summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2026-10-21net: phy: Represent PHY-less SFP modules with phy_portMaxime Chevallier
Now that the SFP bus infrastructure notifies when PHY-less modules are connected, we can create a phy_port to represent it. Instead of letting the SFP subsystem handle that, the Bus' upstream is in charge of maintaining that phy_port and register it to the topology, as the upstream (in this case a phy device) is directly interacting with the underlying net_device. Add a phy_caps helper to get the achievable modes on this module based on what the phy_port representing the bus supports. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Aleksei Sviridkin <f@lex.la> Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org> Tested-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20261016133107.54054-6-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-10-21net: phy: Create SFP phy_port before registering upstreamMaxime Chevallier
When dealing with PHY-driven SFP, we create a phy_port representing the SFP bus when we know we have such a bus. We can move the port creation before registering the sfp upstream ops, as long as we know the SFP bus is there. This will allow passing the phy_port along with the upstream information to the SFP bus. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Aleksei Sviridkin <f@lex.la> Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org> Tested-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20261016133107.54054-5-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-10-21net: phylink: Register a phy_port for MAC-driven SFP cagesMaxime Chevallier
phy_port tracks the interfaces that a netdevice feeds into. SFP cages are such ports, but so far we are only tracking the ones that are driven by PHYs acting as media-converters. Let's populate a phy_port for MAC driven SFP cages, handled by phylink. This phy_port represents the SFP cage itself, and not the module that may be plugged into it. It's therefore not an MDI interface, so only the 'interfaces' field is relevant here. The phy_port is only populated for 'NETDEV' phylink instances, as otherwise we don't have any topology to attach the port to. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Aleksei Sviridkin <f@lex.la> Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org> Tested-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20261016133107.54054-4-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-10-21net: phy: phy_link_topology: Track ports in phy_link_topologyMaxime Chevallier
phy_port is aimed at representing the various physical interfaces of a net_device. They can be controlled by various components in the link, such as the Ethernet PHY, the Ethernet MAC, and SFP module, etc. Let's therefore make so we keep track of all the ports connected to a netdev in phy_link_topology. The only ports added for now are phy-driven ports. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Aleksei Sviridkin <f@lex.la> Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org> Tested-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20261016133107.54054-3-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-10-21net: phy: phy_link_topology: Add a helper for opportunistic allocMaxime Chevallier
The phy_link_topology structure stores information about the PHY-related components connected to a net_device. It is opportunistically allocated, when we add the first item to the topology, as this is not relevant for all kinds of net_devices. In preparation for the addition of phy_port tracking in the topology, let's make a dedicated helper for that allocation sequence. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Aleksei Sviridkin <f@lex.la> Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org> Tested-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20261016133107.54054-2-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-10-21docs: core-api: include documentation from linux/uaccess.hJonathan Corbet
Documentation/core-api/mm-api.rst brings in documentation from the x86-specific version of uaccess.h, but many of the functions in common use are documentation in include/linux/uaccess.h instead. Incorporate that documentation as well. Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2026-10-21perf bench: Add atomic operations benchmarkChangbin Du
Add a new 'atomic' collection to perf bench for benchmarking atomic read-modify-write operations with multi-threaded contention testing. It provides two subcommands: - atomic cas: contended compare-and-swap operations (__atomic_compare_exchange_n) - atomic inc: contended fetch-add operations (__atomic_fetch_add) Both support a configurable thread count and runtime to measure atomic contention effects. Why this benchmark is needed: - Atomic read-modify-write operations are fundamental to lock-free algorithms and data structures. Understanding their performance characteristics under contention is critical for designing high-performance concurrent applications. - The benchmark helps identify atomic operation latency and scalability issues across different thread counts, revealing contention patterns that are not visible in single-threaded tests. - Useful for evaluating atomic implementation quality on different architectures and for regression testing after changes to atomic primitives or memory ordering. Measurement methodology: - By default two threads contend for the counter, enough to expose the contention effect; use -t to scale the count. - Each thread starts a private timer (clock_gettime CLOCK_MONOTONIC) after synchronizing on a pthread_barrier, ensuring all threads begin simultaneously. - Each thread performs a hot loop of the selected atomic operation (compare-and-swap or fetch-add) on a shared unsigned long counter for a fixed runtime. It counts its own completed operations in a local variable, and the loop runs in batches so the termination flag is only polled between batches. - The main thread sleeps for the runtime and then sets the flag; the throughput of a repeat is the total operation count divided by the measured wall time (the max per-thread runtime). - The shared counter is cache-line aligned (64 bytes) to isolate contention to the target cache line and avoid false sharing. - The per-thread operation counts of the last repeat show whether any thread failed to make progress under contention. - The first repeat is excluded from statistics as a warmup phase to avoid cache-cold effects. Example usage: $ perf bench atomic all # Running atomic/cas benchmark... Threads: 2, runtime: 2 sec, repeats: 10 (warmup: 1) Avg throughput: 68,599,954 ops/sec (+- 0.13%) Per-thread ops (last repeat): fastest: 74,842,112 ops slowest: 63,176,704 ops avg: 69,009,408 ops # Running atomic/inc benchmark... Threads: 2, runtime: 2 sec, repeats: 10 (warmup: 1) Avg throughput: 128,428,772 ops/sec (+- 0.54%) Per-thread ops (last repeat): fastest: 146,230,272 ops slowest: 112,825,344 ops avg: 129,527,808 ops Output fields explained: - Threads: number of contending threads - runtime: seconds each thread runs per repeat - repeats: number of test runs (first is warmup) - Avg throughput: mean aggregate ops/sec across repeats - +- %: relative standard error of the mean throughput across repeats - Per-thread ops: fastest/slowest/avg operations per thread in the last repeat (shows scheduling imbalance and lack of progress) Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Changbin Du <changbin.du@gmail.com> Assisted-by: opencode:DeepSeek-V4-Pro Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-10-21perf lock contention: Filter events before creating lock_statIan Rogers
In report_lock_contention_begin_event(), lock_stat_findnew() was called before checking filters.nr_types (-Y), filters.nr_addrs (-L), and match_callstack_filter() (-S). When a filtered-out lock event (such as a mutex contention when running with -Y spinlock) shared the same aggregation key as a subsequent matching event (for example, contention on the mutex's internal wait_lock spinlock from the same caller), the first event created the lock_stat entry with the filtered-out lock's flags and the second event reused that entry, causing non-spinlock entries to appear in -Y spinlock output. Check the type, address, and callstack filters before looking up or creating the lock_stat entry. Fixes: b4a7eff93c39f985 ("perf lock contention: Add -Y/--type-filter option") Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Ian Rogers <irogers@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-10-21Merge tag 'acpi-7.