Age | Commit message (Collapse) | Author |
|
This patch:
- makes .gitignore files visible to git
- makes arch/x86/kernel/vsyscall_32.lds and arch/i386/boot invisible
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Almost identical except for the extra DR_LEN_8 and the different
DR_CONTROL_RESERVED defines.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Conflicts:
include/asm-x86/Kbuild
|
|
32bit has an extra UNW_FP define, which does not hurt.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Mostly the same. Make the few exceptions conditional.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Conflicts:
include/asm-x86/types_32.h
|
|
Same file, except for whitespace, comment formatting.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Same file, except for the 64bit PREAMBLE_SIZE define.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Same file, except for whitespace, comment formatting and the
.long/.quad delta which can be solved by a define.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Same file, except for the extra 64bit MAP_32BIT define, which does not hurt
for 32 bit compiles.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The 32bit D(n) debug addon can be made exclusive for 32 bit compiles.
Otherwise all the same.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The 64 bit variant has additional function prototypes which do no harm
for 32 bit.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Same file, except for whitespace and comment formatting.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Same file, except for whitespace, comment formatting and:
32-bit: if((unsigned int) addr >= (unsigned int) high_memory)
64-bit: if((unsigned long) addr >= (unsigned long) high_memory)
where the latter can be used safely for both.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Conflicts:
include/asm-x86/floppy_32.h
include/asm-x86/floppy_64.h
|
|
commit 554d284ba90bc2306c31e5363789f05c320969c3 added _GPF_NORETRY
to floppy_64.h to prevent OOM killer on floppy DMA allocations.
Apply the same to the 32 bit variant.
Found during the attempt to unify the _32/_64 variants. Seperate commit
to document the resulting code change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Same file, except for whitespace, comment formatting and the two variants
of fb_is_primary_device()
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Same file, except for whitespace, comment formatting and:
32-bit: unsigned long *virt_addr = va;
64-bit: unsigned int *virt_addr = va;
Both can be safely replaced by:
u32 i, *virt_addr = va;
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Unification, so we have these things in one file.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Same file, except for whitespace, comment formatting and the extra
function prototype usc_tsc_delay() in _32.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Same file, except for whitespace, comment formatting and the extra
defines in _64, which are conditional on VSMP anyway.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Same file, except for whitespace, comment formatting and the extra
DEBUG_PAGE_ALLOC function in _32.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Same file, except for whitespace, comment formatting and the
AT_SYSINFO define for 32bit
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Same file, except for whitespace, comment formatting and the
usage of wbinvd() instead of asm volatile("wbinvd":::"memory"), which is
the same.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Scripted unification.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Merge errno.h, resource.h, rtc.h, sections.h, serial.h and sockios.h,
where i386 and x86_64 have no or only trivial comment/include guard
differences.
Build tested on both 32-bit and 64-bit, and booted on 64-bit.
[tglx: fixup Kbuild as well]
Signed-off-by: Roland Dreier <roland@digitalvampire.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Merge 32/64-bit headers that simply redirect to asm-generic
[tglx: fixup Kbuild as well]
Signed-off-by: Brian Gerst <bgerst@didntduck.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
I can't see the reason ". = VDSO_PRELINK + 0x900;" was ever there in
the linker script for the x86_64 vDSO. I can't find anything that
depends on this magic offset, or that should care at all about the
particular location of of the .data section (all from vvar.c) in the
vDSO image. If it is really desireable to place .data at 0x900, then it
should be after all the other sections so they fill in the space up to
0x900.
This removes the 0x900 magic and cleans up the output sections generally
in the vDSO linker script. This saves a few hundred bytes in the size
of the vDSO file, bringing it back well under 4kb total so that its vma
only needs one page.
Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
convert mm_context_t semaphore to a mutex.
Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Add support for and use the multi-byte NOPs recently documented to be
available on all PentiumPro and later processors.
This patch only applies cleanly on top of the "x86: misc.
constifications" patch sent earlier.
[ tglx: arch/x86 adaptation ]
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
arch/x86/kernel/alternative.c | 23 ++++++++++++++++++++++-
include/asm-x86/processor_32.h | 22 ++++++++++++++++++++++
include/asm-x86/processor_64.h | 22 ++++++++++++++++++++++
3 files changed, 66 insertions(+), 1 deletion(-)
|
|
Spotted by Chuck Ebbert
[ tglx: arch/x86 adaptation ]
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Oleg Nesterov pointed out that the set_fs() calls in setup_frame()
and setup_rt_frame() were superfluous.
[ tglx: arch/x86 adaptation ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Chuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
[ tglx: arch/x86 adaptation ]
Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
[ tglx: arch/x86 adaptation ]
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Normally we will have two segment not connected pin pin0, and pin after
15...
So we need to print out "not connected\n" for previous segment, before
printing out connected pins info...
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
improve early fault output.
old format:
Int 14: CR2 010001e3 err 00000002 EIP c011f2f9 CS 00000060 flags 00010046
Stack: c073695e c0791c10 00000000 ffffffff 00000000 01000000 00001000 c0791c10
new format:
BUG: Int 14: CR2 010001e3
EDI c1000000 ESI c0693c10 EBP c0637f9c ESP c0637f08
EBX 00000000 EDX 0000000e ECX 00000000 EAX 010001e3
err 00000002 EIP c0123119 CS 00000060 flg 00010046
Stack: c064d589 c0693000 00000000 c0637f60 00c001e3 01000000 00038000 00000163
00000000 00000163 00000000 ffffffff 00038000 00000000 00000000 00001000
00001000 00000000 c0637f88 c06509be c0a2ae60 00001000 00001000 00000000
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
handler
It doesn't seem to make sense to hide these, even if their counts
can't change at the point in time they're being displayed.
