summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-06-30Merge branch '10GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2019-06-28 This series contains a smorgasbord of updates to many of the Intel drivers. Gustavo A. R. Silva updates the ice and iavf drivers to use the strcut_size() helper where possible. Miguel increases the pause and refresh time for flow control in the e1000e driver during reset for certain devices. Dann Frazier fixes a potential NULL pointer dereference in ixgbe driver when using non-IPSec enabled devices. Colin Ian King fixes a potential overflow during a shift in the ixgbe driver. Also fixes a potential NULL pointer dereference in the iavf driver by adding a check. Venkatesh Srinivas converts the e1000 driver to use dma_wmb() instead of wmb() for doorbell writes to avoid SFENCEs in the transmit and receive paths. Arjan updates the e1000e driver to improve boot time by over 100 msec by reducing the usleep ranges suring system startup. Artem updates the igb driver register dump in ethtool, first prepares the register dump for future additions of registers in the dump, then secondly, adds the RR2DCDELAY register to the dump. When dealing with time-sensitive networks, this register is helpful in determining your latency from the device to the ring. Alex fixes the ixgbevf driver to use the current cached link state, rather than trying to re-check the value from the PF. Harshitha adds support for MACVLAN offloads in i40e by using channels as MACVLAN interfaces. Detlev Casanova updates the e1000e driver to use delayed work instead of timers to run the watchdog. Vitaly fixes an issue in e1000e, where when disconnecting and reconnecting the physical cable connection, the NIC enters a DMoff state. This state causes a mismatch in link and duplexing, so check the PCIm function state and perform a PHY reset when in this state to resolve the issue. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-29r8169: remove not needed call to dma_sync_single_for_deviceHeiner Kallweit
DMA_API_HOWTO.txt includes an example explaining when dma_sync_single_for_device() is not needed, and that example matches our use case. The buffer isn't changed by the CPU and direction is DMA_FROM_DEVICE, so we can remove the call to dma_sync_single_for_device(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-29r8169: consider that 32 Bit DMA is the defaultHeiner Kallweit
Documentation/DMA-API-HOWTO.txt states: By default, the kernel assumes that your device can address 32-bits of DMA addressing. For a 64-bit capable device, this needs to be increased, and for a device with limitations, it needs to be decreased. Therefore we don't need the 32 Bit DMA fallback configuration and can remove it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-29r8169: improve handling VLAN tagHeiner Kallweit
The VLAN tag is stored in the descriptor in network byte order. Using swab16 works on little endian host systems only. Better play safe and use ntohs or htons respectively. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-29selftests: rtnetlink: skip ipsec offload tests if netdevsim isn't presentFlorian Westphal
running the script on systems without netdevsim now prints: SKIP: ipsec_offload can't load netdevsim instead of error message & failed status. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-29Merge branch 'em_ipt-add-support-for-addrtype'David S. Miller
Nikolay Aleksandrov says: ==================== em_ipt: add support for addrtype We would like to be able to use the addrtype from tc for ACL rules and em_ipt seems the best place to add support for the already existing xt match. The biggest issue is that addrtype revision 1 (with ipv6 support) is NFPROTO_UNSPEC and currently em_ipt can't differentiate between v4/v6 if such xt match is used because it passes the match's family instead of the packet one. The first 3 patches make em_ipt match only on IP traffic (currently both policy and addrtype recognize such traffic only) and make it pass the actual packet's protocol instead of the xt match family when it's unspecified. They also add support for NFPROTO_UNSPEC xt matches. The last patch allows to add addrtype rules via em_ipt. We need to keep the user-specified nfproto for dumping in order to be compatible with libxtables, we cannot dump NFPROTO_UNSPEC as the nfproto or we'll get an error from libxtables, thus the nfproto is limited to ipv4/ipv6 in patch 03 and is recorded. v3: don't use the user nfproto for matching, only for dumping, more information is available in the commit message in patch 03 v2: change patch 02 to set the nfproto only when unspecified and drop patch 04 from v1 (Eyal Birger) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-29net: sched: em_ipt: add support for addrtype matchingNikolay Aleksandrov
