summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-08-12uio: provide vm access to UIO_MEM_PHYS mapsUwe Kleine-König
This makes it possible to let gdb access mappings of the process that is being debugged. uio_mmap_logical was moved and uio_vm_ops renamed to group related code and differentiate to new stuff. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12mm: make generic_access_phys available for modulesUwe Kleine-König
In the next commit this function will be used in the uio subsystem Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12mei: me: fix hardware reset flowTomas Winkler
Both H_IS and H_IE needs to be set to receive H_RDY interrupt 1. Assert H_IS to clear the interrupts during hw reset and use mei_me_reg_write instead of mei_hcsr_set as the later strips down the H_IS 2. fix interrupt disablement embarrassing typo hcsr |= ~H_IE -> hcsr &= ~H_IE; this will remove the unwanted interrupt on power down 3. remove useless debug print outs Cc: Shuah Khan <shuah.kh@samsung.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12FMC: Staticize local symbolsJingoo Han
This local symbol is used only in this file. Fix the following sparse warnings: drivers/fmc/fmc-write-eeprom.c:106:5: warning: symbol 'fwe_probe' was not declared. Should it be static? drivers/fmc/fmc-write-eeprom.c:147:5: warning: symbol 'fwe_remove' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12Tools: hv: use full nlmsghdr in netlink_sendOlaf Hering
There is no need to have a nlmsghdr pointer to another temporary buffer. Instead use a full struct nlmsghdr. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12Tools: hv: correct payload size in netlink_sendOlaf Hering
netlink_send is supposed to send just the cn_msg+hv_kvp_msg via netlink. Currently it sets an incorrect iovec size, as reported by valgrind. In the case of registering with the kernel the allocated buffer is large enough to hold nlmsghdr+cn_msg+hv_kvp_msg, no overrun happens. In the case of responding to the kernel the cn_msg is located in the middle of recv_buffer, after the nlmsghdr. Currently the code in netlink_send adds also the size of nlmsghdr to the payload. But nlmsghdr is a separate iovec. This leads to an (harmless) out-of-bounds access when the kernel processes the iovec. Correct the iovec size of the cn_msg to be just cn_msg + its payload. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-05Tools: hv: check return value of system in hv_kvp_daemonOlaf Hering
hv_kvp_daemon.c: In function 'main': hv_kvp_daemon.c:1441:8: warning: ignoring return value of 'daemon', declared with attribute warn_unused_result [-Wunused-result] Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-05Tools: hv: in kvp_set_ip_info free mac_addr right after usageOlaf Hering
... to simplify error path in upcoming changes. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-05Merge tag 'extcon-next-for-3.12' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next Chanwoo writes: Update extcon for 3.12 This patchset add new file for OF helper API and modify small fix of extcon-palmas driver. Also, extcon core dirver use power_efficient_wq instead of system_wq. Detailed description for patchset: 1. Add new file for OF helper API - Add OF(OpenFirmware) Helper API which is of_extcon_get_extcon_device(). This helper API get the extcon device name on extcon consumer device. - Add usase case about OF helper API of extcon in dwc3-omap.c. dwc3-omap driver use extcon subsystem to detect the state of USB/USB-Host cable so dwc3-omap call of_extcon_get_extcon_device() to need extcon device name. 2. Modify extcon-palmas.c driver - Provide option to select whether interrupt is used or not - Support suspend/resume for palmas driver - Update palmas interrupt register to detect ID pin - Code clean to remove unused data - Rename filename for device tree binding (extcon-twl.txt -> extcon-palmas.txt) 3. Use power_effcient_wq on extcon core driver/extcon-arizona instead of system_wq - extcon core driver(extcon-gpio.c/extcon-adc-jack.c) use power_effcient_wq instead of system_wq.