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI support updates from Rafael Wysocki: "The most significant change here is the rework of the core ACPI device enumeration code to avoid initializing ACPI power management prematurely for devices with unmet dependencies. This essentially is a problem fix, but it requires taking PCI device enumeration ordering into account among other things, so it is far from straightforward. There was an attempt to do this in the 7.3 time frame that had to be reverted, so this time it is done much more carefully. There is also an ACPI thermal control update rearranging the code to register thermal class cooling devices under specific parents, which is visible in sysfs. This helps to figure out what is represented by those devices much more easily, but it also allows the binding of cooling devices to trip points in thermal zones to be adjusted so it need not rely on specific cooling device data usage in thermal drivers. From the number of commits perspective, the most visible part is the one replacing acpi_get_first_physical_node() with acpi_bus_get_primary_device() everywhere and dropping the former that was inherently racy and generally unsafe to use. Fortunately, the maintainers involved responded timely and all of that could be done within one development cycle. Another quite visible part is Dave Jiang's series fixing multiple issues reported by Sashiko in the ACPI APEI support code with a PCI AER improvement on top. It took several iterations of this to make Sashiko happy and the code in question should be much more robust going forward. One other thing worth mentioning separately is that the ACPI bus type is now going to be registered as a "companion" one and it will not be possible to register a driver binding directly to a struct acpi_device. All of the existing users of those drivers in the tree were converted to platform drivers in the previous cycles, so this is just a final step in a longer journey. Apart from the above, there are many fixes, mostly in drivers, with a noticeable exception of a fix in the code binding devices to their ACPI companions, new IOVT IOMMU support in ACPICA, new _Ixx object support for suspend-to-idle on x86, multiple new quirks, mostly related to unused ACPI power resources and backlight handling, and assorted cleanups. Specifics: - Make the core ACPI device enumeration code stop attempting to initialize ACPI power management for devices before they are known to be present and functional (Rafael Wysocki) - Simplify and clean up the core ACPI device enumeration code on top of the previous adjustment and reduce debug noise coming from it (Rafael Wysocki) - Fix locking in the code binding devices to their ACPI companions, prevent it from replacing a valid ACPI companion pointer with NULL incidentally, improve its messaging (including debug noise reduction), and reduce its overhead by making it skip the cases in which no ACPI companion may exist early (Rafael Wysocki) - Reduce runtime memory footprint of struct acpi_device by rearranging fields in it (Andy Shevchenko) - Update the driver core to allow bus types without drivers to be registered as "companion bus types" without driver-related sysfs attributes and register the ACPI bus type as a companion one (Rafael Wysocki) - Use strscpy() instead of strcpy() in the ACPI sysfs interface (Ruslan Vagner) - Remove __meminitdata from hmat_adist_nb declaration preserving it even when CONFIG_MEMORY_HOTPLUG is not set to prevent notifier chain corruption in some cases (Alejandro Lucero) - Prevent a NULL pointer dereference when attempting to read the table length after a mapping bookkeeping failure during an initrd override invocation with permanent table mappings enabled (Slavin Liu) - Use for_each_populated_zone() in get_node_num() in the MRRM table pareser (Sang-Heon Jeon) - Use vsnprintf() in acpi_os_vprintf() to prevent memory corruption resulting from overly long diagnostic messages that may not fit into a static buffer used by ACPICA and may be produced by a malformed ACPI table (Vlatko Kosturjak) - Ignore leading root scope prefix in string _UID match to allow AMD IOMMU matching to work as expected in some cases (Mario Limonciello) - Adjust message printing macros for ACPI objects to use dev_fmt() for more consistency with the analogous dev_*() macros (Rafael Wysocki) - Add _Ixx GPE wake indicator support to the x86 suspend-to-idle handling code (Saranya Gopal) - Clear driver_data before free in the ACPI PCI Link driver to prevent a dangling pointer from being used later (Jiale Yao) - Accumulate the queued flag across error sections of a CPER record in ghes_do_proc() to prevent it from being cleared by a later section or entry that does not queue memory-failure work (Breno Leitao) - Map a raw PCI AER Capability image field by field to prevent information loss from occurring while processing it (Dave Jiang) - Update a stale driver source reference in the ACPI APEI EINJ driver documentation (Prabhakar Pujeri) - Reject CPER records with an out-of-range error_data_length or an error status block length wrapping a u32 in the EFI CPER driver (Dave Jiang) - Address multiple assorted issues in the ACPI extlog driver (Dave Jiang) - Address two issues related to CXL in the ACPI APEI GHES driver (Dave Jiang) - Read only validated fields in cper_mem_err_pack() (Dave Jiang) - Validate memory error section length before payload access, prevent writes past array bounds from occurring and sanitize software metadata in the ACPI APEI GHES driver (Dave Jiang) - Make cxl_cper_handle_prot_err() static (Dave Jiang) - Add IOVT IOMMU support to ACPICA (Bibo Mao) - Fix PCC OperationRegion command offsets in ACPICA (Sudeep Holla) - Fix memory leak in acpi_ds_create_field() related to the handling of internal_pcc_buffer allocations (Breno Leitao) - Fix memory leak due to leftover devm_kcalloc() argument in the ACPI fan driver (Rafael Wysocki) - Fix backlight unregistration ordering in the ACPI video bus device driver (Rafael Wysocki) - Update the thermal core to allow the registration of thermal class cooling devices under specific parents and convert the ACPI fan, ACPI processor, and ACPI video bus device drivers to do so (Rafael Wysocki) - Adjust the ACPI thermal zone driver to use thermal class cooling device parent information for binding cooling devices to trip points in thermal zones (Rafael Wysocki) - Use cooling device data that is a better match for a given driver instead of a struct acpi_device pointer that had to be used for this purpose previously in the ACPI fan and processor drivers (Rafael Wysocki) - Fix acpi_thermal_guess_offset() in the ACPI thermal zone driver for thermal zone devices with a 273.0°K offset (Hans de Goede) - Define a free for ACPI objects allocated by ACPICA helpers and use it to simplify AML error handling in the ACPI fan driver (Rafael Wysocki) - Switch over the users of acpi_get_first_physical_node(), that was inherently racy and therefore not really safe to use, to use its replacement acpi_bus_get_primary_device(), and eliminate the former (Rafael Wysocki) - Add !CONFIG_ACPI stubs for acpi_find_child_device() and acpi_device_uid() (Mario Limonciello and Robin Murphy) - Fix bogus cycle count values on systems without _BIX in the ACPI battery driver (Armin Wolf) - Fix NULL pointer dereference on allocation failure and report relative state of charge as CAPACITY in the ACPI SBS driver (Itay Shem-tov and Guangshuo Li) - Add lid_init_state quirk for Razer Blade Stealth 13 (Early 2020) RZ09-0310 to the ACPI button driver (Ian Gallagher) - Add new quirks to force the native backlight on Dell OptiPlex AIO 7410 35W and Acer Nitro AN515-58 in the ACPI video bus device driver (Chitransh Mandhaniya and Dirga Yuza) - Fix the shared memory signature handling in the ACPI PCC address space handler, free the PCC mailbox channel on operation region deactivation, and avoid unnecessary repeated computations of the PCC operation region command timeout (Sudeep Holla) - Fix a log message typo in the ACPI NUMA support code (Hemanth Selam) - Zero-initialize capability query result in the ACPI Platform Firmware Runtime Update and Telemetry driver to avoid disclosure of kernel stack data to user space (Karl Mehltretter) - Replace the remaining built-in/module check for CONFIG_ACPI_WMI in a header file with IS_ENABLED() macro (Lalit Shankar Chowdhury) - Retry probing battery docks after hotplug in the ACPI docking station driver to avoid missing ACPI add notifications (Vibhor Goel) - Detach device after resource transition failure in pnp_device_probe() to avoid blocking later manual PNP configuration attempts (Myeonghun Pak)" * tag 'acpi-7.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (90 commits) ACPI: PM: Add Acer Aspire A515-53G to dmi_leave_unused_power_resources_on[] ACPI: video: force native backlight on Dell OptiPlex AIO 7410 35W ACPI: PM: sleep: Drop unused sleep_no_lps0 define ACPI: PM: Add unused power resource quirk for Casper Excalibur G900 ACPI: dock: Retry probing battery docks after hotplug ACPI: PCI: pci_link: clear driver_data before free ACPI: APEI: accumulate the queued flag across error sections ACPICA: actbl2.h: Add bit constants of the Flags field in the IOVT IOMMU structure ACPI: bus: Drop acpi_get_first_physical_node() efi/dev-path-parser: Switch to use acpi_bus_get_primary_device() ALSA: hda: tas2781: Switch to use acpi_bus_get_primary_device() ALSA: hda: cs35l41: Switch to use acpi_bus_get_primary_device() iommu/arm-smmu-v3: Switch to use acpi_bus_get_primary_device() PCI/AER: Map a raw AER Capability image field by field ACPI: NUMA: fix typo in log message ACPI: Add stub for acpi_find_child_device() driver core/ACPI: Introduce companion_bus_register() ACPI: PCC: Cache OpRegion command timeout ACPI: PCC: Free channel on OpRegion deactivation ACPI: PCC: Preserve shared memory signature in OpRegion handler ...
