summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-05-04Fix the x86_64 implementation of call_rwsem_wait()David Howells
The x86_64 call_rwsem_wait() treats the active state counter part of the R/W semaphore state as being 16-bit when it's actually 32-bit (it's half of the 64-bit state). It should do "decl %edx" not "decw %dx". Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-04Merge branch 'i2c-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c-core: Use per-adapter userspace device lists i2c: Fix probing of FSC hardware monitoring chips i2c-core: Erase pointer to clientdata on removal
2010-05-04Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: Fix resource leak in failure path of perf_event_open()
2010-05-04Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: rcu: Fix RCU lockdep splat on freezer_fork path rcu: Fix RCU lockdep splat in set_task_cpu on fork path mutex: Don't spin when the owner CPU is offline or other weird cases
2010-05-04i2c-core: Use per-adapter userspace device listsJean Delvare
Using a single list for all userspace devices leads to a dead lock on multiplexed buses in some circumstances (mux chip instantiated from userspace). This is solved by using a separate list for each bus segment. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Michael Lawnick <ml.lawnick@gmx.de>
2010-05-04i2c: Fix probing of FSC hardware monitoring chipsJean Delvare
Some FSC hardware monitoring chips (Syleus at least) doesn't like quick writes we typically use to probe for I2C chips. Use a regular byte read instead for the address they live at (0x73). These are the only known chips living at this address on PC systems. For clarity, this fix should not be needed for kernels 2.6.30 and later, as we started instantiating the hwmon devices explicitly based on DMI data. Still, this fix is valuable in the following two cases: * Support for recent FSC chips on older kernels. The DMI-based device instantiation is more difficult to backport than the device support itself. * Case where the DMI-based device instantiation fails, whatever the reason. We fall back to probing in that case, so it should work. This fixes kernel bug #15634: https://bugzilla.kernel.org/show_bug.cgi?id=15634 Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Cc: stable@kernel.org
2010-05-04i2c-core: Erase pointer to clientdata on removalWolfram Sang
After discovering that a lot of i2c-drivers leave the pointer to their clientdata dangling, it was decided to let the core handle this issue. It is assumed that the core may access the private data after remove() as there are no guarantees for the lifetime of such pointers anyhow (see thread starting at http://lkml.org/lkml/2010/3/21/68) Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-05-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: remove bad auth_x kmem_cache ceph: fix lockless caps check ceph: clear dir complete, invalidate dentry on replayed rename ceph: fix direct io truncate offset ceph: discard incoming messages with bad seq # ceph: fix seq counting for skipped messages ceph: add missing #includes ceph: fix leaked spinlock during mds reconnect ceph: print more useful version info on module load ceph: fix snap realm splits ceph: clear dir complete on d_move
2010-05-03ceph: remove bad auth_x kmem_cacheSage Weil
It's useless, since our allocations are already a power of 2. And it was allocated per-instance (not globally), which caused a name collision when we tried to mount a second file system with auth_x enabled. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-03ceph: fix lockless caps checkSage Weil
The __ variant requires caller to hold i_lock. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-03ceph: clear dir complete, invalidate dentry on replayed renameSage Weil
If a rename operation is resent to the MDS following an MDS restart, the client does not get a full reply (containing the resulting metadata) back. In that case, a ceph_rename() needs to compensate by doing anything useful that fill_inode() would have, like d_move(). It also needs to invalidate the dentry (to workaround the vfs_rename_dir() bug) and clear the dir complete flag, just like fill_trace(). Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-03ceph: fix direct io truncate offsetSage Weil
truncate_inode_pages_range wants the end offset to align with the last byte in a page. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-03ceph: discard incoming messages with bad seq #Sage Weil
We can get old message seq #'s after a tcp reconnect for stateful sessions (i.e., the MDS). If we get a higher seq #, that is an error, and we shouldn't see any bad seq #'s for stateless (mon, osd) connections. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-03ceph: fix seq counting for skipped messagesSage Weil
Increment in_seq even when the message is skipped for some reason. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-03ceph: add missing #includesSage Weil
Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-03ceph: fix leaked spinlock during mds reconnectSage Weil
Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-03ceph: print more useful version info on module loadSage Weil
Decouple the client version from the server side. Print relevant protocol and map version info instead. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-03ceph: fix snap realm splitsSage Weil
The snap realm split was checking i_snap_realm, not the list_head, to determine if an inode belonged in the new realm. The check always failed, which meant we always moved the inode, corrupting the old realm's list and causing various crashes. Also wait to release old realm reference to avoid possibility of use after free. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-03ceph: clear dir complete on d_moveSage Weil
d_move() reorders the d_subdirs list, breaking the readdir result caching. Unless/until d_move preserves that ordering, clear CEPH_I_COMPLETE on rename. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: ep93xx_wdt.c fix default timout value in MODULE_PARM_DESC string.