2013-08-05extcon: adc-jack: Use power efficient workqueueMark Brown
The debounce timeout is generally quite long and the work not performance critical so allow the scheduler to run the work anywhere rather than in the normal per-CPU workqueue. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-08-05extcon: gpio: Use power efficient workqueue for debounceMark Brown
The debounce timeout is generally quite long and the work not performance critical so allow the scheduler to run the work anywhere rather than in the normal per-CPU workqueue. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-08-05extcon: arizona: Use power efficient workqueueMark Brown
None of the delayed work the driver schedules has particularly short delays and it is not performance sensitive so let the scheduler run it wherever is most efficient rather than in a per CPU workqueue by using the system power efficient workqueue. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-08-05extcon: palmas: Option to disable ID/VBUS detection based on platformLaxman Dewangan
Based on system design, platform needs to detect the VBUS or ID or both. Provide option to select this through platform data to disable part of cable detection through palmas-usb. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-08-05extcon: palams: add support for suspend/resumeLaxman Dewangan
Add suspend/resume callbacks and support for wakeup from suspend on USB HOST or USB Device cable insertion or removal. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-08-05extcon: palmas: enable ID_GND and ID_FLOAT detection alwaysLaxman Dewangan
When integrating driver with Tegra platform, it is found that the ID pins get detected only once after booting system and further removal and re-insert does not detect the ID pin. Fixing this issue with enabling interrupt on ID_GND and ID_FLOAT always and clearing the status on LATCH register which actually occurred. Also if interrupt occurs with line status as zero then based on previous status, set the cable state. Add debug prints to display the cable state when any cable insertion/removal happen. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-08-05extcon: palmas: remove unused member from palams_usb structureLaxman Dewangan
Remove unused member vbus_enable and set_vbus_work from palmas_usb as these members are not used in drivers. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-08-05extcon: palmas: devicetree: remove non-require property detailsLaxman Dewangan
Extcon for palma driver does not need vbus supply and hence removing this from devicetree document/bindings. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-08-05extcon: palmas: rename device tree binding matching with file nameLaxman Dewangan
The driver name is extcon/extcon-palmas.c and hence renaming the device tree binding document to extcon-palmas.txt. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-08-05extcon: palmas: remove assigning "edev.name" to palmasKishon Vijay Abraham I
of_extcon_get_extcon_dev() uses dev_name for getting the reference to the extcon device. If the extcon driver assigns a different name other than dev_name, of_extcon_get_extcon_dev() wouldn't be able to find the reference to the extcon device. Since the client drivers of extcon-palmas would be using of_extcon_get_extcon_dev(), removed assigning edev.name in extcon-palmas. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-08-05usb: dwc3: use extcon fwrk to receive connect/disconnectKishon Vijay Abraham I
Modified dwc3-omap to receive connect and disconnect notification using extcon framework. Also did the necessary cleanups required after adapting to extcon framework. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2013-08-05extcon: Add an API to get extcon device from dt nodeKishon Vijay Abraham I
Added an API of_extcon_get_extcon_dev() to be used by drivers to get extcon device in the case of dt boot (this can be used instead of extcon_get_extcon_dev()). Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-08-02Tools: hv: check return value of daemon to fix compiler warning.Olaf Hering
hv_kvp_daemon.c: In function 'main': hv_kvp_daemon.c:1441:8: warning: ignoring return value of 'daemon', declared with attribute warn_unused_result [-Wunused-result] Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-02Tools: hv: fix send/recv buffer allocationOlaf Hering
