| Age | Commit message (Collapse) | Author |
|---|
|
Clean up the async_depth documentation:
- insert blank lines before and after lists where needed
- convert verb tense in a few places
- make lines fit within 80 characters
Documentation/ABI/stable/sysfs-block:612: ERROR: Unexpected indentation. [docutils]
Documentation/ABI/stable/sysfs-block:612: ERROR: Unexpected indentation. [docutils]
Documentation/ABI/stable/sysfs-block:612: ERROR: Unexpected indentation. [docutils]
Fixes: 2c04718edcd5 ("blk-mq: add documentation for new queue attribute async_dpeth")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Merge updates of drivers handling devices defined in the ACPI
specification and other generic devices with ACPI interfaces for
6.20-rc1/7.0-rc1:
- Add a piece of documentation explaining why binding drivers directly
to ACPI device objects is not a good idea in general and why it is
desirable to convert drivers doing so into proper platform drivers
that use struct platform_driver for device binding (Rafael Wysocki)
- Convert multiple "core ACPI" drivers, including the NFIT ACPI device
driver, the generic ACPI button drivers, the generic ACPI thermal
zone driver, the ACPI hardware event device (HED) driver, the ACPI EC
driver, the ACPI SMBUS HC driver, the ACPI Smart Battery Subsystem
(SBS) driver, and the ACPI backlight (video) driver to proper platform
drivers that use struct platform_driver for device binding (Rafael
Wysocki)
- Use acpi_get_local_u64_address() in the ACPI backlight (video) driver
to evaluate _ADR instead of evaluating that object directly (Andy
Shevchenko)
* acpi-driver: (25 commits)
ACPI: video: simplify code with acpi_get_local_u64_address()
ACPI: scan: Clean up after recent changes
ACPI: scan: Use acpi_setup_gpe_for_wake() for buttons
ACPI: PM: Let acpi_dev_pm_attach() skip devices without ACPI PM
ACPI: Documentation: driver-api: Disapprove of using ACPI drivers
ACPI: video: Convert the driver to a platform one
ACPI: video: Adjust event notification routine
ACPI: scan: Register platform devices for backlight device objects
ACPI: SBS: Convert the driver to a platform one
ACPI: SMBUS HC: Convert the driver to a platform one
ACPI: EC: Convert the driver to a platform one
ACPI: EC: Register a platform device for ECDT EC
ACPI: HED: Convert the driver to a platform one
ACPI: thermal: Rework system suspend and resume handling
ACPI: thermal: Convert the driver to a platform one
ACPI: thermal: Adjust event notification routine
ACPI: scan: Register platform devices for thermal zones
ACPI: scan: Do not mark button ACPI devices as wakeup-capable
ACPI: scan: Do not bind ACPI drivers to fixed event buttons
ACPI: tiny-power-button: Convert the driver to a platform one
...
|
|
Restrict D3Cold disablement for BMG to unsupported NUC platforms,
instead of disabling it on all platforms.
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Fixes: 3e331a6715ee ("drm/xe/pm: Temporarily disable D3Cold on BMG")
Link: https://patch.msgid.link/20260123173238.1642383-1-karthik.poosa@intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 39125eaf8863ab09d70c4b493f58639b08d5a897)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Correct the function name in the kerneldoc.
It is for below warning:
"Warning: drivers/gpu/drm/xe/xe_tlb_inval_job.c:210 expecting prototype for
xe_tlb_inval_alloc_dep(). Prototype was for xe_tlb_inval_job_alloc_dep()
instead"
Fixes: 15366239e2130 ("drm/xe: Decouple TLB invalidations from GT")
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20260129233834.419977-8-shuicheng.lin@intel.com
(cherry picked from commit 9f9c117ac566cb567dd56cc5b7564c45653f7a2a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Correct the function name in the kerneldoc.
