summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-03-28Linux 3.8.5v3.8.5Greg Kroah-Hartman
2013-03-28rt2x00: error in configurations with mesh support disabledFelix Fietkau
commit 6ef9e2f6d12ce9e2120916804d2ddd46b954a70b upstream. If CONFIG_MAC80211_MESH is not set, cfg80211 will now allow advertising interface combinations with NL80211_IFTYPE_MESH_POINT present. Add appropriate ifdefs to avoid running into errors. [Backported for 3.8-stable. Removed code of simultaneous AP and mesh mode added in 4a5fc6d 3.9-rc1.] Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Lingzhu Xiang <lxiang@redhat.com> Reviewed-by: CAI Qian <caiqian@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28ARM: DMA-mapping: add missing GFP_DMA flag for atomic buffer allocationMarek Szyprowski
commit 9d1400cf79afb49584b4873eb22cd5130cb341db upstream. Atomic pool should always be allocated from DMA zone if such zone is available in the system to avoid issues caused by limited dma mask of any of the devices used for making an atomic allocation. Reported-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28usb: musb: da8xx: Fix build breakage due to typoMikhail Kshevetskiy
commit db9e51617faad3a54d10b7cb340a82688ec0232d upstream. Commit 032ec49f5351e9cb242b1a1c367d14415043ab95 (usb: musb: drop useless board_mode usage) introduced a typo that breaks the build. Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@gmail.com> [ Fixed commit message ] Signed-off-by: Michael Riesch <michael.riesch@omicron.at> Cc: Mikhail Kshevetskiy <mikhail.kshevetskiy@gmail.com> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28USB: io_ti: fix get_icount for two port adaptersJohan Hovold
commit 5492bf3d5655b4954164f69c02955a7fca267611 upstream. Add missing get_icount field to two-port driver. The two-port driver was not updated when switching to the new icount interface in commit 0bca1b913aff ("tty: Convert the USB drivers to the new icount interface"). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28USB: garmin_gps: fix memory leak on disconnectJohan Hovold
commit 618aa1068df29c37a58045fe940f9106664153fd upstream. Remove bogus disconnect test introduced by 95bef012e ("USB: more serial drivers writing after disconnect") which prevented queued data from being freed on disconnect. The possible IO it was supposed to prevent is long gone. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28udf: Fix bitmap overflow on large filesystems with small block sizeJan Kara
commit 89b1f39eb4189de745fae554b0d614d87c8d5c63 upstream. For large UDF filesystems with 512-byte blocks the number of necessary bitmap blocks is larger than 2^16 so s_nr_groups in udf_bitmap overflows (the number will overflow for filesystems larger than 128 GB with 512-byte blocks). That results in ENOSPC errors despite the filesystem has plenty of free space. Fix the problem by changing s_nr_groups' type to 'int'. That is enough even for filesystems 2^32 blocks (UDF maximum) and 512-byte blocksize. Reported-and-tested-by: v10lator@myway.de Signed-off-by: Jan Kara <jack@suse.cz> Cc: Jim Trigg <jtrigg@spamcop.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28ACPI: Rework acpi_get_child() to be more efficientRafael J. Wysocki
commit 33f767d767e9a684e9cd60704d4c049a2014c8d5 upstream. Observe that acpi_get_child() doesn't need to use the helper struct acpi_find_child structure and change it to work without it. Also, using acpi_get_object_info() to get the output of _ADR for the given device is overkill, because that function does much more than just evaluating _ADR (let alone the additional memory allocation done by it). Moreover, acpi_get_child() doesn't need to loop any more once it has found a matching handle, so make it stop in that case. To prevent the results from changing, make it use do_acpi_find_child() as a post-order callback. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28efivars: Fix check for CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLEBen Hutchings
commit ca0ba26fbbd2d81c43085df49ce0abfe34535a90 upstream. The 'CONFIG_' prefix is not implicit in IS_ENABLED(). Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28efivars: Add module parameter to disable use as a pstore backendSeth Forshee
commit ec0971ba5372a4dfa753f232449d23a8fd98490e upstream. We know that with some firmware implementations writing too much data to UEFI variables can lead to bricking machines. Recent changes attempt to address this issue, but for some it may still be prudent to avoid writing large amounts of data until the solution has been proven on a wide variety of hardware. Crash dumps or other data from pstore can potentially be a large data source. Add a pstore_module parameter to efivars to allow disabling its use as a backend for pstore. Also add a config option, CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE, to allow setting the default value of this paramter to true (i.e. disabled by default). Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Cc: Josh Boyer <jwboyer@redhat.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28efivars: Allow disabling use as a pstore backendSeth Forshee