hv_kvp_daemon fails to start in current openSuSE 13.1 snapshots because the kvp_send_buffer is too small to hold cn_msg+hv_kvp_msg, the very first sendmsg returns with EFAULT. In addition it fixes the Network info tab in Windows Server 2012R2 in SLES11. Adjust the code in kvp and vss daemon to allocate the needed buffers at runtime. To keep the code simple, the buffer_len includes also the nlmsghdr, although only the recv_buffer needs this extra space. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-02Drivers: hv: remove HV_DRV_VERSIONOlaf Hering
Remove HV_DRV_VERSION, it has no meaning for upstream drivers. Initially it was supposed to show the "Linux Integration Services" version, now it is not in sync anymore with the out-of-tree drivers available from the MSFT website. The only place where a version string is still required is the KVP command "IntegrationServicesVersion" which is handled by tools/hv/hv_kvp_daemon.c. To satisfy such KVP request from the host pass the current string to the daemon during KVP userland registration. Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-29Merge 3.11-rc3 into char-misc-next.Greg Kroah-Hartman
This resolves a merge issue with: drivers/misc/mei/init.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28Linux 3.11-rc3v3.11-rc3Linus Torvalds
2013-07-28Merge tag 'pinctrl-for-v3.11-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: - Driver fixes for AM33xx, SIRF and PFC pin controllers - Fix a compile warning from the pinctrl single-register driver - Fix a little nasty memory leak * tag 'pinctrl-for-v3.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: fix a memleak when freeing maps pinctrl: pinctrl-single: fix compile warning when no CONFIG_PM pinctrl: sh-pfc: fix SDHI0 VccQ regulator on sh73a0 with DT arm/dts: sirf: fix the pingroup name mismatch between drivers and dts pinctrl: sirf: add usp0_uart_nostreamctrl pin group for usp-uart without flowctrl pinctrl: sirf: fix the pin number and mux bit for usp0 pinctrl: am33xx dt binding: correct include path
2013-07-28Merge tag 'trace-fixes-3.11-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Oleg is working on fixing a very tight race between opening a event file and deleting that event at the same time (both must be done as root). I also found a bug while testing Oleg's patches which has to do with a race with kprobes using the function tracer. There's also a deadlock fix that was introduced with the previous fixes" * tag 'trace-fixes-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Remove locking trace_types_lock from tracing_reset_all_online_cpus() ftrace: Add check for NULL regs if ops has SAVE_REGS set tracing: Kill trace_cpu struct/members tracing: Change tracing_fops/snapshot_fops to rely on tracing_get_cpu() tracing: Change tracing_entries_fops to rely on tracing_get_cpu() tracing: Change tracing_stats_fops to rely on tracing_get_cpu() tracing: Change tracing_buffers_fops to rely on tracing_get_cpu() tracing: Change tracing_pipe_fops() to rely on tracing_get_cpu() tracing: Introduce trace_create_cpu_file() and tracing_get_cpu()
2013-07-28Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is five bug fixes, two of which fix long standing problems causing crashes (sd and mvsas). The remaining three are hung (isci race) or lost (qla2xxx, isci) devices" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] isci: fix breakage caused by >16byte CDB patch [SCSI] mvsas: Fix kernel panic on tile due to unaligned data access [SCSI] sd: fix crash when UA received on DIF enabled device [SCSI] qla2xxx: Properly set the tagging for commands. [SCSI] isci: Fix a race condition in the SSP task management path
2013-07-26pcmcia: synclink_cs: replace sum of bitmasks with OR operation.Alexandru Juncu
Suggested by coccinelle and manually verified. Signed-off-by: Alexandru Juncu <alexj@rosedu.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-26uio: Remove uio_pdrv and use uio_pdrv_genirq insteadMichal Simek
The patch "UIO: fix uio_pdrv_genirq with device tree but no interrupt" (sha1: e3a3c3a205554e564751cd9c0276b2af813d7a92) add support to use this driver with no interrupts. uio_pdrv_genirq also supports device-tree binding which is not available in uio_pdrv. That's why this uio_pdrv driver can be just removed. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Vitalii Demianets <vitas@nppfactor.kiev.ua> Reviewed-by: Pavel Machek <pavel@denx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-26mei: don't get stuck in select during resetTomas Winkler
