Unfortunately madvise_willneed() doesn't communicate this information properly to the generic madvise syscall implementation. The calling convention is quite subtle there. madvise_vma() is supposed to either return an error or update &prev otherwise the main loop will never advance to the next vma and it will keep looping for ever without a way to get out of the kernel. It seems this has been broken since introduction. Nobody has noticed because nobody seems to be using MADVISE_WILLNEED on these DAX mappings. [mhocko@suse.com: rewrite changelog] Link: http://lkml.kernel.org/r/20171127115318.911-1-guoxuenan@huawei.com Fixes: fe77ba6f4f97 ("[PATCH] xip: madvice/fadvice: execute in place") Signed-off-by: chenjie <chenjie6@huawei.com> Signed-off-by: guoxuenan <guoxuenan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: zhangyi (F) <yi.zhang@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Shaohua Li <shli@fb.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-05mm, thp: Do not make page table dirty unconditionally in touch_p[mu]d()Kirill A. Shutemov
commit a8f97366452ed491d13cf1e44241bc0b5740b1f0 upstream. Currently, we unconditionally make page table dirty in touch_pmd(). It may result in false-positive can_follow_write_pmd(). We may avoid the situation, if we would only make the page table entry dirty if caller asks for write access -- FOLL_WRITE. The patch also changes touch_pud() in the same way. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [Salvatore Bonaccorso: backport for 3.16: - Adjust context - Drop specific part for PUD-sized transparent hugepages. Support for PUD-sized transparent hugepages was added in v4.11-rc1 ] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-05x86/efi-bgrt: Replace early_memremap() with memremap()Matt Fleming
commit e2c90dd7e11e3025b46719a79fb4bb1e7a5cef9f upstream. Môshe reported the following warning triggered on his machine since commit 50a0cb565246 ("x86/efi-bgrt: Fix kernel panic when mapping BGRT data"), [ 0.026936] ------------[ cut here ]------------ [ 0.026941] WARNING: CPU: 0 PID: 0 at mm/early_ioremap.c:137 __early_ioremap+0x102/0x1bb() [ 0.026941] Modules linked in: [ 0.026944] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.0-rc1 #2 [ 0.026945] Hardware name: Dell Inc. XPS 13 9343/09K8G1, BIOS A05 07/14/2015 [ 0.026946] 0000000000000000 900f03d5a116524d ffffffff81c03e60 ffffffff813a3fff [ 0.026948] 0000000000000000 ffffffff81c03e98 ffffffff810a0852 00000000d7b76000 [ 0.026949] 0000000000000000 0000000000000001 0000000000000001 000000000000017c [ 0.026951] Call Trace: [ 0.026955] [<ffffffff813a3fff>] dump_stack+0x44/0x55 [ 0.026958] [<ffffffff810a0852>] warn_slowpath_common+0x82/0xc0 [ 0.026959] [<ffffffff810a099a>] warn_slowpath_null+0x1a/0x20 [ 0.026961] [<ffffffff81d8c395>] __early_ioremap+0x102/0x1bb [ 0.026962] [<ffffffff81d8c602>] early_memremap+0x13/0x15 [ 0.026964] [<ffffffff81d78361>] efi_bgrt_init+0x162/0x1ad [ 0.026966] [<ffffffff81d778ec>] efi_late_init+0x9/0xb [ 0.026968] [<ffffffff81d58ff5>] start_kernel+0x46f/0x49f [ 0.026970] [<ffffffff81d58120>] ? early_idt_handler_array+0x120/0x120 [ 0.026972] [<ffffffff81d58339>] x86_64_start_reservations+0x2a/0x2c [ 0.026974] [<ffffffff81d58485>] x86_64_start_kernel+0x14a/0x16d [ 0.026977] ---[ end trace f9b3812eb8e24c58 ]--- [ 0.026978] efi_bgrt: Ignoring BGRT: failed to map image memory early_memremap() has an upper limit on the size of mapping it can handle which is ~200KB. Clearly the BGRT image on Môshe's machine is much larger than that. There's actually no reason to restrict ourselves to using the early_* version of memremap() - the ACPI BGRT driver is invoked late enough in boot that we can use the standard version, with the benefit that the late version allows mappings of arbitrary size. Reported-by: Môshe van der Sterre <me@moshe.nl> Tested-by: Môshe van der Sterre <me@moshe.nl> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1450707172-12561-1-git-send-email-matt@codeblueprint.co.uk Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "Ghannam, Yazen" <Yazen.Ghannam@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-05x86/efi-bgrt: Fix kernel panic when mapping BGRT dataSai Praneeth