2026-10-21Merge tag 'timers-vdso-2026-10-20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull VDSO updates from Thomas Gleixner: "Updates for the VDSO subsystem: - Ensure that the CLOCK_AUX base calculations are properly scaled against the base timekeeper. The update function failed to take the fractional nanosecond part into account, which results in a rounding error. - Cleanup and consolidate the vsyscall headers to get rid of pointless copies all over the architectures. - Replace a runtime conditional in the time getter function for namespaced clocks by simple pointer arithmetic which speeds up the read function" * tag 'timers-vdso-2026-10-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: vdso/vsyscall: Keep the CLOCK_AUX base scaled vdso/math64: Add and use __iter_div64_u64_rem() vdso/math64: Use OPTIMIZER_HIDE_VAR() in __iter_div_u64_rem() vdso/gettimeofday: Avoid runtime conditional in do_hres_timens() vdso: Remove __ASSEMBLER__ guards from vsyscall.h vdso: Add asm-generic/vdso/vsyscall.h vdso: Remove unnecessary vdso/vsyscall.h includes riscv/hwprobe: Include vdso/datapage.h arm64/vdso: Delete asm/vdso/vsyscall.h inclusions x86/vdso: Delete asm/vdso/vsyscall.h inclusions sparc/vdso: Delete asm/vdso/vsyscall.h inclusion s390/vdso: Delete asm/vdso/vsyscall.h inclusions sparc/vdso: Move __VDSO_PAGES to asm/vdso.h x86/vdso: Move vDSO page definitions to asm/vdso.h vdso: Delete asm-generic/vdso/vsyscall.h vdso/vsyscall: Define fallback time synchronization functions in vsyscall.c vdso/getrandom: Define fallback __arch_get_vdso_u_rng_data() in getrandom.c vdso/gettimeofday: Define fallback __arch_get_vdso_u_time_data() in gettimeofday.c vdso: Move the kernel-side time update helpers to a new header
2026-10-21sched_ext: Reject oversized automatic CID shardsHui Su
Automatic topology packing starts a new shard before adding a core when the current shard would exceed its target size. However, a first core is always accepted so that cores remain indivisible. An indivisible core with more than SCX_CID_SHARD_MAX_CPUS CPUs cannot be represented without exceeding the hard shard limit. Per-shard state uses fixed-size inline cmask storage sized for SCX_CID_SHARD_MAX_CPUS. Passing an oversized shard to alloc_pshard() can therefore make cmask initialization overwrite the following fields. Reject an indivisible core larger than SCX_CID_SHARD_MAX_CPUS before adding it to a shard. Existing non-empty shard splitting already keeps the total within the hard cap, while an indivisible core may still exceed cid_shard_size when it fits within the hard limit. Report the oversized core and the hard limit with scx_error() so that the rejection is diagnosable. tj: The bug is only reproducible with artificial VM topologies. It can't happen on real hardware. Fixes: e2c841b91bf9 ("sched_ext: Add CID sharding") Reviewed-by: Andrea Righi <arighi@nvidia.com> Tested-by: Andrea Righi <arighi@nvidia.com> Signed-off-by: Hui Su <sh_def@163.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2026-10-21Merge tag 'timers-nohz-2026-10-20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull NOHZ updates from Thomas Gleixner: "Updates for the tick/NOHZ machinery: - Add the BLOCK_SOFTIRQ to the hotplug safe local softirq pending mask to prevent false positive error messages. A BLOCK_SOFTIRQ can be pending when a CPU goes offline as the subsequent cleanup will take care of the outstanding completions. - Remove a few redundant invocations of local_irq_save/restore() and timekeeping_max_deferment() to speed up the NOHZ idle transitions" * tag 'timers-nohz-2026-10-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick/nohz: Avoid unused timekeeping_max_deferment() calls tick/nohz: Remove redundant local_irq_save()/restore() tick/nohz: Add BLOCK_SOFTIRQ to the hotplug safe mask
2026-10-21Merge tag 'timers-core-2026-10-20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer core updates from Thomas Gleixner: "Updates for the core timekeeping and timers subsystem: - Futher cleanups for the POSIX timer exit/exec related code to simplify the code flow and to make it more robust against future changes. - Prevent tearing of timekeeper::ktime_sec which can be accessed without the sequence count protection. The timekeeper is updated by memcpy() with an uneven sequence count to force readers into the retry path. On 64-bit machine the ktime_sec member can be accessed atomically without the sequence count protection. That is only correct when the update side memcpy() guarantees atomicity at the 64-bit granularity. That's not guaranteed due to debug options, compilers and instruction availability. If the memcpy() does not provide the atomicity then the unprotected readers can observe store tearing. To prevent this write the ktime_sec member before the memcpy() so that a non-atomic memcpy() will write the same data. A similar fix has been done for the xtime_sec member, but the ktime_sec equivalent was missed. - Prevent time64_to_tm() day truncation on 32-bit kernels The function receives a 64-bit seconds value but stores the quotient of the computation in a long, which truncates the result for large input values. Cure this by using div_s64_rem() which stores the quotient in s64 and only leaves the seconds-within-day reminder in a long, which is guaranteed to fit. This fix comes with a corresponding kunit test to prevent further mishaps. - Mark data-racy accesses to the hrtimer_sleeper::task member. The recent updates to KCSAN flagged these benign races. Annotate them with new helper functions, convert all existing usage sites and mark the task member private after that so that future users which fail to use the helpers can be detected automatically. - Address similar benign KCSAN flagged issues in the hrtimer, timer and timer migration code. - Fixes for a few selftest issues" * tag 'timers-core-2026-10-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits) selftests/timers: clocksource-switch: Fix unchecked open()/read() selftests: timers: Measure the CPU timers on the clock they count selftests: timers: Count what tick is worth in the drift estimate time/kunit: Add time64_to_tm() case beyond 32-bit day count time: Prevent time64_to_tm() day truncation on 32-bit timekeeping: Use READ_ONCE/WRITE_ONCE() for ktime_sec to prevent tearing timers/migration: Mark racy updates to tmigr_event::ignore field timers: Mark racy updates to hlist_node::pprev field hrtimer: Apply READ_ONCE() to lockless base->running loads hrtimer: Mark the hrtimer_sleeper structure's ->task field __private hrtimer: Update hrtimer_resolution only if value changes futex: Use accessor for hrtimer_sleeper ->task field in requeue rtmutex: Use accessor for hrtimer_sleeper ->task field net: pktgen: Use accessor for hrtimer_sleeper ->task field timers: Use accessor for hrtimer_sleeper ->task field in sleep_timeout.c futex: Use accessor for hrtimer_sleeper ->task field in waitwake.c io-uring/rw: Use accessor for hrtimer_sleeper ->task field wait: Use accessor for hrtimer_sleeper ->task field aio: Use accessor for hrtimer_sleeper ->task field hrtimer: Mark data-racy accesses to hrtimer_sleeper ->task field ...