Allow em_ipt to use addrtype for matching. Restrict the use only to revision 1 which has IPv6 support. Since it's a NFPROTO_UNSPEC xt match we use the user-specified nfproto for matching, in case it's unspecified both v4/v6 will be matched by the rule. v2: no changes, was patch 5 in v1 Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-29net: sched: em_ipt: keep the user-specified nfproto and dump itNikolay Aleksandrov
If we dump NFPROTO_UNSPEC as nfproto user-space libxtables can't handle it and would exit with an error like: "libxtables: unhandled NFPROTO in xtables_set_nfproto" In order to avoid the error return the user-specified nfproto. If we don't record it then the match family is used which can be NFPROTO_UNSPEC. Even if we add support to mask NFPROTO_UNSPEC in iproute2 we have to be compatible with older versions which would be also be allowed to add NFPROTO_UNSPEC matches (e.g. addrtype after the last patch). v3: don't use the user nfproto for matching, only for dumping the rule, also don't allow the nfproto to be unspecified (explained above) v2: adjust changes to missing patch, was patch 04 in v1 Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-29net: sched: em_ipt: set the family based on the packet if it's unspecifiedNikolay Aleksandrov
Set the family based on the packet if it's unspecified otherwise protocol-neutral matches will have wrong information (e.g. NFPROTO_UNSPEC). In preparation for using NFPROTO_UNSPEC xt matches. v2: set the nfproto only when unspecified Suggested-by: Eyal Birger <eyal.birger@gmail.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-29net: sched: em_ipt: match only on ip/ipv6 trafficNikolay Aleksandrov
Restrict matching only to ip/ipv6 traffic and make sure we can use the headers, otherwise matches will be attempted on any protocol which can be unexpected by the xt matches. Currently policy supports only ipv4/6. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-29hinic: add vlan offload supportXue Chaojing
This patch adds vlan offload support for the HINIC driver. Signed-off-by: Xue Chaojing <xuechaojing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28e1000e: PCIm function state supportVitaly Lifshits
Due to commit: 5d8682588605 ("[misc] mei: me: allow runtime pm for platform with D0i3") When disconnecting the cable and reconnecting it the NIC enters DMoff state. This caused wrong link indication and duplex mismatch. This bug is described in: https://bugzilla.redhat.com/show_bug.cgi?id=1689436 Checking PCIm function state and performing PHY reset after a timeout in watchdog task solves this issue. Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-06-28e1000e: Make watchdog use delayed workDetlev Casanova
Use delayed work instead of timers to run the watchdog of the e1000e driver. Simplify the code with one less middle function. Signed-off-by: Detlev Casanova <detlev.casanova@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-06-28i40e: Add macvlan support on i40eHarshitha Ramamurthy
This patch enables macvlan offloads for i40e. The idea is to use channels as macvlan interfaces. The channels are VSIs of type VMDQ. When the first macvlan is created, the maximum number of channels possible are created. From then on, as a macvlan interface is created, a macvlan filter is added to these already created channels (VSIs). This patch utilizes subordinate device traffic classes to make queue groups(channels) available for an upper device like a macvlan. Steps to configure macvlan offloads: 1. ethtool -K ethx l2-fwd-offload on 2. ip link add link ethx name macvlan1 type macvlan 3. ip addr add <address> dev macvlan1 4. ip link set macvlan1 up Signed-off-by: Harshitha Ramamurthy <harshitha.ramamurthy@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-06-28ixgbevf: Use cached link state instead of re-reading the value for ethtoolAlexander Duyck
Change the ethtool link settings call to just read the cached state out of the adapter structure instead of trying to recheck the value from the PF. Doing this should prevent excessive reading of the mailbox. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Reviewed-by: "Guilherme G. Piccoli" <gpiccoli@canonical.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-06-28iavf: fix dereference of null rx_buffer pointerColin Ian King
