| Age | Commit message (Collapse) | Author |
|---|
|
Pull smb server fixes from Steve French:
- Fix smbdirect (RDMA) disconnect hang bug
- Fix potential Denial of Service when connection limit exceeded
- Fix smbdirect (RDMA) connection (potentially accessing freed memory)
bug
* tag 'v6.18-rc5-smb-server-fixes' of git://git.samba.org/ksmbd:
smb: server: let smb_direct_disconnect_rdma_connection() turn CREATED into DISCONNECTED
ksmbd: close accepted socket when per-IP limit rejects connection
smb: server: rdma: avoid unmapping posted recv on accept failure
|
|
The purpose of commit 703eec1b2422 ("virtio_net: fixing XDP for fully
checksummed packets handling") is to record the flags in advance, as
their value may be overwritten in the XDP case. However, the flags
recorded under big mode are incorrect, because in big mode, the passed
buf does not point to the rx buffer, but rather to the page of the
submitted buffer. This commit fixes this issue.
For the small mode, the commit c11a49d58ad2 ("virtio_net: Fix mismatched
buf address when unmapping for small packets") fixed it.
Tested-by: Alyssa Ross <hi@alyssa.is>
Fixes: 703eec1b2422 ("virtio_net: fixing XDP for fully checksummed packets handling")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20251111090828.23186-1-xuanzhuo@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-11-12
this is a pull request of 11 patches for net-next/main.
The first 3 patches are by Vadim Fedorenko and convert the CAN drivers
to use the ndo_hwtstamp callbacks.
Maud Spierings contributes a patch for the mcp251x driver that
converts it to use dev_err_probe().
The next 6 patches target the mcp251xfd driver and are by Gregor
Herburger and me. They add GPIO controller functionality to the
driver.
The final patch is by Chu Guangqing and fixes a typo in the bxcan
driver.
linux-can-next-for-6.19-20251112-2
* tag 'linux-can-next-for-6.19-20251112-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: bxcan: Fix a typo error for assign
dt-bindings: can: mcp251xfd: add gpio-controller property
can: mcp251xfd: add gpio functionality
can: mcp251xfd: only configure PIN1 when rx_int is set
can: mcp251xfd: add workaround for errata 5
can: mcp251xfd: utilize gather_write function for all non-CRC writes
can: mcp251xfd: move chip sleep mode into runtime pm
can: mcp251x: mcp251x_can_probe(): use dev_err_probe()
can: peak_usb: convert to use ndo_hwtstamp callbacks
can: peak_canfd: convert to use ndo_hwtstamp callbacks
can: convert generic HW timestamp ioctl to ndo_hwtstamp callbacks
====================
Link: https://patch.msgid.link/20251112184344.189863-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
"Address recently reported issues or issues found at the recent NFS
bake-a-thon held in Raleigh, NC.
Issues reported with v6.18-rc:
- Address a kernel build issue
- Reorder SEQUENCE processing to avoid spurious NFS4ERR_SEQ_MISORDERED
Issues that need expedient stable backports:
- Close a refcount leak exposure
- Report support for NFSv4.2 CLONE correctly
- Fix oops during COPY_NOTIFY processing
- Prevent rare crash after XDR encoding failure
- Prevent crash due to confused or malicious NFSv4.1 client"
* tag 'nfsd-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
Revert "SUNRPC: Make RPCSEC_GSS_KRB5 select CRYPTO instead of depending on it"
nfsd: ensure SEQUENCE replay sends a valid reply.
