summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-05-05rtlwifi: rtl8192se: Merge table routinesChaoming Li
Merge routines table.c and table.h for RTL8192SE. Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-05rtlwifi: rtl8192se: Merge main (sw) routinesChaoming Li
Merge routines sw.c and sw.h for RTL8192SE. Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-05rtlwifi: rtl8192se: Merge rf routinesChaoming Li
Merge routines rf.c and rf.h for RTL8192SE. Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-05rtlwifi: rtl8192se: Merge register definitionsChaoming Li
Merge routines reg.h for RTL8192SE. Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-05rtlwifi: rtl8192se: Merge phy routinesChaoming Li
Merge routines phy.c and phy.h for RTL8192SE. Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-05rtlwifi: rtl8192se: Merge led routinesChaoming Li
Merge routines led.c and led.h for RTL8192SE. Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-05rtlwifi: rtl8192se: Merge hardware routinesChaoming Li
Merge routines hw.c and hw.h for RTL8192SE. Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-05rtlwifi: rtl8192se: Merge firmware routinesChaoming Li
Merge routines fw.c and fw.h for RTL8192SE. In addition, make changes to rtlwifi/wifi.h to support RTL8192SE. Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-05rtlwifi: rtl8192se: Merge dynamic management routinesChaoming Li
Merge routines dm.c and dm.h for RTL8192SE. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-05rtlwifi: rtl8192se: Merge def.hChaoming Li
Introduce routine def.h for rtl8192se. Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-05mac80211: Postpond ps timer if tx is stopped by othersRajkumar Manoharan
Whenever the driver's queue depth reaches the max, the queues are stopped by the driver till the driver can accept the frames. At the mean time dynamic_ps_timer can be expired due to not receiving packet from upper layer which could restart the transmission at the end of ps work. Due to the mismatch with driver state, mac80211 is unneccesarity buffering all the frames till the driver wakes up the queue. Check whether there is no transmit or the tx queues were stopped by some reasons. If any of the queue was stopped, the postpond ps timer and do not restart netif_tx. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-05mac80211: set TID of internal mgmt packets to 7Arik Nemtsov
The queue mapping of internal mgmt packets is set to VO. Set the TID value to match the queue mapping. Otherwise drivers that only look at the TID might get confused. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-05ath9k_hw: remove aggregation protection modeMohammed Shafi Shajakhan
when aggregation protection mode is enabled the hardware needs to send RTS/CTS for each HT frame. Currently its disabled so remove the unused call backs. Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-05libertas: remove tx_timeout handlerDaniel Drake
As described at http://marc.info/?l=linux-netdev&m=130428493104730&w=2 libertas frequently generates spurious tx timeouts, because the tx queue is brought down for extended periods during scanning. The net layer takes a look and incorrectly assumes the queue has been down for several seconds, and generates a tx_timeout. One way to fix this is to bump the trans_start counter while scanning so that the network layer knows that the device is still alive, but I think the tx_timeout handler is implemented wrongly here and not of any real use, so I vote to remove it. As explained at http://marc.info/?l=linux-wireless&m=130430311115755&w=2 the watchdog is primarily meant to deal with lockup on the hardware TX path (detected by the tx queue being stopped for an extended period of time), but this is unlikely to happen with libertas. In this case, the tx queue is stopped only while waiting for lbs_thread to send the queued frame to the driver, and lbs_thread wakes up the queue immediately after, even if the frame could not be sent correctly. So, the only hardware-related possibility that this catches is if hw_host_to_card hangs - this is something I have never seen. And if it were to happen, nothing done by lbs_tx_timeout would actually wake up lbs_thread any quicker than otherwise. Removing this oddly-behaving spuriously-firing tx_timeout handler should fix an occasional kernel crash during resume (http://dev.laptop.org/ticket/10748) Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-05mac80211: use wake_queue to restart trasmitRajkumar Manoharan
