summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-11-02ASoC: Add support for the WM8727 DAC.Neil Jones
Add support for the Wolfson Microelectronics WM8727 DAC, this is a simple non-configurable DAC. Signed-off-by: Neil Jones <neil.jones@imgtec.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-02ASoC: au1x: convert to platform drivers.Manuel Lauss
Convert psc-ac97,i2s to platform drivers similar to the davinci ones. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-30ASoC: refactor snd_soc_update_bits()Eero Nurkkala
Introduce a wrapper call snd_soc_update_bits_locked() that will take the codec mutex. This call is used when the codec mutex is not already taken. Drivers calling snd_soc_update_bits() may wish to make sure the codec mutex is taken from the driver. Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-30ASoC: remove io_mutexEero Nurkkala
Remove the io_mutex. It has a drawback of serializing all accesses to snd_soc_update_bits() even when multiple codecs are in use. In addition, it fails to actually do its task - during snd_soc_update_bits(), dapm_update_bits() may also be accessing the same register which may result in an outdated register value. Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-30Merge branch 'for-2.6.32' into for-2.6.33Mark Brown
2009-10-30ASoC: sh: FSI: Add capture supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-30ASoC: sh: FSI: Remove DMA supportKuninori Morimoto
SuperH FSI device have the hardware limitation to use DMA. If DMA is used, LCD output will be broken. Maybe there are some solution. But I don't know how to do it now. This patch remove DMA support and use soft transfer. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-29ASoC: Modifying Kconfig/Makefile for AM3517 EVMAnuj Aggarwal
Modifying the Kconfig and Makefile in sound/soc/omap folder to add support for OMAP3517 / AM3517 EVM in Alsa SoC. Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-29ASoC: Adding OMAP3517 / AM3517 EVM support in ASOCAnuj Aggarwal
Adding support for OMAP3517 / AM3517 EVM in Alsa SoC. Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-29ASoC: OMAP3EVM: Use the twl4030_setup_data for headset pop-removalAnuj Aggarwal
The pop-removal specific values are configured for TWL4030 codec for OMAP3EVM through this patch. Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-29ASoC: TWL4030: Add APLL supply for the capture pathPeter Ujfalusi
Capture path also need the APLL enabled, adding DAPM_SUPPLY for the Virtual ADCs. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-29ASoC: TWL4030: Change APLL powering sequencePeter Ujfalusi
It seams that certain part of the twl4030 codec needs the APLL enabled before they are enabled. Paths which has any digital processing needs need the APLL enabled before they can function. For example the vibra output will have some random data after it is enabled and before the APLL also enabled. If only analog components are in use (analog bypass), than it seams, that the APLL does not need to be enabled. This lowers the power consumption with around ~0.005A. Adding DAPM_SUPPLY to the Digital playback route and also to the capture route to enable and disable the APLL. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-29ASoC: TWL4030: Vibra motor stop fix when it is driven with audioJari Vanhala
This patch fixes vibrator playing incoherently, when driven with audio. There is something wrong in switch 3 at H-bridge and VIBRA_SET still affects PWM generator. Slowest value fixes things. Signed-off-by: Jari Vanhala <ext-jari.vanhala@nokia.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-29ASoC: CS4270: export de-emphasis filter as ALSA controlDaniel Mack
The CS4270 codec features an de-emphasis filter for compensation of audio material filtered by an 50/15 uS algorithm. Not sure whether we should always enable it for 44100Hz sampling frequency, but it should at least be configurable by the user. Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-29ASoC: Minor SMDK64xx WM8580 cleanupsMark Brown
Fix up some comments, remove all enable_pin() calls (edge widgets are all enabled by default) and mark the microphone as disabled by default since it requires a resistor fit to connect it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-28ASoC: TWL4030: Change codec_muted to apll_enabledPeter Ujfalusi
codec_muted is missleading, change it to apll_enabled, which is what it is doing: enabing and disabling the APLL. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-28ASoC: TWL4030: Remove bypass trackingPeter Ujfalusi