NFSD: Never cache a COMPOUND when the SEQUENCE operation fails
NFSD: Skip close replay processing if XDR encoding fails
NFSD: free copynotify stateid in nfs4_free_ol_stateid()
nfsd: add missing FATTR4_WORD2_CLONE_BLKSIZE from supported attributes
nfsd: fix refcount leak in nfsd_set_fh_dentry()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fixes from Marek Szyprowski:
- two minor fixes for DMA API infrastructure: restoring proper
structure padding used in benchmark tests (Qinxin Xia) and global
DMA_BIT_MASK macro rework to make it a bit more clang friendly (James
Clark)
* tag 'dma-mapping-6.18-2025-11-12' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-mapping: Allow use of DMA_BIT_MASK(64) in global scope
dma-mapping: benchmark: Restore padding to ensure uABI remained consistent
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
- Fix a Rust build error
- Fix exception/interrupt, memory management, perf event, hardware
breakpoint, kexec and KVM bugs
* tag 'loongarch-fixes-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Fix max supported vCPUs set with EIOINTC
LoongArch: KVM: Skip PMU checking on vCPU context switch
LoongArch: KVM: Restore guest PMU if it is enabled
LoongArch: KVM: Add delay until timer interrupt injected
LoongArch: KVM: Set page with write attribute if dirty track disabled
LoongArch: kexec: Print out debugging message if required
LoongArch: kexec: Initialize the kexec_buf structure
LoongArch: Use correct accessor to read FWPC/MWPC
LoongArch: Refine the init_hw_perf_events() function
LoongArch: Remove __GFP_HIGHMEM masking in pud_alloc_one()
LoongArch: Let {pte,pmd}_modify() record the status of _PAGE_DIRTY
LoongArch: Consolidate max_pfn & max_low_pfn calculation
LoongArch: Consolidate early_ioremap()/ioremap_prot()
LoongArch: Use physical addresses for CSR_MERRENTRY/CSR_TLBRENTRY
LoongArch: Clarify 3 MSG interrupt features
rust: Add -fno-isolate-erroneous-paths-dereference to bindgen_skip_c_flags
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha
Pull alpha fix from Matt Turner:
"Add Magnus as a maintainer of the alpha port"
* tag 'alpha-fixes-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
MAINTAINERS: Add Magnus Lindholm as maintainer for alpha port
|
|
Russell King says:
====================
net: stmmac: convert glue drivers to use stmmac_get_phy_intf_sel()
This series converts the remaining glue drivers that support
multi-interface to use stmmac_get_phy_intf_sel(). The reason these
drivers are not converted to the set_phy_intf_sel() method is
because it is unclear whether there are ordering dependencies that
would prevent it.
For example, reading the stm32mp2 documentation, it is required to
set the ETH1_SEL field while the dwmac core is in reset and before
clocks are enabled. This requirement can not be satsified at the
moment (but could with further changes.)
====================
Link: https://patch.msgid.link/aRLvrfx6tOa-RhrY@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use stmmac_get_phy_intf_sel() to decode the PHY interface mode to the
phy_intf_sel value, validate the result and use that to set the
control register to select the operating mode for the DWMAC core.
Note that this will allow GMII as well as MII as the phy_intf_sel
value is the same for both.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vIjUe-0000000DquB-3JDY@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert dwmac-visconti to use the PHY_INTF_SEL_x definitions. The
original definitions used constant 0, BIT(0) (==1) and BIT(2) (==4)
to define these, but the values of the bits corresponds with the
PHY_INTF_SEL_x values, so it is highly likely that these are not
individual bits, but the PHY_INTF_SEL_x bitfield.
This removes this incorrect use of BIT().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vIjUZ-0000000Dqu5-2sDI@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use stmmac_get_phy_intf_sel() to decode the PHY interface mode to the
phy_intf_sel value. As both configure functions would end up with the
same code, call this from stm32mp1_set_mode(), validate the result and
pass the resulting value into the stm32 configure function. Use this
value to set the operating mode for the DWMAC core.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vIjUU-0000000Dqtz-2PwT@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rather than defining separate constants for each, use the
PHY_INTF_SEL_x definitions in the switch()es configuring the
control register, and use one FIELD_PREP() to convert phy_intf_sel
to the register value.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vIjUP-0000000Dqtt-1bYn@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert dwmac-stm32 to use the PHY_INTF_SEL_x definitions.
For stm32mp1, the original definitions used constant 0 (GMII, 0 << 21),
BIT(21) (RGMII, 1 << 21) and BIT(23) (RMII, 4 << 21) to define these,
but from the values it can be clearly seen that these are the
PHY_INTF_SEL_x inputs to the dwmac.