commit ed9dc8ce7a1c8115dba9483a9b51df8b63a2e0ef upstream. Add a new option, CONFIG_EFI_VARS_PSTORE, which can be set to N to avoid using efivars as a backend to pstore, as some users may want to compile out the code completely. Set the default to Y to maintain backwards compatability, since this feature has always been enabled until now. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Cc: Josh Boyer <jwboyer@redhat.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28USB: serial: fix interface refcountingJohan Hovold
commit d7971051e4df825e0bc11b995e87bfe86355b8e5 upstream. Make sure the interface is not released before our serial device. Note that drivers are still not allowed to access the interface in any way that may interfere with another driver that may have gotten bound to the same interface after disconnect returns. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28usb: gadget: ffs: fix enable multiple instancesAndrzej Pietrasiewicz
commit 3416905ba058e43112ad7b1b4859797f027f5a07 upstream. This patch fixes an "off-by-one" bug found in 581791f (FunctionFS: enable multiple functions). During gfs_bind/gfs_unbind the functionfs_bind/functionfs_unbind should be called for every functionfs instance. With the "i" pre-decremented they were not called for the zeroth instance. Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [ balbi@ti.com : added offending commit's subject ] Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28USB: EHCI: fix regression in QH unlinkingAlan Stern
commit d714aaf649460cbfd5e82e75520baa856b4fa0a0 upstream. This patch (as1670) fixes a regression caused by commit 6402c796d3b4205d3d7296157956c5100a05d7d6 (USB: EHCI: work around silicon bug in Intel's EHCI controllers). The workaround goes through two IAA cycles for each QH being unlinked. During the first cycle, the QH is not added to the async_iaa list (because it isn't fully gone from the hardware yet), which means that list will be empty. Unfortunately, I forgot to update the IAA watchdog timer routine. It thinks that an empty async_iaa list means the timer expiration was an error, which isn't true any more. This problem didn't show up during initial testing because the controllers being tested all had working IAA interrupts. But not all controllers do, and when the watchdog timer expires, the empty-list check prevents the second IAA cycle from starting. As a result, URB unlinks never complete. The check needs to be removed. Among the symptoms of the regression are processes stuck in D wait states and hangs during system shutdown. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Stephen Warren <swarren@wwwdotorg.org> Reported-and-tested-by: Sven Joachim <svenjoac@gmx.de> Reported-by: Andreas Bombe <aeb@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28USB: EHCI: fix regression during bus resumeAlan Stern
commit 2a40f324541ee61c22146214349c2ce9f5c30bcf upstream. This patch (as1663) fixes a regression caused by commit 6e0c3339a6f19d748f16091d0a05adeb1e1f822b (USB: EHCI: unlink one async QH at a time). In order to avoid keeping multiple QHs in an unusable intermediate state, that commit changed unlink_empty_async() so that it unlinks only one empty QH at a time. However, when the EHCI root hub is suspended, _all_ async QHs need to be unlinked. ehci_bus_suspend() used to do this by calling unlink_empty_async(), but now this only unlinks one of the QHs, not all of them. The symptom is that when the root hub is resumed, USB communications don't work for some period of time. This is because ehci-hcd doesn't realize it needs to restart the async schedule; it assumes that because some QHs are already on the schedule, the schedule must be running. The easiest way to fix the problem is add a new function that unlinks all the async QHs when the root hub is suspended. This patch should be applied to all kernels that have the 6e0c3339a6f1 commit. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Adrian Bassett <adrian.bassett@hotmail.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28USB: cdc-acm: fix device unregistrationJohan Hovold