2026-10-21Merge tag 'timers-clocksource-2026-10-20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull clocksource updates from Thomas Gleixner: "Updates for clocksource and clockevent drivers: - Support for the Renesas RZ/N1 timers - Rework of the per CPU and per cluster MIPS GIC timers to improve performance, sched clock precision and to add VDSO support. - The usual assorted pile of small fixes and improvements all over the place" * tag 'timers-clocksource-2026-10-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/timer-ti-dm: Handle runtime resume failure clocksource/drivers/timer-mediatek: Request and enable the bus clock clocksource/drivers/timer-mediatek: Convert to OF probing clocksource/drivers/timer-mediatek: Fix random crash at boot clocksource/drivers/timer-econet-en751221: Fix clock reference leak clocksource/drivers/digicolor: Fix clk reference leak on request_irq failure clocksource/drivers/fttmr010: Fix clk reference leak in error paths clocksource/drivers/dbx500-prcmu: Check timer register mapping clocksource/drivers/timer-ti-dm: Register clocksource/event only for am654 clocksource/drivers/mips-gic-timer: Use local counter on synced multi-cluster systems clocksource/drivers/mips-gic-timer: Simplify gic_next_event() for per-cpu timer MAINTAINERS: Add the Renesas RZ/N1 timers driver entry clocksource/drivers: Add support for the Renesas RZ/N1 timers dt-bindings: timer: Add the Renesas RZ/N1 timer
2026-10-21Merge tag 'irq-drivers-2026-10-20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq chip driver updates from Thomas Gleixner: "Updates for interrupt chip drivers: - Remove the futile attempts to cleanup resources when the probing of the main interrupt chip fails for SiFIVE/PLIC devices. If that probe fails the system will stall immediately afterwards in the boot process without reaching a state where the error could be diagnosed. The lack of resource cleanup led to a frenzy of AI detected/assisted "fixes" which just make the code pretend to be correct for no value. Remove the existing half baked cleanup and immediately panic the machine when the probe fails. That's far more useful than letting it proceed and stall out a millisecond later with no information about the root cause. - A series of fixes for the ARM GIC-V3 driver addressing a potential double free, a bitmask overrun on 32-bit ARM and a OF node leak. - Automatically set the IRQ_DOMAIN_FLAG_DESTROY_GC when a interrupt domain is created that also allocates the generic interrupt chip during domain creation. That removes the requirement for manually setting the flag in the domain creation info structure when it contains a valid entry for allocating the generic interrupt chip. Remove the therefore redundant setters of IRQ_DOMAIN_FLAG_DESTROY_GC in the existing drivers. - Add support for Annapurna Labs FIC version 2 and 3 and implement affinity control for the demultiplexed interrupts by utilizing the recently merged interrupt redirection infrastructure. - Convert the ACPI device ID structures to named initializers - Consolidate the IPI related constants for RISC-V interrupt controllers - Add support for Qualcomm Purwa SoC interrupt chip and consolidate the workaround for the previous version in Hamoa SoCs. - The usual small fixes and improvements all over the place" * tag 'irq-drivers-2026-10-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits) irqchip/al-fic: Support per-child affinity via interrupt redirection irqchip/al-fic: Add support for FIC v3 irqchip/al-fic: Support error and fatal outputs and FIC v2 dt-bindings: interrupt-controller: amazon,al-fic: Add mask selection irqchip/al-fic: Switch to shared parent interrupt irqchip/al-fic: Keep the device_node instead of a cached name string irqchip/al-fic: Use %pOF and raise init log level irqchip/al-fic: Use %pe to print init error irqchip/al-fic: Fix coding style issues irqchip: Use named initializers for acpi_device_id irqchip/gic-v5: Fix standalone IRSes OF probe dt-bindings: interrupt-controller: gicv5: Relax IRS properties constraints irqchip/renesas-rzv2h: Preserve TIEN state in rzv2h_tint_set_type() irqchip/loongson-eiointc: Use pa_to_nid() rather than hard-code irqchip/riscv-imsic: Expose the fwnode via the global config irqchip/meson-gpio: Allow the GPIO interrupts to wake the system irqchip/gic-v3: Ensure change to DS is visible irqchip/mips-gic: Transfer interrupt mask state across clusters irqchip/mips-gic: Fix recursive acquisition of gic_lock in gic_set_affinity() irqchip/mips-gic: Fix unbalanced cm_core_lock in for_each_online_cpu_gic() ...
2026-10-21Merge tag 'irq-core-2026-10-20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Updates for the generic interrupt subsystem: - Skip programming of MSI/MSI-X related data while a PCI channel is offline (Link is down) in the error recovery code path. Accessing an offline channel results in a BUS error which affects the underlying Root Port. Check for pci_channel_offline() and if true avoid the writes and just cache the modifications which are subsequently applied when the Link has recovered. - Prevent a stack UAF when a faulting interrupt thread exits. On X86 the crash causes the stack to be discarded, which contains the callback head for the exit task_work to run the destructor. If the stack is clobbered before the destructor runs, then the indirect call of the task work function ends up in a random place. Move the callback head into the interrupt action to prevent that. - Prevent an UAF in the interrupt thread exit code which can happen when a faulting interrupt thread exits and races with a concurrent free_irq() by synchronizing free_irq() against thread exit. - Ensure that interrupt context accounting is accurate on interrupt return when checking for soft interrupt invocation. The code removed the hard interrupt context prematurely so that the subsequent code appeared to be in task context according to the preempt counter. That confuses ftrace, perf and K*SAN which get their recording context wrong. On Preempt-RT this can result in misbehaviour when BPF programs are attached to the affected region. Cure it by preserving the hard interrupt count up to the point where soft interrupts are actually invoked and switch directly to soft interrupt processing right there. That avoids the intermediate "in task context" state. - The usual small fixes and improvements" * tag 'irq-core-2026-10-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/proc: Fix missing CPU header in /proc/interrupts PCI/MSI: Skip MSI/MSI-X programming while the channel is offline genirq: Fix typos in comments genirq: Move interrupt thread exit_work object to irqaction genirq: Defer kfree(irqaction) until irq_thread_dtor() finishes softirq: Preserve interrupt context on return from interrupt softirq: Remove redundant h->action from preempt_count mismatch error genirq: Discard cpumask of irqaffinity= boot parameter if parsing fails
2026-10-21nvme-auth: update error log in nvme_auth_submit()Martin George
nvme_auth_submit() issues both AUTH Send and AUTH Receive commands, but the failure messages are hardcoded to "auth_send failed", which can be misleading when an AUTH Receive fails. So print the correct direction instead. Reviewed-by: Hannes Reinecke <hare@kernel.org> Signed-off-by: Martin George <marting@netapp.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2026-10-21Merge tag 'csd-lock.2026.10.12a' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull CSD lock updates from Paul McKenney: "Report CSD-lock stall recovery time: - Refactor to simplify csd_lock_wait_toolong() function prototype - Report time required to recover from a CSD-lock stall - Add a test of this reporting" * tag 'csd-lock.2026.10.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: lib/test_csd_lock: Add a module to stall a CPU on a CSD lock locking/csd-lock: Report how long a stuck CSD lock took to recover locking/csd-lock: Pack csd_lock_wait_toolong() state into a struct
2026-10-21mshv_vtl: reject poll files with multiple waitqueuesDaehyeon Ko
MSHV_SET_POLL_FILE invokes a file descriptor poll callback with a poll table backed by a single embedded wait entry. A poll callback may, however, register the table with more than one waitqueue. pipe_poll() does this naturally for an O_RDWR FIFO. The second registration currently warns but then inserts the same list node into another list. The new insertion overwrites the entry links while the first waitqueue still points at it, corrupting the first waitqueue and causing an invalid callback traversal when that queue wakes. Reject a second distinct waitqueue, remove the first registration through the common removal helper, and return -EINVAL from the ioctl. Repeated registration of the same waitqueue is treated as a no-op. A rejected replacement leaves the CPU slot unregistered, consistent with the existing remove-before-register ordering. Single-waitqueue users such as the OpenHCL io_uring poll file keep their existing behavior. An LLM assisted the source audit, fix development, and validation of this issue. Fixes: 7bfe3b8ea6e3 ("Drivers: hv: Introduce mshv_vtl driver") Cc: stable@vger.kernel.org Signed-off-by: Daehyeon Ko <4ncienth@gmail.com> Reviewed-by: Naman Jain <namjain@linux.microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2026-10-21mshv_vtl: detach poll waiter on POLLFREEDaehyeon Ko