It is for below warning:
"Warning: drivers/gpu/drm/xe/xe_tlb_inval.c:136 expecting prototype for
xe_gt_tlb_inval_init(). Prototype was for xe_gt_tlb_inval_init_early()
instead"
v2: add () for the function. (Michal)
Fixes: db16f9d90c1d9 ("drm/xe: Split TLB invalidation code in frontend and backend")
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20260129233834.419977-7-shuicheng.lin@intel.com
(cherry picked from commit 0651dbb9d6a72e99569576fbec4681fd8160d161)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Correct the function name in the kerneldoc.
It is for below warning:
"Warning: drivers/gpu/drm/xe/xe_migrate.c:1262 expecting prototype for
xe_get_migrate_exec_queue(). Prototype was for xe_migrate_exec_queue()
instead"
Fixes: 916ee4704a865 ("drm/xe/vf: Register CCS read/write contexts with Guc")
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20260129233834.419977-6-shuicheng.lin@intel.com
(cherry picked from commit 9fd8da717934f05125b9ba6782622c459a368dc0)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The topology query helper advanced the user pointer by the size
of the pointer, not the size of the structure. This can misalign
the output blob and corrupt the following mask. Fix the increment
to use sizeof(*topo).
There is no issue currently, as sizeof(*topo) happens to be equal
to sizeof(topo) on 64-bit systems (both evaluate to 8 bytes).
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260130043907.465128-2-shuicheng.lin@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit c2a6859138e7f73ad904be17dd7d1da6cc7f06b3)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The GuC scheduler ABI header contains a file-level comment that is not
intended to document a kernel-doc symbol. Using kernel-doc comment
syntax (/** */) triggers kernel-doc warnings.
With "-Werror", this causes the build to fail. Convert the comment to a
regular block comment.
HDRTEST drivers/gpu/drm/xe/abi/guc_scheduler_abi.h
Warning: drivers/gpu/drm/xe/abi/guc_scheduler_abi.h:11 This comment starts with '/**', but isn't a kernel-doc comment. Refer to Documentation/doc-guide/kernel-doc.rst
* Generic defines required for registration with and submissions to the GuC
1 warnings as errors
make[6]: *** [drivers/gpu/drm/xe/Makefile:377: drivers/gpu/drm/xe/abi/guc_scheduler_abi.hdrtest] Error 3
make[5]: *** [scripts/Makefile.build:544: drivers/gpu/drm/xe] Error 2
make[4]: *** [scripts/Makefile.build:544: drivers/gpu/drm] Error 2
make[3]: *** [scripts/Makefile.build:544: drivers/gpu] Error 2
make[2]: *** [scripts/Makefile.build:544: drivers] Error 2
make[1]: *** [/home/kbuild2/kernel/Makefile:2088: .] Error 2
make: *** [Makefile:248: __sub-make] Error 2
v2:
- Add Fixes tag (Daniele)
Fixes: b0c5cf4f5917 ("drm/gt/guc: extract scheduler-related defines from guc_fwif.h")
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20260130135210.2659200-1-chaitanya.kumar.borah@intel.com
(cherry picked from commit f89dbe14a0c8854b7aaf960dd842c10698b3ff19)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
xe_guc_print_info is void-returning, but the function pointer it is
assigned to expects an int-returning function, leading to the following
CFI error:
[ 206.873690] CFI failure at guc_debugfs_show+0xa1/0xf0 [xe]
(target: xe_guc_print_info+0x0/0x370 [xe]; expected type: 0xbe3bc66a)
Fix this by updating xe_guc_print_info to return an integer.
Fixes: e15826bb3c2c ("drm/xe/guc: Refactor GuC debugfs initialization")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: George D Sworo <george.d.sworo@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20260129182547.32899-2-daniele.ceraolospurio@intel.com
(cherry picked from commit dd8ea2f2ab71b98887fdc426b0651dbb1d1ea760)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
When ECAM is enabled, the driver skipped calling dw_pcie_iatu_setup()
before configuring ECAM iATU entries. This left IO and MEM outbound
windows unprogrammed, resulting in broken IO transactions. Additionally,
dw_pcie_config_ecam_iatu() was only called during host initialization,
so ECAM-related iATU entries were not restored after suspend/resume,
leading to failures in configuration space access
To resolve these issues, move the ECAM iATU configuration to
dw_pcie_iatu_setup(), and invoke dw_pcie_iatu_setup() when ECAM is
enabled.