A recent commit efa14c3985828d ("iavf: allow null RX descriptors") added a null pointer sanity check on rx_buffer, however, rx_buffer is being dereferenced before that check, which implies a null pointer dereference bug can potentially occur. Fix this by only dereferencing rx_buffer until after the null pointer check. Addresses-Coverity: ("Dereference before null check") Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-06-28igb: add RR2DCDELAY to ethtool registers dumpArtem Bityutskiy
This patch adds the RR2DCDELAY register to the ethtool registers dump. RR2DCDELAY exists on I210 and I211 Intel Gigabit Ethernet chips and it stands for "Read Request To Data Completion Delay". Here is how this register is described in the I210 datasheet: "This field captures the maximum PCIe split time in 16 ns units, which is the maximum delay between the read request to the first data completion. This is giving an estimation of the PCIe round trip time." In other words, whenever I210 reads from the host memory (e.g., fetches a descriptor from the ring), the chip measures every PCI DMA read transaction and captures the maximum value. So it ends up containing the longest DMA transaction time. This register is very useful for troubleshooting and research purposes. If you are dealing with time-sensitive networks, this register can help you get an idea of your "I210-to-ring" latency. This helps answering questions like "should I have PCIe ASPM enabled?" or "should I enable deep C-states?" on my system. It is safe to read this register at any point, reading it has no effect on the I210 chip functionality. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-06-28igb: minor ethool regdump amendmentArtem Bityutskiy
This patch has no functional impact and it is just a preparation for the following patch. It removes an early return from the 'igb_get_regs()' function by moving the 82576-only registers dump into an "if" block. With this preparation, we can dump more non-82576 registers at the end of this function. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-06-28iavf: Fix up debug print macroJeff Kirsher
This aligns the iavf_debug() macro with the other Intel drivers. Add the bus number, bus_id field to i40e_bus_info so output shows each physical port(i.e func) in following format: [[[[<domain>]:]<bus>]:][<slot>][.[<func>]] domains are numbered from 0 to ffff), bus (0-ff), slot (0-1f) and function (0-7). Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
2019-06-28e1000e: Reduce boot time by tightening sleep rangesArjan van de Ven
The e1000e driver is a great user of the usleep_range() API, and has nice ranges that in principle help power management. However the ranges that are used only during system startup are very long (and can add easily 100 msec to the boot time) while the power savings of such long ranges is irrelevant due to the one-off, boot only, nature of these functions. This patch shrinks some of the longest ranges to be shorter (while still using a power friendly 1 msec range); this saves 100msec+ of boot time on my BDW NUCs Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-06-28iavf: use struct_size() helperGustavo A. R. Silva
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes, in particular in the context in which this code is being used. So, replace code of the following form: sizeof(struct virtchnl_ether_addr_list) + (count * sizeof(struct virtchnl_ether_addr)) with: struct_size(veal, list, count) and so on... This code was detected with the help of Coccinelle. Signed-off-by: "Gustavo A. R. Silva" <gustavo@embeddedor.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-06-28e1000: Use dma_wmb() instead of wmb() before doorbell writesVenkatesh Srinivas
e1000 writes to doorbells to post transmit descriptors and fill the receive ring. After writing descriptors to memory but before writing to doorbells, use dma_wmb() rather than wmb(). wmb() is more heavyweight than necessary for a device to see descriptor writes. On x86, this avoids SFENCEs before doorbell writes in both the Tx and Rx paths. On ARM, this converts DSB ST -> DMB OSHST. Tested: 82576EB / x86; QEMU (qemu emulates an 8257x) Signed-off-by: Venkatesh Srinivas <venkateshs@google.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-06-28ixgbe: fix potential u32 overflow on shiftColin Ian King
The u32 variable rem is being shifted using u32 arithmetic however it is being passed to div_u64 that expects the expression to be a u64. The 32 bit shift may potentially overflow, so cast rem to a u64 before shifting to avoid this. Also remove comment about overflow. Addresses-Coverity: ("Unintentional integer overflow") Fixes: cd4583206990 ("ixgbe: implement support for SDP/PPS output on X550 hardware") Fixes: 68d9676fc04e ("ixgbe: fix PTP SDP pin setup on X540 hardware") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-06-28ixgbe: Avoid NULL pointer dereference with VF on non-IPsec hwDann Frazier