commit cb25505fc604292c70fc02143fc102f54c8595f0 upstream. Unregister tty device in disconnect as is required by the USB stack. By deferring unregistration to when the last tty reference is dropped, the parent interface device can get unregistered before the child resulting in broken hotplug events being generated when the tty is finally closed: KERNEL[2290.798128] remove /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:3.1 (usb) KERNEL[2290.804589] remove /devices/pci0000:00/0000:00:1d.7/usb2/2-1 (usb) KERNEL[2294.554799] remove /2-1:3.1/tty/ttyACM0 (tty) The driver must deal with tty callbacks after disconnect by checking the disconnected flag. Specifically, further opens must be prevented and this is already implemented. Acked-by: Oliver Neukum <oneukum@suse.de> Cc: Oliver Neukum <oneukum@suse.de> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28USB: xhci: correctly enable interruptsHannes Reinecke
commit 00eed9c814cb8f281be6f0f5d8f45025dc0a97eb upstream. xhci has its own interrupt enabling routine, which will try to use MSI-X/MSI if present. So the usb core shouldn't try to enable legacy interrupts; on some machines the xhci legacy IRQ setting is invalid. v3: Be careful to not break XHCI_BROKEN_MSI workaround (by trenn) Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Oliver Neukum <oneukum@suse.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Frederik Himpe <fhimpe@vub.ac.be> Cc: David Haerdeman <david@hardeman.nu> Cc: Alan Stern <stern@rowland.harvard.edu> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reviewed-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28USB: xhci - fix bit definitions for IMAN registerDmitry Torokhov
commit f8264340e694604863255cc0276491d17c402390 upstream. According to XHCI specification (5.5.2.1) the IP is bit 0 and IE is bit 1 of IMAN register. Previously their definitions were reversed. Even though there are no ill effects being observed from the swapped definitions (because IMAN_IP is RW1C and in legacy PCI case we come in with it already set to 1 so it was clearing itself even though we were setting IMAN_IE instead of IMAN_IP), we should still correct the values. This patch should be backported to kernels as old as 2.6.36, that contain the commit 4e833c0b87a30798e67f06120cecebef6ee9644c "xhci: don't re-enable IE constantly". Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28x86-64: Fix the failure case in copy_user_handle_tail()CQ Tang
commit 66db3feb486c01349f767b98ebb10b0c3d2d021b upstream. The increment of "to" in copy_user_handle_tail() will have incremented before a failure has been noted. This causes us to skip a byte in the failure case. Only do the increment when assured there is no failure. Signed-off-by: CQ Tang <cq.tang@intel.com> Link: http://lkml.kernel.org/r/20130318150221.8439.993.stgit@phlsvslse11.ph.intel.com Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28clockevents: Don't allow dummy broadcast timersMark Rutland
commit a7dc19b8652c862d5b7c4d2339bd3c428bd29c4a upstream. Currently tick_check_broadcast_device doesn't reject clock_event_devices with CLOCK_EVT_FEAT_DUMMY, and may select them in preference to real hardware if they have a higher rating value. In this situation, the dummy timer is responsible for broadcasting to itself, and the core clockevents code may attempt to call non-existent callbacks for programming the dummy, eventually leading to a panic. This patch makes tick_check_broadcast_device always reject dummy timers, preventing this problem. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Jon Medhurst (Tixy) <tixy@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28nfsd: fix bad offset useKent Overstreet
commit e49dbbf3e770aa590a8a464ac4978a09027060b9 upstream. vfs_writev() updates the offset argument - but the code then passes the offset to vfs_fsync_range(). Since offset now points to the offset after what was just written, this is probably not what was intended Introduced by face15025ffdf664de95e86ae831544154d26c9c "nfsd: use vfs_fsync_range(), not O_SYNC, for stable writes". Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Reviewed-by: Zach Brown <zab@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28md/raid5: ensure sync and DISCARD don't happen at the same time.NeilBrown
commit f8dfcffd0472a0f353f34a567ad3f53568914d04 upstream. A number of problems can occur due to races between resync/recovery and discard. - if sync_request calls handle_stripe() while a discard is happening on the stripe, it might call handle_stripe_clean_event before all of the individual discard requests have completed (so some devices are still locked, but not all). Since commit ca64cae96037de16e4af92678814f5d4bf0c1c65 md/raid5: Make sure we clear R5_Discard when discard is finished. this will cause R5_Discard to be cleared for the parity device, so handle_stripe_clean_event() will not be called when the other devices do become unlocked, so their ->written will not be cleared. This ultimately leads to a WARN_ON in init_stripe and a lock-up. - If