[ tglx: arch/x86 adaptation ]
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Add missing IRQs and IRQ descriptions to /proc/interrupts.
/proc/interrupts is most useful when it displays every IRQ vector in use by
the system, not just those somebody thought would be interesting.
This patch inserts the following vector displays to the i386 and x86_64
platforms, as appropriate:
rescheduling interrupts
TLB flush interrupts
function call interrupts
thermal event interrupts
threshold interrupts
spurious interrupts
A threshold interrupt occurs when ECC memory correction is occuring at too
high a frequency. Thresholds are used by the ECC hardware as occasional
ECC failures are part of normal operation, but long sequences of ECC
failures usually indicate a memory chip that is about to fail.
Thermal event interrupts occur when a temperature threshold has been
exceeded for some CPU chip. IIRC, a thermal interrupt is also generated
when the temperature drops back to a normal level.
A spurious interrupt is an interrupt that was raised then lowered by the
device before it could be fully processed by the APIC. Hence the apic sees
the interrupt but does not know what device it came from. For this case
the APIC hardware will assume a vector of 0xff.
Rescheduling, call, and TLB flush interrupts are sent from one CPU to
another per the needs of the OS. Typically, their statistics would be used
to discover if an interrupt flood of the given type has been occuring.
AK: merged v2 and v4 which had some more tweaks
AK: replace Local interrupts with Local timer interrupts
AK: Fixed description of interrupt types.
[ tglx: arch/x86 adaptation ]
[ mingo: small cleanup ]
Signed-off-by: Joe Korty <joe.korty@ccur.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Tim Hockin <thockin@hockin.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Typically the oops first lines look like this:
BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000
printing eip:
c049dfbd
*pde = 00000000
Oops: 0002 [#1]
PREEMPT SMP
...
Such output is gained with some ugly if (!nl) printk("\n"); code and
besides being a waste of lines, this is also annoying to read. The
following output looks better (and it is how it looks on x86_64):
BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000
printing eip: c049dfbd *pde = 00000000
Oops: 0002 [#1] PREEMPT SMP
...
[ tglx: arch/x86 adaptation ]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Some BIOSes set the C1E flag only on the second core. Print a warning so
the Firmware Toolkit can check for it.
mingo: fix C1E build bug on 32-bit
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Call cache_add_dev() from cache_sysfs_init() explicitly, instead of
referencing the CPU notifier callback directly from generic startup
code. Looks cleaner (to me at least) this way, and also makes it
possible to use other tricks to replace __cpuinit{data} annotations, as
recently discussed on this list.
Signed-off-by: Satyam Sharma <satyam@infradead.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The dmi const-ification missed acer_cpu_freq_pst. Fix it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The additional struct member of user_desc can be made conditional for
64 bit compiles.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Aside of the register defines the content can be shared.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Merge the files together.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This adds a const to the definitions vvar.c makes, so that the vdso_*
variables go into .rodata instead of .data. This is essentially a
cosmetic change, just giving the section headers in the vDSO file more
pleasing flags. These variables are read-only from the perspective of
the vDSO itself and user mode, even though the contents of the DSO image
were adjusted at boot.
Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Now that we check for translation enabled/disabled based on the presence
of the IOMMU translation table, we can get rid of translate_phb.
Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
- Fix this:
include/asm/io.h: In function `memcpy_fromio':
include/asm/io.h:208: warning: passing argument 2 of `__memcpy' discards qualifiers from pointer target type
- Clean up code a bit
Reported-by: Uwe Bugla <uwe.bugla@gmx.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
"extern inline" will have different semantics with gcc 4.3.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Andrey Panin <pazke@donpac.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
In x86_64 and i386 architectures most arrays that are sized using
NR_CPUS lay in local memory on node 0. Not only will most (99%?) of the
systems not use all the slots in these arrays, particularly when NR_CPUS
is increased to accommodate future very high cpu count systems, but a
number of cache lines are passed unnecessarily on the system bus when
these arrays are referenced by cpus on other nodes.
Typically, the values in these arrays are referenced by the cpu
accessing it's own values, though when passing IPI interrupts, the cpu
does access the data relevant to the targeted cpu/node. Of course, if
the referencing cpu is not on node 0, then the reference will still
require cross node exchanges of cache lines. A common use of this is
for an interrupt service routine to pass the interrupt to other cpus
local to that node.
Ideally, all the elements in these arrays should be moved to the per_cpu
data area. In some cases (such as x86_cpu_to_apicid) the array is
referenced before the per_cpu data areas are setup. In this case, a
static array is declared in the __initdata area and initialized by the
booting cpu (BSP). The values are then moved to the per_cpu area after
it is initialized and the original static array is freed with the rest
of the __initdata.
This patch:
Fix four instances where cpu_to_node is referenced by array instead of
via the cpu_to_node macro. This is preparation to moving it to the
per_cpu data area.
Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
sys_iopl is long gone and there is no reason to declare
sys_rt_sigaction here.
Remove it all together and fix the whitespace mess as well.
It's worth the trouble: 25897 -> 21337 bytes, the win is
larger than the memory of my first computer :)
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
It needs to be automatic. The HPET legacy interrupt mode disconnects
the RTC interrupt and connects the interrupt of the second HPET channel.
[ tglx: arch/x86 adaptation and comment fixup]
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
.. as they're, with a single exception, never written to.
[ tglx: arch/x86 adaptation ]
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|