An ipsec structure will not be allocated if the hardware does not support offload. Fixes the following Oops: [ 191.045452] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 191.054232] Mem abort info: [ 191.057014] ESR = 0x96000004 [ 191.060057] Exception class = DABT (current EL), IL = 32 bits [ 191.065963] SET = 0, FnV = 0 [ 191.069004] EA = 0, S1PTW = 0 [ 191.072132] Data abort info: [ 191.074999] ISV = 0, ISS = 0x00000004 [ 191.078822] CM = 0, WnR = 0 [ 191.081780] user pgtable: 4k pages, 48-bit VAs, pgdp = 0000000043d9e467 [ 191.088382] [0000000000000000] pgd=0000000000000000 [ 191.093252] Internal error: Oops: 96000004 [#1] SMP [ 191.098119] Modules linked in: vhost_net vhost tap vfio_pci vfio_virqfd vfio_iommu_type1 vfio xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 xt_tcpudp bridge stp llc ebtable_filter devlink ebtables ip6table_filter ip6_tables iptable_filter bpfilter ipmi_ssif nls_iso8859_1 input_leds joydev ipmi_si hns_roce_hw_v2 ipmi_devintf hns_roce ipmi_msghandler cppc_cpufreq sch_fq_codel ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 ses enclosure btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor hid_generic usbhid hid raid6_pq libcrc32c raid1 raid0 multipath linear ixgbevf hibmc_drm ttm [ 191.168607] drm_kms_helper aes_ce_blk aes_ce_cipher syscopyarea crct10dif_ce sysfillrect ghash_ce qla2xxx sysimgblt sha2_ce sha256_arm64 hisi_sas_v3_hw fb_sys_fops sha1_ce uas nvme_fc mpt3sas ixgbe drm hisi_sas_main nvme_fabrics usb_storage hclge scsi_transport_fc ahci libsas hnae3 raid_class libahci xfrm_algo scsi_transport_sas mdio aes_neon_bs aes_neon_blk crypto_simd cryptd aes_arm64 [ 191.202952] CPU: 94 PID: 0 Comm: swapper/94 Not tainted 4.19.0-rc1+ #11 [ 191.209553] Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.20.01 04/26/2019 [ 191.218064] pstate: 20400089 (nzCv daIf +PAN -UAO) [ 191.222873] pc : ixgbe_ipsec_vf_clear+0x60/0xd0 [ixgbe] [ 191.228093] lr : ixgbe_msg_task+0x2d0/0x1088 [ixgbe] [ 191.233044] sp : ffff000009b3bcd0 [ 191.236346] x29: ffff000009b3bcd0 x28: 0000000000000000 [ 191.241647] x27: ffff000009628000 x26: 0000000000000000 [ 191.246946] x25: ffff803f652d7600 x24: 0000000000000004 [ 191.252246] x23: ffff803f6a718900 x22: 0000000000000000 [ 191.257546] x21: 0000000000000000 x20: 0000000000000000 [ 191.262845] x19: 0000000000000000 x18: 0000000000000000 [ 191.268144] x17: 0000000000000000 x16: 0000000000000000 [ 191.273443] x15: 0000000000000000 x14: 0000000100000026 [ 191.278742] x13: 0000000100000025 x12: ffff8a5f7fbe0df0 [ 191.284042] x11: 000000010000000b x10: 0000000000000040 [ 191.289341] x9 : 0000000000001100 x8 : ffff803f6a824fd8 [ 191.294640] x7 : ffff803f6a825098 x6 : 0000000000000001 [ 191.299939] x5 : ffff000000f0ffc0 x4 : 0000000000000000 [ 191.305238] x3 : ffff000028c00000 x2 : ffff803f652d7600 [ 191.310538] x1 : 0000000000000000 x0 : ffff000000f205f0 [ 191.315838] Process swapper/94 (pid: 0, stack limit = 0x00000000addfed5a) [ 191.322613] Call trace: [ 191.325055] ixgbe_ipsec_vf_clear+0x60/0xd0 [ixgbe] [ 191.329927] ixgbe_msg_task+0x2d0/0x1088 [ixgbe] [ 191.334536] ixgbe_msix_other+0x274/0x330 [ixgbe] [ 191.339233] __handle_irq_event_percpu+0x78/0x270 [ 191.343924] handle_irq_event_percpu+0x40/0x98 [ 191.348355] handle_irq_event+0x50/0xa8 [ 191.352180] handle_fasteoi_irq+0xbc/0x148 [ 191.356263] generic_handle_irq+0x34/0x50 [ 191.360259] __handle_domain_irq+0x68/0xc0 [ 191.364343] gic_handle_irq+0x84/0x180 [ 191.368079] el1_irq+0xe8/0x180 [ 191.371208] arch_cpu_idle+0x30/0x1a8 [ 191.374860] do_idle+0x1dc/0x2a0 [ 191.378077] cpu_startup_entry+0x2c/0x30 [ 191.381988] secondary_start_kernel+0x150/0x1e0 [ 191.386506] Code: 6b15003f 54000320 f1404a9f 54000060 (79400260) Fixes: eda0333ac2930 ("ixgbe: add VF IPsec management") Signed-off-by: Dann Frazier <dann.frazier@canonical.com> Acked-by: Shannon Nelson <snelson@pensando.io> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-06-28e1000e: Increase pause and refresh timeMiguel Bernal Marin
Suggested-by: Tim Pepper <timothy.c.pepper@linux.intel.com> Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-06-28ice: Use struct_size() helperGustavo A. R. Silva
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = alloc(size, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: size = struct_size(instance, entry, count); This code was detected with the help of Coccinelle. Signed-off-by: "Gustavo A. R. Silva" <gustavo@embeddedor.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-06-28Merge branch 'net-sched-Add-txtime-assist-support-for-taprio'David S. Miller