MSHV_SET_POLL_FILE keeps a poll wait entry after the ioctl returns. A file reference does not always pin the registered waitqueue: signalfd_poll() uses current->sighand->signalfd_wqh, whose lifetime is tied to the task. signalfd_cleanup() sends POLLFREE before the sighand is freed. The MSHV callback currently leaves its entry linked, so __wake_up_pollfree() warns and a later replacement calls remove_wait_queue() through a stale wqh pointer. A source-equivalent KASAN run reproduced: BUG: KASAN: slab-use-after-free in _raw_spin_lock_irqsave _raw_spin_lock_irqsave remove_wait_queue harness_ioctl [mshv_pollfree_harness] The object belonged to sighand_cache and had been released through slab_free_after_rcu_debug() after __cleanup_sighand(). On POLLFREE, unlink the entry under the provider waitqueue lock. Preserve the existing CPU cancellation before publishing a NULL wqh, since a NULL load lets a racing replacement reuse the persistent poll state. Use a matching acquire load under RCU when removing a normal registration. The callback takes no mutex and does not sleep, so the existing mutex-to-waitqueue-lock order is unchanged. An LLM assisted the source audit, fix development, and validation of this issue. Fixes: 7bfe3b8ea6e3 ("Drivers: hv: Introduce mshv_vtl driver") Cc: stable@vger.kernel.org Signed-off-by: Daehyeon Ko <4ncienth@gmail.com> Reviewed-by: Naman Jain <namjain@linux.microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2026-10-21Merge tag 'kbuild-7.4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux Pull Kbuild / Kconfig updates from Nathan Chancellor: "Kbuild: - Suppress compiler flags in debug info for external module builds - Use '-fmacro-prefix-map' in more places in the build - Merge initial set of changes from Lorenzo's speed up series, along with some fixes found through testing: - Avoid allocating .modinfo in vmlinux - Speed up kallsyms by indexing symbols by token and outputting binary data to disk directly then including in assembly via .incbin - Don't sort $(NM) output when unnecessary - Only emit relocations on the final vmlinx link - Reimplement mksysmap in C - Move many cc-option and ld-option calls into the Kconfig stage to cache their results - Use pigz for gzip compression when available - Move gen_init_cpio and gen_initramfs.sh from usr/ to scripts/ - Add a TOML configuration to scripts/container and update documentation accordingly - Add a generic, opt-in mechanism for checking that headers can compile standalone - Update machine function splitting argument for LLVM 24 rename in AutoFDO build - Miscellaneous minor clean ups, fixes, and hardening, mostly found/fixed via LLMs Kconfig: - Turn recursive ranges into an error - Fix savedefconfig for defaults that were adjusted for being out of range and revert a previously applied workaround - Improvements and hardening around integer and hexadecimal values - Emit a warning when selecting or implying a choice symbol, which has no effect - Emit a warning when KCONFIG_PROBABILITY is malformed - Introduce def_string / def_int / def_hex to mirror the existing def_bool / def_tristate to succinctly set a value and type at the same time. - Add cc-option-str and ld-option-str macros to act like Kbuild's cc-option and ld-option, returning the string when the option is supported, allowing many checks to be moved into Kconfig - Minor usability improvements to Kconfig tests" * tag 'kbuild-7.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: (59 commits) kbuild: AutoFDO: Update split machine function argument for upstream rename kbuild: Mark the initcall ordering recipe as recursive kbuild: Mark the gzip recipes as recursive localmodconfig: Explicitly report boolean configs during integrity check scripts/make_fit: Ignore schema checks when decomposing DTBs clang-tools: Import os for broken pipe handling kconfig: use the value argument in sym_get_near_range_bound() kconfig: fix infinite loop in conf_choice() when no choice value is visible kconfig: cleanup stale comment about 'keys' array kconfig: Improve ergonomics around disabling warnings with cc-option scripts/Kconfig.toolchain: Drop compiler symbols from dependencies checkkconfigsymbols.py: Parse Git status output line by line gen_init_cpio: stop parsing on lines with a missing argument list .gitignore: drop Module.markers .gitignore: ignore pacman package signatures kbuild: add header check facility as a manually run static analyzer Documentation: dev-tools: refer to user ID rather than id Documentation: dev-tools: update container.rst with config file scripts: add TOML config to container tool kconfig: tests: {old,save}defconfig: Forward dynamic keyword arguments ...
2026-10-21nvme-fabrics: clear the poll map if no poll queues are mappedDaniel Wagner
blk_mq_alloc_tag_set sets the nr_queues of every map to nr_hw_queues. When nr_poll_queues is set but no queues are left for polling, nvmf_map_queues skips the poll map and leaves it this way, with all CPUs mapped to hctx 0. The queue then claims poll support, polled I/O ends up on hctx 0, which isn't a poll queue, and hctx 0 is marked as a poll hctx, so even the Connect command of the first I/O queue is marked as polled. Clear the poll map when no poll queues are mapped, so polled I/O is rejected with -EOPNOTSUPP. Fixes: 1a9460cef571 ("nvme-tcp: support simple polling") Fixes: 5651cd3c4336 ("nvme-rdma: fix queue mapping when queue count is limited") Reviewed-by: Hannes Reinecke <hare@kernel.org> Tested-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Daniel Wagner <wagi@kernel.org> Signed-off-by: Keith Busch <kbusch@kernel.org>
2026-10-21nvme-fabrics: limit each queue type to the number of online CPUsDaniel Wagner
nvmf_nr_io_queues limits each queue type to the number of online CPUs when asking for I/O queues, but nvmf_set_io_queues hands out the granted queues without these limits, and only nr_io_queues is clamped when parsing the options. E.g. with 2 CPUs, nr_io_queues=2, nr_write_queues=10 and nr_poll_queues=10, 2 + 2 + 2 = 6 queues are requested, but handed out as 4 default, 2 read and 0 poll queues. blk_mq_map_queues can't create more CPU masks than there are CPUs, so default queues 2 and 3 take over the CPUs of default queues 0 and 1, and connecting the I/O queue of default queue 1 fails with -EXDEV. Apply the same limits in nvmf_set_io_queues. A queue type with more queues than online CPUs always has a hardware context without an online CPU, so no working setup changes. The options are not modified, so the limits follow CPU hotplug on reconnect. Fixes: 6486199378a5 ("nvme-tcp: fix queue mapping when queue count is limited") Fixes: a249d3066de6 ("nvme-fabrics: add queue setup helpers") Reviewed-by: Hannes Reinecke <hare@kernel.org> Tested-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Daniel Wagner <wagi@kernel.org> Signed-off-by: Keith Busch <kbusch@kernel.org>
2026-10-21nvme-fabrics: reset io_queues before computing the queue mappingDaniel Wagner
nvmf_set_io_queues only sets the io_queues entries of the queue types it hands out, but the array is reused on every reconnect. When the controller grants fewer queues on a reconnect, stale entries survive and nvmf_map_queues maps CPUs to hardware contexts that don't exist anymore, which crashes blk_mq_map_swqueue with a NULL pointer dereference. E.g. with nr_io_queues=8, nr_write_queues=8 and nr_poll_queues=8, 24 queues are mapped 8/8/8 (default/read/poll). If the controller grants only 16 queues on the reconnect, the poll map still starts at hardware context 16. Clear the array before computing the new mapping. Fixes: 6486199378a5 ("nvme-tcp: fix queue mapping when queue count is limited") Fixes: 5651cd3c4336 ("nvme-rdma: fix queue mapping when queue count is limited") Reviewed-by: Hannes Reinecke <hare@kernel.org> Tested-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Daniel Wagner <wagi@kernel.org> Signed-off-by: Keith Busch <kbusch@kernel.org>
2026-10-21nvme-tcp: initialize pf_cache_lock when allocating the controllerDaniel Wagner
Since commit 61b0ed3be81b ("nvme-tcp: parallelize I/O queue allocation and startup") the I/O tag set is allocated before the I/O queues. blk_mq_alloc_tag_set calls nvme_tcp_init_request for every request, which takes pf_cache_lock of the request's queue, but nvme_tcp_alloc_queue initializes that mutex only later. With CONFIG_DEBUG_MUTEXES the first connect triggers DEBUG_LOCKS_WARN_ON(lock->magic != lock) in __mutex_lock and lock debugging is disabled. Initialize pf_cache_lock for all queues when allocating the controller and keep it for the lifetime of the controller. Fixes: 61b0ed3be81b ("nvme-tcp: parallelize I/O queue allocation and startup") Reviewed-by: Hannes Reinecke <hare@kernel.org> Tested-by: Maurizio Lombardi <mlombard@redhat.com> Tested-by: Saravanan D <saravanand@crusoe.ai> Signed-off-by: Daniel Wagner <wagi@kernel.org> Signed-off-by: Keith Busch <kbusch@kernel.org>
2026-10-21nvmet: take subsys->lock while force-reconnecting in ↵Yu Zhang