commit 50a0cb565246f20d59cdb161778531e4b19d35ac upstream. Starting with this commit 35eb8b81edd4 ("x86/efi: Build our own page table structures") efi regions have a separate page directory called "efi_pgd". In order to access any efi region we have to first shift %cr3 to this page table. In the bgrt code we are trying to copy bgrt_header and image, but these regions fall under "EFI_BOOT_SERVICES_DATA" and to access these regions we have to shift %cr3 to efi_pgd and not doing so will cause page fault as shown below. [ 0.251599] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.259126] Freeing SMP alternatives memory: 32K (ffffffff8230e000 - ffffffff82316000) [ 0.271803] BUG: unable to handle kernel paging request at fffffffefce35002 [ 0.279740] IP: [<ffffffff821bca49>] efi_bgrt_init+0x144/0x1fd [ 0.286383] PGD 300f067 PUD 0 [ 0.289879] Oops: 0000 [#1] SMP [ 0.293566] Modules linked in: [ 0.297039] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.0-rc1-eywa-eywa-built-in-47041+ #2 [ 0.306619] Hardware name: Intel Corporation Skylake Client platform/Skylake Y LPDDR3 RVP3, BIOS SKLSE2R1.R00.B104.B01.1511110114 11/11/2015 [ 0.320925] task: ffffffff820134c0 ti: ffffffff82000000 task.ti: ffffffff82000000 [ 0.329420] RIP: 0010:[<ffffffff821bca49>] [<ffffffff821bca49>] efi_bgrt_init+0x144/0x1fd [ 0.338821] RSP: 0000:ffffffff82003f18 EFLAGS: 00010246 [ 0.344852] RAX: fffffffefce35000 RBX: fffffffefce35000 RCX: fffffffefce2b000 [ 0.352952] RDX: 000000008a82b000 RSI: ffffffff8235bb80 RDI: 000000008a835000 [ 0.361050] RBP: ffffffff82003f30 R08: 000000008a865000 R09: ffffffffff202850 [ 0.369149] R10: ffffffff811ad62f R11: 0000000000000000 R12: 0000000000000000 [ 0.377248] R13: ffff88016dbaea40 R14: ffffffff822622c0 R15: ffffffff82003fb0 [ 0.385348] FS: 0000000000000000(0000) GS:ffff88016d800000(0000) knlGS:0000000000000000 [ 0.394533] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.401054] CR2: fffffffefce35002 CR3: 000000000300c000 CR4: 00000000003406f0 [ 0.409153] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 0.417252] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 0.425350] Stack: [ 0.427638] ffffffffffffffff ffffffff82256900 ffff88016dbaea40 ffffffff82003f40 [ 0.436086] ffffffff821bbce0 ffffffff82003f88 ffffffff8219c0c2 0000000000000000 [ 0.444533] ffffffff8219ba4a ffffffff822622c0 0000000000083000 00000000ffffffff [ 0.452978] Call Trace: [ 0.455763] [<ffffffff821bbce0>] efi_late_init+0x9/0xb [ 0.461697] [<ffffffff8219c0c2>] start_kernel+0x463/0x47f [ 0.467928] [<ffffffff8219ba4a>] ? set_init_arg+0x55/0x55 [ 0.474159] [<ffffffff8219b120>] ? early_idt_handler_array+0x120/0x120 [ 0.481669] [<ffffffff8219b5ee>] x86_64_start_reservations+0x2a/0x2c [ 0.488982] [<ffffffff8219b72d>] x86_64_start_kernel+0x13d/0x14c [ 0.495897] Code: 00 41 b4 01 48 8b 78 28 e8 09 36 01 00 48 85 c0 48 89 c3 75 13 48 c7 c7 f8 ac d3 81 31 c0 e8 d7 3b fb fe e9 b5 00 00 00 45 84 e4 <44> 8b 6b 02 74 0d be 06 00 00 00 48 89 df e8 ae 34 0$ [ 0.518151] RIP [<ffffffff821bca49>] efi_bgrt_init+0x144/0x1fd [ 0.524888] RSP <ffffffff82003f18> [ 0.528851] CR2: fffffffefce35002 [ 0.532615] ---[ end trace 7b06521e6ebf2aea ]--- [ 0.537852] Kernel panic - not syncing: Attempted to kill the idle task! As said above one way to fix this bug is to shift %cr3 to efi_pgd but we are not doing that way because it leaks inner details of how we switch to EFI page tables into a new call site and it also adds duplicate code. Instead, we remove the call to efi_lookup_mapped_addr() and always perform early_mem*() instead of early_io*() because we want to remap RAM regions and not I/O regions. We also delete efi_lookup_mapped_addr() because we are no longer using it. Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Reported-by: Wendy Wang <wendy.wang@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Ricardo Neri <ricardo.neri@intel.com> Cc: Ravi Shankar <ravi.v.shankar@intel.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> Cc: "Ghannam, Yazen" <Yazen.Ghannam@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-05ARM: dts: omap3: logicpd-torpedo-37xx-devkit: Fix MMC1 cd-gpioAdam Ford
