summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-07-25Linux 4.9.115v4.9.115Greg Kroah-Hartman
2018-07-25block: do not use interruptible wait anywhereAlan Jenkins
commit 1dc3039bc87ae7d19a990c3ee71cfd8a9068f428 upstream. When blk_queue_enter() waits for a queue to unfreeze, or unset the PREEMPT_ONLY flag, do not allow it to be interrupted by a signal. The PREEMPT_ONLY flag was introduced later in commit 3a0a529971ec ("block, scsi: Make SCSI quiesce and resume work reliably"). Note the SCSI device is resumed asynchronously, i.e. after un-freezing userspace tasks. So that commit exposed the bug as a regression in v4.15. A mysterious SIGBUS (or -EIO) sometimes happened during the time the device was being resumed. Most frequently, there was no kernel log message, and we saw Xorg or Xwayland killed by SIGBUS.[1] [1] E.g. https://bugzilla.redhat.com/show_bug.cgi?id=1553979 Without this fix, I get an IO error in this test: # dd if=/dev/sda of=/dev/null iflag=direct & \ while killall -SIGUSR1 dd; do sleep 0.1; done & \ echo mem > /sys/power/state ; \ sleep 5; killall dd # stop after 5 seconds The interruptible wait was added to blk_queue_enter in commit 3ef28e83ab15 ("block: generic request_queue reference counting"). Before then, the interruptible wait was only in blk-mq, but I don't think it could ever have been correct. Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: stable@vger.kernel.org Signed-off-by: Alan Jenkins <alan.christopher.jenkins@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25xprtrdma: Return -ENOBUFS when no pages are availableChuck Lever
commit a8f688ec437dc2045cc8f0c89fe877d5803850da upstream. The use of -EAGAIN in rpcrdma_convert_iovs() is a latent bug: the transport never calls xprt_write_space() when more pages become available. -ENOBUFS will trigger the correct "delay briefly and call again" logic. Fixes: 7a89f9c626e3 ("xprtrdma: Honor ->send_request API contract") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: stable@vger.kernel.org # 4.8+ Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25xhci: Fix perceived dead host due to runtime suspend race with event handlerMathias Nyman
commit 229bc19fd7aca4f37964af06e3583c1c8f36b5d6 upstream. Don't rely on event interrupt (EINT) bit alone to detect pending port change in resume. If no change event is detected the host may be suspended again, oterwise roothubs are resumed. There is a lag in xHC setting EINT. If we don't notice the pending change in resume, and the controller is runtime suspeded again, it causes the event handler to assume host is dead as it will fail to read xHC registers once PCI puts the controller to D3 state. [ 268.520969] xhci_hcd: xhci_resume: starting port polling. [ 268.520985] xhci_hcd: xhci_hub_status_data: stopping port polling. [ 268.521030] xhci_hcd: xhci_suspend: stopping port polling. [ 268.521040] xhci_hcd: // Setting command ring address to 0x349bd001 [ 268.521139] xhci_hcd: Port Status Change Event for port 3 [ 268.521149] xhci_hcd: resume root hub [ 268.521163] xhci_hcd: port resume event for port 3 [ 268.521168] xhci_hcd: xHC is not running. [ 268.521174] xhci_hcd: handle_port_status: starting port polling. [ 268.596322] xhci_hcd: xhci_hc_died: xHCI host controller not responding, assume dead The EINT lag is described in a additional note in xhci specs 4.19.2: "Due to internal xHC scheduling and system delays, there will be a lag between a change bit being set and the Port Status Change Event that it generated being written to the Event Ring. If SW reads the PORTSC and sees a change bit set, there is no guarantee that the corresponding Port Status Change Event has already been written into the Event Ring." Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25skbuff: Unconditionally copy pfmemalloc in __skb_clone()Stefano Brivio
[ Upstream commit e78bfb0751d4e312699106ba7efbed2bab1a53ca ] Commit 8b7008620b84 ("net: Don't copy pfmemalloc flag in __copy_skb_header()") introduced a different handling for the pfmemalloc flag in copy and clone paths. In __skb_clone(), now, the flag is set only if it was set in the original skb, but not cleared if it wasn't. This is wrong and might lead to socket buffers being flagged with pfmemalloc even if the skb data wasn't allocated from pfmemalloc reserves. Copy the flag instead of ORing it. Reported-by: Sabrina Dubroca <sd@queasysnail.net> Fixes: 8b7008620b84 ("net: Don't copy pfmemalloc flag in __copy_skb_header()") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Tested-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25net: Don't copy pfmemalloc flag in __copy_skb_header()Stefano Brivio