netif_tx_start_all_queues is used to allow the upper layer to transmit frames but it does not restart transmission. To restart the trasmission use netif_tx_wake_all_queues. Not doing so, sometimes stalls the transmission and the application has to be restarted to proceed further. This issue was originally found while sending udp traffic in higer bandwidth in open environment without bgscan. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-05ath9k: Fix drain txq failure in flushRajkumar Manoharan
While draining the txq in flush, the buffers can be added into the tx queue by tx_tasklet which leads to unneccesary chip reset. This issue was originially found with AR9382 and running heavy uplink udp traffic with higher bandwidth and doing frequent bgscan. Cc: stable@kernel.org Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-05Merge branch 'for-linville' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx
2011-05-05mac80211: Fix a warning due to skipping tailroom reservation for IVMohammed Shafi Shajakhan
The devices that require IV generation in software need tailroom reservation for ICVs used in TKIP or WEP encryptions. Currently, decision to skip the tailroom reservation in the tx path was taken only on whether driver wants MMIC to be generated in software or not. Following patch appends IV generation check for such decisions and fixes the following warning. WARNING: at net/mac80211/wep.c:101 ieee80211_wep_add_iv+0x56/0xf3() Hardware name: 64756D6 Modules linked in: ath9k ath9k_common ath9k_hw Pid: 0, comm: swapper Tainted: G W 2.6.39-rc5-wl Call Trace: [<c102fd29>] warn_slowpath_common+0x65/0x7a [<c1465c4e>] ? ieee80211_wep_add_iv+0x56/0xf3 [<c102fd4d>] warn_slowpath_null+0xf/0x13 [<c1465c4e>] ieee80211_wep_add_iv+0x56/0xf3 [<c1466007>] ieee80211_crypto_wep_encrypt+0x63/0x88 [<c1478bf3>] ieee80211_tx_h_encrypt+0x2f/0x63 [<c1478cba>] invoke_tx_handlers+0x93/0xe1 [<c1478eda>] ieee80211_tx+0x4b/0x6d [<c147907c>] ieee80211_xmit+0x180/0x188 [<c147779d>] ? ieee80211_skb_resize+0x95/0xd9 [<c1479edf>] ieee80211_subif_start_xmit+0x64f/0x668 [<c13956fc>] dev_hard_start_xmit+0x368/0x48c [<c13a8bd6>] sch_direct_xmit+0x4d/0x101 [<c1395ae1>] dev_queue_xmit+0x2c1/0x43f [<c13a74a2>] ? eth_header+0x1e/0x90 [<c13a7400>] ? eth_type_trans+0x91/0xc2 [<c13a7484>] ? eth_rebuild_header+0x53/0x53 [<c139f079>] neigh_resolve_output+0x223/0x27e [<c13c6b23>] ip_finish_output2+0x1d4/0x1fe [<c13c6bc6>] ip_finish_output+0x79/0x7d [<c13c6cbe>] T.1075+0x43/0x48 [<c13c6e6e>] ip_output+0x75/0x7b [<c13c4970>] dst_output+0xc/0xe [<c13c62c9>] ip_local_out+0x17/0x1a [<c13c67bb>] ip_queue_xmit+0x2aa/0x2f8 [<c138b742>] ? sk_setup_caps+0x21/0x92 [<c13d95ea>] ? __tcp_v4_send_check+0x7e/0xb7 [<c13d5d2e>] tcp_transmit_skb+0x6a1/0x6d7 [<c13d533b>] ? tcp_established_options+0x20/0x8b [<c13d6f28>] tcp_retransmit_skb+0x43a/0x527 [<c13d8d6d>] tcp_retransmit_timer+0x32e/0x45d [<c13d8f23>] tcp_write_timer+0x87/0x16c [<c103a030>] run_timer_softirq+0x156/0x1f9 [<c13d8e9c>] ? tcp_retransmit_timer+0x45d/0x45d [<c1034d65>] __do_softirq+0x97/0x14a [<c1034cce>] ? irq_enter+0x4d/0x4d Cc: Yogesh Powar <yogeshp@marvell.com> Reported-by: Fabio Rossi <rossi.f@inwind.it> Tested-by: Fabio Rossi <rossi.f@inwind.it> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-02mwifiex: fix missing tsf_val TLVBing Zhao
In mwifiex_cmd_append_tsf_tlv(), two tsf_val TLVs should be filled in the buffer and then sent to firmware. The missing first TLV for tsf_val is added back in this patch. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-02rtlwifi: Fix typo in pci.cLarry Finger
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-02rt2x00: Add autowake support for USB hardwareIvo van Doorn
The USB drivers don't support automatically waking up when in powersaving mode, add a work object which will wakeup the device in time to receive the next beacon. Based on that beacon, we either go back into powersaving mode, or we remain awake to receive the buffered frames for our station. Some part of the code, especially rt2x00lib_find_ie and rt2x00lib_rxdone_check_ps are inspired on the code from carl9170. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-02rt2x00: Introduce capability flag for Bluetooth co-existence.Gertjan van Wingerde
Use flag instead of re-reading the eeprom every time. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-02rt2x00: Streamline rt2800 eeprom initialisations.Gertjan van Wingerde
In rt2800lib.c the rt2800_init_eeprom function the same eeprom words were read multiple times, due to inefficient ordering of the eeprom checks. Reorder the checks so that each EEPROM word only has to be read once. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-02rt2x00: Fix optimize register access for rt2800pciIvo van Doorn
The patch rt2x00: Optimize register access in rt2800pci from Helmut Schaa missed one register call, namely the rt2800_register_multiwrite which should be changed to rt2x00pci_register_multiwrite. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-02rt2x00: Optimize TX_STA_FIFO register readingIvo van Doorn
