summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-10-12libata-pmp: hook PMP support and enable itTejun Heo
Hook PMP support into libata and enable it. Connect SCR and probing functions, and update ata_dev_classify() to detect PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata-pmp: implement Port Multiplier supportTejun Heo
Implement Port Multiplier support. To support PMP, a LLDD has to supply ops->pmp_read() and pmp_write(). If non-null, ->pmp_attach and ->pmp_detach are called on PMP attach and detach, respectively. ->pmp_read/write() can be called while the port is frozen, so they must be implemented by polling. This patch supplies several helpers to ease ->pmp_read/write() implementation. Also, irq_handler and error_handler must be PMP aware. Most of PMP aware EH can be done by calling ata_pmp_do_eh() with appropriate methods. PMP EH uses separate set of reset methods and this patch implements standard prereset, hardreset and postreset methods. This patch only implements PMP support. The next patch will integrate PMP into the reset of libata and thus enable PMP support. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata-pmp: update ata_eh_reset() for PMPTejun Heo
PMP always requires SRST to be enabled. Also, hardreset reports classification code from the first device when PMP is attached, not from the PMP. Update ata_eh_reset() such that followup softreset is performed if the controller is PMP capable and the host link is being reset. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12[PATCH] libata: Fix HPA handling regressionAlan Cox
Restore the support for handling drives that report one sector too many (ie SCSI not ATA style). This worked before the HPA update but was removed in that process. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12[libata] ata_piix: add HP compaq laptop to short cable listJeff Garzik
Reported by Andreas Messer. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12pata_ns87415: Initial cut at 87415/87560 IDE supportAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> [plus SuperIO fixes by Kyle McMartin] [plus a cleanup from me] Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata-core: blacklist HITACHI HDS drives using wildcard blacklist matchingDavid Milburn
Blacklist HITACHI HDS7250SASUN500G and HITACHI HDS7225SBSUN250G drives using wildcard matching. Signed-off-by David Milburn <dmilburn@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata: update spurious NCQ completion blacklistTejun Heo
* The firmware version of ST3160812AS is "3.ADJ" no "3.AD". * Add several entries from various sources. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata: correct kernel parameter in documentation.Dave Jones
'noacpi' isn't a standalone parameter, give it its prefix. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12pata_pdc202xx_old MWDMA fixes, and notesAlan Cox
I've been doing an audit of this driver to try and find out why we have problems with some Clevo boxes that use it. Didn't get anywhere other than to discover all the bug reporters I have use vmware, which may or may not be chance. In the process however I did find out our MWDMA2 performance was a bit low and code review showed the MWDMA0/2 timings are reversed due to a thinko in the table ordering Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12pata_atiixp: Audit notes on lockingAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12[libata] AHCI: enable AHCI mode, before using AHCI resetJeff Garzik
AHCI spec says host-reset bit may only be set when the ahci-enable bit is also set. Noticed by Peer Chen <peerchen@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata: Fix build failure on ppc64 drivers/ata/pata_scc.cSatyam Sharma
Little fixlets, that the build started erroring / warning about: drivers/ata/pata_scc.c: In function 'scc_bmdma_status': drivers/ata/pata_scc.c:734: error: structure has no member named 'active_tag' drivers/ata/pata_scc.c: In function 'scc_pata_prereset': drivers/ata/pata_scc.c:866: warning: passing arg 1 of 'ata_std_prereset' from incompatible pointer type drivers/ata/pata_scc.c: In function 'scc_error_handler': drivers/ata/pata_scc.c:908: warning: passing arg 2 of 'ata_bmdma_drive_eh' from incompatible pointer type drivers/ata/pata_scc.c:908: warning: passing arg 3 of 'ata_bmdma_drive_eh' from incompatible pointer type drivers/ata/pata_scc.c:908: warning: passing arg 5 of 'ata_bmdma_drive_eh' from incompatible pointer type make[2]: *** [drivers/ata/pata_scc.o] Error 1 Signed-off-by: Satyam Sharma <satyam@infradead.org> Cc: Alan Cox <alan@redhat.com> Cc: Mel Gorman <mel@skynet.ie> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12sata_via: kill SATA_PATA_SHARING register handlingTejun Heo