nvmet_subsys_attr_qid_max_store() nvmet_subsys_attr_qid_max_store() sets subsys->max_qid and then walks subsys->ctrls to force every controller to reconnect, but it holds only nvmet_config_sem (for write). subsys->ctrls is protected by subsys->lock: nvmet_alloc_ctrl() adds an entry under subsys->lock, and nvmet_ctrl_free() removes it under subsys->lock with list_del() + kfree() (not kfree_rcu). The free path takes no nvmet_config_sem, so the two locks are independent. A controller teardown (host disconnect, keep-alive timeout or fatal error -> nvmet_sq_destroy() -> nvmet_ctrl_put() -> nvmet_ctrl_free()) can therefore list_del() an entry while qid_max_store() is iterating the list, corrupting the walk. KASAN, concurrent "echo 128 > .../subsystems/<nqn>/attr_qid_max" racing nvme-loop controllers connecting and disconnecting, panics in seconds: BUG: KASAN: null-ptr-deref in nvmet_subsys_attr_qid_max_store+0x10d/0x1b0 Read of size 8 at addr 0000000000000090 Call Trace: nvmet_subsys_attr_qid_max_store+0x10d/0x1b0 configfs_write_iter+0x1a7/0x250 vfs_write+0x5df/0x940 ksys_write+0xfd/0x1e0 (also seen as a general-protection fault dereferencing a LIST_POISON pointer at the same instruction.) Take subsys->lock around the list_for_each_entry() loop, matching every other subsys->ctrls accessor. ->delete_ctrl() only queues asynchronous controller teardown, so it does not re-enter subsys->lock under the loop. Fixes: 3e980f5995e0 ("nvmet: expose max queues to configfs") Cc: stable@vger.kernel.org Reviewed-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Yu Zhang <yuz08559@gmail.com> Tested-by: Yu Zhang <yuz08559@gmail.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2026-10-21Merge tag 'rust-7.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux Pull Rust updates from Miguel Ojeda: "Toolchain and infrastructure: - Update vendored 'zerocopy' crate to v0.8.62 (released 2026-10-08). This update advances 8 releases, with 3 of them carrying most of the changes. It contains new features as well as fixes. However, almost nothing has changed that requires updates on our side (a move of our non-ASCII change and the addition of an SPDX license identifier). - Generate Rust KUnit test suites for doctests reusing the '#[kunit_tests]' and '#[test]' attributes instead of C FFI functions, which allows to remove the generated C glue file. Relatedly, simplify 'kunit_assert!' by using 'file!()' and 'line!()' inside (which doctests override as needed), which allows to remove the 'file' helper and 'CONFIG_RUSTC_HAS_SPAN_FILE'. - Trim the function names in doctests generated by 'rustdoc' < 1.95.0 when building with 'O=', which were not reproducible. - Fix the 'VM_MAYSHARE' value in the generated bindings and its blocklist entry, due to typos. - Build 'core' with '--cfg no_io_statics' to ensure 'core' does not introduce any use of 'core::sync::atomic' into the kernel image since upstream Rust is moving 'std::io::Error' into 'core', which uses a global atomic pointer. Upstream Rust merged a PR to add a test checking that builds of 'core' are warning-free with that 'cfg' enabled. - Enable the unstable 'proc_macro_span' feature in 'proc-macro2', which provides 'Span::join' and thus improves the quality of the diagnostics of all our procedural macros, notably 'pin-init'. This is only used for producing diagnostics, thus there is no hard reliance on the feature. - Globally allow 'clippy::comparison_chain', since its suggestions are not always ideal and upstream downgraded it to 'pedantic' too. 'kernel' crate: - New 'mem' module: add the 'Align<N>' zero-sized type so that alignment can be specified via const generics ('repr(align(...))' only works with integer literals), e.g.: const N: usize = 128; struct S { _align: Align<N>, } assert_eq!(align_of::<S>(), N); - New 'ratelimit' module: add the 'Ratelimit' abstraction for 'struct ratelimit_state' and, based on it, the 'pr_*_ratelimited!' printing macros, which can be used for printing that may be triggered by userspace. In addition, convert Rust Binder to use them. - 'sync' module: to construct a global 'struct ratelimit_state', add a 'const' constructor for 'raw_spinlock_t'. In addition, move the lockdep types into a new 'sync::lockdep' submodule, since there were starting to be too many of them. - 'num' module: add the 'cv!' macro to create constant values ("cv") from an integer constant expression, with validity checked at compile time, inferring the target type from the context. It works for any type that implements the new 'FromConst' trait, e.g.: let a: Alignment = cv!(4096); let b: Bounded<u32, 4> = cv!(15); // Any integer constant expression works, not only literals. let m: NonZero<usize> = cv!(usize::MAX); // Checked narrowing, including in `const` items. const SMALL: u8 = cv!(200u32); // The target type can be given explicitly. let e = cv!(200u32 => u8); // With an explicit primitive target, the expression can use // generic parameters. const fn as_u64<const KEY: u16>() -> u64 { cv!(KEY => u64) } This avoids the verbose turbofish syntax which disincentivized using these types at interface boundaries (e.g. 'Alignment::new::<8>()'). - 'alloc' module: - Allow different error types in 'KBox::pin_slice()', enabling use of infallible initializers. - Add 'NumaNode::id()' accessor to retrieve the underlying NUMA node identifier. - 'time' module: - Add 'Delta::to_jiffies_timeout()' for use in timeout arguments. - Add 'Delta::as_jiffies_unsigned()'. - Make 'Delta::ZERO' generic over the time unit. - Warn and assert when passing out-of-range inputs to 'fsleep' and 'udelay'. - Rename 'ClockSource' to 'ClockId' to better align with naming conventions in C kernel. - Make 'CONFIG_HZ' value available as 'bindings::HZ'. - Add implementation detail documentation for 'HrTimer'. - 'bitmap' module: - Add contiguous area operations ('next_zero_area{,_off}', 'set' and 'clear'), with extra checks compared to the underlying C code, plus additional ones under 'CONFIG_RUST_BITMAP_HARDENED'. It includes tests demonstrating the edge cases. - Restrict bitmap length to at most 'i32::MAX', matching 'BitmapVec::MAX_LEN' and simplifying a few things. This also fixes 'u32' casts truncating in 'copy_and_extend', which could otherwise lead to OOB writes. - 'bug' module: - Fix 'warn_on!' on UML which called 'warn_slowpath_fmt()' with the wrong arguments; and fix its '// SAFETY:' comment too. - Add a KUnit test for 'warn_on!'. - 'id_pool' module: add contiguous ID reservation via the new 'reserve_ids' and 'release_ids' methods, built on top of the new bitmap area operations. - 'sizes' module: add the sub-1K size constants ('SZ_1' to 'SZ_512') and implement 'SizeConstants' for 'Alignment', so that one can write e.g. 'Alignment::SZ_8'. 'macros' crate: - Add '#[optional]' attribute for optional methods in '#[vtable]' to replace the 'build_error!(VTABLE_DEFAULT_ERROR)' boilerplate, e.g.: #[vtable] pub trait Operations: Sized { #[optional] fn f(&self) -> Result; } In addition, apply it to miscdevice and hide generated 'HAS_' constants for required methods. - Allow non-ASCII characters in the 'authors' field of the 'module!' macro, which was unintentionally restricted when multiple authors support was introduced. 'pin-init' crate: [ Extra context from Gary's pull request: "This is a cycle packed with feature updates. Two of the most anticipated features, tuple struct support and safe self reference creation, has been included in this pull request. Safe self reference is a big one and is pushed a bit late in the cycle. The initial plan was to include a minimum subset for this cycle because I was worried about potential soundness issues; however during Plumbers it was agreed that the features should be upstreamed at once. This is because the initial users (Nova, JobQueue) would all need the advanced features, so it is better to ensure that the feature get put into use for real, and it can iterate with users, rather than being fully designed on paper. The existing safety checks are already very comprehensive, and Benno and I are confident that if new ones are discovered, it wouldn't affect the overall design. That said, the the usage of the advanced features (invariance, existential lifetime) shall be limited to the pre-agreed users only, so even in case where the feature needs to be reworked, the blast radius is limited. Another theme in this cycle is to improve the developer experience when things are used wrongly. A lot of work has been done to use proper spans from user-provided tokens so error message point to things that cause them. Many common misuse scenarios also gain additional custom diagnostics." ] - User visible changes: - Support tuple structs. - Allow safe creation of self references. - Vastly improve diagnostics for common misuse scenarios. - Other changes: - Use 'mixed_site' hygiene consistently. 'MAINTAINERS': - Add 'RUST [BUG]' entry for the Rust 'bug' module (i.e. 'warn_on!'), which will be maintained by FUJITA Tomonori -- thank you! - Add Alice Ryhl as co-maintainer for 'Rust [ALLOC]'. And some other fixes, cleanups and improvements. * tag 'rust-7.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (91 commits) rust: zerocopy: update to v0.8.62 rust: zerocopy: fix link to upstream `README.md` rust: id_pool: add contiguous ID reservation rust: bitmap: add contiguous area operations rust: sizes: implement SizeConstants for Alignment rust: sizes: add sub-1K size constants rust: bitmap: restrict bitmap length to at most i32::MAX rust: bitmap: use function-level cfg on kunit test rust: num: add cv! macro to create values from constant expressions rust: bug: update the SAFETY comment for warn_slowpath_fmt() on UML rust: time: add Delta::as_jiffies_unsigned() rust: time: make Delta::ZERO generic over the time unit rust_binder: use pr_*_ratelimited! for printing rust: add pr_*_ratelimited! macros for printing rust: sync: add const constructor for raw_spinlock_t rust: sync: move lockdep types to rust/kernel/sync/lockdep.rs rust: pin-init: internal: suppress `explicit_outlives_requirements` MAINTAINERS: add entry for the Rust `bug` module rust: pin-init: internal: pin_data: support existential lifetimes rust: pin-init: internal: pin_data: support shared projection ...