Add recycling functionality to rt2x00usb_register_read_async. When the callback function returns true, resubmit the urb to read the register again. This optimizes the rt2800usb driver when multiple TX status reports are pending in the register, because now we don't need to allocate the rt2x00_async_read_data and urb structure each time. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-02rt2x00: Reduce tx status reading timeoutIvo van Doorn
When no TX status was available, the default timeout of 20ms is a bit high. The frame is highly likely already send out, so the TX status should be available within only a few milliseconds. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-02mac80211: consolidate MIC failure report handlingChristian Lamparter
Currently, mac80211 handles MIC failures differently depending on whenever they are detected by the stack's own software crypto or when are handed down from the driver. This patch tries to unify both by moving the special branch out of mac80211 rx hotpath and into into the software crypto part. This has the advantage that we can run a few more sanity checks on the data and verify if the key type was TKIP. This is very handy because several devices generate false postive MIC failure reports. Like carl9170, ath9k and wl12xx: <http://www.spinics.net/lists/linux-wireless/msg68494.html> "mac80211: report MIC failure for truncated packets in AP mode" Cc: Luciano Coelho <coelho@ti.com> Cc: Arik Nemtsov <arik@wizery.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-02ssb: cc: prepare clockmode support for cores rev 10+Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-02Revert "wl12xx: support FW TX inactivity triggers"Luciano Coelho
This reverts commit 47684808fd89d6809c0886e06f8ac324252499d8. Conflicts: drivers/net/wireless/wl12xx/conf.h drivers/net/wireless/wl12xx/main.c
2011-05-02wl12xx: export driver state to debugfsArik Nemtsov
By reading the "driver_state" debugfs value we get all the important state information from the wl12xx driver. This helps testing and debugging, particularly in situations where the driver seems "stuck". Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: fix race condition during recovery in AP modeArik Nemtsov
When operating as AP, the TX queues are not stopped when we start recovery. mac80211 is notified only after the fact. When there is pending TX, it will be queued even after the FW is down. This leads to situations where the TX queues are stopped (because of the TX-watermark mechanism), and are never woken up when we return from recovery. Fix this by explicitly stopping the TX queues when before initiating recovery. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: add debugfs entry for starting recoveryArik Nemtsov
This entry is useful for debugging the driver state machine during recovery. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: AP-mode - reconfigure templates after basic rates changeArik Nemtsov
When there's a change in the basic rates of the AP, reconfigure relevant templates with the new rates. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: AP-mode - overhaul rate policy configurationArik Nemtsov
Use the minimal rate configured in the basic rates set as the AP broadcast and multicast rate. The minimal rate is used to ensure weak links can still communicate. When the basic rates contains at least one OFDM rate, configure all unicast TX rates to OFDM only. Unify rate configuration on initialization and on change notification into a single function. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: print firmware program counter during recoveryArik Nemtsov
When performing recovery, print the firmware version and program counter (by reading the SCR_PAD4 register). The value of the firmware program counter during assert can be useful for debugging. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: schedule recovery on command timeoutArik Nemtsov
We use a long timeout (2 seconds) when sending commands to the FW. When a command times out, it means the FW is stuck, and we should commence recovery. This should make recovery times shorter as we'll recover on the first timeout indication. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: AP-mode - disable beacon filtering on start upArik Nemtsov
New AP-mode FWs filter external beacons by default. Disable this filtering on start up so we can properly configure ERP protection. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: use wiphy values for setting rts, frag thresholds on initArik Nemtsov