[ Upstream commit 8b7008620b8452728cadead460a36f64ed78c460 ] The pfmemalloc flag indicates that the skb was allocated from the PFMEMALLOC reserves, and the flag is currently copied on skb copy and clone. However, an skb copied from an skb flagged with pfmemalloc wasn't necessarily allocated from PFMEMALLOC reserves, and on the other hand an skb allocated that way might be copied from an skb that wasn't. So we should not copy the flag on skb copy, and rather decide whether to allow an skb to be associated with sockets unrelated to page reclaim depending only on how it was allocated. Move the pfmemalloc flag before headers_start[0] using an existing 1-bit hole, so that __copy_skb_header() doesn't copy it. When cloning, we'll now take care of this flag explicitly, contravening to the warning comment of __skb_clone(). While at it, restore the newline usage introduced by commit b19372273164 ("net: reorganize sk_buff for faster __copy_skb_header()") to visually separate bytes used in bitfields after headers_start[0], that was gone after commit a9e419dc7be6 ("netfilter: merge ctinfo into nfct pointer storage area"), and describe the pfmemalloc flag in the kernel-doc structure comment. This doesn't change the size of sk_buff or cacheline boundaries, but consolidates the 15 bits hole before tc_index into a 2 bytes hole before csum, that could now be filled more easily. Reported-by: Patrick Talbert <ptalbert@redhat.com> Fixes: c93bdd0e03e8 ("netvm: allow skb allocation to use PFMEMALLOC reserves") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25net: usb: asix: replace mii_nway_restart in resume pathAlexander Couzens
[ Upstream commit 5c968f48021a9b3faa61ac2543cfab32461c0e05 ] mii_nway_restart is not pm aware which results in a rtnl deadlock. Implement mii_nway_restart manual by setting BMCR_ANRESTART if BMCR_ANENABLE is set. To reproduce: * plug an asix based usb network interface * wait until the device enters PM (~5 sec) * `ip link set eth1 up` will never return Fixes: d9fe64e51114 ("net: asix: Add in_pm parameter") Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25tg3: Add higher cpu clock for 5762.Sanjeev Bansal
[ Upstream commit 3a498606bb04af603a46ebde8296040b2de350d1 ] This patch has fix for TX timeout while running bi-directional traffic with 100 Mbps using 5762. Signed-off-by: Sanjeev Bansal <sanjeevb.bansal@broadcom.com> Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25qmi_wwan: add support for Quectel EG91Matevz Vucnik
[ Upstream commit 38cd58ed9c4e389799b507bcffe02a7a7a180b33 ] This adds the USB id of LTE modem Quectel EG91. It requires the same quirk as other Quectel modems to make it work. Signed-off-by: Matevz Vucnik <vucnikm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25ptp: fix missing break in switchGustavo A. R. Silva
[ Upstream commit 9ba8376ce1e2cbf4ce44f7e4bee1d0648e10d594 ] It seems that a *break* is missing in order to avoid falling through to the default case. Otherwise, checking *chan* makes no sense. Fixes: 72df7a7244c0 ("ptp: Allow reassigning calibration pin function") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25net: phy: fix flag masking in __set_phy_supportedHeiner Kallweit
[ Upstream commit df8ed346d4a806a6eef2db5924285e839604b3f9 ] Currently also the pause flags are removed from phydev->supported because they're not included in PHY_DEFAULT_FEATURES. I don't think this is intended, especially when considering that this function can be called via phy_set_max_speed() anywhere in a driver. Change the masking to mask out only the values we're going to change. In addition remove the misleading comment, job of this small function is just to adjust the supported and advertised speeds. Fixes: f3a6bd393c2c ("phylib: Add phy_set_max_speed helper") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25net/ipv4: Set oif in fib_compute_spec_dstDavid Ahern
[ Upstream commit e7372197e15856ec4ee66b668020a662994db103 ] Xin reported that icmp replies may not use the address on the device the echo request is received if the destination address is broadcast. Instead a route lookup is done without considering VRF context. Fix by setting oif in flow struct to the master device if it is enslaved. That directs the lookup to the VRF table. If the device is not enslaved, oif is still 0 so no affect. Fixes: cd2fbe1b6b51 ("net: Use VRF device index for lookups on RX") Reported-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25net: diag: Don't double-free TCP_NEW_SYN_RECV sockets in tcp_abortLorenzo Colitti