Clear pending connection after hw reset but before hw start and wake up the waiting task in poll. Signal POLLERR in select when device went through reset. Add wrapper mei_cl_is_connected for checking if the device and client are connected. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-26Drivers: hv: balloon: Initialize the transaction ID just before sending the ↵K. Y. Srinivasan
packet Each message sent from the guest carries with it a transaction ID. Assign the transaction ID just before putting the message on the VMBUS. This would help in debugging on the host side. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-26Drivers: hv: util: Fix a bug in version negotiation code for util servicesK. Y. Srinivasan
The current code picked the highest version advertised by the host. WS2012 R2 has implemented a protocol version for KVP that is not compatible with prior protocol versions of KVP. Fix the bug in the current code by explicitly specifying the protocol version that the guest can support. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-26tools: hv: Check return value of setsockopt callTomas Hozza
Check return value of setsockopt call and if it fails print error to the system log and exit with non-zero value. Signed-off-by: Tomas Hozza <thozza@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-26tools: hv: Check return value of poll callTomas Hozza
Check return value of poll call and if it fails print error to the system log. If errno is EINVAL then exit with non-zero value otherwise continue the while loop and call poll again. Signed-off-by: Tomas Hozza <thozza@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-26tools: hv: Improve error logging in VSS daemon.Tomas Hozza
Use errno and strerror() when logging errors to provide more information. Signed-off-by: Tomas Hozza <thozza@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-26Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "This is just a regular fixes pull apart from the qxl one, it has radeon and intel bits in it, The intel fixes are for a regression with the RC6 fix and a 3.10 hdmi regression, whereas radeon is more DPM fixes, a few lockup fixes and some rn50/r100 DAC fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/dpm: fix r600_enable_sclk_control() drm/radeon/dpm: implement force performance levels for rv6xx drm/radeon/dpm: fix displaygap programming on rv6xx drm/radeon/dpm: fix a typo in the rv6xx mclk setup drm/i915: initialize gt_lock early with other spin locks drm/i915: fix hdmi portclock limits drm/radeon: fix combios tables on older cards drm/radeon: improve dac adjust heuristics for legacy pdac drm/radeon: Another card with wrong primary dac adj drm/radeon: fix endian issues with DP handling (v3) drm/radeon/vm: only align the pt base to 32k drm/radeon: wait for 3D idle before using CP DMA
2013-07-26Merge branch 'qxl-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull qxl drm fixes from Dave Airlie: "Okay as I warned, the qxl driver was running a bit free and loose with its ttm object reservations and the new lockdep enabled reservation tracking shone a bright light into it, it also with the new reservations mutexes hits a possible deadlock during boot. The first patch is a real fix to render the console correctly as the driver used to just drop irq renderering as too hard, this also fixes a sleeping while atomic warning. The other two patches are the big ugly ones that redo how the driver allocates objects and reserves them and makes things all work properly, I've tested this in a VM, and compared to the current code which hits a lockdep warning and the sleep while atomic warning before failing. So sorry this is coming in late, I should have tested qxl before merging the mutex code, but I'd rather just fix qxl with this than revert the reservations code at this point" * 'qxl-fixes' of git://people.freedesktop.org/~airlied/linux: qxl: convert qxl driver to proper use for reservations qxl: allow creation of pre-pinned objects and use for releases. drm/qxl: add delayed fb operations