Vedang Patel says: ==================== net/sched: Add txtime-assist support for taprio. Changes in v6: - Use _BITUL() instead of BIT() in UAPI for etf. (patch #1) - Fix a bug reported by kbuild test bot in length_to_duration(). (patch #6) - Remove an unused function (get_cycle_start()). (Patch #6) Changes in v5: - Commit message improved for the igb patch (patch #1). - Fixed typo in commit message for etf patch (patch #2). Changes in v4: - Remove inline directive from functions in foo.c. - Fix spacing in pkt_sched.h (for etf patch). Changes in v3: - Simplify implementation for taprio flags. - txtime_delay can only be set if txtime-assist mode is enabled. - txtime_delay and flags will only be visible in tc output if set by user. - Minor changes in error reporting. Changes in v2: - Txtime-offload has now been renamed to txtime-assist mode. - Renamed the offload parameter to flags. - Removed the code which introduced the hardware offloading functionality. Original Cover letter (with above changes included) -------------------------------------------------- Currently, we are seeing packets being transmitted outside their timeslices. We can confirm that the packets are being dequeued at the right time. So, the delay is induced after the packet is dequeued, because taprio, without any offloading, has no control of when a packet is actually transmitted. In order to solve this, we are making use of the txtime feature provided by ETF qdisc. Hardware offloading needs to be supported by the ETF qdisc in order to take advantage of this feature. The taprio qdisc will assign txtime (in skb->tstamp) for all the packets which do not have the txtime allocated via the SO_TXTIME socket option. For the packets which already have SO_TXTIME set, taprio will validate whether the packet will be transmitted in the correct interval. In order to support this, the following parameters have been added: - flags (taprio): This is added in order to support different offloading modes which will be added in the future. - txtime-delay (taprio): This indicates the minimum time it will take for the packet to hit the wire after it reaches taprio_enqueue(). This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. - skip_skb_check (ETF): ETF currently drops any packet which does not have the SO_TXTIME socket option set. This check can be skipped by specifying this option. Following is an example configuration: tc qdisc replace dev $IFACE parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time $BASE_TIME \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 200000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf \\ offload delta 200000 clockid CLOCK_TAI skip_skb_check Here, the "flags" parameter is indicating that the txtime-assist mode is enabled. Also, all the traffic classes have been assigned the same queue. This is to prevent the traffic classes in the lower priority queues from getting starved. Note that this configuration is specific to the i210 ethernet card. Other network cards where the hardware queues are given the same priority, might be able to utilize more than one queue. Following are some of the other highlights of the series: - Fix a bug where hardware timestamping and SO_TXTIME options cannot be used together. (Patch 1) - Introduces the skip_skb_check option. (Patch 2) - Make TxTime assist mode work with TCP packets (Patch 7). The following changes are recommended to be done in order to get the best performance from taprio in this mode: ip link set dev enp1s0 mtu 1514 ethtool -K eth0 gso off ethtool -K eth0 tso off ethtool --set-eee eth0 eee off ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28taprio: Adjust timestamps for TCP packetsVedang Patel
When the taprio qdisc is running in "txtime offload" mode, it will set the launchtime value (in skb->tstamp) for all the packets which do not have the SO_TXTIME socket option. But, the TCP packets already have this value set and it indicates the earliest departure time represented in CLOCK_MONOTONIC clock. We need to respect the timestamp set by the TCP subsystem. So, convert this time to the clock which taprio is using and ensure that the packet is not transmitted before the deadline set by TCP. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28taprio: make clock reference conversions easierVedang Patel
Later in this series we will need to transform from CLOCK_MONOTONIC (used in TCP) to the clock reference used in TAPRIO. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28taprio: Add support for txtime-assist modeVedang Patel