[ Upstream commit acc2cf4e37174646a24cba42fa53c668b2338d4e ] When tcp_diag_destroy closes a TCP_NEW_SYN_RECV socket, it first frees it by calling inet_csk_reqsk_queue_drop_and_and_put in tcp_abort, and then frees it again by calling sock_gen_put. Since tcp_abort only has one caller, and all the other codepaths in tcp_abort don't free the socket, just remove the free in that function. Cc: David Ahern <dsa@cumulusnetworks.com> Tested: passes Android sock_diag_test.py, which exercises this codepath Fixes: d7226c7a4dd1 ("net: diag: Fix refcnt leak in error path destroying socket") Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsa@cumulusnetworks.com> Tested-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25lib/rhashtable: consider param->min_size when setting initial table sizeDavidlohr Bueso
[ Upstream commit 107d01f5ba10f4162c38109496607eb197059064 ] rhashtable_init() currently does not take into account the user-passed min_size parameter unless param->nelem_hint is set as well. As such, the default size (number of buckets) will always be HASH_DEFAULT_SIZE even if the smallest allowed size is larger than that. Remediate this by unconditionally calling into rounded_hashtable_size() and handling things accordingly. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25ipv6: fix useless rol32 call on hashColin Ian King
[ Upstream commit 169dc027fb02492ea37a0575db6a658cf922b854 ] The rol32 call is currently rotating hash but the rol'd value is being discarded. I believe the current code is incorrect and hash should be assigned the rotated value returned from rol32. Thanks to David Lebrun for spotting this. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25ipv4: Return EINVAL when ping_group_range sysctl doesn't map to user nsTyler Hicks
[ Upstream commit 70ba5b6db96ff7324b8cfc87e0d0383cf59c9677 ] The low and high values of the net.ipv4.ping_group_range sysctl were being silently forced to the default disabled state when a write to the sysctl contained GIDs that didn't map to the associated user namespace. Confusingly, the sysctl's write operation would return success and then a subsequent read of the sysctl would indicate that the low and high values are the overflowgid. This patch changes the behavior by clearly returning an error when the sysctl write operation receives a GID range that doesn't map to the associated user namespace. In such a situation, the previous value of the sysctl is preserved and that range will be returned in a subsequent read of the sysctl. Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25gen_stats: Fix netlink stats dumping in the presence of paddingToke Høiland-Jørgensen
[ Upstream commit d5a672ac9f48f81b20b1cad1d9ed7bbf4e418d4c ] The gen_stats facility will add a header for the toplevel nlattr of type TCA_STATS2 that contains all stats added by qdisc callbacks. A reference to this header is stored in the gnet_dump struct, and when all the per-qdisc callbacks have finished adding their stats, the length of the containing header will be adjusted to the right value. However, on architectures that need padding (i.e., that don't set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS), the padding nlattr is added before the stats, which means that the stored pointer will point to the padding, and so when the header is fixed up, the result is just a very big padding nlattr. Because most qdiscs also supply the legacy TCA_STATS struct, this problem has been mostly invisible, but we exposed it with the netlink attribute-based statistics in CAKE. Fix the issue by fixing up the stored pointer if it points to a padding nlattr. Tested-by: Pete Heist <pete@heistp.net> Tested-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25drm/i915: Fix hotplug irq ack on i965/g4xVille Syrjälä
commit 96a85cc517a9ee4ae5e8d7f5a36cba05023784eb upstream. Just like with PIPESTAT, the edge triggered IIR on i965/g4x also causes problems for hotplug interrupts. To make sure we don't get the IIR port interrupt bit stuck low with the ISR bit high we must force an edge in ISR. Unfortunately we can't borrow the PIPESTAT trick and toggle the enable bits in PORT_HOTPLUG_EN as that act itself generates hotplug interrupts. Instead we just have to loop until we've cleared PORT_HOTPLUG_STAT, or we just give up and WARN. v2: Don't frob with PORT_HOTPLUG_EN Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180614175625.1615-1-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> (cherry picked from commit 0ba7c51a6fd80a89236f6ceb52e63f8a7f62bfd3) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25vfio/pci: Fix potential Spectre v1Gustavo A. R. Silva