The SATA_PATA_SHARING register doesn't have anything to do with the SATA part of the controller. It indicates whether an extern SATA PHY is attached to the PATA part of the controller and if so how it is wired. As the PATA part is driven by pata_via, sata_via has no reason to care about that. Also, pata_via should work fine under all configurations. This patch removes unnecessary attach failures. It seems recent via chipsets are defaulting to different values or are actually connected to SATA PHY triggering this more often. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata: fix ata_set_max_sectors()Tejun Heo
In ata_set_max_sectors(), the highest nibble in LBA28 mode was missing. This made drives sized between 8G and 128G with HPA turned on to be resized to under 8G. Fix it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata-pmp-prep: implement sata_async_notification()Tejun Heo
AN serves multiple purposes. For ATAPI, it's used for media change notification. For PMP, for downstream PHY status change notification. Implement sata_async_notification() which demultiplexes AN. To avoid unnecessary port events, ATAPI AN is not enabled if PMP is attached but SNTF is not available. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Kriten Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata-pmp-prep: implement ATA_HORKAGE_SKIP_PMTejun Heo
Some pseudo devices fail PM commands unnecessarily aborting system suspend. Implement ATA_HORKAGE_SKIP_PM which makes libata skip PM commands for these devices. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata-pmp-prep: implement EH fast-fail pathTejun Heo
If PMP itself becomes inaccessible while trying to link a downstream link, spending time to recover the downstream link doesn't make any sense. Make EH skip retry and fail fast if -ERESTART is received. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata-pmp-prep: implement ATA_LFLAG_DISABLEDTejun Heo
Implement ATA_LFLAG_DISABLED. The flag indicates the link is disabled due to EH recovery failure. While a link is disabled, no EH action is taken on the link and suspend/resume become noop too. This will be used by PMP links to manage failed links. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata-pmp-prep: implement ATA_LFLAG_NO_RETRYTejun Heo
Some PMP links are connected to internal pseudo devices which may come and go depending on situation. There's no reason to try hard to recover them. ATA_LFLAG_NO_RETRY tells EH to not retry if the device attached to the link fails. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata-pmp-prep: implement ATA_LFLAG_NO_SRST, ASSUME_ATA and ASSUME_SEMBTejun Heo
Some links on some PMPs locks up on SRST and/or report incorrect device signature. Implement ATA_LFLAG_NO_SRST, ASSUME_ATA and ASSUME_SEMB to handle these quirky links. NO_SRST makes EH avoid SRST. ASSUME_ATA and SEMB forces class code to ATA and SEMB_UNSUP respectively. Note that SEMB isn't currently supported yet so the _UNSUP variant is used. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata-pmp-prep: implement qc_defer helpersTejun Heo
Implement ap->nr_active_links (the number of links with active qcs), ap->excl_link (pointer to link which can be used by ->qc_defer and is cleared when a qc with ATA_QCFLAG_CLEAR_EXCL completes), and ata_link_active(). These can be used by ->qc_defer() to implement proper command exclusion. This set of helpers seem enough for both sil24 (ATAPI exclusion needed) and cmd-switching PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata-pmp-prep: implement ops->qc_defer()Tejun Heo
Controllers which support PMP have various restrictions on which combinations of commands are allowed to what number of devices concurrently. This patch implements ops->qc_defer() which determines whether a qc can be issued at the moment or should be deferred. If the function returns ATA_DEFER_LINK, the qc will be deferred until a qc completes on the link. If ATA_DEFER_PORT, until a qc completes on any link. The defer conditions are advisory and in general ATA_DEFER_LINK can be considered as lower priority deferring than ATA_DEFER_PORT. ops->qc_defer() replaces fixed ata_scmd_need_defer(). For standard NCQ/non-NCQ exclusion, ata_std_qc_defer() is implemented. ahci and sata_sil24 are converted to use ata_std_qc_defer(). ops->qc_defer() is heavier than the original mechanism because full qc is prepped before determining to defer it, but various information is needed to determine defer conditinos and fully translating a qc is the only way to supply such information in generic manner. IMHO, this shouldn't cause any noticeable performance issues as * for most cases deferring occurs rarely (except for NCQ-aware cmd-switching PMP) * translation itself isn't that expensive * once deferred the command won't be repeated until another command completes which usually is a very long time cpu-wise. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata-pmp-prep: make a number of functions global to libataTejun Heo
Make a number of functions from libata-core.c and libata-eh.c global to libata (drivers/ata/libata.h). These will be used by PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata-pmp-prep: add @new_class to ata_dev_revalidate()Tejun Heo