Use the wiphy RTS and fragmentation thresholds for initializing the FW when possible. This mitigates a bug where previously set values are forgotten after interface down/up. Add checks before settings these values to ensure they are valid. Use default values when invalid thresholds are configured. Update the default RTS threshold to the maximum value given by the specification. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: add BT-coexistance for APArik Nemtsov
Initialize AP specific BT coexitance parameters to default values and enable them in AP mode. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: strict_stroul introduced converted to kstrtoulLuciano Coelho
One new patch applied added a couple of new strict_strtoul calls. Converted those to kstroul(). Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: do not set queue_mapping directlyHauke Mehrtens
It is preferred to use the setter that to set queue_mapping directly. This also helps backporting in compat-wireless. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: discard corrupted packets in RXArik Nemtsov
When packets arrive with a RX descriptor indicating corruption, discard them. In general white-list the RX descriptor status to prevent rouge data from being sent up. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: implement the tx_frames_pending mac80211 callbackArik Nemtsov
Frames are considered pending when they reside in the driver TX queue or already queued in the FW. This notion of "pending" is appropriate for power save considerations in STA mode, but not necessarily in other modes (for instance P2P-GO). [Fixed a sparse warning about missing "static" in a function declaration -- Luca] Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: Enable dynamic memory for 127xIdo Yariv
The FW can dynamically manage its internal TX & RX memory pools, moving blocks from one pool to another when necessary. This can significantly improve performance. Currently this feature is enabled only for 128x. Enable dynamic memory for 127x as well. Other parameters in the memory configuration structure may need to be fine tuned, as the optimal values for these may change once dynamic memory is enabled. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: Restart TX when TX descriptors are availableIdo Yariv
The driver stops sending TX packets when either there aren't enough memory blocks, or it runs out of TX descriptors. The driver continues to send packets to the FW only when more memory blocks are available. The FW might free TX descriptors without freeing the corresponding memory blocks, especially when dynamic memory is enabled. In cases where memory blocks are not freed at all, the driver will keep waiting for more memory blocks indefinitely. Fix this by clearing the WL1271_FLAG_FW_TX_BUSY flag when there are available TX descriptors. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: Modify memory configuration for 128x/APIdo Yariv
The 128x/AP firmware does not yet support dynamic memory. Temporarily, the memory configuration for the 127x was used both for 127x/AP as well as 128x/AP. Since the two chips don't have the same number of memory blocks, TP was significantly degraded. This hasn't been fine tuned yet, but using the base 128x numbers (without dynamic memory) seems to yield much better results (around 30% more). Additional fine tuning will be required in the future. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: add debugfs entries for dtim_interval and beacon_intervalEliad Peller
When configuring ACX_WAKE_UP_CONDITIONS (before entering psm), we tell the firmware to wake up once in N DTIMs/beacons. Allow control of this value via debugfs (for debugging purposes). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: Update Power Save Exit Retries PacketsShahar Levi
Reducing the retries of sending PS exit packets to the peer AP. That fix is to avoid sending unrealizable number of PS exit packets in case of ap lost. Signed-off-by: Shahar Levi <shahar_levi@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: FM WLAN coexistenceShahar Levi
Add support to FM WLAN coexistence (STA only). Some WiFi harmonics may interfere with FM operation, to avoid this problem special coexistence techniques are activated around some FM frequencies. Signed-off-by: Shahar Levi <shahar_levi@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: configure rates when working in ibss modeEliad Peller
When working in ibss mode, we don't configure rate policy per station (as we use the same link for multiple stations), so currently the 1mb/s rate is being used. Instead, configure the firmware to use the whole 11b rates by default. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-10-10 04:21:30 +0000