Furthermore, add error checks in dw_pcie_prog_outbound_atu() and
dw_pcie_prog_inbound_atu() such that an error is returned if the caller is
trying to program an iATU that is outside the number of iATUs supported by
the controller.
Fixes: f6fd357f7afb ("PCI: dwc: Prepare the driver for enabling ECAM mechanism using iATU 'CFG Shift Feature'")
Reported-by: Maciej W. Rozycki <macro@orcam.me.uk>
Closes: https://lore.kernel.org/all/alpine.DEB.2.21.2511280256260.36486@angie.orcam.me.uk/
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Co-developed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
[mani: used imperative tone]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hans Zhang <zhanghuabing@ecosda.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: stable+noautosel@kernel.org # depends on Clean up iATU index usage in dw_pcie_iatu_setup()
Link: https://patch.msgid.link/20260127151038.1484881-8-cassel@kernel.org
|
|
The current iATU index usage in dw_pcie_iatu_setup() is a mess.
For outbound address translation the index is incremented before usage.
For inbound address translation the index is incremented after usage.
Incrementing the index after usage make much more sense, and make the
index usage consistent for both outbound and inbound address translation.
Most likely, the overly complicated logic for the outbound address
translation is because the iATU at index 0 is reserved for CFG IOs
(dw_pcie_other_conf_map_bus()), however, we should be able to use the
exact same logic for the indexing of the outbound and inbound iATUs.
(Only the starting index should be different.)
Create two new variables ob_iatu_index and ib_iatu_index, which makes
it more clear from the name itself that it is a zeroes based index,
and only increment the index if the iATU configuration call succeeded.
Since we always check if there is an index available immediately before
programming the iATU, we can remove the useless "ranges exceed outbound
iATU size" warnings, as the code is already unreachable. For the same
reason, we can also remove the useless breaks outside of the while loops.
No functional changes intended.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hans Zhang <zhanghuabing@ecosda.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260127151038.1484881-7-cassel@kernel.org
|
|
When dw_pcie_iatu_setup() configures outbound address translation for both
type PCIE_ATU_TYPE_MEM and PCIE_ATU_TYPE_IO, the iATU index to use is
incremented before calling dw_pcie_prog_outbound_atu().
However for msg_atu_index, the index is not incremented before use,
causing the iATU index to be the same as the last configured iATU index,
which means that it will incorrectly use the same iATU index that is
already in use, breaking outbound address translation.
In total there are three problems with this code:
-It assigns msg_atu_index the same index that was used for the last
outbound address translation window, rather than incrementing the index
before assignment.
-The index should only be incremented (and msg_atu_index assigned) if the
use_atu_msg feature is actually requested/in use (pp->use_atu_msg is set).
-If the use_atu_msg feature is requested/in use, and there are no outbound
iATUs available, the code should return an error, as otherwise when this
this feature is used, it will use an iATU index that is out of bounds.
Fixes: e1a4ec1a9520 ("PCI: dwc: Add generic MSG TLP support for sending PME_Turn_Off when system suspend")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hans Zhang <zhanghuabing@ecosda.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260127151038.1484881-6-cassel@kernel.org
|
|
If siw_get_hdr() returns -EINVAL before set_rx_fpdu_context(),
qp->rx_fpdu can be NULL. The error path in siw_tcp_rx_data()
dereferences qp->rx_fpdu->more_ddp_segs without checking, which
may lead to a NULL pointer deref. Only check more_ddp_segs when
rx_fpdu is present.