commit b7ace5ed8867ca54503727988adec6b20af54eeb upstream. Fixes commit 687c27676151 ("ARM: dts: Add minimal support for LogicPD Torpedo DM3730 devkit") This patch corrects an issue where the cd-gpios was improperly setup using IRQ_TYPE_LEVEL_LOW instead of GPIO_ACTIVE_LOW. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-05x86/efi: Build our own page table structuresMatt Fleming
commit 67a9108ed4313b85a9c53406d80dc1ae3f8c3e36 upstream. With commit e1a58320a38d ("x86/mm: Warn on W^X mappings") all users booting on 64-bit UEFI machines see the following warning, ------------[ cut here ]------------ WARNING: CPU: 7 PID: 1 at arch/x86/mm/dump_pagetables.c:225 note_page+0x5dc/0x780() x86/mm: Found insecure W+X mapping at address ffff88000005f000/0xffff88000005f000 ... x86/mm: Checked W+X mappings: FAILED, 165660 W+X pages found. ... This is caused by mapping EFI regions with RWX permissions. There isn't much we can do to restrict the permissions for these regions due to the way the firmware toolchains mix code and data, but we can at least isolate these mappings so that they do not appear in the regular kernel page tables. In commit d2f7cbe7b26a ("x86/efi: Runtime services virtual mapping") we started using 'trampoline_pgd' to map the EFI regions because there was an existing identity mapping there which we use during the SetVirtualAddressMap() call and for broken firmware that accesses those addresses. But 'trampoline_pgd' shares some PGD entries with 'swapper_pg_dir' and does not provide the isolation we require. Notably the virtual address for __START_KERNEL_map and MODULES_START are mapped by the same PGD entry so we need to be more careful when copying changes over in efi_sync_low_kernel_mappings(). This patch doesn't go the full mile, we still want to share some PGD entries with 'swapper_pg_dir'. Having completely separate page tables brings its own issues such as synchronising new mappings after memory hotplug and module loading. Sharing also keeps memory usage down. Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> Reviewed-by: Borislav Petkov <bp@suse.de> Acked-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1448658575-17029-6-git-send-email-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: "Ghannam, Yazen" <Yazen.Ghannam@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-05x86/efi: Hoist page table switching code into efi_call_virt()Matt Fleming
commit c9f2a9a65e4855b74d92cdad688f6ee4a1a323ff upstream. This change is a prerequisite for pending patches that switch to a dedicated EFI page table, instead of using 'trampoline_pgd' which shares PGD entries with 'swapper_pg_dir'. The pending patches make it impossible to dereference the runtime service function pointer without first switching %cr3. It's true that we now have duplicated switching code in efi_call_virt() and efi_call_phys_{prolog,epilog}() but we are sacrificing code duplication for a little more clarity and the ease of writing the page table switching code in C instead of asm. Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> Reviewed-by: Borislav Petkov <bp@suse.de> Acked-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1448658575-17029-5-git-send-email-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: "Ghannam, Yazen" <Yazen.Ghannam@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-05x86/mm/pat: Ensure cpa->pfn only contains page frame numbersMatt Fleming