2010-05-03nilfs2: fix sync silent failureRyusuke Konishi
As of 32a88aa1, __sync_filesystem() will return 0 if s_bdi is not set. And nilfs does not set s_bdi anywhere. I noticed this problem by the warning introduced by the recent commit 5129a469 ("Catch filesystem lacking s_bdi"). WARNING: at fs/super.c:959 vfs_kern_mount+0xc5/0x14e() Hardware name: PowerEdge 2850 Modules linked in: nilfs2 loop tpm_tis tpm tpm_bios video shpchp pci_hotplug output dcdbas Pid: 3773, comm: mount.nilfs2 Not tainted 2.6.34-rc6-debug #38 Call Trace: [<c1028422>] warn_slowpath_common+0x60/0x90 [<c102845f>] warn_slowpath_null+0xd/0x10 [<c1095936>] vfs_kern_mount+0xc5/0x14e [<c1095a03>] do_kern_mount+0x32/0xbd [<c10a811e>] do_mount+0x671/0x6d0 [<c1073794>] ? __get_free_pages+0x1f/0x21 [<c10a684f>] ? copy_mount_options+0x2b/0xe2 [<c107b634>] ? strndup_user+0x48/0x67 [<c10a81de>] sys_mount+0x61/0x8f [<c100280c>] sysenter_do_call+0x12/0x32 This ensures to set s_bdi for nilfs and fixes the sync silent failure. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Acked-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-03watchdog: ep93xx_wdt.c fix default timout value in MODULE_PARM_DESC string.Wim Van Sebroeck
The WATCHDOG_TIMEOUT macro does not exist. The default timeout value is WDT_TIMEOUT. Fix the MODULE_PARM_DESC so that the code can compile again. reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-05-01perf: Fix resource leak in failure path of perf_event_open()Tejun Heo
perf_event_open() kfrees event after init failure which doesn't release all resources allocated by perf_event_alloc(). Use free_event() instead. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@au1.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: <stable@kernel.org> LKML-Reference: <4BDBE237.1040809@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-30Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (27 commits) MIPS: Loongson 2F: Fix of problems introduced by -mfix-loongson2f-jump MIPS: Loongson-2F: Use CONFIG_CPU_JUMP_WORKAROUNDS to control workarounds. MIPS: Loongson 2F: Enable fixups of the latest binutils MIPS: Loongson: Add CPU_LOONGSON2F_WORKAROUNDS MIPS: Kconfig: Make Broadcom SoC support naming consistent MIPS: BCM63xx: Update defconfig MIPS: oprofile: Fix breakage when CONFIG_OPROFILE=m STAGING: octeon-ethernet: Use proper phy addresses for Movidis hardware. NET: mdio-octeon: Enable the hardware before using it. I2C: Fix section mismatch errors in i2c-octeon.c MIPS: Loongson: Fix LOONGSON_ADDRWIN_CFG macro. MIPS: Loongson: Fix phys_mem_access_prot() check MIPS: Loongson: Fix find_vga_mem_init() MIPS: Loongson: Fix typo in gdium mach type string. MIPS: Use CKSEG1ADDR for uncached handler MIPS: Check for accesses beyond the end of the PGD. MIPS: Use uasm_i_ds{r,l}l_safe() instead of uasm_i_ds{r,l}l() in tlbex.c MIPS: Add uasm_i_dsrl_safe() and uasm_i_dsll_safe() to uasm. MIPS: die() does not call die notifier chain MIPS: Swarm, Littlesur: Enable PATA platform driver. ...
