summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-04-12brcmutil: add new d11 interface supportFranky Lin
802.11 core interface is upgraded with 11ac support. Add channel spec support code to brcmutil. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-12brcmfmac: move chip download state code to sdio_chip.cFranky Lin
enter/exit download state routine is going to diverge with new ARM core introduced. Move corresponding code to sdio_chip.c for new ARM core support. Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-12brcmfmac: aggregate dongle ram access interfaceFranky Lin
For fullmac chips host driver can access to dongle RAM through SDIO function 1. Introduce brcmf_sdio_ramrw and place it at bcmsdh.c with other interface functions. Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-12brcmfmac: support save&restore firmware featurePiotr Haber
Save & restore is an advanced power saving feature, supported only on selected devices. SR operation is almost completely transparent to the driver. Support for it is hardware and firmware dependent. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-10ipw2x00: move to kstrto* functionsAndy Shevchenko
There is better to use kstrto* instead of simple_strtoul. In this case it applies a bit stricter rules for input as well. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-10rtlwifi: rtl8188ee: Fix loop that ends earlyLarry Finger
In routine _rtl8188e_read_power_value_fromprom(), there are loops initializing index_cck_base and index_bw40_base from the PROM. As the result of a typo, the second loop is ended one element too soon. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-10ath9k: implement buffer holding handling for EDMA FIFOFelix Fietkau
Inside one FIFO slot queue, EDMA chipsets have the same link pointer re-read race condition as older chipsets, so the same buffer holding logic needs to be used in order to avoid use-after-free bugs. Unlike on older chips, it can be skipped for the end of the queue. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-10ath9k: detect more kinds of invalid descriptorsFelix Fietkau
If AR_CRCErr, AR_PHYErr, AR_DecryptCRCErr or AR_MichaelErr is indicated in the rx status word, but AR_RxFrameOK is also set, the descriptor contents are typically invalid. This can show up as a warning about invalid MCS rates in a frame. Even with those checks in place, a descriptor with invalid MCS rates can still sometimes make it through to the driver (mostly on older hardware like AR91xx). Detect such errors in the last descriptor of a frame and discard the whole frame if present. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-10ath9k: fix handling of broken descriptorsFelix Fietkau
As the comment in ath_get_next_rx_buf indicates, if a descriptor with the done bit set follows one with the done bit cleared, both descriptors should be discarded, however the driver is not doing that yet. To fix this, use the rs->rs_more flag as an indicator that the following frame should be discarded. This also helps with the split buffer case: if the first part of the frame is discarded, the following parts need to be discarded as well, since they contain no valid header or usable data. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-10ath9k: improve dma map failure handlingFelix Fietkau
Instead of leaving the buffer without skb and breaking out of the loop (which could leak the rx buffer), use the common error path. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-10ath9k_common: remove ath9k_cmn_padposFelix Fietkau
It is equivalent to ieee80211_hdrlen Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-10ath9k_hw: make various ar5416/ar91xx rf banks constFelix Fietkau
Banks 0-3,7 are neither modified at run time, nor SREV dependent. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-10ath9k_hw: clean up RF Bank6 handling on AR5416/AR91xxFelix Fietkau
There are two sets of initvals for this RF bank, one with TPC support and one without. The TPC one always gets used, so remove the other one to avoid confusion. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-10rt2x00: rt2x00mmio: remove unused rt2x00pci_* definesGabor Juhos
All users are converted to use the rt2x00mmio_* functions so remove the now unused defines. The patch contain no functional changes. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-10rt2x00: rt2800pci: use the rt2x00mmio_* routinesGabor Juhos
Use the recently introduced rt2x00mmio_* routines instead of the rt2x00pci_* variants. The patch contains no functional changes. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-10rt2x00: rt61pci: use the rt2x00mmio_* routinesGabor Juhos
Use the recently introduced rt2x00mmio_* routines instead of the rt2x00pci_* variants. The patch contains no functional changes. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-10rt2x00: rt2500pci: use the rt2x00mmio_* routinesGabor Juhos
Use the recently introduced rt2x00mmio_* routines instead of the rt2x00pci_* variants. The patch contains no functional changes. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-10rt2x00: rt2400pci: use the rt2x00mmio_* routinesGabor Juhos
Use the recently introduced rt2x00mmio_* routines instead of the rt2x00pci_* variants. The patch contains no functional changes. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-10rt2x00: rt2x00mmio: use rt2x00mmio prefix in function namesGabor Juhos
The functions in the rt2x00mmio module has been moved from the rt2x00pci module. Each function uses the rt2x00pci prefix which is a bit confusing. Use the r2x000mmio prefix for each function to make it consistent with the module name. The renamed functions are used by several modules, and updating the names in all of them would result in a big patch. In order to keep the patch simple, add compatibility defines for the old function names. This allows to update the names in each module separately. After each module is updated, the defines can be removed. The patch contains no functional changes. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-10Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2013-04-10Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: drivers/net/wireless/ath/carl9170/debug.c drivers/net/wireless/ath/carl9170/main.c net/mac80211/ieee80211_i.h