For stm32mp2, the original definitions cover a bitfield 6:4 in the
SYSCFG Ethernet1 control register (according to documentation) and use
the PHY_INTF_SEL_x values.
Use the common dwmac definitions for the PHY interface selection field
by adding the bitfield mask, and using FIELD_PREP() for the bitfield
values.
This removes this incorrect use of BIT().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vIjUK-0000000Dqtn-1AyK@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use stmmac_get_phy_intf_sel() to decode the PHY interface mode to the
phy_intf_sel value, validate the result and use that to set the
control register to select the operating mode for the DWMAC core.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://patch.msgid.link/E1vIjUF-0000000Dqth-0gwD@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the common dwmac definitions for the PHY interface selection field.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://patch.msgid.link/E1vIjUA-0000000Dqtb-0AfP@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the phy_intf_sel field value when deciding what other options to
apply for the configuration register.
Note that this will allow GMII as well as MII as the phy_intf_sel
value is the same for both.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vIjU4-0000000DqtV-3qsX@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use stmmac_get_phy_intf_sel() to decode the PHY interface mode to the
phy_intf_sel value, validate the result, and pass that into the
implementation specific ->dwmac_set_phy_interface() method. Use this
to configure the PHY interface selection field.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vIjTz-0000000DqtP-3N9v@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use PHY_INTF_SEL_x definitions for the fields that correspond to the
phy_intf_sel inputs to the dwmac core.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vIjTu-0000000DqtI-2sUB@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use stmmac_get_phy_intf_sel() to decode the PHY interface mode to the
phy_intf_sel value, validate the result and use that to set the
control register to select the operating mode for the DWMAC core.
Note that this will allow GMII as well as MII as the phy_intf_sel
value is the same for both.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vIjTp-0000000DqtC-2DmI@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the PHY_INTF_SEL_xx values directly in ls1c_dwmac_syscon_init(),
converting them to the PHY_INTF_SELI bitfield when calling
regmap_update_bits().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vIjTk-0000000Dqt6-1gN9@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use PHY_INTF_SEL_x definitions for phy_intf_sel bitfield.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the variable in case user has a custom install binary.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20251111155214.2760711-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For NICs with a large (1024+) number of queues, this test can cause
excessive memory fragmentation. This results in OOM errors, and in the
worst case driver/kernel crashes. We don't need to test with the max number
of queues, just enough to create a high likelihood of races between
reconfiguration and stats getting read.
Signed-off-by: Dimitri Daskalakis <dimitri.daskalakis1@gmail.com>
Link: https://patch.msgid.link/20251111225319.3019542-1-dimitri.daskalakis1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the spelling error of "assign".
Signed-off-by: Chu Guangqing <chuguangqing@inspur.com>
Reviewed-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://patch.msgid.link/20251103074009.4708-1-chuguangqing@inspur.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com> says:
The mcp251xfd allows two pins to be configured as GPIOs. This series adds
support for this feature.
The GPIO functionality is controlled with the IOCON register which has an
erratum.
Patch 1 from https://lore.kernel.org/linux-can/20240429-mcp251xfd-runtime_pm-v1-3-c26a93a66544@pengutronix.de/
Patch 2 refactor of no-crc functions to prepare workaround for non-crc writes
Patch 3 is the fix/workaround for the aforementioned erratum
Patch 4 only configure pin1 for rx-int
Patch 5 adds the gpio support
Patch 6 updates dt-binding
https://lore.kernel.org/all/20240806-industrious-augmented-crane-44239a-mkl@pengutronix.de/
Link: https://patch.msgid.link/20251001091006.4003841-1-viken.dadhaniya@oss.qualcomm.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The mcp251xfd has two pins that can be used as gpio. Add gpio-controller
property to binding description.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251001091006.4003841-7-viken.dadhaniya@oss.qualcomm.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The mcp251xfd devices allow two pins to be configured as gpio. Add this
functionality to driver.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
Tested-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251001091006.4003841-6-viken.dadhaniya@oss.qualcomm.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
When rx_int is used th mcp251xfd_chip_rx_int_enable and
mcp251xfd_chip_rx_int_disable function configure both PIN0 and PIN1. To
prepare the support of the GPIOS only configure PIN1 with
regmap_update_bits.