2010-04-30MIPS: Loongson 2F: Fix of problems introduced by -mfix-loongson2f-jumpWu Zhangjin
The -mfix-loongson2f-jump option provided by latest CVS binutils have fixed the out-of-order issue of Loongson-2F described in chapter 15 of the Loongson2F User Manual [1, 2], but introduced some problems. The option changes all of the jump target to "addr & 0xcfffffff" through the at($1) register, but for the reboot address of Loongson 2F 0xbfc00000 this is wrong. Avoids the problem via telling the assembler to not use the $at register. [1] Loongson2F User Manual (Chinese Version) http://www.loongson.cn/uploadfile/file/200808211 [2] English Version of Chapter 15: http://groups.google.com.hk/group/loongson-dev/msg/e0d2e220958f10a6?dmode=source Reported-and-tested-by: Liu Shiwei <liushiwei@gmail.com> Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1109/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-30MIPS: Loongson-2F: Use CONFIG_CPU_JUMP_WORKAROUNDS to control workarounds.Wu Zhangjin
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1106/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-30MIPS: Loongson 2F: Enable fixups of the latest binutilsWu Zhangjin
With the "Fixups of Loongson2F" patch [1] having been applied to binutils for binutils 2.20.1 we now can use it's time to enable the options provided by the patch to compile the kernel. Without these fixups, the system may hang if the erratum is triggered. For more information on these fixups please refer to the following references. [1] "Fixups of Loongson2F" patch for binutils(actually for gas) http://sourceware.org/ml/binutils/2009-11/msg00387.html [2] Chapter 15 of "Loongson2F User Manual"(Chinese Version) http://www.loongson.cn/uploadfile/file/200808211 [3] Chapter 15 of the English version Loongson 2F User Manual http://groups.google.com.hk/group/loongson-dev/msg/e0d2e220958f10a6?dmode=source Signed-off-by: Zhang Le <r0bertz@gentoo.org> Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Zhang Le <r0bertz@gentoo.org> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1106/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-30MIPS: Loongson: Add CPU_LOONGSON2F_WORKAROUNDSWu Zhangjin
As documented in the Loongson 2F User Manual [2, 3], the old Loongson2F series (2F01 / 2F02) have the NOP & JUMP issues which requires workarounds in the kernel and binutils. This issue has been rectified in Loongson 2F series 2F03 so no workarounds needed. Now that the workarounds [1] adding the the -mfix-loongson2f-nop and -mfix-loongson2f-jump options have been comitted to the binutils the CVS repository), we can add the workarounds in the kernel. The workarounds have no significant side effect on the system but may decrease performance so we control them through a a new CPU_LOONGSON2F_WORKAROUNDS config option allowing the users to only enable it as necessary. [1] "Fixups of Loongson2F" patch for binutils(actually for gas) http://sourceware.org/ml/binutils/2009-11/msg00387.html [2] Chapter 15 of "Loongson2F User Manual"(Chinese Version) http://www.loongson.cn/uploadfile/file/200808211 [3] English Version of the above chapter 15 http://groups.google.com.hk/group/loongson-dev/msg/e0d2e220958f10a6?dmode=source Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1105/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-30MIPS: Kconfig: Make Broadcom SoC support naming consistentFlorian Fainelli
Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1082/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-30MIPS: BCM63xx: Update defconfigFlorian Fainelli
the defconfig was out-of-sync since 2.6.30-rc6, update it with the new symbols and enable BCM6338, 6345, wireless, b43 driver and LEDs support. Signed-off-by: Fainelli <ffainelli@freebox.fr> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1081/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-30MIPS: oprofile: Fix breakage when CONFIG_OPROFILE=mWu Zhangjin
When the oprofile is compiled as a module do_IRQ() is not called in arch/mips/loongson/lemote-2f/irq.c due to a wrong #ifdef there. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1143/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-30STAGING: octeon-ethernet: Use proper phy addresses for Movidis hardware.David Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: netdev@vger.kernel.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/1091/ Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-30NET: mdio-octeon: Enable the hardware before using it.David Daney