commit 0e714d27786ce1fb3efa9aac58abc096e68b1c2a upstream. info.index can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/vfio/pci/vfio_pci.c:734 vfio_pci_ioctl() warn: potential spectre issue 'vdev->region' Fix this by sanitizing info.index before indirectly using it to index vdev->region Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25mm/huge_memory.c: fix data loss when splitting a file pmdHugh Dickins
commit e1f1b1572e8db87a56609fd05bef76f98f0e456a upstream. __split_huge_pmd_locked() must check if the cleared huge pmd was dirty, and propagate that to PageDirty: otherwise, data may be lost when a huge tmpfs page is modified then split then reclaimed. How has this taken so long to be noticed? Because there was no problem when the huge page is written by a write system call (shmem_write_end() calls set_page_dirty()), nor when the page is allocated for a write fault (fault_dirty_shared_page() calls set_page_dirty()); but when allocated for a read fault (which MAP_POPULATE simulates), no set_page_dirty(). Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1807111741430.1106@eggly.anvils Fixes: d21b9e57c74c ("thp: handle file pages in split_huge_pmd()") Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Ashwin Chaugule <ashwinch@google.com> Reviewed-by: Yang Shi <yang.shi@linux.alibaba.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25mm: memcg: fix use after free in mem_cgroup_iter()Jing Xia
commit 9f15bde671355c351cf20d9f879004b234353100 upstream. It was reported that a kernel crash happened in mem_cgroup_iter(), which can be triggered if the legacy cgroup-v1 non-hierarchical mode is used. Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b8f ...... Call trace: mem_cgroup_iter+0x2e0/0x6d4 shrink_zone+0x8c/0x324 balance_pgdat+0x450/0x640 kswapd+0x130/0x4b8 kthread+0xe8/0xfc ret_from_fork+0x10/0x20 mem_cgroup_iter(): ...... if (css_tryget(css)) <-- crash here break; ...... The crashing reason is that mem_cgroup_iter() uses the memcg object whose pointer is stored in iter->position, which has been freed before and filled with POISON_FREE(0x6b). And the root cause of the use-after-free issue is that invalidate_reclaim_iterators() fails to reset the value of iter->position to NULL when the css of the memcg is released in non- hierarchical mode. Link: http://lkml.kernel.org/r/1531994807-25639-1-git-send-email-jing.xia@unisoc.com Fixes: 6df38689e0e9 ("mm: memcontrol: fix possible memcg leak due to interrupted reclaim") Signed-off-by: Jing Xia <jing.xia.mail@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: <chunyan.zhang@unisoc.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25ARC: configs: Remove CONFIG_INITRAMFS_SOURCE from defconfigsAlexey Brodkin
commit 64234961c145606b36eaa82c47b11be842b21049 upstream. We used to have pre-set CONFIG_INITRAMFS_SOURCE with local path to intramfs in ARC defconfigs. This was quite convenient for in-house development but not that convenient for newcomers who obviusly don't have folders like "arc_initramfs" next to the Linux source tree. Which leads to quite surprising failure of defconfig building: ------------------------------->8----------------------------- ../scripts/gen_initramfs_list.sh: Cannot open '../../arc_initramfs_hs/' ../usr/Makefile:57: recipe for target 'usr/initramfs_data.cpio.gz' failed make[2]: *** [usr/initramfs_data.cpio.gz] Error 1 ------------------------------->8----------------------------- So now when more and more people start to deal with our defconfigs let's make their life easier with removal of CONFIG_INITRAMFS_SOURCE. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: stable@vger.kernel.org Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25ARC: mm: allow mprotect to make stack mappings executableVineet Gupta
commit 93312b6da4df31e4102ce5420e6217135a16c7ea upstream. mprotect(EXEC) was failing for stack mappings as default vm flags was missing MAYEXEC. This was triggered by glibc test suite nptl/tst-execstack testcase What is surprising is that despite running LTP for years on, we didn't catch this issue as it lacks a directed test case. gcc dejagnu tests with nested functions also requiring exec stack work fine though because they rely on the GNU_STACK segment spit out by compiler and handled in kernel elf loader. This glibc case is different as the stack is non exec to begin with and a dlopen of shared lib with GNU_STACK segment triggers the exec stack proceedings using a mprotect(PROT_EXEC) which was broken. CC: stable@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25ARC: Fix CONFIG_SWAPAlexey Brodkin
