| Age | Commit message (Collapse) | Author |
|---|
|
regulator_supply_alias_list was accessed without any locking in
regulator_supply_alias(), regulator_register_supply_alias(), and
regulator_unregister_supply_alias(). Concurrent registration,
unregistration and lookups can race, leading to:
1 use-after-free if an alias entry is removed while being read,
2 duplicate entries when two threads register the same alias,
3 inconsistent alias mappings observed by consumers.
Protect all traversals, insertions and deletions on
regulator_supply_alias_list with the existing regulator_list_mutex.
Fixes: a06ccd9c3785f ("regulator: core: Add ability to create a lookup alias for supply")
Signed-off-by: sparkhuang <huangshaobo3@xiaomi.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127025716.5440-1-huangshaobo3@xiaomi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>:
Use container_of_const(), which is preferred over container_of(), when
the argument 'ptr' and returned pointer are already const, for better
code safety and readability.
Some drivers already have const everywhere, so container_of_const can be
directly used. In few other drivers, the final pointer can be constified
that way.
|
|
Pointer to 'struct regulator_desc' is a pointer to const and the
wrapping structure (container) is not being modified, thus entire syntax
can be replaced to preferred and safer container_of_const().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251126-container-of-const-regulator-v1-8-eeec378144d4@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pointer to 'struct regulator_desc' is a pointer to const and the
wrapping structure (container) is not being modified, thus entire syntax
can be replaced to preferred and safer container_of_const().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251126-container-of-const-regulator-v1-7-eeec378144d4@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pointer to 'struct regulator_desc' is a pointer to const and the
wrapping structure (container) is not being modified, thus entire syntax
can be replaced to preferred and safer container_of_const().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251126-container-of-const-regulator-v1-6-eeec378144d4@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pointer to 'struct regulator_desc' is a pointer to const and the
wrapping structure (container) is not being modified, thus entire syntax
can be replaced to preferred and safer container_of_const().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251126-container-of-const-regulator-v1-5-eeec378144d4@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pointer to 'struct regulator_desc' is a pointer to const and the
wrapping structure (container) is not being modified, thus entire syntax
can be replaced to preferred and safer container_of_const().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251126-container-of-const-regulator-v1-4-eeec378144d4@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pointer to 'struct regulator_desc' is a pointer to const and the
wrapping structure (container) is not being modified, thus entire syntax
can be replaced to preferred and safer container_of_const().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251126-container-of-const-regulator-v1-3-eeec378144d4@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pointer to 'struct regulator_desc' is a pointer to const and the
wrapping structure (container) is not being modified, thus entire syntax
can be replaced to preferred and safer container_of_const().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251126-container-of-const-regulator-v1-2-eeec378144d4@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use container_of_const(), which is preferred over container_of(), when
the argument 'ptr' and returned pointer are already const, for better
code safety and readability.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251126-container-of-const-regulator-v1-1-eeec378144d4@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Andreas Kemnade <andreas@kemnade.info>:
Add a driver for the FP9931/JD9930 regulator which provides the
comparatively high voltages needed for electronic paper displays.
Datasheet for the FP9931 is at
https://www.fitipower.com/dl/file/flXa6hIchVeu0W3K
Although it is in English, it seems to be only downloadable
from the Chinese part of that website.
For the JD9930 there can be a datasheet found at
https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/196/JD9930_2D00_0.7_2D00_JUN_2D00_2019.pdf
To simplify things, include the hwmon part directly which is only
one register read and there are not other functions besides
regulators in this chip.
|
|
Return "PTR_ERR(pca9450->sd_vsel_gpio)" instead of "ret". The "ret"
variable is success at this point.
Fixes: 3ce6f4f943dd ("regulator: pca9450: Fix control register for LDO5")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aSBqnPoBrsNB1Ale@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
This specific workload do not benefit from a per-cpu workqueue, so use
the default unbound workqueue (system_dfl_wq) instead.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251106145003.245866-1-marco.crivellari@suse.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a driver for the FP9931/JD9930 regulator. Implement handling of the PG
(power good), TS_EN (temperature sensor enable), and EN (enable regulators)
pins. Implement the pair of symmetric LDOs as a single regulator because
they share a single voltage set register. For simplicity, just add the
temperature sensor (depending on external NTC) directly.