Currently, we are seeing non-critical packets being transmitted outside of their timeslice. We can confirm that the packets are being dequeued at the right time. So, the delay is induced in the hardware side. The most likely reason is the hardware queues are starving the lower priority queues. In order to improve the performance of taprio, we will be making use of the txtime feature provided by the ETF qdisc. For all the packets which do not have the SO_TXTIME option set, taprio will set the transmit timestamp (set in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit time for the packet is set to when the gate is open. If SO_TXTIME is set, the TAPrio qdisc will validate whether the timestamp (in skb->tstamp) occurs when the gate corresponding to skb's traffic class is open. Following two parameters added to support this mode: - flags: used to enable txtime-assist mode. Will also be used to enable other modes (like hardware offloading) later. - txtime-delay: This indicates the minimum time it will take for the packet to hit the wire. This is useful in determining whether we can transmit the packet in the remaining time if the gate corresponding to the packet is currently open. An example configuration for enabling txtime-assist: tc qdisc replace dev eth0 parent root handle 100 taprio \\ num_tc 3 \\ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\ queues 1@0 1@0 1@0 \\ base-time 1558653424279842568 \\ sched-entry S 01 300000 \\ sched-entry S 02 300000 \\ sched-entry S 04 400000 \\ flags 0x1 \\ txtime-delay 40000 \\ clockid CLOCK_TAI tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\ offload delta 200000 clockid CLOCK_TAI Note that all the traffic classes are mapped to the same queue. This is only possible in taprio when txtime-assist is enabled. Also, note that the ETF Qdisc is enabled with offload mode set. In this mode, if the packet's traffic class is open and the complete packet can be transmitted, taprio will try to transmit the packet immediately. This will be done by setting skb->tstamp to current_time + the time delta indicated in the txtime-delay parameter. This parameter indicates the time taken (in software) for packet to reach the network adapter. If the packet cannot be transmitted in the current interval or if the packet's traffic is not currently transmitting, the skb->tstamp is set to the next available timestamp value. This is tracked in the next_launchtime parameter in the struct sched_entry. The behaviour w.r.t admin and oper schedules is not changed from what is present in software mode. The transmit time is already known in advance. So, we do not need the HR timers to advance the schedule and wakeup the dequeue side of taprio. So, HR timer won't be run when this mode is enabled. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28taprio: Remove inline directiveVedang Patel
Remove inline directive from length_to_duration(). We will let the compiler make the decisions. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28taprio: calculate cycle_time when schedule is installedVedang Patel
cycle time for a particular schedule is calculated only when it is first installed. So, it makes sense to just calculate it once right after the 'cycle_time' parameter has been parsed and store it in cycle_time. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28etf: Add skip_sock_checkVedang Patel
Currently, etf expects a socket with SO_TXTIME option set for each packet it encounters. So, it will drop all other packets. But, in the future commits we are planning to add functionality where tstamp value will be set by another qdisc. Also, some packets which are generated from within the kernel (e.g. ICMP packets) do not have any socket associated with them. So, this commit adds support for skip_sock_check. When this option is set, etf will skip checking for a socket and other associated options for all skbs. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28etf: Don't use BIT() in UAPI headers.Vedang Patel
The BIT() macro isn't exported as part of the UAPI interface. So, the compile-test to ensure they are self contained fails. So, use _BITUL() instead. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28igb: clear out skb->tstamp after reading the txtimeVedang Patel