commit 6e3761145a9ba3ce267c330b6bff51cf6a057b06 upstream. swap was broken on ARC due to silly copy-paste issue. We encode offset from swapcache page in __swp_entry() as (off << 13) but were not decoding back in __swp_offset() as (off >> 13) - it was still (off << 13). This finally fixes swap usage on ARC. | # mkswap /dev/sda2 | | # swapon -a -e /dev/sda2 | Adding 500728k swap on /dev/sda2. Priority:-2 extents:1 across:500728k | | # free | total used free shared buffers cached | Mem: 765104 13456 751648 4736 8 4736 | -/+ buffers/cache: 8712 756392 | Swap: 500728 0 500728 Cc: stable@vger.kernel.org Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25ALSA: rawmidi: Change resized buffers atomicallyTakashi Iwai
commit 39675f7a7c7e7702f7d5341f1e0d01db746543a0 upstream. The SNDRV_RAWMIDI_IOCTL_PARAMS ioctl may resize the buffers and the current code is racy. For example, the sequencer client may write to buffer while it being resized. As a simple workaround, let's switch to the resized buffer inside the stream runtime lock. Reported-by: syzbot+52f83f0ea8df16932f7f@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25fat: fix memory allocation failure handling of match_strdup()OGAWA Hirofumi
commit 35033ab988c396ad7bce3b6d24060c16a9066db8 upstream. In parse_options(), if match_strdup() failed, parse_options() leaves opts->iocharset in unexpected state (i.e. still pointing the freed string). And this can be the cause of double free. To fix, this initialize opts->iocharset always when freeing. Link: http://lkml.kernel.org/r/8736wp9dzc.fsf@mail.parknet.co.jp Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Reported-by: syzbot+90b8e10515ae88228a92@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25x86/MCE: Remove min interval polling limitationDewet Thibaut
commit fbdb328c6bae0a7c78d75734a738b66b86dffc96 upstream. commit b3b7c4795c ("x86/MCE: Serialize sysfs changes") introduced a min interval limitation when setting the check interval for polled MCEs. However, the logic is that 0 disables polling for corrected MCEs, see Documentation/x86/x86_64/machinecheck. The limitation prevents disabling. Remove this limitation and allow the value 0 to disable polling again. Fixes: b3b7c4795c ("x86/MCE: Serialize sysfs changes") Signed-off-by: Dewet Thibaut <thibaut.dewet@nokia.com> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> [ Massage commit message. ] Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20180716084927.24869-1-alexander.sverdlin@nokia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25x86/apm: Don't access __preempt_count with zeroed fsVille Syrjälä
commit 6f6060a5c9cc76fdbc22748264e6aa3779ec2427 upstream. APM_DO_POP_SEGS does not restore fs/gs which were zeroed by APM_DO_ZERO_SEGS. Trying to access __preempt_count with zeroed fs doesn't really work. Move the ibrs call outside the APM_DO_SAVE_SEGS/APM_DO_RESTORE_SEGS invocations so that fs is actually restored before calling preempt_enable(). Fixes the following sort of oopses: [ 0.313581] general protection fault: 0000 [#1] PREEMPT SMP [ 0.313803] Modules linked in: [ 0.314040] CPU: 0 PID: 268 Comm: kapmd Not tainted 4.16.0-rc1-triton-bisect-00090-gdd84441a7971 #19 [ 0.316161] EIP: __apm_bios_call_simple+0xc8/0x170 [ 0.316161] EFLAGS: 00210016 CPU: 0 [ 0.316161] EAX: 00000102 EBX: 00000000 ECX: 00000102 EDX: 00000000 [ 0.316161] ESI: 0000530e EDI: dea95f64 EBP: dea95f18 ESP: dea95ef0 [ 0.316161] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 [ 0.316161] CR0: 80050033 CR2: 00000000 CR3: 015d3000 CR4: 000006d0 [ 0.316161] Call Trace: [ 0.316161] ? cpumask_weight.constprop.15+0x20/0x20 [ 0.316161] on_cpu0+0x44/0x70 [ 0.316161] apm+0x54e/0x720 [ 0.316161] ? __switch_to_asm+0x26/0x40 [ 0.316161] ? __schedule+0x17d/0x590 [ 0.316161] kthread+0xc0/0xf0 [ 0.316161] ? proc_apm_show+0x150/0x150 [ 0.316161] ? kthread_create_worker_on_cpu+0x20/0x20 [ 0.316161] ret_from_fork+0x2e/0x38 [ 0.316161] Code: da 8e c2 8e e2 8e ea 57 55 2e ff 1d e0 bb 5d b1 0f 92 c3 5d 5f 07 1f 89 47 0c 90 8d b4 26 00 00 00 00 90 8d b4 26 00 00 00 00 90 <64> ff 0d 84 16 5c b1 74 7f 8b 45 dc 8e e0 8b 45 d8 8e e8 8b 45 [ 0.316161] EIP: __apm_bios_call_simple+0xc8/0x170 SS:ESP: 0068:dea95ef0 [ 0.316161] ---[ end trace 656253db2deaa12c ]--- Fixes: dd84441a7971 ("x86/speculation: Use IBRS if available before calling into firmware") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: "H. Peter Anvin" <hpa@zytor.com> Link: https://lkml.kernel.org/r/20180709133534.5963-1-ville.syrjala@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25KVM/Eventfd: Avoid crash when assign and deassign specific eventfd in parallel.Lan Tianyu