2026-10-21Merge tag 'rcu.2026.10.12b' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux Pull RCU updates from Paul McKenney: "Execution contexts and call_rcu() and call_srcu(): - Make call_rcu() and call_srcu invocable from NMI handlers and while holding scheduler locks (using irq-work handlers) - Add rcutorture and BPF tests calling these functions from these contexts - Disable rcutorture overload testing for RCU readers that are "fragile", that is, that do not either disable preemption or have some form of RCU priority boosting SRCU updates: - Add an atomic SRCU where readers run with preemption disabled and grace periods can be invoked from atomic contexts. David Woodhouse has a patch series exploiting this for GPC - Add torture and lockdep tests for atomic SRCU - Add numerous optimizations for atomic SRCU based on the fact that it does not have callbacks, for example, eliminating any transition to "big" srcu_struct structures even on systems that configure these to happen at initialization time Additional torture-test updates: - Fix a divide-by-zero bug in forward-progress testing - Synchronously wait for all IRQ-queued callbacks to complete - Allow alternative "ssh" commands to be specified for use by kvm-remote.sh - Fix kvm-again.sh re-run failure on PowerPC - Add additional lockdep testing for atomic SRCU - Fix error double-counting in srcu_lockdep.sh - Add atomic SRCU cross-CPU IRQ context mismatch testing, with the - trick being that the atomic SRCU readers context must be at least as strict as that of the atomic SRCU grace-period wait. So for example, if the readers have IRQs disabled, so must the grace-period wait Miscellaneous updates: - Update stallwarn.rst documentation for the re-implementation of RCU Tasks Trace in terms of SRCU - Fix the lazy-callback shrink scanner budget computation so that it honors the reclaim budget - Avoid panicking on RCU CPU stalls that end before the warning can be printed - Add "running" and "boosted" indications to the RCU task stall warning output - People have been (incorrectly) relying on rcu_barrier() to wait for kfree_rcu() callbacks and processing. But it turns out to be easier to fix rcu_barrier() to meet their expectations than to fix their code to live within the earlier rcu_barrier() specification. So rcu_barrier() now waits on kfree_rcu() callbacks and processing - Disable RCU Tasks console output that track when this RCU flavor switches between per-CPU and global callback queuing. New use cases appeared that generated enough console traffic to cause trouble, and no one seemed to care about these messages. For those needing those messages, there is a new rcupdate.rcu_task_collapse_debug kernel boot parameter - Fix __rcu pointer attribute handling to eliminate false positives - Fix typos and drop redundant #include directives" * tag 'rcu.2026.10.12b' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (46 commits) rcutorture: Add atomic SRCU cross-CPU IRQ context mismatch test selftests/rcutorture: Fix double nerrs count in srcu_lockdep.sh selftests/rcutorture: Wire atomic SRCU into srcu_lockdep.sh rcutorture: Add atomic SRCU lockdep support rcutorture: Fix kvm-again.sh re-run failure on ppc64 torture: Allow specifying alternative ssh command to kvm-remote.sh rcutorture: Synchronously wait for all rcu_torture_irq() callbacks to complete rcutorture: Fix divide-by-zero with fwd_progress_div=1 srcutree: Preserve IRQ state in synchronize_srcu_atomic() callchain srcutiny: Add lockdep and early-boot checks to synchronize_srcu_atomic() srcutree: Add lockdep and early-boot checks to synchronize_srcu_atomic() srcutree: Skip torture to-big transition for atomic SRCU srcutree: Don't transition atomic SRCU to big in srcu_gp_end() srcutree: Make init_srcu_struct_atomic() prevent transition to big srcu: Restrict atomic-SRCU non_block annotation to task context srcutree: Remove srcu_barrier() sleep for atomic SRCU srcutree: Skip callback scheduling for atomic SRCU grace periods srcutree: Add reader-free fastpath to synchronize_srcu_atomic() rcutorture: Add atomic-SRCU support to torture.sh srcutree: Explicitly note DEFINE_SRCU() needs for srcu_barrier() ...
2026-10-21Merge branch 'for-7.4/amd_sfh' into for-linusJiri Kosina
- support for newer AMD SoCs (Basavaraj Natikar) - sysfs attributes of operating-mode telemetry (Basavaraj Natikar)
2026-10-21Merge branch 'for-7.4/apple' into for-linusJiri Kosina
- power management fix for Apple Touch Bar (Andre Eikmeyer) - fix for trackpad hanling on T2 Macs (Aditya Garg)
2026-10-21Merge branch 'for-7.4/asus' into for-linusJiri Kosina
- SG Mobile LED support (Denis Benato) - power management fix for ROG Ally (Deni Benato) - asus_work() hardening (Denis Benato) - fix for invalid keyboard feature reports being sent on ASUS laptops with I2C/HID touchpads (Panz Dev)
2026-10-21Merge tag 'bitmap-for-v7.4-rc1' of https://github.com/norov/linuxLinus Torvalds
Pull bitmap updates from Yury Norov: "This includes __MAKE_OP() macro removal from me with the follow-up from Mark, cleanups for bitmaps parser from Shashank and a couple Rust docs fixes from Georgios" * tag 'bitmap-for-v7.4-rc1' of https://github.com/norov/linux: rust: bitmap: document panics in `next_bit` and `next_zero_bit` rust: id_pool: document panics in `find_unused_id` and `release_id` bitmap: test bitmap_parselist() with a group size close to UINT_MAX bitmap: bitmap_parselist(): don't wrap around on a huge group size bitmap: test bitmap_parselist() with text after the group size bitmap: bitmap_parselist(): reject trailing characters after group size bitmap: test bitmap_parse() with an illegal character before 8 hex digits bitmap: bitmap_parse(): reject non-hex character before 8 digits bitfield: Restore be16_replace_bits() bitfield: get rid of __MAKE_OP machinery
2026-10-21Merge branch 'for-7.4/core' into for-linusJiri Kosina
- OOB fix in s32ton() (Alan Stern) - switch to named initializers for acpi_device_id (Pawel Zalewski) - UAF fix in hiddev (Yousef Alhouseen)
2026-10-21Merge branch 'for-7.4/i2c-hid' into for-linusJiri Kosina
- power management fix for i2c-hid, removing bus timeout from every reboot (Justin Yeh)
2026-10-21Merge branch 'for-7.4/intel-thc-hid' into for-linusJiri Kosina
- conversion of intel-thc-hid to hid_safe_input_report() (Even Xu)
2026-10-21Merge branch 'for-7.4/lenovo' into for-linusJiri Kosina
- various functionality fixes and code cleanups of lenovo-go-s driver (Derek J. Clark)
2026-10-21Merge branch 'for-7.4/nintendo' into for-linusJiri Kosina
- support for Switch 2 controller (Vicki Pfau) - support for PDP Afterglow controller (Aiman Najjar)
2026-10-21Merge branch 'for-7.4/pulsar' into for-linusJiri Kosina
2026-10-21Merge branch 'for-7.4/roccat' into for-linusJiri Kosina
- fixed handling of short reports (Jiale Yao)
2026-10-21Merge branch 'for-7.4/wacom' into for-linusJiri Kosina
- UAF fixes (Lee Jones) - SW_MUTE_DEVICE semantics fix (Lee Jones, Ping Cheng)
2026-10-21Merge branch 'for-7.4/wiimote' into for-linusJiri Kosina
- switch to scoped_guard (Rafael Passos) - LED-indicated controller ID support (Rafael Passos)
2026-10-21perf cs-etm: Respect --no-itrace optionJames Clark