In some cases the mdio bus is not enabled at the time of probing. This prevents anything from working, so we will enable it before trying to use it, and disable it when the driver is removed. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: netdev@vger.kernel.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/1090/ Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-30I2C: Fix section mismatch errors in i2c-octeon.cDavid Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-i2c@vger.kernel.org To: ben-linux@fluff.org To: khali@linux-fr.org Cc: linux-mips@linux-mips.org Cc: rade.bozic.ext@nsn.com Patchwork: http://patchwork.linux-mips.org/patch/1037/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-30MIPS: Loongson: Fix LOONGSON_ADDRWIN_CFG macro.Arnaud Patard
There's a typo in the LOONGSON_ADDRWIN_CFG macro. The cpu window mmap register address should contain the destination parameters not the source one. This has not been noticed because the code is only using source = destination. Signed-off-by: Arnaud Patard <apatard@mandriva.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1162/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-30MIPS: Loongson: Fix phys_mem_access_prot() checkArnaud Patard
The check used to determine if uncached accelerated should be used or not is wrong. The parenthesis are misplaced and making the test fail. Signed-off-by: Arnaud Patard <apatard@mandriva.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1161/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-30MIPS: Loongson: Fix find_vga_mem_init()Richard LIU
This allows to use all display device for instance DISPLAY_OTHER like SM501. Signed-off-by: Arnaud Patard <apatard@mandriva.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1160/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-30MIPS: Loongson: Fix typo in gdium mach type string.Arnaud Patard
It's not "gidum" but "gdium". Signed-off-by: Arnaud Patard <apatard@mandriva.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1159/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-30MIPS: Use CKSEG1ADDR for uncached handlerSebastian Andrzej Siewior
"MIPS: Calculate proper ebase value for 64-bit kernels" 9af43ea080dd5d6c7b34f38261780e5dd43537bc (lmo) rsp. f6be75d03c8870be91e6e2a195648ece04b6bb16 (kernel.org) broke some 64-bit MIPS systems. Before this we were using XKPHYS/cached as ebase and computed the uncached xphsys/unchached address for that area. After that commit ebase became a 32-bit compat address and convert does not work anymore. We now should use CKSEG1 for this. CKSEG1ADDR does just that in 32-bit and 64-bit. Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> To: Ralf Baechle <ralf@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1149/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-30MIPS: Check for accesses beyond the end of the PGD.David Daney
For some combinations of PAGE_SIZE and vmbits, it is possible to have userspace access that are beyond what is covered by the PGD, but within vmbits. Such an access would cause the TLB refill handler to load garbage values for PMD and PTE potentially giving userspace access to parts of the physical address space to which it is not entitled. In the TLB refill hot path, we add a single dsrl instruction so we can check if any bits outside of the range covered by the PGD are set. In the vmalloc side we then separate the bad case from the normal vmalloc case and call tlb_do_page_fault_0 if warranted. This slows us down a bit, but has the benefit of yielding deterministic behavior. [Ralf: Fixed build error for 32-bit kernels.] [Ralf: Folded lmo commit c8c0e22b2aa3982852b44279638ef37f9aa31b7d into this commit.] Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1152/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---
2010-04-30MIPS: Use uasm_i_ds{r,l}l_safe() instead of uasm_i_ds{r,l}l() in tlbex.cDavid Daney
This makes the code somewhat cleaner while reducing the risk of shift amount overflows when various page table related options are changed. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1154/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-30MIPS: Add uasm_i_dsrl_safe() and uasm_i_dsll_safe() to uasm.David Daney