Consider newly found class code while revalidating. PMP resetting always results in valid class code and issuing PMP commands to ATA/ATAPI device isn't very attractive. Add @new_class to ata_dev_revalidate() and check class code for revalidation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata-pmp-prep: add PMP related constants, fields, ops and update helpersTejun Heo
Add PMP related constants, fields and ops. Also, update ata_class_enabled/disabled() such that PMP classes are considered. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata: misc updates for ANTejun Heo
Update AN support in preparation of PMP support. * s/ata_id_has_AN/ata_id_has_atapi_AN/ * add AN enabled reporting during configuration * add err_mask to AN configuration failure reporting * update LOCKING comment for ata_scsi_media_change_notify() * check whether ATA dev is attached to SCSI dev ata_scsi_media_change_notify() * set ATA_FLAG_AN in ahci and sata_sil24 Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Kriten Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12[libata] SCSI: simulator version, not device version, belongs in VPDJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12[libata] SCSI: clean up R/W recovery mode pageJeff Garzik
Clear ARRE, we don't do auto-reallocation on reads, just on writes. Also, hardcode the size of the array using RW_RECOVERY_MPAGE_LEN, following the style of the surrounding code. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12[libata] SCSI: improve FORMAT UNIT; minor code cleanupsJeff Garzik
* SAT specifies that FORMAT UNIT should be translated into a series of READ and WRITE commands that zero the ATA device. That is far too cumbersome to bother with. Since we don't actually format the device, the old behavior of always returning success was inaccurate. Change FORMAT UNIT from returning success immediately (old behavior) to always returning an error (new behavior). * Add some comments around SYNCHRONIZE CACHE * Shuffle scsi command code around a bit, so that things are close to alphabetic order. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-12[libata] Slightly improved no-op REQUEST SENSE, SEND DIAGNOSTICJeff Garzik
A few pedantic apps care about missing or lame "mandatory" SCSI commands, so REQUEST SENSE -- as we autosense, R.S. just returns zeroes SEND DIAGNOSTIC -- our default (no-op) self-test succeeds, all other requests for testing fail. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12[libata] SCSI: support INQUIRY page 89h (ATA info page)Jeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12ahci: RAID mode SATA patch for Intel TolapaiJason Gaston
Signed-off-by: Jason Gaston <jason.d.gaston@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata: assume ATA_DEV_ATA on diagnostic failureTejun Heo
Certain device which reports diagnostic failure also reports invalid device signature. Assume ATA_DEV_ATA on diagnostic failure if reset indicates device presence. This is fix for bugzilla bug 8784. http://bugzilla.kernel.org/show_bug.cgi?id=8784 Signed-off-by: Tejun Heo <htejun@gmail.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Edward Amsden <amsden_linux@earthlink.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata: update ata_dev_try_classify() argumentsTejun Heo
Make ata_dev_try_classify() take a pointer to ata_device instead of ata_port/port_number combination for consistency and add @present argument. @present indicates whether the device seems present during reset. It's the result of TF access during softreset and link onlineness during hardreset. @present will be used to improve diagnostic failure handling. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12ahci: reimplement port_map handlingTejun Heo
Reimplement port_map handling such that 1. Non-zero PORTS_IMPL value is always examined and used if consistent with cap.n_ports. 2. When PI and cat.n_ports are inconsistent, honor cap.n_ports and force port_map to be ((1 << cap.n_ports) - 1). 3. There were two separate places dealing with port_map. Unify them to one. As all newer ahci chips seem to get PI correct and older ones usually have zero PI. Controllers with holes in PI are very unlikely to screw up PI, so #2 makes more sense than following inconsistent PI. Without this change, not setting ATA_FLAG_HONOR_PI when it's needed results in weird detection failure. This changed logic should be able to handle all known cases correctly automatically. Verified on ICH6 (reports 0 PI), ICH8 (with holes in port_map), ICH9, JMB360 and JMB363. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata: remiplement ata_hpa_resize()Tejun Heo