Limitations:
- As these regulators are controlled together with the VCOM regulator via
the EN pin, some kind of management must be in place. As the enable op
is not called when the regulator is already enabled, simple refcounting
seems not to work to avoid clearing EN when one regulator is still
enabled. As these regulators are typically used together, this
limitation should not hurt hard, just provide the is_enabled op.
- As the VCOM step is quite odd (5V/255 steps), rounding is needed.
Due to some limitations in the regulator core, the max/min voltages in
the devicetree must match the idea of the driver how to round things
exactly.
- Night mode is not implemented, so only the FP9931 compatible is needed in
the driver, there is no REGULATOR_MODE_NIGHT and no clear definition in
the datasheet what it does, also the XON pin which seems to be an input
related to that night mode is not used.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20251115-fp9931-submit-v3-3-92f5d0772b68@kemnade.info
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document the FP9931/JD9930. As the FP9931 is a clear subset of the JD9930,
define it as a fallback compatible. GPIO names are same as in the datasheet
except for the EN pad which is described as "enable".
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20251115-fp9931-submit-v3-2-92f5d0772b68@kemnade.info
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add Fitipower Integrated Technology Inc. to the vendor prefixes.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20251115-fp9931-submit-v3-1-92f5d0772b68@kemnade.info
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Bartosz Golaszewski <brgl@bgdev.pl>:
Problem statement: GPIOs are implemented as a strictly exclusive
resource in the kernel but there are lots of platforms on which single
pin is shared by multiple devices which don't communicate so need some
way of properly sharing access to a GPIO. What we have now is the
GPIOD_FLAGS_BIT_NONEXCLUSIVE flag which was introduced as a hack and
doesn't do any locking or arbitration of access - it literally just hand
the same GPIO descriptor to all interested users.
The proposed solution is composed of three major parts: the high-level,
shared GPIO proxy driver that arbitrates access to the shared pin and
exposes a regular GPIO chip interface to consumers, a low-level shared
GPIOLIB module that scans firmware nodes and creates auxiliary devices
that attach to the proxy driver and finally a set of core GPIOLIB
changes that plug the former into the GPIO lookup path.
The changes are implemented in a way that allows to seamlessly compile
out any code related to sharing GPIOs for systems that don't need it.
The practical use-case for this are the powerdown GPIOs shared by
speakers on Qualcomm db845c platform, however I have also extensively
tested it using gpio-virtuser on arm64 qemu with various DT
configurations.
|
|
GPIOLIB is now aware of shared GPIOs and - for platforms where access to
such pins is managed internally - we don't need to keep track of the
enable count.
Once all users in the kernel switch to using the new mechanism, we'll be
able to drop the internal counting of users from the regulator code.
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20251112-gpio-shared-v4-10-b51f97b1abd8@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove unused included headers. This makes the code simpler.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20251117103205.4038600-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make the different debounce timers configurable from the devicetree.
Depending on the board design, these have to be set different than the
default register values.
Signed-off-by: Martijn de Gouw <martijn.de.gouw@prodrive-technologies.com>
Link: https://patch.msgid.link/20251117202215.1936139-2-martijn.de.gouw@prodrive-technologies.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make the different debounce timers configurable from the devicetree.
Depending on the board design, these have to be set different than the
default register values.
Signed-off-by: Martijn de Gouw <martijn.de.gouw@prodrive-technologies.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251117202215.1936139-1-martijn.de.gouw@prodrive-technologies.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Provide an interface allowing consumers to check if a GPIO descriptor
represents a GPIO that can potentially be shared by multiple consumers
at the same time. This is exposed to allow subsystems that already
work around the limitations of the current non-exclusive GPIO handling
in some ways, to gradually convert to relying on the new shared GPIO
feature of GPIOLIB.