2013-04-10Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/rt2x00/rt2x00pci.c
2013-04-08brcmfmac: only use ifidx from BDC header in brcmf_rx_frames()Arend van Spriel
In brcmf_rx_frames() the call to brcmf_fweh_process_skb() could change the ifidx using information in the event data. This is only different to the BDC ifidx for IF ADD event. However, the creation of the new interface is deferred to event worker so it does not exist. After brcmf_fweh_process_skb() it is only used to set statistics. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08brcmfmac: obtain wdev using vif object in action frame rxArend van Spriel
The function brcmf_p2p_notify_action_frame_rx() the wireless_dev is needed to pass the action frame to cfg80211. The wireless_dev is held in brcmf_cfg80211_vif object. Use that instead of the ieee80211_ptr in net_device as P2P_DEVICE interface does not have a net_device associated with it. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08brcmfmac: fix reception of P2P probe requests on P2P_DEVICE interfaceArend van Spriel
The probe requests received on P2P_DEVICE interface were not sent to wpa_supplicant, which makes the device not discoverable by peers. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08brcmfmac: wait for firmware event when creating P2P_DEVICE interfaceArend van Spriel
The firmware sends a IF event to notify the host driver that the P2P_DEVICE interface has been created. Wait for the event before returning the related wireless_dev. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08brcmfmac: support creation of P2P_DEVICE through user-spaceArend van Spriel
The current driver code creates a P2P_DEVICE through a module parameter. This device has a dummy netdevice which is not how this interface type is intended. This patch add proper support for the P2P_DEVICE interface type. This requires a wpa_supplicant with such support as well. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08brcmfmac: use struct brcmf_if instance iso netdevice in escan functionsArend van Spriel
escan functionality is also required for P2P device operations so it is better not to rely on struct netdevice instances. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08brcmfmac: use struct brcmf_if instance as parameter in brcmf_set_mpc()Arend van Spriel
Remove use of struct netdevice as parameter to brcmf_set_mpc() as it will not always be available, ie. there will be non-netdevice interfaces. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08brcmfmac: remove use of unconditional access of struct wireless_dev::netdevArend van Spriel
With the introduction of the P2P_DEVICE interface type an instance of struct wireless_dev does not always have a netdev assigned to it. Better use container_of() construct to obtain internal structure and go from there. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08brcmfmac: remove condition for calling event handlerArend van Spriel
In fweh module the event handler was only called if the struct brcmf_if instance had a non-null netdev associated. This restriction is no longer valid for P2P_DEVICE type of interface. This patch removes that restriction. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08brcmfmac: add role attribute to struct brcmf_if_event definitionArend van Spriel
According specification the IF event has an additional field indicating the role or type of the interface for which this event is sent. Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08brcmfmac: add hexadecimal trace of message payloadArend van Spriel
Adds a trace function used in brcmf_dbg_hex_dump() which adds the raw binary data to the trace. It requires trace-cmd plugin to see this data. Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08brcmfmac: firmware shared data version fixPiotr Haber
Firware shared data structure is backward compatible for fields we are interested in. Allow reading of shared data in case of version mismatch. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08brcmfmac: read firmware console without trap indicationPiotr Haber
Firmware console output can be read also when there was no trap indication. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08brcmfmac: handle firmware signals requesting for packetsArend van Spriel
The firmware can request the host driver for packets, by sending either the MAC_REQUEST_CREDIT or the MAC_REQUEST_PACKET primitive. This patch adds handling of these primitives. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08brcmfmac: handle firmware signalling destination entry stateArend van Spriel
Firmware can signal whether the host driver may sent packets for a specific destination or interface. This can happen when a destination is sleeping or when going off-channel. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08brcmfmac: fix unaligned access in TXSTATUS signal handlingArend van Spriel
reported by Hante. Needs to be squashed in commit 187fbcec. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08mwifiex: hold proper locks when accessing ra_list / bss_prio listsAndreas Fenkart
Not locking ra_list when dequeuing packets creates race conditions. When adding a packet 'tx_pkts_queued' is modified before setting highest_priority_queue. If in-between the main loop starts, it will see a packet queued (tx_pkts_queued > 0) but will not find it, since max prio is not set yet. Depending on the scheduling, the thread trying to add the packet could complete and restore the situation. But this is not something to rely on. Another race condition exists, if a new packet, exceeding current max prio is added. If concurrently a packet is dequeued, the newly set max prio will be overwritten with the value of the dequeued packet. This can occur, because selecting a packet and modifying the max prio is not atomic. The result in an infinite loop unless, a new packet is added that has at least the priority of the hidden packet. Same applies to bss_prio_tbl. Forward iteration is no proper lock-free technique and provides no protection from calls to list_del. Although BSS are currently not added/removed dynamically, this must not be the case in the future. Hence always hold proper locks when accessing those lists. Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08mwifiex: fix infinite loop by removing NO_PKT_PRIO_TIDAndreas Fenkart