If a packet which is utilizing the launchtime feature (via SO_TXTIME socket option) also requests the hardware transmit timestamp, the hardware timestamp is not delivered to the userspace. This is because the value in skb->tstamp is mistaken as the software timestamp. Applications, like ptp4l, request a hardware timestamp by setting the SOF_TIMESTAMPING_TX_HARDWARE socket option. Whenever a new timestamp is detected by the driver (this work is done in igb_ptp_tx_work() which calls igb_ptp_tx_hwtstamps() in igb_ptp.c[1]), it will queue the timestamp in the ERR_QUEUE for the userspace to read. When the userspace is ready, it will issue a recvmsg() call to collect this timestamp. The problem is in this recvmsg() call. If the skb->tstamp is not cleared out, it will be interpreted as a software timestamp and the hardware tx timestamp will not be successfully sent to the userspace. Look at skb_is_swtx_tstamp() and the callee function __sock_recv_timestamp() in net/socket.c for more details. Signed-off-by: Vedang Patel <vedang.patel@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28Merge branch 'mirred-recurse'David S. Miller
John Hurley says: ==================== Track recursive calls in TC act_mirred These patches aim to prevent act_mirred causing stack overflow events from recursively calling packet xmit or receive functions. Such events can occur with poor TC configuration that causes packets to travel in loops within the system. Florian Westphal advises that a recursion crash and packets looping are separate issues and should be treated as such. David Miller futher points out that pcpu counters cannot track the precise skb context required to detect loops. Hence these patches are not aimed at detecting packet loops, rather, preventing stack flows arising from such loops. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: sched: protect against stack overflow in TC act_mirredJohn Hurley
TC hooks allow the application of filters and actions to packets at both ingress and egress of the network stack. It is possible, with poor configuration, that this can produce loops whereby an ingress hook calls a mirred egress action that has an egress hook that redirects back to the first ingress etc. The TC core classifier protects against loops when doing reclassifies but there is no protection against a packet looping between multiple hooks and recursively calling act_mirred. This can lead to stack overflow panics. Add a per CPU counter to act_mirred that is incremented for each recursive call of the action function when processing a packet. If a limit is passed then the packet is dropped and CPU counter reset. Note that this patch does not protect against loops in TC datapaths. Its aim is to prevent stack overflow kernel panics that can be a consequence of such loops. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: sched: refactor reinsert actionJohn Hurley
The TC_ACT_REINSERT return type was added as an in-kernel only option to allow a packet ingress or egress redirect. This is used to avoid unnecessary skb clones in situations where they are not required. If a TC hook returns this code then the packet is 'reinserted' and no skb consume is carried out as no clone took place. This return type is only used in act_mirred. Rather than have the reinsert called from the main datapath, call it directly in act_mirred. Instead of returning TC_ACT_REINSERT, change the type to the new TC_ACT_CONSUMED which tells the caller that the packet has been stolen by another process and that no consume call is required. Moving all redirect calls to the act_mirred code is in preparation for tracking recursion created by act_mirred. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28ipv4: enable route flushing in network namespacesChristian Brauner
Tools such as vpnc try to flush routes when run inside network namespaces by writing 1 into /proc/sys/net/ipv4/route/flush. This currently does not work because flush is not enabled in non-initial network namespaces. Since routes are per network namespace it is safe to enable /proc/sys/net/ipv4/route/flush in there. Link: https://github.com/lxc/lxd/issues/4257 Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28Merge tag 'batadv-next-for-davem-20190627v2' of ↵David S. Miller
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This feature/cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - fix includes for _MAX constants, atomic functions and fwdecls, by Sven Eckelmann (3 patches) - shorten multicast tt/tvlv worker spinlock section, by Linus Luessing - routeable multicast preparations: implement MAC multicast filtering, by Linus Luessing (2 patches, David Millers comments integrated) - remove return value checks for debugfs_create, by Greg Kroah-Hartman - add routable multicast optimizations, by Linus Luessing (2 patches) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28Merge branch 'hns3-next'David S. Miller