2013-07-26Merge tag 'pm+acpi-3.11-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: "These are just two fixes, a revert of the would-be backlight fix that didn't work and an intel_pstate fix for two problems related to maximum P-state selection. Specifics: - Revert of the ACPI video commit that I hoped would help fix backlight problems related to Windows 8 compatibility on some systems. Unfortunately, it turned out to cause problems to happen too. - Fix for two problems in intel_pstate, a possible failure to respond to a load change on a quiet system and a possible failure to select the highest available P-state on some systems. From Dirk Brandewie" * tag 'pm+acpi-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPI / video / i915: No ACPI backlight if firmware expects Windows 8" cpufreq / intel_pstate: Change to scale off of max P-state
2013-07-26Merge tag 'arm64-stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull arm64 fixes from Catalin Marinas: - Stack size increased to 16K (similar to other 64-bit architectures) - Additional cache flushing for secondary CPUs boot mode * tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: Change kernel stack size to 16K arm64: Fix definition of arm_pm_restart to match the declaration arm64: virt: ensure visibility of __boot_cpu_mode
2013-07-26Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "This is a largeish batch of fixes, mostly because I missed -rc2 due to travel/vacation. So in number these are a bit more than ideal unless you amortize them over two -rcs. Quick breakdown: - Defconfig updates - Making multi_v7_defconfig useful on more hardware to encourage single-image usage - Davinci and nomadik updates due to new code merged this merge window - Fixes for UART on Samsung platforms, both PM and clock-related - A handful of warning fixes from defconfig builds, including for max8925 backlight and pxamci (both with appropriate acks) - Exynos5440 fixes for LPAE configuration, PM - ...plus a bunch of other smaller changes all over the place I expect to switch to regressions-or-severe-bugs-only fixes from here on out" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits) mfd: max8925: fix dt code for backlight ARM: omap5: Only select errata 798181 if SMP ARM: EXYNOS: Update CONFIG_ARCH_NR_GPIO for Exynos ARM: EXYNOS: Fix low level debug support ARM: SAMSUNG: Save/restore only selected uart's registers ARM: SAMSUNG: Add SAMSUNG_PM config option to select pm ARM: S3C24XX: Add missing clkdev entries for s3c2440 UART ARM: multi_v7_defconfig: Select USB chipidea driver ARM: pxa: propagate errors from regulator_enable() to pxamci ARM: zynq: fix compilation warning ARM: keystone: fix compilation warning ARM: highbank: Only touch common coherency control register fields ARM: footbridge: fix overlapping PCI mappings dmaengine: shdma: fix a build failure on platforms with no DMA support ARM: STi: Set correct ARM ERRATAs. ARM: dts: STi: Fix pinconf setup for STiH416 serial2 ARM: nomadik: configure for NO_HZ and HRTIMERS ARM: nomadik: update defconfig base ARM: nomadik: Update MMC defconfigs ARM: davinci: defconfig: enable EDMA driver ...
2013-07-26Merge tag 'usb-3.11-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of USB fixes for 3.11-rc3. Lots of little things, nothing major. A number of new device ids, build fixes for DMA, and a bunch of other minor things. All of these have been in the linux-next tree" * tag 'usb-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits) usb: Clear both buffers when clearing a control transfer TT buffer. usb/gadget: free opts struct on error recovery USB: mos7840: fix memory leak in open usb: serial: option.c: remove ONDA MT825UP product ID fromdriver usb: serial: option: add Olivetti Olicard 200 usb: serial: option: blacklist ONDA MT689DC QMI interface xhci: fix null pointer dereference on ring_doorbell_for_active_rings usb: host: xhci: Enable XHCI_SPURIOUS_SUCCESS for all controllers with xhci 1.0 usb: fix build warning in pci-quirks.h when CONFIG_PCI is not enabled usb: xhci: Mark two functions __maybe_unused xhci: Avoid NULL pointer deref when host dies. usb: serial: option: Add ONYX 3G device support USB: ti_usb_3410_5052: fix dynamic-id matching usb: option: add TP-LINK MA260 USB: option: add D-Link DWM-152/C1 and DWM-156/C1 USB: EHCI: Fix resume signalling on remote wakeup USB: cp210x: add MMB and PI ZigBee USB Device Support usb: cp210x support SEL C662 Vendor/Device USB: option: append Petatel NP10T device to GSM modems list USB: misc: Add Manhattan Hi-Speed USB DVI Converter to sisusbvga ...