Since ASoC core now handling the codec bias differently there is no need to do the tracking of bypass switch states anymore. Handling of the common bit for analog loopbacks is done with DAPM_SUPPLY for the bypass paths. Now this bit is only enabled when there is a complete analog bypass path, compared to the previous implementation, when the global switch was enabled if there were any of the analog bypass switch was on (regardless if there were complete path or not) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-26ASoC: Add regulator support for WM8731Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-25ASoC: TWL4030: Driver registration via twl4030_codec MFDPeter Ujfalusi
Change the way how the twl4030 soc codec driver is loaded/probed. Use the device probing via tlw4030_codec MFD device. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-25ASoC: TWL4030: use the twl4030-codec.h for register descriptionsPeter Ujfalusi
Remove the register descriptions from the twl4030.h file and use the linux/mfd/twl4030-codec.h instead, which has the codec related register descriptions also. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-25OMAP: Platform support for twl4030_codec MFDPeter Ujfalusi
Add needed platform data for the twl4030_codec MFD on boards, where the audio part of the twl4030 codec is used. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-25MFD: twl4030: add twl4030_codec MFD as a new child to the corePeter Ujfalusi
New MFD child to twl4030 MFD device. Reason for the twl4030_codec MFD: the vibra control is actually in the codec part of the twl4030. If both the vibra and the audio functionality is needed from the twl4030 at the same time, than they need to control the codec power and APLL at the same time without breaking the other driver. Also these two has to be able to work without the need for the other driver. This MFD device will be used by the drivers, which needs resources from the twl4030 codec like audio and vibra. The platform specific configuration data is passed along to the child drivers (audio, vibra). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-25ASoC: Amstrad Delta: add info about the line discipline requirement to ↵Janusz Krzysztofik
Kconfig help text I thought it could be usefull to add some information on how to get the device fully supported by loading a line discipline on the modem line. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-22ASoC: OMAP: Don't try to set unsupported OMAP_DMA_DATA_BURST_16 on OMAP1Janusz Krzysztofik
After DMA burst mode has been introduced in sound/soc/omap/omap-pcm.c, omap_pcm_prepare() unconditionally calls: omap_set_dma_src_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16); omap_set_dma_dest_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16); Current implementation of those two functions found in arch/arm/plat-ompa/dma.c doesn't support OMAP_DMA_DATA_BURST_16 on OMAP1 at all, so they both end with BUG() on that machine. That results in ASoC being completely unusable, at least on my OMAP5910 based Amstrad Delta. The patch corrects the problem by not calling those two functions when run on OMAP1 class based machines. Created against linux-2.6.32-rc5. Tested on Amstrad Delta. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-21ASoC: tlv320dac33: typo fix in the headerPeter Ujfalusi
Fix the definition of DAC33_LTM field, the LTM bits in FIFO_IRQ_MODE_B register are starting at bit 6. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-21ASoC: Amstrad Delta minor cleanupsJanusz Krzysztofik
Hi Mark, Here is a patch that corrects small omissions I have found in my code. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-19Merge branch 'for-2.6.32' into for-2.6.33Mark Brown
2009-10-19ASoC: Fix possible codec_dai->ops NULL pointer problemsBarry Song
Some codec DAIs like stac9766, wm9712, wm9713, ad1980 don't register themselves then it loses to the chance to be given a null_dai_ops in snd_soc_register_dai if they have no ops. When functions like soc_pcm_open, soc_pcm_hw_params etc. access the ops field in these DAIs, panic will happen. Signed-off-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-19ASoC: Move dereference after NULL testJulia Lawall
If the NULL test on jack is needed, then the derefernce should be after the NULL test. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // <smpl> @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-19ASoC: au1x: psc-ac97: reorganize timeoutsManuel Lauss
Codec read/write functions: wait 21us between the pokings of hardware. Add timeouts to unbounded loops waiting for bits to change. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-19ASoC: au1x: psc-ac97: verify correct codec register was readManuel Lauss
Verify that the correct register has been received from the codec. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-19ASoC: TWL4030: Only update the needed bits in *set_dai_sysclkPeter Ujfalusi