Extend the gpiolib-shared module to mark the GPIO shared proxy
descriptors with a flag checked by the new interface.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-6-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
As the final step in adding official support for shared GPIOs, enable
the previously added elements in core GPIO subsystem code. Set-up shared
GPIOs when adding a GPIO chip, tear it down on removal and check if a
GPIO descriptor looked up during the firmware-node stage is shared and
fall-back to machine lookup in this case.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-5-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add a virtual GPIO proxy driver which arbitrates access to a single
shared GPIO by multiple users. It works together with the core shared
GPIO support from GPIOLIB and functions by acquiring a reference to a
shared GPIO descriptor exposed by gpiolib-shared and making sure that
the state of the GPIO stays consistent.
In general: if there's only one user at the moment: allow it to do
anything as if this was a normal GPIO (in essence: just propagate calls
to the underlying real hardware driver). If there are more users: don't
allow to change the direction set by the initial user, allow to change
configuration options but warn about possible conflicts and finally:
treat the output-high value as a reference counted, logical "GPIO
enabled" setting, meaning: the GPIO value is set to high when the first
user requests it to be high and back to low once the last user stops
"voting" for high.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-4-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
This module scans the device tree (for now only OF nodes are supported
but care is taken to make other fwnode implementations easy to
integrate) and determines which GPIO lines are shared by multiple users.
It stores that information in memory. When the GPIO chip exposing shared
lines is registered, the shared GPIO descriptors it exposes are marked
as shared and virtual "proxy" devices that mediate access to the shared
lines are created. When a consumer of a shared GPIO looks it up, its
fwnode lookup is redirected to a just-in-time machine lookup that points
to this proxy device.
This code can be compiled out on platforms which don't use shared GPIOs.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-3-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Define a new GPIO descriptor flag for marking pins that are shared by
multiple consumer. This flag will be used in several places so we need
to do it in advance and separately from other changes.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-2-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Implement a function for checking if a string ends with a different
string and add its kunit test cases.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-1-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix writing bpf_prog (infos|btfs)_cnt to data file, to not generate
invalid perf.data files in some corner cases.
- Fix 'perf top' segfault by ensuring libbfd is initialized. This is an
opt-in feature due to license incompatibilities.
- Fix segfault in 'perf lock' due to missing kernel map.
- Fix 'perf lock contention' test.
- Don't fail fast path detection if binutils-devel isn't available.
- Sync KVM's vmx.h with the kernel to pick SEAMCALL exit reason.
* tag 'perf-tools-fixes-for-v6.18-2-2025-11-16' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf libbfd: Ensure libbfd is initialized prior to use
perf test: Fix lock contention test
perf lock: Fix segfault due to missing kernel map
tools headers UAPI: Sync KVM's vmx.h with the kernel to pick SEAMCALL exit reason
perf build: Don't fail fast path feature detection when binutils-devel is not available
perf header: Write bpf_prog (infos|btfs)_cnt to data file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"7 hotfixes. 5 are cc:stable, 4 are against mm/
All are singletons - please see the respective changelogs for details"
* tag 'mm-hotfixes-stable-2025-11-16-10-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm, swap: fix potential UAF issue for VMA readahead
selftests/user_events: fix type cast for write_index packed member in perf_test
lib/test_kho: check if KHO is enabled
mm/huge_memory: fix folio split check for anon folios in swapcache
MAINTAINERS: update David Hildenbrand's email address
crash: fix crashkernel resource shrink
mm: fix MAX_FOLIO_ORDER on powerpc configs with hugetlb
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
"This includes some fixes for the topology map, newly introduced in
v6.18 kernel"
* tag 'firewire-fixes-6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: fix to update generation field in topology map
firewire: core: Initialize topology_map.lock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- In Versalnet, handle the reporting of non-standard hw errors whose
information can come in more than one remote processor message.
- Explicitly reenable ECC checking after a warm reset in Altera OCRAM
as those registers are reset to default otherwise
- Fix single-bit error injection in Altera EDAC to not inject errors
directly in ECC RAM and thus lead to false double-bit errors due to
same ECC RAM being in concurrent use
* tag 'edac_urgent_for_v6.18_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/altera: Use INTTEST register for Ethernet and USB SBE injection
EDAC/altera: Handle OCRAM ECC enable after warm reset
EDAC/versalnet: Handle split messages for non-standard errors
|
|
The generation field of topology map is updated after initialized by zero.
The updated value of generation field is always zero, and is against
specification.
This commit fixes the bug.