This way PIN0 can be used as GPIO while PIN1 is used as rx_int
interrupt.
Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
Tested-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251001091006.4003841-5-viken.dadhaniya@oss.qualcomm.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
According to Errata DS80000789E 5 writing IOCON register using one SPI
write command clears LAT0/LAT1.
Errata Fix/Work Around suggests to write registers with single byte write
instructions. However, it seems that every write to the second byte
causes the overwrite of LAT0/LAT1.
Never write byte 2 of IOCON register to avoid clearing of LAT0/LAT1.
Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
Tested-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251001091006.4003841-4-viken.dadhaniya@oss.qualcomm.com
[mkl: add missing MCP251XFD_REG_IOCON_GPIO_MASK]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
More -next material, notably:
- split ieee80211.h file, it's way too big
- mac80211: initial chanctx work towards NAN
- mac80211: MU-MIMO sniffer improvements
- ath12k: statistics improvements
* tag 'wireless-next-2025-11-12' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (26 commits)
wifi: cw1200: Fix potential memory leak in cw1200_bh_rx_helper()
wifi: mac80211: make monitor link info check more specific
wifi: mac80211: track MU-MIMO configuration on disabled interfaces
wifi: cfg80211/mac80211: Add fallback mechanism for INDOOR_SP connection
wifi: cfg80211/mac80211: clean up duplicate ap_power handling
wifi: cfg80211: use a C99 initializer in wiphy_register
wifi: cfg80211: fix doc of struct key_params
wifi: mac80211: remove unnecessary vlan NULL check
wifi: mac80211: pass frame type to element parsing
wifi: mac80211: remove "disabling VHT" message
wifi: mac80211: add and use chanctx usage iteration
wifi: mac80211: simplify ieee80211_recalc_chanctx_min_def() API
wifi: mac80211: remove chanctx to link back-references
wifi: mac80211: make link iteration safe for 'break'
wifi: mac80211: fix EHT typo
wifi: cfg80211: fix EHT typo
wifi: ieee80211: split NAN definitions out
wifi: ieee80211: split P2P definitions out
wifi: ieee80211: split S1G definitions out
wifi: ieee80211: split EHT definitions out
...
====================
Link: https://patch.msgid.link/20251112115126.16223-4-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Couple more fixes:
- mwl8k: work around FW expecting a DSSS element in beacons
- ath11k: report correct TX status
- iwlwifi: avoid toggling links due to wrong element use
- iwlwifi: fix beacon template rate on older devices
- iwlwifi: fix loop iterator being used after loop
- mac80211: disallow address changes while using the address
- mac80211: avoid bad rate warning in monitor/sniffer mode
- hwsim: fix potential NULL deref (on monitor injection)
* tag 'wireless-2025-11-12' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: mld: always take beacon ies in link grading
wifi: iwlwifi: mvm: fix beacon template/fixed rate
wifi: iwlwifi: fix aux ROC time event iterator usage
wifi: mwl8k: inject DSSS Parameter Set element into beacons if missing
wifi: mac80211_hwsim: Fix possible NULL dereference
wifi: mac80211: skip rate verification for not captured PSDUs
wifi: mac80211: reject address change while connecting
wifi: ath11k: zero init info->status in wmi_process_mgmt_tx_comp()
====================
Link: https://patch.msgid.link/20251112114621.15716-5-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Improve the readibility of the code setting ndev->max_mtu. This depends
on the hardware specific maximum defined by the MAC core, and also a
platform provided maximum.
The code was originally checking that the platform specific maximum was
between ndev->min_mtu..MAC core maximum before reducing ndev->max_mtu,
otherwise if the platform specific maximum was less than ndev->min_mtu,
issuing a warning.
Re-order the code to handle the case where the platform specific max is
below ndev->min_mtu, which then means that the subsequent test is
simply reducing ndev->max_mtu.
Update the comment, and add a few blank lines to separate the blocks of
code.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vImWA-0000000DrIl-1HZY@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This adds support for chip RTL8125K. Its XID is 0x68a. It is basically
based on the one with XID 0x688, but with different firmware file.