commit b5020a8e6b54d2ece80b1e7dedb33c79a40ebd47 upstream. Syzbot reports crashes in kvm_irqfd_assign(), caused by use-after-free when kvm_irqfd_assign() and kvm_irqfd_deassign() run in parallel for one specific eventfd. When the assign path hasn't finished but irqfd has been added to kvm->irqfds.items list, another thead may deassign the eventfd and free struct kvm_kernel_irqfd(). The assign path then uses the struct kvm_kernel_irqfd that has been freed by deassign path. To avoid such issue, keep irqfd under kvm->irq_srcu protection after the irqfd has been added to kvm->irqfds.items list, and call synchronize_srcu() in irq_shutdown() to make sure that irqfd has been fully initialized in the assign path. Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Tianyu Lan <tianyu.lan@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-22Linux 4.9.114v4.9.114Greg Kroah-Hartman
2018-07-22string: drop __must_check from strscpy() and restore strscpy() usages in cgroupTejun Heo
commit 08a77676f9c5fc69a681ccd2cd8140e65dcb26c7 upstream. e7fd37ba1217 ("cgroup: avoid copying strings longer than the buffers") converted possibly unsafe strncpy() usages in cgroup to strscpy(). However, although the callsites are completely fine with truncated copied, because strscpy() is marked __must_check, it led to the following warnings. kernel/cgroup/cgroup.c: In function ‘cgroup_file_name’: kernel/cgroup/cgroup.c:1400:10: warning: ignoring return value of ‘strscpy’, declared with attribute warn_unused_result [-Wunused-result] strscpy(buf, cft->name, CGROUP_FILE_NAME_MAX); ^ To avoid the warnings, 50034ed49645 ("cgroup: use strlcpy() instead of strscpy() to avoid spurious warning") switched them to strlcpy(). strlcpy() is worse than strlcpy() because it unconditionally runs strlen() on the source string, and the only reason we switched to strlcpy() here was because it was lacking __must_check, which doesn't reflect any material differences between the two function. It's just that someone added __must_check to strscpy() and not to strlcpy(). These basic string copy operations are used in variety of ways, and one of not-so-uncommon use cases is safely handling truncated copies, where the caller naturally doesn't care about the return value. The __must_check doesn't match the actual use cases and forces users to opt for inferior variants which lack __must_check by happenstance or spread ugly (void) casts. Remove __must_check from strscpy() and restore strscpy() usages in cgroup. Signed-off-by: Tejun Heo <tj@kernel.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ma Shimiao <mashimiao.fnst@cn.fujitsu.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Chris Metcalf <cmetcalf@ezchip.com> [backport only the string.h portion to remove build warnings starting to show up - gregkh] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-22arm64: KVM: Add ARCH_WORKAROUND_2 discovery through ARCH_FEATURES_FUNC_IDMarc Zyngier
commit 5d81f7dc9bca4f4963092433e27b508cbe524a32 upstream. Now that all our infrastructure is in place, let's expose the availability of ARCH_WORKAROUND_2 to guests. We take this opportunity to tidy up a couple of SMCCC constants. Acked-by: Christoffer Dall <christoffer.dall@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-22arm64: KVM: Handle guest's ARCH_WORKAROUND_2 requestsMarc Zyngier
commit b4f18c063a13dfb33e3a63fe1844823e19c2265e upstream. In order to forward the guest's ARCH_WORKAROUND_2 calls to EL3, add a small(-ish) sequence to handle it at EL2. Special care must be taken to track the state of the guest itself by updating the workaround flags. We also rely on patching to enable calls into the firmware. Note that since we need to execute branches, this always executes after the Spectre-v2 mitigation has been applied. Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-22arm64: KVM: Add ARCH_WORKAROUND_2 support for guestsMarc Zyngier
commit 55e3748e8902ff641e334226bdcb432f9a5d78d3 upstream. In order to offer ARCH_WORKAROUND_2 support to guests, we need a bit of infrastructure. Let's add a flag indicating whether or not the guest uses SSBD mitigation. Depending on the state of this flag, allow KVM to disable ARCH_WORKAROUND_2 before entering the guest, and enable it when exiting it. Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-22arm64: KVM: Add HYP per-cpu accessorsMarc Zyngier
commit 85478bab409171de501b719971fd25a3d5d639f9 upstream. As we're going to require to access per-cpu variables at EL2, let's craft the minimum set of accessors required to implement reading a per-cpu variable, relying on tpidr_el2 to contain the per-cpu offset. Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-22arm64: ssbd: Add prctl interface for per-thread mitigationMarc Zyngier