2013-07-26Merge tag 'tty-3.11-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are 3 fixes for TTY and serial issues that have been reported. Nothing huge, but nice to get fixed" * tag 'tty-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: tegra: correct help message in Kconfig from 'ttyHS' to 'ttyTHS' tty/8250_early: Don't truncate last character of options TTY: snyclinkmp: calculating wrong addresses
2013-07-26Merge tag 'staging-3.11-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging fixes from Greg KH: "Here are some tiny drivers/staging/ fixes for 3.11-rc3 A number of bugfixes, all pretty tiny, but resolve issues that have been reported (the kstrtos32 change fixes a data corruption problem that Dan found). And a MAINTAINERS file update for the comedi drivers" * tag 'staging-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: MAINTAINERS: Update the list of maintainers for staging/comedi driver. staging: tidspbridge: replace strict_strtol() with kstrtos32() staging: android: logger: Correct write offset reset on error staging: zram: protect zram_reset_device() call staging: gdm72xx: potential use after free in send_qos_list() staging: drm/imx: drop "select OF_VIDEOMODE" staging: frontier: use after free in disconnect() staging: comedi: fix a race between do_cmd_ioctl() and read/write staging: comedi: COMEDI_CANCEL ioctl should wake up read/write
2013-07-26Merge tag 'char-misc-3.11-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc patches from Greg KH: "Here are some char/misc patches for 3.11-rc3. It's pretty much just: - mei fixes - hyperv fixes - new ja_JP translation update all tiny stuff, but fixes for issues people have reported." * tag 'char-misc-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: HOWTO ja_JP sync mei: me: fix waiting for hw ready mei: don't have to clean the state on power up mei: me: fix reset state machine mei: hbm: fix typo in error message Tools: hv: KVP: Fix a bug in IPV6 subnet enumeration Drivers: hv: balloon: Do not post pressure status if interrupted Drivers: hv: balloon: Fix a bug in the hot-add code Drivers: hv: vmbus: incorrect device name is printed when child device is unregistered
2013-07-26Merge tag 'sound-3.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Just a handful of regression and small fixes in ASoC, HD-audio and USB-audio drivers. - Sigmetal HD-audio codec regression fixes - A copule of XRUN indication fixes for usb-audio devices - ASoC: ep93xx build fix, sgtl5000 fix for probe order changes, max98088 register access fix, etc" * tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hiface: return correct XRUN indication ASoC: tegra: correct playback_dma_data setup ASoC: core: double free in snd_soc_add_platform() ALSA: usb-audio: 6fire: return correct XRUN indication ASoC: ep93xx: fix build of ep93xx-ac97.c ALSA: hda - Remove NO_PRESENCE bit override for Dell 1420n Laptop ALSA: hda - Fix EAPD GPIO control for Sigmatel codecs ASoC: atmel-ssc: remove clk_disable_unprepare call from critical section ASoC: sgtl5000: defer the probe if clock is not found ASoC: max98088 - fix element type of the register cache.
2013-07-26Merge tag 'for-linus-v3.11-rc3' of git://oss.sgi.com/xfs/xfsLinus Torvalds
Pull xfs fix from Ben Myers: "Fix for regression in commit cca9f93a52d2 ("xfs: don't do IO when creating an new inode"), recovery causing filesystem corruption after a crash" * tag 'for-linus-v3.11-rc3' of git://oss.sgi.com/xfs/xfs: xfs: di_flushiter considered harmful
2013-07-26Merge branch 'for-3.11' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd fix from Bruce Fields: "One more nfsd bugfix for 3.11" * 'for-3.11' of git://linux-nfs.org/~bfields/linux: nfsd: nfsd_open: when dentry_open returns an error do not propagate as struct file
2013-07-26Merge tag 'md/3.11-fixes' of git://neil.brown.name/mdLinus Torvalds
Pull md fixes from Neil Brown: "Two more bugfixes for md in 3.11 Both marked for -stable, both since 3.3. I guess I should spend more time testing..." * tag 'md/3.11-fixes' of git://neil.brown.name/md: md/raid5: fix interaction of 'replace' and 'recovery'. md/raid10: remove use-after-free bug.
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-10 07:24:46 +0000