Huazhong Tan says: ==================== net: hns3: some code optimizations & cleanups & bugfixes [patch 01/12] fixes a TX timeout issue. [patch 02/12 - 04/12] adds some patch related to TM module. [patch 05/12] fixes a compile warning. [patch 06/12] adds Asym Pause support for autoneg [patch 07/12] optimizes the error handler for VF reset. [patch 08/12] deals with the empty interrupt case. [patch 09/12 - 12/12] adds some cleanups & optimizations. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: hns3: optimize the CSQ cmd error handlingPeng Li
If CMDQ ring is full, hclge_cmd_send may return directly, but IMP still working and HW pointer changed, SW ring pointer do not match the HW pointer. This patch update the SW pointer every time when the space is full, so it can work normally next time if IMP and HW still working. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: hns3: remove RXD_VLD check in hns3_handle_bdinfoYunsheng Lin
The HNS3_RXD_VLD_B bit has already been checked in hns3_add_frag or hns3_handle_rx_bd before calling hns3_handle_bdinfo, so when hns3_handle_bdinfo is called, the HNS3_RXD_VLD_B bit is always set, which makes the checking in hns3_handle_bdinfo unnecessary. This patch removes the RXD_VLD_B checking in hns3_handle_bdinfo. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: hns3: remove unused linkmode definitionJian Shen
This patch removes unused linkmode definition. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: hns3: fix a statistics issue about l3l4 checksum errorYufeng Mo
The frame column is based on rx_crc_errors and rx_frame_errors. So l3l4 checksum error should not be counted by rx_crc_errors. Instead, l3l4 checksum error should be counted in ifconfig error column. Fixes: d3ec4ef66937 ("net: hns3: refactor the statistics updating for netdev") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: hns3: handle empty unknown interruptHuazhong Tan
Since some MSI-X interrupt's status may be cleared by hardware, so when the driver receives the interrupt, reading HCLGE_VECTOR0_PF_OTHER_INT_STS_REG register will get an empty unknown interrupt. For this case, the irq handler should enable vector0 interrupt. This patch also use dev_info() instead of dev_dbg() in the hclge_check_event_cause(), since this information will be useful for normal usage. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: hns3: re-schedule reset task while VF reset failHuazhong Tan
The VF reset may fail for some probabilistic reasons, such as wait for hardware reset timeout, wait for mailbox response timeout, so this patch tries to re-schedule the reset task when the number of reset failing is under HCLGEVF_RESET_MAX_FAIL_CNT. This patch also add a function hclgevf_reset_err_handle() to handle the reset failing. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: hns3: add Asym Pause support to fix autoneg problemYonglong Liu
Local device and link partner config auto-negotiation on both, local device config pause frame use as: rx on/tx off, link partner config pause frame use as: rx off/tx on. We except the result is: Local device: Autonegotiate: on RX: on TX: off RX negotiated: on TX negotiated: off Link partner: Autonegotiate: on RX: off TX: on RX negotiated: off TX negotiated: on But actually, the result of Local device and link partner is both: Autonegotiate: on RX: off TX: off RX negotiated: off TX negotiated: off The root cause is that the supported flag is has only Pause, reference to the function genphy_config_advert(): static int genphy_config_advert(struct phy_device *phydev) { ... linkmode_and(phydev->advertising, phydev->advertising, phydev->supported); ... } The pause frame use of link partner is rx off/tx on, so its advertising only set the bit Asym_Pause, and the supported is only set the bit Pause, so the result of linkmode_and(), is rx off/tx off. This patch adds Asym_Pause to the supported flag to fix it. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: hns3: fix a -Wformat-nonliteral compile warningYonglong Liu
When setting -Wformat=2, there is a compiler warning like this: hclge_main.c:xxx:x: warning: format not a string literal and no format arguments [-Wformat-nonliteral] strs[i].desc); ^~~~ This patch adds missing format parameter "%s" to snprintf() to fix it. Fixes: 46a3df9f9718 ("Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: hns3: add some error checking in hclge_tm moduleYunsheng Lin
When hdev->tx_sch_mode is HCLGE_FLAG_VNET_BASE_SCH_MODE, the hclge_tm_schd_mode_vnet_base_cfg calls hclge_tm_pri_schd_mode_cfg with vport->vport_id as pri_id, which is used as index for hdev->tm_info.tc_info, it will cause out of bound access issue if vport_id is equal to or larger than HNAE3_MAX_TC. Also hardware only support maximum speed of HCLGE_ETHER_MAX_RATE. So this patch adds two checks for above cases. Fixes: 848440544b41 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2026-09-22 16:28:55 +0000