Signed-off-by: javen <javen_xu@realsil.com.cn>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/20251111092851.3371-1-javen_xu@realsil.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
skb_release_head_state() inlines skb_orphan().
We need to clear skb->sk otherwise we can freeze TCP flows
on a mostly idle host, because skb_fclone_busy() would
return true as long as the packet is not yet processed by
skb_defer_free_flush().
Fixes: 1fcf572211da ("net: allow skb_release_head_state() to be called multiple times")
Fixes: e20dfbad8aab ("net: fix napi_consume_skb() with alien skbs")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Aditya Garg <gargaditya@linux.microsoft.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251111151235.1903659-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The sit driver's packet transmission path calls: sit_tunnel_xmit() ->
update_or_create_fnhe(), which lead to fnhe_remove_oldest() being called
to delete entries exceeding FNHE_RECLAIM_DEPTH+random.
The race window is between fnhe_remove_oldest() selecting fnheX for
deletion and the subsequent kfree_rcu(). During this time, the
concurrent path's __mkroute_output() -> find_exception() can fetch the
soon-to-be-deleted fnheX, and rt_bind_exception() then binds it with a
new dst using a dst_hold(). When the original fnheX is freed via RCU,
the dst reference remains permanently leaked.
CPU 0 CPU 1
__mkroute_output()
find_exception() [fnheX]
update_or_create_fnhe()
fnhe_remove_oldest() [fnheX]
rt_bind_exception() [bind dst]
RCU callback [fnheX freed, dst leak]
This issue manifests as a device reference count leak and a warning in
dmesg when unregistering the net device:
unregister_netdevice: waiting for sitX to become free. Usage count = N
Ido Schimmel provided the simple test validation method [1].
The fix clears 'oldest->fnhe_daddr' before calling fnhe_flush_routes().
Since rt_bind_exception() checks this field, setting it to zero prevents
the stale fnhe from being reused and bound to a new dst just before it
is freed.
[1]
ip netns add ns1
ip -n ns1 link set dev lo up
ip -n ns1 address add 192.0.2.1/32 dev lo
ip -n ns1 link add name dummy1 up type dummy
ip -n ns1 route add 192.0.2.2/32 dev dummy1
ip -n ns1 link add name gretap1 up arp off type gretap \
local 192.0.2.1 remote 192.0.2.2
ip -n ns1 route add 198.51.0.0/16 dev gretap1
taskset -c 0 ip netns exec ns1 mausezahn gretap1 \
-A 198.51.100.1 -B 198.51.0.0/16 -t udp -p 1000 -c 0 -q &
taskset -c 2 ip netns exec ns1 mausezahn gretap1 \
-A 198.51.100.1 -B 198.51.0.0/16 -t udp -p 1000 -c 0 -q &
sleep 10
ip netns pids ns1 | xargs kill
ip netns del ns1
Cc: stable@vger.kernel.org
Fixes: 67d6d681e15b ("ipv4: make exception cache less predictible")
Signed-off-by: Chuang Wang <nashuiliang@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251111064328.24440-1-nashuiliang@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Bobby Eshleman says:
====================
selftests/vsock: refactor and improve vmtest infrastructure
This patch series refactors the vsock selftest VM infrastructure to
improve test run times, improve logging, and prepare for future tests
which make heavy usage of these refactored functions and have new
requirements such as simultaneous QEMU processes.
====================
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-0-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Disable shellcheck rules SC2317 and SC2119. These rules are being
triggered due to false positives. For SC2317, many `return
"${KSFT_PASS}"` lines are reported as unreachable, even though they are
executed during normal runs. For SC2119, the fact that
log_guest/log_host accept either stdin or arguments triggers SC2119,
despite being valid.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-12-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add vsock_loopback module loading to the loopback test so that vmtest.sh
can be used for kernels built with loopback as a module.
This is not technically a fix as kselftest expects loopback to be
built-in already (defined in selftests/vsock/config). This is useful
only for using vmtest.sh outside of kselftest.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-11-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Testing with 1.37 shows all tests passing but emits the warning:
warning: vng version 'virtme-ng 1.37' has not been tested and may not function properly.