This patch reimplement ata_hpa_resize() such that... * All HPA related decisions are made inside ata_hpa_resize() proper. ata_hpa_resize() returns 0 if configuration can proceed, -errno if device needs to be reset and reconfigured. * All errors are handled properly. If HPA unlocking isn't requested, HPA handling is disabled automatically to avoid unnecessary device detection failure. * Messages are trimmed. HPA detection message is printed only during initial configuration. HPA unlocked message is printed only during initial configuration or unlocking results in different size. * Instead of using sectors returned in TF of SET_MAX, re-read IDENTIFY data as that's the value the device is going to use. * It's called early during ata_dev_configure() as IDENTIFY data might change after resizing. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata: clean up read/set native_max address functionsTejun Heo
Merge ata_read_native_max_addres_ext() into ata_read_native_max_address() and combine ata_set_native_max_address_ext() and ata_set_native_max_address() into ata_set_max_sectors(). * reduce duplicate code * return 0 or -errno depending on error conditions * report if command fails * use ATA_LBA instead of 0x40 This is in preparation of ata_hpa_resize() update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata: move ata_id_n_sectors() upwardTejun Heo
Move ata_id_n_sectors() upward right below ata_id_c_string(). This is to accomodate later changes. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12ata: increase allowed config flagsKristen Carlson Accardi
In anticipation of more features, increase number of config flags allowed, and move the init flags. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Cc: Hugh Dickens <hugh@veritas.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12ata_piix: replace spaces with tabsJason Gaston
This patch removes some incorrect formatting spaces and replaces them with tabs. Signed-off-by: Jason Gaston <jason.d.gaston@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata-scsi: convert to use the data buffer accessorsBoaz Harrosh
simple search-and-replace of direct scsi_cmnd access to use the data buffer accessors. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata-scsi: Remove !use_sg code pathsBoaz Harrosh
This is a minimal patch needed to remove use of !use_sg but it is not a complete clean up of the !use_sg paths. Libata-core still has the qc->flags & ATA_QCFLAG_SG and !qc->n_elem code paths. Perhaps an ata maintainer would have a go at it. - TODO: further cleanup of qc->flags & ATA_QCFLAG_SG and !qc->n_elem code paths in libata-core - TODO: Use scsi_dma_{map,unmap} where applicable. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12pdc2027x: Switch properly to ioread/iowriteAlan Cox
Some iomap functions were still using readl/writel and friends which happens to work on most platforms but is not correct. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata: Update experimental tags to reflect reality betterAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12[libata] blacklist Maxtor*BANC* using new wildcard blacklist matchingJeff Garzik
Support the use of '*' in model_num and model_rev entries in ata_device_blacklist[]. Based largely on David Milburn's "libata-core: support wildcard matching in ata_blacklist_entry" patch. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12[libata] ata_piix: Use more-robust form of array initializationJeff Garzik
Use a form of array init that is less fragile, less sensitive to trivial typos and ordering mismatches. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12AVR32 PATA driverKristoffer Nyborg Gregertsen
Updated and simplified driver. Use only register transfer timing for both data and register transfers. This gives poorer performance in PIO1 and 2, but should not be a problem in PIO3 and 4, correct me if I'm wrong :) The driver works very we'll but I still wonder about the interrupts. I have an interrupt line, that works nicely when POLLING flag is not set. The problem is the number of interrupts that eat away my CPU cycles. When using the POLLING flag there seem to be some interrupts that dosen't get cleared. Furthermore the device dosen't drive INTRQ high, it stays at 2.5 volts and generates a lot of interrupts due to ripple / noise. What to do? Signed-off-by: Kristoffer Nyborg Gregertsen <kngregertsen@norway.atmel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata driver for bf548 on chip ATAPI controller.Sonic Zhang
Fix all issues pointed out in Jeff's email. Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata: move EH repeat reporting into ata_eh_report()Tejun Heo
EH is sometimes repeated without any error or action. For example, this happens when probing IDENTIFY fails because of a phantom device. In these cases, all the repeated EH does is making sure there is no unhandled error or pending action and return. This repeation is necessary to avoid losing any event which occurred while EH was in progress. Unfortunately, this dry run causes annonying "EH pending after completion" message. This patch moves the repeat reporting into ata_eh_report() such that it's more compact and skipped on dry runs. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Mikael Pettersson <mikep@it.uu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-14 14:22:44 +0000