Fixes: 7d138cb269db ("firewire: core: use spin lock specific to topology map")
Link: https://lore.kernel.org/r/20251114144421.415278-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
Since commit 78524b05f1a3 ("mm, swap: avoid redundant swap device
pinning"), the common helper for allocating and preparing a folio in the
swap cache layer no longer tries to get a swap device reference
internally, because all callers of __read_swap_cache_async are already
holding a swap entry reference. The repeated swap device pinning isn't
needed on the same swap device.
Caller of VMA readahead is also holding a reference to the target entry's
swap device, but VMA readahead walks the page table, so it might encounter
swap entries from other devices, and call __read_swap_cache_async on
another device without holding a reference to it.
So it is possible to cause a UAF when swapoff of device A raced with
swapin on device B, and VMA readahead tries to read swap entries from
device A. It's not easy to trigger, but in theory, it could cause real
issues.
Make VMA readahead try to get the device reference first if the swap
device is a different one from the target entry.
Link: https://lkml.kernel.org/r/20251111-swap-fix-vma-uaf-v1-1-41c660e58562@tencent.com
Fixes: 78524b05f1a3 ("mm, swap: avoid redundant swap device pinning")
Suggested-by: Huang Ying <ying.huang@linux.alibaba.com>
Signed-off-by: Kairui Song <kasong@tencent.com>
Acked-by: Chris Li <chrisl@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Accessing 'reg.write_index' directly triggers a -Waddress-of-packed-member
warning due to potential unaligned pointer access:
perf_test.c:239:38: warning: taking address of packed member 'write_index'
of class or structure 'user_reg' may result in an unaligned pointer value
[-Waddress-of-packed-member]
239 | ASSERT_NE(-1, write(self->data_fd, ®.write_index,
| ^~~~~~~~~~~~~~~
Since write(2) works with any alignment. Casting '®.write_index'
explicitly to 'void *' to suppress this warning.
Link: https://lkml.kernel.org/r/20251106095532.15185-1-ankitkhushwaha.linux@gmail.com
Fixes: 42187bdc3ca4 ("selftests/user_events: Add perf self-test for empty arguments events")
Signed-off-by: Ankit Khushwaha <ankitkhushwaha.linux@gmail.com>
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: sunliming <sunliming@kylinos.cn>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We must check whether KHO is enabled prior to issuing KHO commands,
otherwise KHO internal data structures are not initialized.
Link: https://lkml.kernel.org/r/20251106220635.2608494-1-pasha.tatashin@soleen.com
Fixes: b753522bed0b ("kho: add test for kexec handover")
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202511061629.e242724-lkp@intel.com
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Both uniform and non uniform split check missed the check to prevent
splitting anon folios in swapcache to non-zero order.
Splitting anon folios in swapcache to non-zero order can cause data
corruption since swapcache only support PMD order and order-0 entries.
This can happen when one use split_huge_pages under debugfs to split
anon folios in swapcache.
In-tree callers do not perform such an illegal operation. Only debugfs
interface could trigger it. I will put adding a test case on my TODO
list.
Fix the check.
Link: https://lkml.kernel.org/r/20251105162910.752266-1-ziy@nvidia.com
Fixes: 58729c04cf10 ("mm/huge_memory: add buddy allocator like (non-uniform) folio_split()")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reported-by: "David Hildenbrand (Red Hat)" <david@kernel.org>
Closes: https://lore.kernel.org/all/dc0ecc2c-4089-484f-917f-920fdca4c898@kernel.org/
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Switch to kernel.org email address as I will be leaving Red Hat. The old
address will remain active until end of January 2026, so performing the
change now should make sure that most mails will reach me.