Do not rewrite the whole register, but only update the needed bits in set_dai_sysclk functions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15Merge branch 'for-2.6.32' into for-2.6.33Mark Brown
2009-10-15ASoC: Codec driver for Texas Instruments tlv320dac33 codecPeter Ujfalusi
Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15ASoC: finally enable support for eXeda and CM-X300Igor Grinberg
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> CC: Mark Brown <broonie@opensource.wolfsonmicro.com> CC: alsa-devel@alsa-project.org Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15ASoC: Remove snd_soc_suspend_device()Mark Brown
The PM core will grow pm_link infrastructure in 2.6.33 which can be used to implement the intended functionality of the ASoC-specific device suspend and resume callbacks so drop them. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-13ASoC: S3C: Remove <plat/audio.h>Ben Dooks
Remove the <plat/audio.h> include from arch/arm/plat-s3c/include/plat/audio.h as it provides nothing to the current kernel and is not in any future plans for the system. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-13ASoC: Serialize access to dapm_power_widgets()Eero Nurkkala
Access to damp_power_widgets() is assumed to be single-threaded. Concurrent accesses to dapm_power_widgets() may result in unpredictable behavior. Calls from: close_delayed_work() soc_codec_close() soc_pcm_prepare() soc_suspend() soc_resume_deferred() to snd_soc_dapm_stream_event() do not have the codec->mutex taken to cover the call to dapm_power_widgets(). Thus, take the mutex in these paths also to assure single-threaded use of dapm_power_widgets(). Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-12ASoC: TPA6130A2: Make tpa6130a2_power as staticPeter Ujfalusi
The power for the amplifier should be handled internally by the tpa6130a2 driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-09ASoC: Minor fixups to tpa6130a2 driverMark Brown
- Staticise ttpa6130a2_client. - Remove unneeded cast from void. - Use explict NULL rather than 0. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-09ASoC: TPA6130A2 amplifier driverPeter Ujfalusi
Driver for Texas Instruments TPA6130A2 stereo headphone amplifier. The driver provides playback gain control and also pre-defined DAPM_HP widgets and DAPM routings for power management. The DAPM_HP widget names are: "TPA6130A2 Headphone Left" "TPA6130A2 Headphone Right" From soc machine drivers to use with the tpa6130a2 amplifier, the tpa6130a2_add_controls has to be called, which adds the alsa controls and the DAPM routing needed for the tpa6130a2. After that the machine driver can connect the codec's output with 'TPA6130A2 Left' and 'TPA6130A2 Right': {"TPA6130A2 Left", NULL, "CODEC LEFT OUT"}, {"TPA6130A2 Right", NULL, "CODEC RIGHT OUT"}, Internally the left and right channels are powered separately. When none of the channels are needed the amplifier is powered down: hard power: valid GPIO number is passed within platform data soft power: Using the software shutdown of the amplifier Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-09ASoC: at91sam9g20ek_2mmc board uses same audio connexion as at91sam9g20ekNicolas Ferre
The modified revision of at91sam9g20 Evaluation Kit rev. C and onwards share with previous ones its audio connexion to Wolfson wm8731. Modify the SoC file to extend the machine ID checking. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-08Merge branch 'for-2.6.32' into for-2.6.33Mark Brown
2009-10-06Merge branch 'upstream/wm8350' into for-2.6.32Mark Brown
2009-10-06ASoC: WM8350 capture PGA mutes are invertedMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2009-10-06ASoC: Remove absent SYNC and TDM DAI format options from i.MX SSIMark Brown
These should be handled via set_tdm_slot() now and cause build failures as-is. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-06Merge branch 'for-2.6.32' into for-2.6.33Mark Brown
2009-10-06ASoC: Add virtual enumeration support for DAPM muxesMark Brown
Sometimes it is desirable to have a mux which does not reflect any direct register configuration but which will instead only have an effect implicitly (for example, as a result of changing which parts of the device are powered up). Provide a virtual mux for this purpose. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-06ASoC: Push DAPM enumeration register change test outMark Brown
Don't assume that enumerations are backed by registers when updating mux power. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-06ASoC: Simplify code for DAPM widget updatesMark Brown
We don't need to check for an event callback since we also check for an appropriate event flag when applying mux status changes. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-14 11:03:13 +0000