commit edc3b9129cecd0f0857112136f5b8b1bc1d45918 upstream. The x86 pageattr code is confused about the data that is stored in cpa->pfn, sometimes it's treated as a page frame number, sometimes it's treated as an unshifted physical address, and in one place it's treated as a pte. The result of this is that the mapping functions do not map the intended physical address. This isn't a problem in practice because most of the addresses we're mapping in the EFI code paths are already mapped in 'trampoline_pgd' and so the pageattr mapping functions don't actually do anything in this case. But when we move to using a separate page table for the EFI runtime this will be an issue. Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> Reviewed-by: Borislav Petkov <bp@suse.de> Acked-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1448658575-17029-3-git-send-email-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: "Ghannam, Yazen" <Yazen.Ghannam@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-05ipsec: Fix aborted xfrm policy dump crashHerbert Xu
commit 1137b5e2529a8f5ca8ee709288ecba3e68044df2 upstream. An independent security researcher, Mohamed Ghannam, has reported this vulnerability to Beyond Security's SecuriTeam Secure Disclosure program. The xfrm_dump_policy_done function expects xfrm_dump_policy to have been called at least once or it will crash. This can be triggered if a dump fails because the target socket's receive buffer is full. This patch fixes it by using the cb->start mechanism to ensure that the initialisation is always done regardless of the buffer situation. Fixes: 12a169e7d8f4 ("ipsec: Put dumpers on the dump list") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-05netlink: add a start callback for starting a netlink dumpTom Herbert
commit fc9e50f5a5a4e1fa9ba2756f745a13e693cf6a06 upstream. The start callback allows the caller to set up a context for the dump callbacks. Presumably, the context can then be destroyed in the done callback. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30Linux 4.4.103v4.4.103Greg Kroah-Hartman
2017-11-30Revert "sctp: do not peel off an assoc from one netns to another one"Greg Kroah-Hartman
This reverts commit 2a0e60907e54dad75e9b3568d02bec11d6e74f6b which is commit df80cd9b28b9ebaa284a41df611dbf3a2d05ca74 upstream as I messed up by applying it to the tree twice. Reported-by: Michal Kubecek <mkubecek@suse.cz> Cc: ChunYu Wang <chunwang@redhat.com> Cc: Xin Long <lucien.xin@gmail.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30xen: xenbus driver must not accept invalid transaction idsJuergen Gross
[ Upstream commit 639b08810d6ad74ded2c5f6e233c4fcb9d147168 ] When accessing Xenstore in a transaction the user is specifying a transaction id which he normally obtained from Xenstore when starting the transaction. Xenstore is validating a transaction id against all known transaction ids of the connection the request came in. As all requests of a domain not being the one where Xenstore lives share one connection, validation of transaction ids of different users of Xenstore in that domain should be done by the kernel of that domain being the multiplexer between the Xenstore users in that domain and Xenstore. In order to prohibit one Xenstore user "hijacking" a transaction from another user the xenbus driver has to verify a given transaction id against all known transaction ids of the user before forwarding it to Xenstore. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30s390/kbuild: enable modversions for symbols exported from asmHeiko Carstens