Link: https://lkml.kernel.org/r/20251103103659.379335-1-david@kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When crashkernel is configured with a high reservation, shrinking its
value below the low crashkernel reservation causes two issues:
1. Invalid crashkernel resource objects
2. Kernel crash if crashkernel shrinking is done twice
For example, with crashkernel=200M,high, the kernel reserves 200MB of high
memory and some default low memory (say 256MB). The reservation appears
as:
cat /proc/iomem | grep -i crash
af000000-beffffff : Crash kernel
433000000-43f7fffff : Crash kernel
If crashkernel is then shrunk to 50MB (echo 52428800 >
/sys/kernel/kexec_crash_size), /proc/iomem still shows 256MB reserved:
af000000-beffffff : Crash kernel
Instead, it should show 50MB:
af000000-b21fffff : Crash kernel
Further shrinking crashkernel to 40MB causes a kernel crash with the
following trace (x86):
BUG: kernel NULL pointer dereference, address: 0000000000000038
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
<snip...>
Call Trace: <TASK>
? __die_body.cold+0x19/0x27
? page_fault_oops+0x15a/0x2f0
? search_module_extables+0x19/0x60
? search_bpf_extables+0x5f/0x80
? exc_page_fault+0x7e/0x180
? asm_exc_page_fault+0x26/0x30
? __release_resource+0xd/0xb0
release_resource+0x26/0x40
__crash_shrink_memory+0xe5/0x110
crash_shrink_memory+0x12a/0x190
kexec_crash_size_store+0x41/0x80
kernfs_fop_write_iter+0x141/0x1f0
vfs_write+0x294/0x460
ksys_write+0x6d/0xf0
<snip...>
This happens because __crash_shrink_memory()/kernel/crash_core.c
incorrectly updates the crashk_res resource object even when
crashk_low_res should be updated.
Fix this by ensuring the correct crashkernel resource object is updated
when shrinking crashkernel memory.
Link: https://lkml.kernel.org/r/20251101193741.289252-1-sourabhjain@linux.ibm.com
Fixes: 16c6006af4d4 ("kexec: enable kexec_crash_size to support two crash kernel regions")
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In the past, CONFIG_ARCH_HAS_GIGANTIC_PAGE indicated that we support
runtime allocation of gigantic hugetlb folios. In the meantime it evolved
into a generic way for the architecture to state that it supports gigantic
hugetlb folios.
In commit fae7d834c43c ("mm: add __dump_folio()") we started using
CONFIG_ARCH_HAS_GIGANTIC_PAGE to decide MAX_FOLIO_ORDER: whether we could
have folios larger than what the buddy can handle. In the context of that
commit, we started using MAX_FOLIO_ORDER to detect page corruptions when
dumping tail pages of folios. Before that commit, we assumed that we
cannot have folios larger than the highest buddy order, which was
obviously wrong.
In commit 7b4f21f5e038 ("mm/hugetlb: check for unreasonable folio sizes
when registering hstate"), we used MAX_FOLIO_ORDER to detect
inconsistencies, and in fact, we found some now.
Powerpc allows for configs that can allocate gigantic folio during boot
(not at runtime), that do not set CONFIG_ARCH_HAS_GIGANTIC_PAGE and can
exceed PUD_ORDER.
To fix it, let's make powerpc select CONFIG_ARCH_HAS_GIGANTIC_PAGE with
hugetlb on powerpc, and increase the maximum folio size with hugetlb to 16
GiB on 64bit (possible on arm64 and powerpc) and 1 GiB on 32 bit
(powerpc). Note that on some powerpc configurations, whether we actually
have gigantic pages depends on the setting of CONFIG_ARCH_FORCE_MAX_ORDER,
but there is nothing really problematic about setting it unconditionally:
we just try to keep the value small so we can better detect problems in
__dump_folio() and inconsistencies around the expected largest folio in
the system.
Ideally, we'd have a better way to obtain the maximum hugetlb folio size
and detect ourselves whether we really end up with gigantic folios. Let's
defer bigger changes and fix the warnings first.
While at it, handle gigantic DAX folios more clearly: DAX can only end up
creating gigantic folios with HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD.
Add a new Kconfig option HAVE_GIGANTIC_FOLIOS to make both cases clearer.
In particular, worry about ARCH_HAS_GIGANTIC_PAGE only with HUGETLB_PAGE.
Note: with enabling CONFIG_ARCH_HAS_GIGANTIC_PAGE on powerpc, we will now
also allow for runtime allocations of folios in some more powerpc configs.
I don't think this is a problem, but if it is we could handle it through
__HAVE_ARCH_GIGANTIC_PAGE_RUNTIME_SUPPORTED.
While __dump_page()/__dump_folio was also problematic (not handling
dumping of tail pages of such gigantic folios correctly), it doesn't seem
critical enough to mark it as a fix.