This allows us to clean up the code by not having to explicitly code checks for shift amounts greater than 32. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1153/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-30MIPS: die() does not call die notifier chainYury Polyanskiy
The MIPS implementation of die() forgets to call notify_die() and thus notifiers registered via register_die_notifier() are not called. This results in kgdb not being activated on exceptions. The only subtlety is that notify_die declares its regs argument w/o const, so the const had to be removed from mips die() as well. [Ralf: Fixed build error for SGI IP22 and IP28 platforms.] Signed-off-by: Yury Polyanskiy <ypolyans@princeton.edu> Cc: linux-mips@linux-mips.org Patchworks: http://patchwork.linux-mips.org/patch/1142/ Acked-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---
2010-04-30MIPS: Swarm, Littlesur: Enable PATA platform driver.Sebastian Andrzej Siewior
According to include/asm/sibyte/swarm.h both systems provide a platform device for the ide controler. Until now the IDE subsystem was used which is deprecated by now. The same structure can be used with the PATA driver. Signed-off-by: Sebastian Andrzej Siewior <sebatian@breakpoint.cc> Cc: tbm@cyrius.com Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1127/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-30MIPS: DB1200: PCMCIA card detection must not be auto-enabled.Manuel Lauss
Same issues as SD card detection: One of both is always triggering and the handlers take care to shut it up and enable the other. To avoid messages about "unbalanced interrupt enable/disable" they must not be automatically enabled when initally requested. This was not an issue with the db1200_defconfig due to fortunate timings; on a build without network chip support the warnings appear. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1133/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-30MIPS: SB1250: Include correct header and fix a warningSebastian Andrzej Siewior
| arch/mips/pci/pci-sb1250.c: In function sb1250_pcibios_init: | arch/mips/pci/pci-sb1250.c:257: warning: assignment makes integer from pointer without a cast | arch/mips/pci/pci-sb1250.c:285: error: MAX_NR_CONSOLES undeclared (first use in this function) | arch/mips/pci/pci-sb1250.c:285: error: (Each undeclared identifier is reported only once | arch/mips/pci/pci-sb1250.c:285: error: for each function it appears in.) Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1136/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-30MIPS: Fixup screen_info struct initializationsSebastian Andrzej Siewior
|arch/mips/sibyte/swarm/setup.c:153: | warning: large integer implicitly truncated to unsigned type The field was changed in d9b26352 aka ("x86, setup: Store the boot cursor state"). This patch changes the values back they way they were before this extra field got introduced. While here, the other two boards are also converted to C99 initializer. Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1137/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-30MIPS: cmpxchg.h: Fix excessive indentation.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-30MIPS: Don't vmap things at address zero.David Daney
In the 64-bit kernel we use swapper_pg_dir for three different things. 1) xuseg mappings for kernel threads. 2) vmap mappings for all kernel-space accesses in xkseg. 3) vmap mappings for kernel modules in ksseg (kseg2). Due to how the TLB refill handlers work, any mapping established in xkseg or ksseg will also establish a xuseg mapping that should never be used by the kernel. In order to be able to use exceptions to trap NULL pointer dereferences, we need to ensure that nothing is mapped at address zero. Since vmap mappings in xkseg are reflected in xuseg, this means we need to ensure that there are no vmap mappings established at the start of xkseg. So we move back VMALLOC_START to avoid establishing vmap mappings at the start of xkseg. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1129/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-30MIPS: TXx9: Add missing MODULE_ALIAS definitions for TXx9 platform devicesGeert Uytterhoeven
This enables autoloading of the TXx9 sound driver on RBTX4927. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> To: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Linux MIPS Mailing List <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1101/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>