handle_stripe_clean_event() does clear R5_UPTODATE at an awkward time for resync, it can lead to s->uptodate being less than disks in handle_parity_checks5(), which triggers a BUG (because it is one). So: - keep R5_Discard on the parity device until all other devices have completed their discard request - make sure we don't try to have a 'discard' and a 'sync' action at the same time. This involves a new stripe flag to we know when a 'discard' is happening, and the use of R5_Overlap on the parity disk so when a discard is wanted while a sync is active, so we know to wake up the discard at the appropriate time. Discard support for RAID5 was added in 3.7, so this is suitable for any -stable kernel since 3.7. Reported-by: Jes Sorensen <Jes.Sorensen@redhat.com> Tested-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28MD RAID5: Avoid accessing gendisk or queue structs when not availableJonathan Brassow
commit e3620a3ad52609f64a2402e4b59300afb4b83b77 upstream. MD RAID5: Fix kernel oops when RAID4/5/6 is used via device-mapper Commit a9add5d (v3.8-rc1) added blktrace calls to the RAID4/5/6 driver. However, when device-mapper is used to create RAID4/5/6 arrays, the mddev->gendisk and mddev->queue fields are not setup. Therefore, calling things like trace_block_bio_remap will cause a kernel oops. This patch conditionalizes those calls on whether the proper fields exist to make the calls. (Device-mapper will call trace_block_bio_remap on its own.) This patch is suitable for the 3.8.y stable kernel. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28md/raid5: schedule_construction should abort if nothing to do.NeilBrown
commit ce7d363aaf1e28be8406a2976220944ca487e8ca upstream. Since commit 1ed850f356a0a422013846b5291acff08815008b md/raid5: make sure to_read and to_write never go negative. It has been possible for handle_stripe_dirtying to be called when there isn't actually any work to do. It then calls schedule_reconstruction() which will set R5_LOCKED on the parity block(s) even when nothing else is happening. This then causes problems in do_release_stripe(). So add checks to schedule_reconstruction() so that if it doesn't find anything to do, it just aborts. This bug was introduced in v3.7, so the patch is suitable for -stable kernels since then. Reported-by: majianpeng <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28watchdog: sp5100_tco: Remove code that may cause a boot failureTakahisa Tanaka
commit 18e4321276fcf083b85b788fee7cf15be29ed72a upstream. A problem was found on PC's with the SB700 chipset: The PC fails to load BIOS after running the 3.8.x kernel until the power is completely cut off. It occurs in all 3.8.x versions and the mainline version as of 2/4. The issue does not occur with the 3.7.x builds. There are two methods for accessing the watchdog registers. 1. Re-programming a resource address obtained by allocate_resource() to chipset. 2. Use the direct memory-mapped IO access. The method 1 can be used by all the chipsets (SP5100, SB7x0, SB8x0 or later). However, experience shows that only PC with the SB8x0 (or later) chipsets can use the method 2. This patch removes the method 1, because the critical problem was found. That's why the watchdog timer was able to be used on SP5100 and SB7x0 chipsets until now. Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1116835 Link: https://lkml.org/lkml/2013/2/14/271 Signed-off-by: Takahisa Tanaka <mc74hc00@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28watchdog: sp5100_tco: Set the AcpiMmioSel bitmask value to 1 instead of 2Takahisa Tanaka
commit 81fc933f176cd95f757bfc8a98109ef422598b79 upstream. The AcpiMmioSel bit is bit 1 in the AcpiMmioEn register, but the current sp5100_tco driver is using bit 2. See 2.3.3 Power Management (PM) Registers page 150 of the AMD SB800-Series Southbridges Register Reference Guide [1]. AcpiMmioEn - RW – 8/16/32 bits - [PM_Reg: 24h] Field Name Bits Default Description AcpiMMioDecodeEn 0 0b Set to 1 to enable AcpiMMio space. AcpiMMIoSel 1 0b Set AcpiMMio registers to be memory-mapped or IO-mapped space. 0: Memory-mapped space 1: I/O-mapped space The sp5100_tco driver expects zero as a value of AcpiMmioSel (bit 1). Fortunately, no problems were caused by this typo, because the default value of the undocumented misused bit 2 seems to be zero. However, the sp5100_tco driver should use the correct bitmask value. [1] http://support.amd.com/us/Embedded_TechDocs/45482.pdf Signed-off-by: Takahisa Tanaka <mc74hc00@gmail.com> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28IPoIB: Fix send lockup due to missed TX completionMike Marciniszyn