Link: https://lkml.kernel.org/r/20251114214920.2550676-1-david@kernel.org
Fixes: 7b4f21f5e038 ("mm/hugetlb: check for unreasonable folio sizes when registering hstate")
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Closes: https://lore.kernel.org/r/3e043453-3f27-48ad-b987-cc39f523060a@csgroup.eu/
Reported-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Closes: https://lore.kernel.org/r/94377f5c-d4f0-4c0f-b0f6-5bf1cd7305b1@linux.ibm.com/
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fix from Heiko Carstens:
- Fix a bug in the __ptep_rdp() inline assembly which may lead to
missing TLB flushes
* tag 's390-6.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: Fix __ptep_rdp() inline assembly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Update the list of AMD microcode minimum Entrysign revisions
- Add additional fixed AMD RDSEED microcode revisions
- Update the language transliteration for Kiryl Shutsemau's name
in the MAINTAINERS entry
* tag 'x86-urgent-2025-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Add Zen5 model 0x44, stepping 0x1 minrev
x86/CPU/AMD: Add additional fixed RDSEED microcode revisions
MAINTAINERS: Update name spelling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"Fix a memory leak in the posix timer creation logic"
* tag 'timers-urgent-2025-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-timers: Plug potential memory leak in do_timer_create()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"Fix an irqchip driver release bug in the riscv-intc irqchip driver"
* tag 'irq-urgent-2025-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/riscv-intc: Add missing free() callback in riscv_intc_domain_ops
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core fix from Ingo Molnar:
"Fix a broken #ifndef in the <linux/entry-virt.h> header.
It hasn't caused problems upstream yet because no arch overrides
arch_xfer_to_guest_mode_handle_work() at this moment"
* tag 'core-urgent-2025-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Fix ifndef around arch_xfer_to_guest_mode_handle_work() stub
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Cache the ASPM L0s/L1 Supported bits early so quirks can override
them if necessary (Bjorn Helgaas)
- Add quirks for PA Semi and Freescale Root Ports and a HiSilicon Wi-Fi
device that are reported to have broken L0s and L1 (Shawn Lin, Bjorn
Helgaas)
* tag 'pci-v6.18-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/ASPM: Avoid L0s and L1 on Hi1105 [19e5:1105] Wi-Fi
PCI/ASPM: Avoid L0s and L1 on PA Semi [1959:a002] Root Ports
PCI/ASPM: Avoid L0s and L1 on Freescale [1957:0451] Root Ports
PCI/ASPM: Convert quirks to override advertised link states
PCI/ASPM: Add pcie_aspm_remove_cap() to override advertised link states
PCI/ASPM: Cache L0s/L1 Supported so advertised link states can be overridden
|
|
Pull bpf fixes from Alexei Starovoitov:
- Fix interaction between livepatch and BPF fexit programs (Song Liu)
With Steven and Masami acks.
- Fix stack ORC unwind from BPF kprobe_multi (Jiri Olsa)
With Steven and Masami acks.