[ Upstream commit cabab3f9f5ca077535080b3252e6168935b914af ] s390 version of commit 334bb7738764 ("x86/kbuild: enable modversions for symbols exported from asm") so we get also rid of all these warnings: WARNING: EXPORT symbol "_mcount" [vmlinux] version generation failed, symbol will not be versioned. WARNING: EXPORT symbol "memcpy" [vmlinux] version generation failed, symbol will not be versioned. WARNING: EXPORT symbol "memmove" [vmlinux] version generation failed, symbol will not be versioned. WARNING: EXPORT symbol "memset" [vmlinux] version generation failed, symbol will not be versioned. WARNING: EXPORT symbol "save_fpu_regs" [vmlinux] version generation failed, symbol will not be versioned. WARNING: EXPORT symbol "sie64a" [vmlinux] version generation failed, symbol will not be versioned. WARNING: EXPORT symbol "sie_exit" [vmlinux] version generation failed, symbol will not be versioned. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30ASoC: wm_adsp: Don't overrun firmware file buffer when reading region dataRichard Fitzgerald
[ Upstream commit 1cab2a84f470e15ecc8e5143bfe9398c6e888032 ] Protect against corrupt firmware files by ensuring that the length we get for the data in a region actually lies within the available firmware file data buffer. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30btrfs: return the actual error value from from btrfs_uuid_tree_iteratePan Bian
[ Upstream commit 73ba39ab9307340dc98ec3622891314bbc09cc2e ] In function btrfs_uuid_tree_iterate(), errno is assigned to variable ret on errors. However, it directly returns 0. It may be better to return ret. This patch also removes the warning, because the caller already prints a warning. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188731 Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Omar Sandoval <osandov@fb.com> [ edited subject ] Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30ASoC: rsnd: don't double free kctrlColin Ian King
[ Upstream commit 0ea617a298dcdc2251b4e10f83ac3f3e627b66e3 ] On an error, snd_ctl_add already free's kctrl, so calling snd_ctl_free_one to free it again leads to a double free error. Fix this by removing the extraneous snd_ctl_free_one call. Issue found using static analysis with CoverityScan, CID 1372908 Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30netfilter: nf_tables: fix oob accessFlorian Westphal
[ Upstream commit 3e38df136e453aa69eb4472108ebce2fb00b1ba6 ] BUG: KASAN: slab-out-of-bounds in nf_tables_rule_destroy+0xf1/0x130 at addr ffff88006a4c35c8 Read of size 8 by task nft/1607 When we've destroyed last valid expr, nft_expr_next() returns an invalid expr. We must not dereference it unless it passes != nft_expr_last() check. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30netfilter: nft_queue: use raw_smp_processor_id()Pablo Neira Ayuso
[ Upstream commit c2e756ff9e699865d294cdc112acfc36419cf5cc ] Using smp_processor_id() causes splats with PREEMPT_RCU: [19379.552780] BUG: using smp_processor_id() in preemptible [00000000] code: ping/32389 [19379.552793] caller is debug_smp_processor_id+0x17/0x19 [...] [19379.552823] Call Trace: [19379.552832] [<ffffffff81274e9e>] dump_stack+0x67/0x90 [19379.552837] [<ffffffff8129a4d4>] check_preemption_disabled+0xe5/0xf5 [19379.552842] [<ffffffff8129a4fb>] debug_smp_processor_id+0x17/0x19 [19379.552849] [<ffffffffa07c42dd>] nft_queue_eval+0x35/0x20c [nft_queue] No need to disable preemption since we only fetch the numeric value, so let's use raw_smp_processor_id() instead. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30spi: SPI_FSL_DSPI should depend on HAS_DMAGeert Uytterhoeven
[ Upstream commit dadab2d4e3cf708ceba22ecddd94aedfecb39199 ] If NO_DMA=y: ERROR: "bad_dma_ops" [drivers/spi/spi-fsl-dspi.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30staging: iio: cdc: fix improper return valuePan Bian
[ Upstream commit 91ca1a8c584f55857b1f6ab20a1d3a1ce7a559bb ] At the end of function ad7150_write_event_config(), directly returns 0. As a result, the errors will be ignored by the callers. It may be better to return variable "ret". Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30iio: light: fix improper return valuePan Bian