commit 1ee9e2aa7b31427303466776f455d43e5e3c9275 upstream. Commit f0dc117abdfa ("IPoIB: Fix TX queue lockup with mixed UD/CM traffic") attempts to solve an issue where unprocessed UD send completions can deadlock the netdev. The patch doesn't fully resolve the issue because if more than half the tx_outstanding's were UD and all of the destinations are RC reachable, arming the CQ doesn't solve the issue. This patch uses the IB_CQ_REPORT_MISSED_EVENTS on the ib_req_notify_cq(). If the rc is above 0, the UD send cq completion callback is called directly to re-arm the send completion timer. This issue is seen in very large parallel filesystem deployments and the patch has been shown to correct the issue. Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28ext4: fix data=journal fast mount/umount hangTheodore Ts'o
commit 2b405bfa84063bfa35621d2d6879f52693c614b0 upstream. In data=journal mode, if we unmount the file system before a transaction has a chance to complete, when the journal inode is being evicted, we can end up calling into jbd2_log_wait_commit() for the last transaction, after the journalling machinery has been shut down. Arguably we should adjust ext4_should_journal_data() to return FALSE for the journal inode, but the only place it matters is ext4_evict_inode(), and so to save a bit of CPU time, and to make the patch much more obviously correct by inspection(tm), we'll fix it by explicitly not trying to waiting for a journal commit when we are evicting the journal inode, since it's guaranteed to never succeed in this case. This can be easily replicated via: mount -t ext4 -o data=journal /dev/vdb /vdb ; umount /vdb ------------[ cut here ]------------ WARNING: at /usr/projects/linux/ext4/fs/jbd2/journal.c:542 __jbd2_log_start_commit+0xba/0xcd() Hardware name: Bochs JBD2: bad log_start_commit: 3005630206 3005630206 0 0 Modules linked in: Pid: 2909, comm: umount Not tainted 3.8.0-rc3 #1020 Call Trace: [<c015c0ef>] warn_slowpath_common+0x68/0x7d [<c02b7e7d>] ? __jbd2_log_start_commit+0xba/0xcd [<c015c177>] warn_slowpath_fmt+0x2b/0x2f [<c02b7e7d>] __jbd2_log_start_commit+0xba/0xcd [<c02b8075>] jbd2_log_start_commit+0x24/0x34 [<c0279ed5>] ext4_evict_inode+0x71/0x2e3 [<c021f0ec>] evict+0x94/0x135 [<c021f9aa>] iput+0x10a/0x110 [<c02b7836>] jbd2_journal_destroy+0x190/0x1ce [<c0175284>] ? bit_waitqueue+0x50/0x50 [<c028d23f>] ext4_put_super+0x52/0x294 [<c020efe3>] generic_shutdown_super+0x48/0xb4 [<c020f071>] kill_block_super+0x22/0x60 [<c020f3e0>] deactivate_locked_super+0x22/0x49 [<c020f5d6>] deactivate_super+0x30/0x33 [<c0222795>] mntput_no_expire+0x107/0x10c [<c02233a7>] sys_umount+0x2cf/0x2e0 [<c02233ca>] sys_oldumount+0x12/0x14 [<c08096b8>] syscall_call+0x7/0xb ---[ end trace 6a954cc790501c1f ]--- jbd2_log_wait_commit: error: j_commit_request=-1289337090, tid=0 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28ext4: use s_extent_max_zeroout_kb value as number of kbLukas Czerner
commit 4f42f80a8f08d4c3f52c4267361241885d5dee3a upstream. Currently when converting extent to initialized, we have to decide whether to zeroout part/all of the uninitialized extent in order to avoid extent tree growing rapidly. The decision is made by comparing the size of the extent with the configurable value s_extent_max_zeroout_kb which is in kibibytes units. However when converting it to number of blocks we currently use it as it was in bytes. This is obviously bug and it will result in ext4 _never_ zeroout extents, but rather always split and convert parts to initialized while leaving the rest uninitialized in default setting. Fix this by using s_extent_max_zeroout_kb as kibibytes. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28ext4: use atomic64_t for the per-flexbg free_clusters countTheodore Ts'o
commit 90ba983f6889e65a3b506b30dc606aa9d1d46cd2 upstream. A user who was using a 8TB+ file system and with a very large flexbg size (> 65536) could cause the atomic_t used in the struct flex_groups to overflow. This was detected by PaX security patchset: http://forums.grsecurity.net/viewtopic.php?f=3&t=3289&p=12551#p12551 This bug was introduced in commit 9f24e4208f7e, so it's been around since 2.6.30. :-( Fix this by using an atomic64_t for struct orlav_stats's free_clusters. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28usb-storage: add unusual_devs entry for Samsung YP-Z3 mp3 playerDmitry Artamonow
commit 29f86e66428ee083aec106cca1748dc63d98ce23 upstream. Device stucks on filesystem writes, unless following quirk is passed: echo 04e8:5136:m > /sys/module/usb_storage/parameters/quirks Add corresponding entry to unusual_devs.h Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28ext4: fix the wrong number of the allocated blocks in ext4_split_extent()Zheng Liu