- Fix out of bounds access in widen_imprecise_scalars() in the verifier
(Eduard Zingerman)
- Fix conflicts between MPTCP and BPF sockmap (Jiayuan Chen)
- Fix net_sched storage collision with BPF data_meta/data_end (Eric
Dumazet)
- Add _impl suffix to BPF kfuncs with implicit args to avoid breaking
them in bpf-next when KF_IMPLICIT_ARGS is added (Mykyta Yatsenko)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Test widen_imprecise_scalars() with different stack depth
bpf: account for current allocated stack depth in widen_imprecise_scalars()
bpf: Add bpf_prog_run_data_pointers()
selftests/bpf: Add mptcp test with sockmap
mptcp: Fix proto fallback detection with BPF
mptcp: Disallow MPTCP subflows from sockmap
selftests/bpf: Add stacktrace ips test for raw_tp
selftests/bpf: Add stacktrace ips test for kprobe_multi/kretprobe_multi
x86/fgraph,bpf: Fix stack ORC unwind from kprobe_multi return probe
Revert "perf/x86: Always store regs->ip in perf_callchain_kernel()"
bpf: add _impl suffix for bpf_stream_vprintk() kfunc
bpf:add _impl suffix for bpf_task_work_schedule* kfuncs
selftests/bpf: Add tests for livepatch + bpf trampoline
ftrace: bpf: Fix IPMODIFY + DIRECT in modify_ftrace_direct()
ftrace: Fix BPF fexit with livepatch
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust fix from Miguel Ojeda:
- Fix a Rust 1.91.0 build issue due to 'bindings.o' not containing
DWARF debug information anymore by teaching gendwarfksyms to skip
object files without exports
* tag 'rust-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
gendwarfksyms: Skip files with no exports
|
|
Pull NFS client fixes from Anna Schumaker:
- Various fixes when using NFS with TLS
- Localio direct-IO fixes
- Fix error handling in nfs_atomic_open_v23()
- Fix sysfs memory leak when nfs_client kobject add fails
- Fix an incorrect parameter when calling nfs4_call_sync()
- Fix a failing LTP test when using delegated timestamps
* tag 'nfs-for-6.18-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: Fix LTP test failures when timestamps are delegated
NFSv4: Fix an incorrect parameter when calling nfs4_call_sync()
NFS: sysfs: fix leak when nfs_client kobject add fails
NFSv2/v3: Fix error handling in nfs_atomic_open_v23()
nfs/localio: do not issue misaligned DIO out-of-order
nfs/localio: Ensure DIO WRITE's IO on stable storage upon completion
nfs/localio: backfill missing partial read support for misaligned DIO
nfs/localio: add refcounting for each iocb IO associated with NFS pgio header
nfs/localio: remove unecessary ENOTBLK handling in DIO WRITE support
NFS: Check the TLS certificate fields in nfs_match_client()
pnfs: Set transport security policy to RPC_XPRTSEC_NONE unless using TLS
pnfs: Fix TLS logic in _nfs4_pnfs_v4_ds_connect()
pnfs: Fix TLS logic in _nfs4_pnfs_v3_ds_connect()
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes, amdgpu and vmwgfx making up the most of it, along with
panthor and i915/xe.
Seems about right for this time of development, nothing major
outstanding.
client:
- Fix description of module parameter
panthor:
- Flush writes before mapping buffers
vmwgfx:
- Improve command validation
- Improve ref counting
- Fix cursor-plane support
amdgpu:
- Disallow P2P DMA for GC 12 DCC surfaces
- ctx error handling fix
- UserQ fixes
- VRR fix
- ISP fix
- JPEG 5.0.1 fix
amdkfd:
- Save area check fix
- Fix GPU mappings for APU after prefetch
i915:
- Fix PSR's pipe to vblank conversion
- Disable Panel Replay on MST links
xe:
- New HW workarounds affecting PTL and WCL platforms
* tag 'drm-fixes-2025-11-15' of https://gitlab.freedesktop.org/drm/kernel:
drm/client: fix MODULE_PARM_DESC string for "active"
drm/i915/dp_mst: Disable Panel Replay
drm/amdkfd: Fix GPU mappings for APU after prefetch
drm/amdkfd: relax checks for over allocation of save area
drm/amdgpu/jpeg: Add parse_cs for JPEG5_0_1
drm/amd/amdgpu: Ensure isp_kernel_buffer_alloc() creates a new BO
drm/amd/display: Allow VRR params change if unsynced with the stream
drm/amdgpu: fix lock warning in amdgpu_userq_fence_driver_process
drm/amdgpu: jump to the correct label on failure
drm/amdgpu: disable peer-to-peer access for DCC-enabled GC12 VRAM surfaces
drm/xe/xe3lpg: Extend Wa_15016589081 for xe3lpg
drm/xe/xe3: Extend wa_14023061436
drm/xe/xe3: Add WA_14024681466 for Xe3_LPG
drm/i915/psr: fix pipe to vblank conversion
drm/panthor: Flush shmem writes before mapping buffers CPU-uncached
drm/vmwgfx: Restore Guest-Backed only cursor plane support
drm/vmwgfx: Use kref in vmw_bo_dirty
drm/vmwgfx: Validate command header size against SVGA_CMD_MAX_DATASIZE
|