commit 9cdc0108baa8ef87c76ed834619886a46bd70cbe upstream. If running on a system that performs dynamic SSBD mitigation, allow userspace to request the mitigation for itself. This is implemented as a prctl call, allowing the mitigation to be enabled or disabled at will for this particular thread. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-22arm64: ssbd: Introduce thread flag to control userspace mitigationMarc Zyngier
commit 9dd9614f5476687abbff8d4b12cd08ae70d7c2ad upstream. In order to allow userspace to be mitigated on demand, let's introduce a new thread flag that prevents the mitigation from being turned off when exiting to userspace, and doesn't turn it on on entry into the kernel (with the assumption that the mitigation is always enabled in the kernel itself). This will be used by a prctl interface introduced in a later patch. Reviewed-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-22arm64: ssbd: Restore mitigation status on CPU resumeMarc Zyngier
commit 647d0519b53f440a55df163de21c52a8205431cc upstream. On a system where firmware can dynamically change the state of the mitigation, the CPU will always come up with the mitigation enabled, including when coming back from suspend. If the user has requested "no mitigation" via a command line option, let's enforce it by calling into the firmware again to disable it. Similarily, for a resume from hibernate, the mitigation could have been disabled by the boot kernel. Let's ensure that it is set back on in that case. Acked-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-22arm64: ssbd: Skip apply_ssbd if not using dynamic mitigationMarc Zyngier
commit 986372c4367f46b34a3c0f6918d7fb95cbdf39d6 upstream. In order to avoid checking arm64_ssbd_callback_required on each kernel entry/exit even if no mitigation is required, let's add yet another alternative that by default jumps over the mitigation, and that gets nop'ed out if we're doing dynamic mitigation. Think of it as a poor man's static key... Reviewed-by: Julien Grall <julien.grall@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-22arm64: ssbd: Add global mitigation state accessorMarc Zyngier
commit c32e1736ca03904c03de0e4459a673be194f56fd upstream. We're about to need the mitigation state in various parts of the kernel in order to do the right thing for userspace and guests. Let's expose an accessor that will let other subsystems know about the state. Reviewed-by: Julien Grall <julien.grall@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-22arm64: Add 'ssbd' command-line optionMarc Zyngier
commit a43ae4dfe56a01f5b98ba0cb2f784b6a43bafcc6 upstream. On a system where the firmware implements ARCH_WORKAROUND_2, it may be useful to either permanently enable or disable the workaround for cases where the user decides that they'd rather not get a trap overhead, and keep the mitigation permanently on or off instead of switching it on exception entry/exit. In any case, default to the mitigation being enabled. Reviewed-by: Julien Grall <julien.grall@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-22arm64: Add ARCH_WORKAROUND_2 probingMarc Zyngier
commit a725e3dda1813ed306734823ac4c65ca04e38500 upstream. As for Spectre variant-2, we rely on SMCCC 1.1 to provide the discovery mechanism for detecting the SSBD mitigation. A new capability is also allocated for that purpose, and a config option. Reviewed-by: Julien Grall <julien.grall@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-22arm64: Add per-cpu infrastructure to call ARCH_WORKAROUND_2Marc Zyngier
commit 5cf9ce6e5ea50f805c6188c04ed0daaec7b6887d upstream. In a heterogeneous system, we can end up with both affected and unaffected CPUs. Let's check their status before calling into the firmware. Reviewed-by: Julien Grall <julien.grall@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-22arm64: Call ARCH_WORKAROUND_2 on transitions between EL0 and EL1Marc Zyngier
commit 8e2906245f1e3b0d027169d9f2e55ce0548cb96e upstream. In order for the kernel to protect itself, let's call the SSBD mitigation implemented by the higher exception level (either hypervisor or firmware) on each transition between userspace and kernel. We must take the PSCI conduit into account in order to target the right exception level, hence the introduction of a runtime patching callback. Reviewed-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Julien Grall <julien.grall@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-22arm/arm64: smccc: Add SMCCC-specific return codesMarc Zyngier