commit 3a2256702e47f68f921dfad41b1764d05c572329 upstream. This commit fixes a wrong return value of the number of the allocated blocks in ext4_split_extent. When the length of blocks we want to allocate is greater than the length of the current extent, we return a wrong number. Let's see what happens in the following case when we call ext4_split_extent(). map: [48, 72] ex: [32, 64, u] 'ex' will be split into two parts: ex1: [32, 47, u] ex2: [48, 64, w] 'map->m_len' is returned from this function, and the value is 24. But the real length is 16. So it should be fixed. Meanwhile in this commit we use right length of the allocated blocks when get_reserved_cluster_alloc in ext4_ext_handle_uninitialized_extents is called. Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28jbd2: fix use after free in jbd2_journal_dirty_metadata()Jan Kara
commit ad56edad089b56300fd13bb9eeb7d0424d978239 upstream. jbd2_journal_dirty_metadata() didn't get a reference to journal_head it was working with. This is OK in most of the cases since the journal head should be attached to a transaction but in rare occasions when we are journalling data, __ext4_journalled_writepage() can race with jbd2_journal_invalidatepage() stripping buffers from a page and thus journal head can be freed under hands of jbd2_journal_dirty_metadata(). Fix the problem by getting own journal head reference in jbd2_journal_dirty_metadata() (and also in jbd2_journal_set_triggers() which can possibly have the same issue). Reported-by: Zheng Liu <gnehzuil.liu@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28cifs: ignore everything in SPNEGO blob after mechTypesJeff Layton
commit f853c616883a8de966873a1dab283f1369e275a1 upstream. We've had several reports of people attempting to mount Windows 8 shares and getting failures with a return code of -EINVAL. The default sec= mode changed recently to sec=ntlmssp. With that, we expect and parse a SPNEGO blob from the server in the NEGOTIATE reply. The current decode_negTokenInit function first parses all of the mechTypes and then tries to parse the rest of the negTokenInit reply. The parser however currently expects a mechListMIC or nothing to follow the mechTypes, but Windows 8 puts a mechToken field there instead to carry some info for the new NegoEx stuff. In practice, we don't do anything with the fields after the mechTypes anyway so I don't see any real benefit in continuing to parse them. This patch just has the kernel ignore the fields after the mechTypes. We'll probably need to reinstate some of this if we ever want to support NegoEx. Reported-by: Jason Burgess <jason@jacknife2.dns2go.com> Reported-by: Yan Li <elliot.li.tech@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28cifs: delay super block destruction until all cifsFileInfo objects are goneMateusz Guzik
commit 24261fc23db950951760d00c188ba63cc756b932 upstream. cifsFileInfo objects hold references to dentries and it is possible that these will still be around in workqueues when VFS decides to kill super block during unmount. This results in panics like this one: BUG: Dentry ffff88001f5e76c0{i=66b4a,n=1M-2} still in use (1) [unmount of cifs cifs] ------------[ cut here ]------------ kernel BUG at fs/dcache.c:943! [..] Process umount (pid: 1781, threadinfo ffff88003d6e8000, task ffff880035eeaec0) [..] Call Trace: [<ffffffff811b44f3>] shrink_dcache_for_umount+0x33/0x60 [<ffffffff8119f7fc>] generic_shutdown_super+0x2c/0xe0 [<ffffffff8119f946>] kill_anon_super+0x16/0x30 [<ffffffffa036623a>] cifs_kill_sb+0x1a/0x30 [cifs] [<ffffffff8119fcc7>] deactivate_locked_super+0x57/0x80 [<ffffffff811a085e>] deactivate_super+0x4e/0x70 [<ffffffff811bb417>] mntput_no_expire+0xd7/0x130 [<ffffffff811bc30c>] sys_umount+0x9c/0x3c0 [<ffffffff81657c19>] system_call_fastpath+0x16/0x1b Fix this by making each cifsFileInfo object hold a reference to cifs super block, which implicitly keeps VFS super block around as well. Signed-off-by: Mateusz Guzik <mguzik@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Reported-and-Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Steve French <sfrench@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28drm/radeon/benchmark: make sure bo blit copy exists before using itAlex Deucher
commit fa8d387dc3f62062a6b4afbbb2a3438094fd8584 upstream. Fixes a segfault on asics without a blit callback. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=62239 Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28drm/radeon: fix backend map setup on 1 RB trinity boardsAlex Deucher
commit 8f612b23a17dce86fef75407e698de6243cc99a1 upstream. Need to adjust the backend map depending on which RB is enabled. This is the trinity equivalent of: f7eb97300832f4fe5fe916c5d84cd2e25169330e May fix: https://bugs.freedesktop.org/show_bug.cgi?id=57919 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28drm/radeon: fix S/R on VM systems (cayman/TN/SI)Alex Deucher