Using NO_PKT_PRIO_TID and tx_pkts_queued to check for an empty state, can lead to a contradictory state, resulting in an infinite loop. Currently queueing and dequeuing of packets is not synchronized, and can happen concurrently. While tx_pkts_queued is incremented when adding a packet, max prio is set to NO_PKT when the WMM list is empty. If a packet is added right after the check for empty, but before setting max prio to NO_PKT, that packet is trapped and creates an infinite loop. Because of the new packet, tx_pkts_queued is at least 1, indicating wmm lists are not empty. Opposing that max prio is NO_PKT, which means "skip this wmm queue, it has no packets". The infinite loop results, because the main loop checks the wmm lists for not empty via tx_pkts_queued, but for dequeing it uses max_prio to see if it can skip current list. This will never end, unless a new packet is added which will restore max prio to the level of the trapped packet. The solution here is to rely on tx_pkts_queued solely for checking wmm queue to be empty, and drop the NO_PKT define. It does not address the locking issue. Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08mwifiex: remove unused tid_tbl_lock from mwifiex_tid_tblAndreas Fenkart
ra_list_spinlock is used to protect struct mwifiex_wmm_desc and embedded structures such as ra_list. tid_tbl_lock while more fine grained, is not used but in one function. That function is not called reentrantly. To protect ra_list from concurrent modification ra_list_spinlock must be held. Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08mwifiex: correct wrong list in list_empty checkAndreas Fenkart
adapter->bss_prio_tbl list has already been checked in outer loop. The inner loop works with priv_tmp->wmm.tid_tbl_ptr list. Also the lock taken, gives hint that this is likely a copy-paste error. Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08rtlwifi: rtl8188ee: Fix allyesconfig build failuresLarry Finger
An allyesconfig build of rtl8188ee yields the following duplicate entry points: drivers/net/wireless/rtlwifi/rtl8188ee/built-in.o: In function `.rtl92c_phy_ap_calibrate': (.text+0x21d14): multiple definition of `.rtl92c_phy_ap_calibrate' drivers/net/wireless/rtlwifi/rtl8192c/built-in.o:(.text+0xb1e8): first defined here drivers/net/wireless/rtlwifi/rtl8188ee/built-in.o: In function `rtl_hal_pwrseqcmdparsing': (.opd+0xed0): multiple definition of `rtl_hal_pwrseqcmdparsing' One of the routines is not used and can be deleted, the other is renamed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08rtlwifi: rtl8188ee: Fix linker warningsLarry Finger
Building rtl8188ee yields warnings such as the following: x86_64-linux-gcc: warning: drivers/net/wireless/rtlwifi: linker input file unused because linking not done The only potential cause is an extraneous space in the make file. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08ath9k: add support for DFS master modeZefir Kurtisi
These are the remaining knobs in ath9k to support DFS: * mark AR9280 and AR9580 as DFS tested * synchronize DFS regulatory domain to reg notifyer * set required RX filter flags for radar detection * process radar PHY errors at DFS detector * notify DFS master on radar detection DFS support requires CONFIG_ATH9K_DFS_CERTIFIED to be set. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08ath9k: add debugfs based DFS radar simulationZefir Kurtisi
This helps testing DFS without radar generating equipment and is required for certification. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08ath9k: add interface combinations for DFS masterZefir Kurtisi
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08ath: Let user know which keycache method is complaining.Ben Greear
Should make the warning messages more useful. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08mwifiex: fix negative cmd_pending countBing Zhao
cmd_pending is increased in mwifiex_wait_queue_complete() and decreased in mwifiex_complete_cmd() currently. If there are two or more commands in the cmd_pending_q the main worker thread will pick up next command from cmd_pending_q automatically after finishing current command. As a result mwifiex_wait_queue_complete() will not be called because the command is alreay completed. This leads to a negative number in cmd_pending count. Fix it by increasing cmd_pending when a cmd is queued into cmd_pending_q and decreasing when that cmd is recycled. For scan commands we don't perform inc/dec operations until it's moved from scan_pending_q to cmd_pending_q. This covers both synchronous and asynchronous commands. Reported-by: Daniel Drake <dsd@laptop.org> Tested-by: Daniel Drake <dsd@laptop.org> Tested-by: Marco Cesarano <marco@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08iwlwifi: dvm: handle FLUSH ampdu actions from mac80211Emmanuel Grumbach
Until now we didn't handle properly the FLUSH ampdu action coming from mac80211. This could result in SCD queue leak: mac80211 would STOP_FLUSH an AMPDU Tx session and remove the station. If we had still packets on the ring, we wouldn't deallocate the SCD queue and wait for it to be empty. The indication of the queue being empty comes from the Tx response flow which relies on the tid_data structure. The problem is that this structure has been cleared when the station has been removed. In order to solve this issue, block in the STOP_FLUSH ampdu_action until the SCD queue is flushed, and only then, let mac80211 move forward to remove the station. iwlagn_txfifo_flush had to be enhanced to allow this. The bug fixed here caused the "txq_id mismatch: 12 0" print. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-04 01:21:23 +0000