The following versions have been tested: 1.33 1.36
This patch adds 1.37 to the virtme-ng versions to get rid of the above
warning.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-10-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the definition for BUILD and initialize it to zero. This avoids
'bash -u vmtest.sh` from throwing 'unbound variable' when BUILD is not
set to 1 and is later checked for its value.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-9-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation for future patches that introduce tests that cannot
re-use the same VM, add functions to identify those that *can* re-use a
VM.
By continuing to re-use the same VM for these tests we can save time by
avoiding the delay of booting a VM for every test.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-8-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add check_result() function to reuse logic for incrementing the
pass/fail counters. This function will get used by different callers as
we add different types of tests in future patches (namely, namespace and
non-namespace tests will be called at different places, and re-use this
function).
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-7-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Reduce the time waiting for the QEMU pidfile from three minutes to five
seconds. The three minute time window was chosen to make sure QEMU had
enough time to fully boot up. This, however, is an unreasonably long
delay for QEMU to write the pidfile, which happens earlier when the QEMU
process starts (not after VM boot). The three minute delay becomes
noticeably wasteful in future tests that expect QEMU to fail and wait a
full three minutes for a pidfile that will never exist.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-6-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If QEMU fails to boot, then set the returncode (via timeout) instead of
unconditionally dying. This is in preparation for tests that expect QEMU
to fail to boot. In that case, we just want to know if the boot failed
or not so we can test the pass/fail criteria, and continue executing the
next test.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-5-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Change QEMU to use generated pidfile names instead of just a single
globally-defined pidfile. This allows multiple QEMU instances to
co-exist with different pidfiles. This is required for future tests that
use multiple VMs to check for CID collissions.
Additionally, this also places the burden of killing the QEMU process
and cleaning up the pidfile on the caller of vm_start(). To help with
this, a function terminate_pidfiles() is introduced that callers use to
perform the cleanup. The terminate_pidfiles() function supports multiple
pidfile removals because future patches will need to process two
pidfiles at a time.
Change QEMU_OPTS to be initialized inside the vm_start(). This allows
the generated pidfile to be passed to the string assignment, and
prepares for future vm-specific options as well (e.g., cid).
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-4-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add wrapper functions vm_vsock_test() and host_vsock_test() to invoke
the vsock_test binary. This encapsulates several items of repeat logic,
such as waiting for the server to reach listening state and
enabling/disabling the bash option pipefail to avoid pipe-style logging
from hiding failures.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-3-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rewrite wait_for_listener()'s pattern matching to avoid tripping the
if-condition when pipefail is on.
awk doesn't gracefully handle SIGPIPE with a non-zero exit code, so grep
exiting upon finding a match causes false-positives when the pipefail
option is used (grep exits, SIGPIPE emits, and awk complains with a
non-zero exit code). Instead, move all of the pattern matching into awk
so that SIGPIPE cannot happen and the correct exit code is returned.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-2-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Improve usability of logging functions. Remove the test name prefix from
logging functions so that logging calls can be made deeper into the call
stack without passing down the test name or setting some global. Teach
log function to accept a LOG_PREFIX variable to avoid unnecessary
argument shifting.
Remove log_setup() and instead use log_host(). The host/guest prefixes
are useful to show whether a failure happened on the guest or host side,
but "setup" doesn't really give additional useful information. Since all
log_setup() calls happen on the host, lets just use log_host() instead.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-1-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git patches for v6.19 (#2)
Just one 2-patch series for this PR.
Once pulled into wireless-next, ath-next will fast-forward, and that
will provide the baseline for merging ath12k-ng into ath-next.
==================
Link: https://patch.msgid.link/15a98cae-0274-45f4-9b8e-be6fa9720884@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Miri Korenblit says:
====================
iwlwifi fixes:
- avoid link toggling
- fix beacon template rate
- don't use iterator outside the loop
====================
Link: https://patch.msgid.link/DM3PPF63A6024A9E52FF4A7B23F283B7FC7A3CCA@DM3PPF63A6024A9.namprd11.prod.outlook.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