commit eff0e9e1078ea7dc1d794dc50e31baef984c46d7 upstream. We've so far used the PSCI return codes for SMCCC because they were extremely similar. But with the new ARM DEN 0070A specification, "NOT_REQUIRED" (-2) is clashing with PSCI's "PSCI_RET_INVALID_PARAMS". Let's bite the bullet and add SMCCC specific return codes. Users can be repainted as and when required. Acked-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-22KVM: arm64: Avoid storing the vcpu pointer on the stackChristoffer Dall
Commit 4464e210de9e80e38de59df052fe09ea2ff80b1b upstream. We already have the percpu area for the host cpu state, which points to the VCPU, so there's no need to store the VCPU pointer on the stack on every context switch. We can be a little more clever and just use tpidr_el2 for the percpu offset and load the VCPU pointer from the host context. This has the benefit of being able to retrieve the host context even when our stack is corrupted, and it has a potential performance benefit because we trade a store plus a load for an mrs and a load on a round trip to the guest. This does require us to calculate the percpu offset without including the offset from the kernel mapping of the percpu array to the linear mapping of the array (which is what we store in tpidr_el1), because a PC-relative generated address in EL2 is already giving us the hyp alias of the linear mapping of a kernel address. We do this in __cpu_init_hyp_mode() by using kvm_ksym_ref(). The code that accesses ESR_EL2 was previously using an alternative to use the _EL1 accessor on VHE systems, but this was actually unnecessary as the _EL1 accessor aliases the ESR_EL2 register on VHE, and the _EL2 accessor does the same thing on both systems. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-22KVM: arm/arm64: Do not use kern_hyp_va() with kvm_vgic_global_stateMarc Zyngier
Commit 44a497abd621a71c645f06d3d545ae2f46448830 upstream. kvm_vgic_global_state is part of the read-only section, and is usually accessed using a PC-relative address generation (adrp + add). It is thus useless to use kern_hyp_va() on it, and actively problematic if kern_hyp_va() becomes non-idempotent. On the other hand, there is no way that the compiler is going to guarantee that such access is always PC relative. So let's bite the bullet and provide our own accessor. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: James Morse <james.morse@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-22arm64: alternatives: Add dynamic patching featureMarc Zyngier
Commit dea5e2a4c5bcf196f879a66cebdcca07793e8ba4 upstream. We've so far relied on a patching infrastructure that only gave us a single alternative, without any way to provide a range of potential replacement instructions. For a single feature, this is an all or nothing thing. It would be interesting to have a more flexible grained way of patching the kernel though, where we could dynamically tune the code that gets injected. In order to achive this, let's introduce a new form of dynamic patching, assiciating a callback to a patching site. This callback gets source and target locations of the patching request, as well as the number of instructions to be patched. Dynamic patching is declared with the new ALTERNATIVE_CB and alternative_cb directives: asm volatile(ALTERNATIVE_CB("mov %0, #0\n", callback) : "r" (v)); or alternative_cb callback mov x0, #0 alternative_cb_end where callback is the C function computing the alternative. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-22KVM: arm64: Stop save/restoring host tpidr_el1 on VHEJames Morse
Commit 1f742679c33bc083722cb0b442a95d458c491b56 upstream. Now that a VHE host uses tpidr_el2 for the cpu offset we no longer need KVM to save/restore tpidr_el1. Move this from the 'common' code into the non-vhe code. While we're at it, on VHE we don't need to save the ELR or SPSR as kernel_entry in entry.S will have pushed these onto the kernel stack, and will restore them from there. Move these to the non-vhe code as we need them to get back to the host. Finally remove the always-copy-tpidr we hid in the stage2 setup code, cpufeature's enable callback will do this for VHE, we only need KVM to do it for non-vhe. Add the copy into kvm-init instead. Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-22arm64: alternatives: use tpidr_el2 on VHE hostsJames Morse
Commit 6d99b68933fbcf51f84fcbba49246ce1209ec193 upstream. Now that KVM uses tpidr_el2 in the same way as Linux's cpu_offset in tpidr_el1, merge the two. This saves KVM from save/restoring tpidr_el1 on VHE hosts, and allows future code to blindly access per-cpu variables without triggering world-switch. Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-09-17 02:16:27 +0000