[ Upstream commit db4e5376d058af8924fafd0520a0942d92538d0e ] In function cm3232_reg_init(), it returns 0 even if the last call to i2c_smbus_write_byte_data() returns a negative value (indicates error). As a result, the return value may be inconsistent with the execution status, and the caller of cm3232_reg_init() will not be able to detect the error. This patch fixes the bug. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188641 Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30mac80211: Suppress NEW_PEER_CANDIDATE event if no roomMasashi Honma
[ Upstream commit 11197d006bcfabf0173a7820a163fcaac420d10e ] Previously, kernel sends NEW_PEER_CANDIDATE event to user land even if the found peer does not have any room to accept other peer. This causes continuous connection trials. Signed-off-by: Masashi Honma <masashi.honma@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30mac80211: Remove invalid flag operations in mesh TSF synchronizationMasashi Honma
[ Upstream commit 76f43b4c0a9337af22827d78de4f2b8fd5328489 ] mesh_sync_offset_adjust_tbtt() implements Extensible synchronization framework ([1] 13.13.2 Extensible synchronization framework). It shall not operate the flag "TBTT Adjusting subfield" ([1] 8.4.2.100.8 Mesh Capability), since it is used only for MBCA ([1] 13.13.4 Mesh beacon collision avoidance, see 13.13.4.4.3 TBTT scanning and adjustment procedures for detail). So this patch remove the flag operations. [1] IEEE Std 802.11 2012 Signed-off-by: Masashi Honma <masashi.honma@gmail.com> [remove adjusting_tbtt entirely, since it's now unused] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30drm: Apply range restriction after color adjustment when allocationChris Wilson
[ Upstream commit 3db93756b501e5f0a3951c79cfa9ed43c26d3455 ] mm->color_adjust() compares the hole with its neighbouring nodes. They only abutt before we restrict the hole, so we have to apply color_adjust before we apply the range restriction. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-36-chris@chris-wilson.co.uk Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30ALSA: hda - Apply ALC269_FIXUP_NO_SHUTUP on HDA_FIXUP_ACT_PROBEGabriele Mazzotta
[ Upstream commit 972aa2c708703c21f14eb958b37e82aae2530e44 ] Setting shutup when the action is HDA_FIXUP_ACT_PRE_PROBE might not have the desired effect since it could be overridden by another more generic shutup function. Prevent this by setting the more specific shutup function on HDA_FIXUP_ACT_PROBE. Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30ath10k: set CTS protection VDEV param only if VDEV is upBartosz Markowski
[ Upstream commit 7cfe0455ee1218add152e986b89b4bb8dbeafcdd ] The cts protection vdev parameter, in new QCA9377 TF2.0 firmware, requires bss peer to be created for the STATION vdev type. bss peer is being allocated by the firmware after vdev_start/_up commands. mac80211 may call the cts protection setup at any time, so the we needs to track the situation and defer the cts configuration to prevent firmware asserts, like below: [00]: 0x05020001 0x000015B3 0x0099ACE2 0x00955B31 [04]: 0x0099ACE2 0x00060730 0x00000004 0x00000000 [08]: 0x0044C754 0x00412C10 0x00000000 0x00409C54 [12]: 0x00000009 0x00000000 0x00952F6C 0x00952F77 [16]: 0x00952CC4 0x00910712 0x00000000 0x00000000 [20]: 0x4099ACE2 0x0040E858 0x00421254 0x004127F4 [24]: 0x8099B9B2 0x0040E8B8 0x00000000 0xC099ACE2 [28]: 0x800B75CB 0x0040E8F8 0x00000007 0x00005008 [32]: 0x809B048A 0x0040E958 0x00000010 0x00433B10 [36]: 0x809AFBBC 0x0040E9A8 0x0042BB74 0x0042BBBC [40]: 0x8091D252 0x0040E9C8 0x0042BBBC 0x00000001 [44]: 0x809FFA45 0x0040EA78 0x0043D3E4 0x0042C2C8 [48]: 0x809FCEF4 0x0040EA98 0x0043D3E4 0x00000001 [52]: 0x80911210 0x0040EAE8 0x00000010 0x004041D0 [56]: 0x80911154 0x0040EB28 0x00400000 0x00000000 Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30ath10k: fix potential memory leak in ath10k_wmi_tlv_op_pull_fw_stats()Christian Lamparter