commit fa3daf9aa74a3ac1c87d8188a43d283d06720032 upstream. We weren't properly tearing down the VM sub-alloctor on suspend leading to bogus VM PTs on resume. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=60439 Reviewed-by: Christian König <christian.koenig@amd.com> Tested-by: Dmitry Cherkasov <Dmitrii.Cherkasov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28drm/radeon: add support for Richland APUsAlex Deucher
commit e4d170633fde379f39a90f8a5e7eb619b5d1144d upstream. Richland APUs are a new version of the Trinity APUs with performance and power management improvements. Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28drm/radeon: add Richland pci idsAlex Deucher
commit b75bbaa038ffc426e88ea3df6c4ae11834fc3e4f upstream. Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28drm/mgag200: Bug fix: Modified pll algorithm for EH projectJulia Lemire
commit 260b3f1291a75a580d22ce8bfb1499c617272716 upstream. While testing the mgag200 kms driver on the HP ProLiant Gen8, a bug was seen. Once the bootloader would load the selected kernel, the screen would go black. At first it was assumed that the mgag200 kms driver was hanging. But after setting up the grub serial output, it was seen that the driver was being loaded properly. After trying serval monitors, one finaly displayed the message "Frequency Out of Range". By comparing the kms pll algorithm with the previous mgag200 xorg driver pll algorithm, discrepencies were found. Once the kms pll algorithm was modified, the expected pll values were produced. This fix was tested on several monitors of varying native resolutions. Signed-off-by: Julia Lemire <jlemire@matrox.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28dm verity: avoid deadlockMikulas Patocka
commit 3b6b7813b198b578aa7e04e4047ddb8225c37b7f upstream. A deadlock was found in the prefetch code in the dm verity map function. This patch fixes this by transferring the prefetch to a worker thread and skipping it completely if kmalloc fails. If generic_make_request is called recursively, it queues the I/O request on the current->bio_list without making the I/O request and returns. The routine making the recursive call cannot wait for the I/O to complete. The deadlock occurs when one thread grabs the bufio_client mutex and waits for an I/O to complete but the I/O is queued on another thread's current->bio_list and is waiting to get the mutex held by the first thread. The fix recognises that prefetching is not essential. If memory can be allocated, it queues the prefetch request to the worker thread, but if not, it does nothing. Signed-off-by: Paul Taysom <taysom@chromium.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28dm thin: fix discard corruptionJoe Thornber
commit f046f89a99ccfd9408b94c653374ff3065c7edb3 upstream. Fix a bug in dm_btree_remove that could leave leaf values with incorrect reference counts. The effect of this was that removal of a shared block could result in the space maps thinking the block was no longer used. More concretely, if you have a thin device and a snapshot of it, sending a discard to a shared region of the thin could corrupt the snapshot. Thinp uses a 2-level nested btree to store it's mappings. This first level is indexed by thin device, and the second level by logical block. Often when we're removing an entry in this mapping tree we need to rebalance nodes, which can involve shadowing them, possibly creating a copy if the block is shared. If we do create a copy then children of that node need to have their reference counts incremented. In this way reference counts percolate down the tree as shared trees diverge. The rebalance functions were incrementing the children at the appropriate time, but they were always assuming the children were internal nodes. This meant the leaf values (in our case packed block/flags entries) were not being incremented. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28ARM: tegra: fix register address of slink controllerLaxman Dewangan
commit 57471c8d3c22873f70813820e6b4d2d1fea9629d upstream. Fix typo on register address of slink3 controller where register address is wrongly set as 0x7000d480 but it is 0x7000d800. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28target/file: Bump FD_MAX_SECTORS to 2048 to handle 1M sized I/OsNicholas Bellinger
commit f002a24388cc460c8a9be7d446a9871f7c9d52b6 upstream. This patch bumps the default FILEIO backend FD_MAX_SECTORS value from 1024 -> 2048 in order to allow block_size=512 to handle 1M sized I/Os. The current default rejects I/Os larger than 512K in sbc_parse_cdb(): [12015.915146] SCSI OP 2ah with too big sectors 1347 exceeds backend hw_max_sectors: 1024 [12015.977744] SCSI OP 2ah with too big sectors 2048 exceeds backend hw_max_sectors: 1024 This issue is present in >= v3.5 based kernels, introduced after the removal of se_task logic. Reported-by: Viljami Ilola <azmulx@netikka.fi> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28target/iscsi: Fix mutual CHAP auth on big-endian archesAndy Grover