If there is a bug in decoding then Perf will exit early and you can't investigate by using the raw dump mode. Make the --no-itrace option stop Coresight decoding after printing the aux header so decode errors don't stop the rest of the samples being printed. pmu_type and evsel_is_auxtrace need to be set so that the unleader_auxtrace() behavior is the same as without --no-itrace. Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Leo Yan <leo.yan@arm.com> Signed-off-by: James Clark <james.clark@linaro.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-10-21perf cs-etm: Synthesize missing HW_ID mappings for raw traceLeo Yan
The CoreSight driver emits PERF_RECORD_AUX_OUTPUT_HW_ID via perf_report_aux_output_id(). If the perf ring buffer is full, perf_report_aux_output_id() can fail to emit the record and return silently. When at least one HW_ID record is present in the file, perf skips the legacy metadata-only trace ID mapping path. Therefore any raw AUX queue whose HW_ID record was dropped can be left with an empty traceid_list, and cs_etm__create_queue_decoders() will not create a decoder for that queue. Fix it by ignoring all HW_IDs for unformatted queues and always create one decoder per queue unconditionally. Trace ID is unused so we can hard code it to 1 (0 is a special value used in 'pending_timestamp_chan_id' to indicate not pending). We also need put the same trace ID in the CPU metadata because the relationship between CPU metadata and traceid_list is bidirectional. Moving cs_etm__metadata_set_trace_id() into the mapping function solves this and simplifies existing code. cs_etm__insert_trace_id_node() now does two things, so rename it to a more generic cs_etm__map_trace_id(). Signed-off-by: Leo Yan <leo.yan@arm.com> Signed-off-by: James Clark <james.clark@linaro.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-10-21perf cs-etm: Free partially created queuesJames Clark
cs_etm__create_decoders() can fail half way through and the err_free_queues label won't free them. Call the full queue free function here instead. If no decoders were created it's a nop. Reviewed-by: Leo Yan <leo.yan@arm.com> Signed-off-by: James Clark <james.clark@linaro.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-10-21perf cs-etm: Don't add global v0 HW_IDs to unformatted queuesJames Clark
In the case of mixed formatted and unformatted trace with v0 HW_IDs, or no HW_IDs at all resulting in the cs_etm__map_trace_ids_metadata() fallback, formatted queues will write their HW_IDs to unformatted queues. This will result in an assert because of multiple decoders on an unformatted queue. Fix it by not inserting trace ID nodes on other unformatted queues. This isn't an issue for v0.1 HW_IDs because they aren't global so will only add to their own queue. Fixes: 19c3e4db38c5bf30 ("perf: cs-etm: Create decoders based on the trace ID mappings") Reviewed-by: Leo Yan <leo.yan@arm.com> Signed-off-by: James Clark <james.clark@linaro.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-10-21perf c2c: Fix memory leaks on output fieldsNamhyung Kim
The perf_hpp_list was not freed after use. Let's add it for the main c2c hists list in perf c2c report and a local list in print_pareto(). Previously it was detected by ASAN like below. ================================================================= ==42183==ERROR: LeakSanitizer: detected memory leaks Indirect leak of 1064 byte(s) in 7 object(s) allocated from: #0 0x7f17334ef24f in calloc (/lib64/libasan.so.8+0xef24f) (BuildId: 61e8165ca90f7a4f06b73f064a938c76deaae079) #1 0x0000005fa099 in zalloc ../../lib/zalloc.c:8 #2 0x0000004faf6d in get_format tools/perf/builtin-c2c.c:1978 #3 0x0000004fb45e in c2c_hists__init_output tools/perf/builtin-c2c.c:2004 #4 0x0000004fb7de in __hpp_list__parse tools/perf/builtin-c2c.c:2047 #5 0x0000004fbae9 in hpp_list__parse tools/perf/builtin-c2c.c:2085 #6 0x0000004fee13 in print_pareto tools/perf/builtin-c2c.c:2563 #7 0x0000004ffcd7 in perf_c2c__hists_fprintf tools/perf/builtin-c2c.c:2708 #8 0x000000500ab5 in perf_c2c_display tools/perf/builtin-c2c.c:2949 #9 0x0000005045c3 in perf_c2c__report tools/perf/builtin-c2c.c:3522 #10 0x000000505caa in cmd_c2c tools/perf/builtin-c2c.c:3676 #11 0x0000005df50e in run_builtin tools/perf/perf.c:383 #12 0x0000005df9b1 in handle_internal_command tools/perf/perf.c:436 #13 0x0000005dfd7f in run_argv tools/perf/perf.c:480 #14 0x0000005e02d6 in main tools/perf/perf.c:581 #15 0x7f1729450680 in __libc_start_call_main (/lib64/libc.so.6+0x3680) (BuildId: 85075e2ae2e13352a1413d41c327dacf6461526c) #16 0x7f1729450797 in __libc_start_main@GLIBC_2.2.5 (/lib64/libc.so.6+0x3797) (BuildId: 85075e2ae2e13352a1413d41c327dacf6461526c) #17 0x000000409c34 in _start (tools/perf/perf+0x409c34) (BuildId: 36a64600776d92e4ab7dfd5ca20c92280d72a645) SUMMARY: AddressSanitizer: 1064 byte(s) leaked in 7 allocation(s). Fixes: c75540e3160fb586 ("perf c2c report: Add dimension support") Reviewed-by: Aaron Tomlin <atomlin@atomlin.com> Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com> Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-10-21sched/core: Avoid requeueing a singleton balance callbackAndrea Righi
With proxy execution, __schedule() can call set_next_task_scx() with SNT_REPICK and then SNT_PICK for the same donor. Both calls queue the kick_sync balance callback while kick_sync_pending remains set. When the callback is the only list entry, its next pointer is NULL, so the existing duplicate check misses it. Queueing it again links it to itself and causes the wait to run twice. Also check whether the callback is already the head of the list to reject the second insertion. This covers the kick_sync callback because nothing else is queued between SNT_REPICK and SNT_PICK. Requeueing the tail of a longer list remains possible and is outside the scope of this fix. Fixes: e2859566ffbc ("sched_ext: Queue the kick_sync wait from set_next_task_scx()") Reported-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/08cac02c604dd73ef96fc92eb29d692b@kernel.org Signed-off-by: Andrea Righi <arighi@nvidia.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2026-10-21Merge commit '211cda4fdf33011cee39f8970c4625b207142d6b' of ↵Anna Schumaker
git://git.linux-nfs.org/projects/trondmy/linux-nfs.git into anna/linux-next This pulls in NFS client bugfixes from the Linux 7.3-rc cycle that were never sent upstream. Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
2026-10-21Merge branch 'pci/misc'Bjorn Helgaas
- Skip Target Speed quirk on clamped ports with no link (Maciej W. Rozycki) - Disable MSI for ULi M1575 EHCI controller (Imre Kaloz) - Fix out-of-bounds MMIO read in nvme_disable_and_flr() quirk (Mohamad Raizudeen) * pci/misc: PCI: Fix out-of-bounds MMIO read in nvme_disable_and_flr() PCI: Disable MSI for ULi M1575 EHCI controller PCI: Skip Target Speed quirk on clamped ports with no link
2026-10-21Merge branch 'pci/controller/xilinx-dma-pl'Bjorn Helgaas
- Fix device node reference leak in xilinx_pl_dma_pcie_init_irq_domain() (Wentao Liang) * pci/controller/xilinx-dma-pl: PCI: xilinx-xdma: Fix device node reference leak in xilinx_pl_dma_pcie_init_irq_domain()