summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-08-09usb: musb: dsps: remove the hardcoded phy piecesSebastian Andrzej Siewior
dsps uses a nop driver which is added in dsps itself and does the PHY on/off calls within dsps. Since those calls are now moved the nop driver itself, we can now request the phy proper phy and remove those calls. Currently only the first musb interface is used so we only add one phy node for now. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-09usb: phy: Add AM335x PHY driverSebastian Andrzej Siewior
This driver is a redo of my earlier attempt. It uses parts of the generic PHY driver and uses the new control driver for the register the phy needs to power on/off the phy. It also enables easy access for the wakeup register which is not yet implemented. The difference between the omap attempt is: - no static holding variable - one global visible function which exports a struct with callbacks to access the "control" registers. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-09usb: phy: phy-generic: export init functionsSebastian Andrzej Siewior
This patch exports the mostly generic functions so they can be used from other phy driver instead of duplicating the code. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-09Merge branch 'nop-phy-rename' into nextFelipe Balbi
Signed-off-by: Felipe Balbi <balbi@ti.com> Conflicts: drivers/usb/phy/phy-generic.c
2013-08-09usb: phy: rename nop_usb_xceiv => usb_phy_gen_xceivSebastian Andrzej Siewior
The "nop" driver isn't a do-nothing-stub but supports a couple functions like clock on/off or is able to use a voltage regulator. This patch simply renames the driver to "generic" since it is easy possible to extend it by a simple function istead of writing a complete driver. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-09usb: phy: mv-usb: remove incorrect __exit_p annotationJingoo Han
When platform_driver_probe() is not used, bind/unbind via sysfs is enabled. Thus, __exit_p annotation should be removed from remove(). Also, mv_otg_remove() is staticized, because this function is used only in this file. Fix the following sparse warning: drivers/usb/phy/phy-mv-usb.c:656:5: warning: symbol 'mv_otg_remove' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-09usb: phy: mv-u3d: Staticize mv_u3d_phy_shutdown()Jingoo Han
mv_u3d_phy_shutdown() is used only in this file. Fix the following sparse warning: drivers/usb/phy/phy-mv-u3d-usb.c:85:6: warning: symbol 'mv_u3d_phy_shutdown' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-09usb: gadget: f_uac1: Staticize local functionsJingoo Han
control_selector_init() is used only in this file. audio_bind_config() is used only in audio.c file to which f_uac1.c is included. Thus, these functions are staticized to fix the following warnings. drivers/usb/gadget/f_uac1.c:698:12: warning: symbol 'control_selector_init' was not declared. Should it be static? drivers/usb/gadget/f_uac1.c:722:12: warning: symbol 'audio_bind_config' was not declared. Should it be static? Acked-by: Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-09usb: gadget: u_uac1: add __user annotationJingoo Han
Added __user annotation to fix the following sparse warning. drivers/usb/gadget/u_uac1.c:194:52: warning: incorrect type in argument 2 (different address spaces) drivers/usb/gadget/u_uac1.c:194:52: expected void const [noderef] <asn:1>*buf drivers/usb/gadget/u_uac1.c:194:52: got void *buf Acked-by: Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-09usb: gadget: rndis: Staticize rndis_init()/rndis_exit()Jingoo Han
rndis_init() and rndis_exit() are used only in this file. Fix the following sparse warnings: drivers/usb/gadget/rndis.c:1145:5: warning: symbol 'rndis_init' was not declared. Should it be static? drivers/usb/gadget/rndis.c:1179:6: warning: symbol 'rndis_exit' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-09usb: gadget: f_mass_storage: use NULL instead of 0Jingoo Han
The local variables such as 'filename', 'vendor_name', and 'product_name' are pointers; thus, use NULL instead of 0 to fix the following sparse warnings drivers/usb/gadget/f_mass_storage.c:3046:27: warning: Using plain integer as NULL pointer drivers/usb/gadget/f_mass_storage.c:3050:28: warning: Using plain integer as NULL pointer drivers/usb/gadget/f_mass_storage.c:3051:29: warning: Using plain integer as NULL pointer Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-09usb: gadget: amd5536udc: unconditionally use GFP_ATOMIC in udc_queue()Alexey Khoroshilov
As far as prep_dma() is called with spinlock held, we have to pass GFP_ATOMIC regardless of gfp argument. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-02usb: gadget: at91_udc: add usb_clk for transition to common clk frameworkBoris BREZILLON
The AT91 PMC (Power Management Controller) provides an USB clock used by USB Full Speed host (ohci) and USB Full Speed device (udc). The usb drivers (ohci and udc) must configure this clock to 48Mhz. This configuration was formely done in mach-at91/clock.c, but this implementation will be removed when moving to common clk framework. This patch adds support for usb clock retrieval and configuration, and is backward compatible with the current at91 clk implementation (if usb clk is not found, it does not configure/enable it). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-02usb: gadget: at91_udc: add missing clk_put on fclk and iclkBoris BREZILLON