commit 7ac9ad11b2a5cf77a92b58ee6b672ad2fa155eb1 upstream. See https://bugzilla.redhat.com/show_bug.cgi?id=916290 Used a temp var since we take its address in sg_init_one. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28mqueue: sys_mq_open: do not call mnt_drop_write() if read-onlyVladimir Davydov
commit 38d78e587d4960d0db94add518d27ee74bad2301 upstream. mnt_drop_write() must be called only if mnt_want_write() succeeded, otherwise the mnt_writers counter will diverge. mnt_writers counters are used to check if remounting FS as read-only is OK, so after an extra mnt_drop_write() call, it would be impossible to remount mqueue FS as read-only. Besides, on umount a warning would be printed like this one: ===================================== [ BUG: bad unlock balance detected! ] 3.9.0-rc3 #5 Not tainted ------------------------------------- a.out/12486 is trying to release lock (sb_writers) at: mnt_drop_write+0x1f/0x30 but there are no more locks to release! Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Doug Ledford <dledford@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28drivers/video/ep93xx-fb.c: include <linux/io.h> for devm_ioremap()H Hartley Sweeten
commit e66b05873a7a76afc569da6382509471cba8d5ff upstream. Commit be8678149701 ("drivers/video/ep93xx-fb.c: use devm_ functions") introduced a build error: drivers/video/ep93xx-fb.c: In function 'ep93xxfb_probe': drivers/video/ep93xx-fb.c:532: error: implicit declaration of function 'devm_ioremap' drivers/video/ep93xx-fb.c:533: warning: assignment makes pointer from integer without a cast Include <linux/io.h> to pickup the declaration of 'devm_ioremap'. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Acked-by: Ryan Mallon <rmallon@gmail.com> Cc: Damien Cassou <damien.cassou@lifl.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28mm/hugetlb: fix total hugetlbfs pages count when using memory overcommit ↵Wanpeng Li
accouting commit d00285884c0892bb1310df96bce6056e9ce9b9d9 upstream. hugetlb_total_pages is used for overcommit calculations but the current implementation considers only the default hugetlb page size (which is either the first defined hugepage size or the one specified by default_hugepagesz kernel boot parameter). If the system is configured for more than one hugepage size, which is possible since commit a137e1cc6d6e ("hugetlbfs: per mount huge page sizes") then the overcommit estimation done by __vm_enough_memory() (resp. shown by meminfo_proc_show) is not precise - there is an impression of more available/allowed memory. This can lead to an unexpected ENOMEM/EFAULT resp. SIGSEGV when memory is accounted. Testcase: boot: hugepagesz=1G hugepages=1 the default overcommit ratio is 50 before patch: egrep 'CommitLimit' /proc/meminfo CommitLimit: 55434168 kB after patch: egrep 'CommitLimit' /proc/meminfo CommitLimit: 54909880 kB [akpm@linux-foundation.org: coding-style tweak] Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Hillf Danton <dhillf@gmail.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28drivers/rtc/rtc-at91rm9200.c: use a variable for storing IMRNicolas Ferre
commit 0ef1594c017521ea89278e80fe3f80dafb17abde upstream. On some revisions of AT91 SoCs, the RTC IMR register is not working. Instead of elaborating a workaround for that specific SoC or IP version, we simply use a software variable to store the Interrupt Mask Register and modify it for each enabling/disabling of an interrupt. The overhead of this is negligible anyway. The interrupt mask register (IMR) for the RTC is broken on the AT91SAM9x5 sub-family of SoCs (good overview of the members here: http://www.eewiki.net/display/linuxonarm/AT91SAM9x5 ). The "user visible effect" is the RTC doesn't work. That sub-family is less than two years old and only has devicetree (DT) support and came online circa lk 3.7 . The dust is yet to settle on the DT stuff at least for AT91 SoCs (translation: lots of stuff is still broken, so much that it is hard to know where to start). The fix in the patch is pretty simple: just shadow the silicon IMR register with a variable in the driver. Some older SoCs (pre-DT) use the the rtc-at91rm9200 driver (e.g. obviously the AT91RM9200) and they should not be impacted by the change. There shouldn't be a large volume of interrupts associated with a RTC. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reported-by: Douglas Gilbert <dgilbert@interlog.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-16 03:56:17 +0000