[ Upstream commit 097e46d2ae90265d1afe141ba6208ba598b79e01 ] ath10k_wmi_tlv_op_pull_fw_stats() uses tb = ath10k_wmi_tlv_parse_alloc(...) function, which allocates memory. If any of the three error-paths are taken, this tb needs to be freed. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30ath10k: ignore configuring the incorrect board_idRyan Hsu
[ Upstream commit d2e202c06ca42d353d95df12437740921a6d05b5 ] With command to get board_id from otp, in the case of following boot get otp board id result 0x00000000 board_id 0 chip_id 0 boot using board name 'bus=pci,bmi-chip-id=0,bmi-board-id=0" ... failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=0 from ath10k/QCA6174/hw3.0/board-2.bin The invalid board_id=0 will be used as index to search in the board-2.bin. Ignore the case with board_id=0, as it means the otp is not carrying the board id information. Signed-off-by: Ryan Hsu <ryanhsu@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30ath10k: fix incorrect txpower set by P2P_DEVICE interfaceRyan Hsu
[ Upstream commit 88407beb1b1462f706a1950a355fd086e1c450b6 ] Ath10k reports the phy capability that supports P2P_DEVICE interface. When we use the P2P supported wpa_supplicant to start connection, it'll create two interfaces, one is wlan0 (vdev_id=0) and one is P2P_DEVICE p2p-dev-wlan0 which is for p2p control channel (vdev_id=1). ath10k_pci mac vdev create 0 (add interface) type 2 subtype 0 ath10k_add_interface: vdev_id: 0, txpower: 0, bss_power: 0 ... ath10k_pci mac vdev create 1 (add interface) type 2 subtype 1 ath10k_add_interface: vdev_id: 1, txpower: 0, bss_power: 0 And the txpower in per vif bss_conf will only be set to valid tx power when the interface is assigned with channel_ctx. But this P2P_DEVICE interface will never be used for any connection, so that the uninitialized bss_conf.txpower=0 is assinged to the arvif->txpower when interface created. Since the txpower configuration is firmware per physical interface. So the smallest txpower of all vifs will be the one limit the tx power of the physical device, that causing the low txpower issue on other active interfaces. wlan0: Limiting TX power to 21 (24 - 3) dBm ath10k_pci mac vdev_id 0 txpower 21 ath10k_mac_txpower_recalc: vdev_id: 1, txpower: 0 ath10k_mac_txpower_recalc: vdev_id: 0, txpower: 21 ath10k_pci mac txpower 0 This issue only happens when we use the wpa_supplicant that supports P2P or if we use the iw tool to create the control P2P_DEVICE interface. Signed-off-by: Ryan Hsu <ryanhsu@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30drm/armada: Fix compile failDaniel Vetter
[ Upstream commit 7357f89954b6d005df6ab8929759e78d7d9a80f9 ] I reported the include issue for tracepoints a while ago, but nothing seems to have happened. Now it bit us, since the drm_mm_print conversion was broken for armada. Fix it, so I can re-enable armada in the drm-misc build configs. v2: Rebase just the compile fix on top of Chris' build fix. Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Acked: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1483115932-19584-1-git-send-email-daniel.vetter@ffwll.ch Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30net: 3com: typhoon: typhoon_init_one: fix incorrect return valuesThomas Preisner
[ Upstream commit 107fded7bf616ad6f46823d98b8ed6405d7adf2d ] In a few cases the err-variable is not set to a negative error code if a function call in typhoon_init_one() fails and thus 0 is returned instead. It may be better to set err to the appropriate negative error code before returning. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188841 Reported-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Thomas Preisner <thomas.preisner+linux@fau.de> Signed-off-by: Milan Stephan <milan.stephan+linux@fau.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-31 06:58:20 +0000