This patch adds missing clk_put on fclk and iclk in case the probe function fails after these clocks have been retrieved. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-02usb: gadget: fusb300_udc: Staticize fusb300_rdcxf()Jingoo Han
fusb300_rdcxf() used only in this file. Fix the following sparse warning: drivers/usb/gadget/fusb300_udc.c:560:6: warning: symbol 'fusb300_rdcxf' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-02usb: gadget: goku_udc: use NULL instead of 0Jingoo Han
'req' is a pointer; thus, use NULL instead of 0 to fix the following sparse warning: drivers/usb/gadget/goku_udc.c:775:13: warning: Using plain integer as NULL pointer Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-02usb: dwc3: pci: add CONFIG_PM_SLEEP to suspend/resume functionsJingoo Han
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SET_SYSTEM_SLEEP_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. Unnecessary CONFIG_PM ifdefs are removed. drivers/usb/dwc3/dwc3-pci.c:215:12: warning: 'dwc3_pci_suspend' defined but not used [-Wunused-function] drivers/usb/dwc3/dwc3-pci.c:224:12: warning: 'dwc3_pci_resume' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-31usb: dwc3: use dev_get_platdata()Felipe Balbi
Use the wrapper function for retrieving the platform_data instead of accessing dev->platform_data directly. While at that also make change 'node' initialization to use the dev pointer. Inspired-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-30usb: renesas: use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-30usb: musb: use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-30usb: phy: use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-30usb: gadget: use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-30usb: tegra: Fix typo in tegra20-usb-phy documentationMikko Perttunen
The device tree binding documentation for tegra20-usb-phy used to claim that the vbus-supply property is required for host phys and optional for otg phys. This should be the other way around. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-30usb: of: fix build breakage caused by recent patchesFelipe Balbi
commit 052a11d (usb: phy: make PHY driver selection possible by controller drivers) changed the rules on how drivers/usb/phy/of.c would be compiled and failed to update include/linux/usb/of.h accordingly. Because of that, we can fall into situations where of_usb_get_phy_mode() is redefined. In order to fix the error, we update the IS_ENABLED() check in include/linux/usb/of.h to reflect the condition where of.c is built. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: dwc3: core: modify IO memory resource after deferred probe completesIvan T. Ivanov
When deferred probe happens driver will try to ioremap multiple times and will fail. Memory resource.start variable is a global variable, modifications in this field will be accumulated on every probe. Fix this by moving the above operations after driver hold all required PHY's. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: phy: tegra: Use switch instead of if-elseTuomas Tynkkynen
Use switch() instead of if-else when checking for the PHY type. Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: musb: dsps: remove EOI accessSebastian Andrzej Siewior
The EOI register is not present in the AM335x memory space according to the TRM and thus removed. Should any platform using the EOI register get merged then it may be used again if the register address is not zero. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: musb: dsps: rename ti81xx_driver_data to am33xx_driver_dataSebastian Andrzej Siewior
The ti81xx platform is not fully supported right now. This patch renames the date structure to a am33xx prefix which is actually used. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: phy: tegra: Use DT helpers for dr_modeTuomas Tynkkynen
Use the new of_usb_get_dr_mode helper function for parsing dr_mode from the device tree. Also replace the usage of the custom tegra_usb_phy_mode enum with the standard enum. Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: phy: tegra: Use DT helpers for phy_typeTuomas Tynkkynen
Use the new of_usb_get_phy_mode helper function for parsing phy_type from the device tree. Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: phy: tegra: Remove custom PHY locating APIsTuomas Tynkkynen
The Tegra EHCI driver is no longer using these custom functions, so they can be removed. Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: host: tegra: Locate a PHY via standard APITuomas Tynkkynen
Use devm_get_phy_by_phandle to get a PHY device instead of the custom Tegra functions. Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: phy: tegra: Register as an USB PHY.Tuomas Tynkkynen
Register the Tegra PHY device instances with the PHY subsystem so that the Tegra EHCI driver can locate a PHY via the standard APIs. Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29ARM: tegra: Remove USB platform dataTuomas Tynkkynen
USB-related platform data is not used anymore in the Tegra USB drivers, so remove all of it. Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: tegra: host: Remove references to plat dataTuomas Tynkkynen
Platform data is not used in tegra-ehci anymore, so remove all references to it. Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: host: tegra: Remove leftover codeTuomas Tynkkynen
ehci-tegra calls devm_usb_get_phy, which will never succeed since the Tegra PHY does not register itself with the PHY subsystem. It is also completely redundant since the code has already located a PHY via an internal API. Call otg_set_host unconditionally to simplify the code since it should be safe to do so. Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: phy: tegra: Remove unnecessary 'dev' fieldTuomas Tynkkynen
struct usb_phy already has a field for the device pointer, so this unnecessary field can be removed. Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29arm: tegra: Remove obsolete nvidia,vbus-gpio propertiesMikko Perttunen
USB VBUS regulators are now specified with the vbus-supply property instead of nvidia,vbus-gpio, so remove the obsolete properties. The equivalent vbus-supply properties were already added in patch "ARM: tegra: update device trees for USB binding rework". Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: tegra: Add vbus-supply property for host mode PHYsMikko Perttunen
Document vbus-supply as an optional property for host mode phy-tegra-usb PHYs. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: tegra: Use regulators instead of GPIOs for USB PHY VBUSMikko Perttunen
The tegra ehci driver has enabled USB vbus regulators directly using GPIOs and the device tree attribute nvidia,vbus-gpio. This is ugly and causes error messages on boot when both the regulator driver and the ehci driver want access to the same GPIO. After this patch, usb vbus regulators for tegra usb phy devices are specified with the device tree attribute vbus-supply = <&x> where x is a regulator defined in the device tree. The old nvidia,vbus-gpio property is no longer supported. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: phy: tegra: Read UTMIP parameters from device treeMikko Perttunen
UTMIP parameters used to be hardcoded into tables in the PHY driver. This patch reads them from the device tree instead in accordance with the phy-tegra-usb DT documentation. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29arm: dts: tegra20: Rename USB UTMI parameters according to new definitionsMikko Perttunen
This patch changes the Tegra20 USB PHY nodes to use the UTMI configuration parameter names as specified in the device tree binding documentation after patch "ARM: tegra: finalize USB EHCI and PHY bindings". Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: musb: do not change dev's dma_maskSebastian Andrzej Siewior
Commit 8d2421e ("usb: musb: kill global and static for multi instance") removed the global dma_mask copy and replaced by parent's DMA mask. The problem here is that if the parent does not have a dma_mask then musb_remove() goes kaboom. Instead trying to fix this I was thinking we do we need to erase dma_mask in the first place? Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: musb: remove ti81xx pieces from musbSebastian Andrzej Siewior
ti81xx does not have a baseport mainline i.e. it should not boot. The amount of rework that is required makes it easier to simply remove that platform (i.e. that possible platform device) and add it later once it comes back with DT support. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: musb: dsps: init / shutdown the phySebastian Andrzej Siewior
If the init / shutdown function of the phy moves out of dsps into the phy driver, then dsps needs to call the callbacks of the phy driver to ensure that this happens. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: phy: don't check resource with devm_ioremap_resourceWolfram Sang
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: gadget: atmel_usba: prepare clk before calling enableBoris BREZILLON
Replace clk_enable/disable with clk_prepare_enable/disable_unprepare to avoid common clk framework warnings. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: renesas_usbhs: tidyup original usbhsx_for_each_xxx macroKuninori Morimoto
Current usbhsx_for_each_xxx macro will read out-of-array's memory after last loop operation. It was not good C language operation, and the binary which was compiled by (at least) gcc 4.8.1 is broken This patch tidyup these issues Reported-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Reviewed-by: Takashi Yoshii <takashi.yoshii.zj@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: phy: omap-usb3: Improve DPLL parameter lookup codeRoger Quadros
Use a mapping table (dpll_map) to match the possible system clock rates to the appropriate DPLL parameters. Introduce a function "omap_usb3_get_dpll_params()" that will return the matching DPLL parameters for the given clock rate. Also, bail out on phy init if DPLL locking fails. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: ehci-omap: select NOP_USB_XCEIV PHY driverRoger Quadros
ehci-omap needs NOP_USB_XCEIV PHY driver to function properly, so select it. As the USB PHY drivers no longer depend on USB_PHY, it is safe to select the PHY drivers. Signed-off-by: Roger Quadros <rogerq@ti.com> Tested-by: Adrien Vergé <adrienverge@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-21 06:44:38 +0000