KASAN splat:
[ 101.384271] KASAN: null-ptr-deref in range [0x00000000000000c0-0x00000000000000c7]
[ 101.385869] RIP: 0010:siw_tcp_rx_data+0x13ad/0x1e50
Fixes: 8b6a361b8c48 ("rdma/siw: receive path")
Signed-off-by: YunJe Shin <ioerts@kookmin.ac.kr>
Link: https://patch.msgid.link/20260204092546.489842-1-ioerts@kookmin.ac.kr
Acked-by: Bernard Metzler <bernard.metzler@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
ib_umad_write computes data_len from user-controlled count and the
MAD header sizes. With a mismatched user MAD header size and RMPP
header length, data_len can become negative and reach ib_create_send_mad().
This can make the padding calculation exceed the segment size and trigger
an out-of-bounds memset in alloc_send_rmpp_list().
Add an explicit check to reject negative data_len before creating the
send buffer.
KASAN splat:
[ 211.363464] BUG: KASAN: slab-out-of-bounds in ib_create_send_mad+0xa01/0x11b0
[ 211.364077] Write of size 220 at addr ffff88800c3fa1f8 by task spray_thread/102
[ 211.365867] ib_create_send_mad+0xa01/0x11b0
[ 211.365887] ib_umad_write+0x853/0x1c80
Fixes: 2be8e3ee8efd ("IB/umad: Add P_Key index support")
Signed-off-by: YunJe Shin <ioerts@kookmin.ac.kr>
Link: https://patch.msgid.link/20260203100628.1215408-1-ioerts@kookmin.ac.kr
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Merge ACPI support updates related to _OSC evaluation, the handling of
"system resource" device objects, and ACPI-based device enumeration
for 6.20-rc1/7.0-rc1:
- Fix handling of _OSC errors in acpi_run_osc() to avoid failures on
systems where _OSC error bits are set even though the _OSC return
buffer contains acknowledged feature bits (Rafael Wysocki)
- Clean up and rearrange \_SB._OSC handling for general platform
features and USB4 features to avoid code duplication and unnecessary
memory management overhead (Rafael Wysocki)
- Make the ACPI core device enumeration code handle PNP0C01 and PNP0C02
("system resource") device objects directly instead of letting the
legacy PNP system driver handle them to avoid device enumeration
issues on systems where PNP0C02 is present in the _CID list under
ACPI device objects with a _HID matching a proper device driver in
Linux (Rafael Wysocki)
- Drop workarounds for the known device enumeration issues related to
_CID lists containing PNP0C02 (Rafael Wysocki)
- Drop outdated comment regarding removed function in the ACPI-based
device enumeration code (Julia Lawall)
- Make PRP0001 device matching work as expected for ACPI device objects
using it as a _HID for board development and similar purposes (Kartik
Rajput)
- Use async schedule function in acpi_scan_clear_dep_fn() to avoid
races with user space initialization on some systems (Yicong Yang)
* acpi-bus:
ACPI: scan: Use async schedule function in acpi_scan_clear_dep_fn()
ACPI: bus: Align acpi_device_get_match_data() with driver match order
ACPI: scan: Drop outdated comment regarding removed function
ACPI: scan: Use resource_type() for resource type checking
ACPI: bus: Fix typo under sizeof() in acpi_run_osc()
ACPI: bus: Adjust acpi_osc_handshake() parameter list
ACPI: bus: Rework the handling of \_SB._OSC USB4 features
ACPI: bus: Adjust feature mask creation for \_SB._OSC
ACPI: bus: Rework the handling of \_SB._OSC platform features
ACPI: bus: Rename label and use ACPI_FREE() in acpi_run_osc()
ACPI: bus: Split _OSC error processing out of acpi_run_osc()
ACPI: bus: Split _OSC evaluation out of acpi_run_osc()
ACPI: bus: Rework printing debug messages on _OSC errors
ACPI: bus: Fix handling of _OSC errors in acpi_run_osc()
ACPI: PNP: Drop acpi_nonpnp_device_ids[]
platform/x86/intel/vbtn: Stop creating a platform device
platform/x86/intel/hid: Stop creating a platform device
ACPI: PNP: Drop PNP0C01 and PNP0C02 from acpi_pnp_device_ids[]
|
|
The tape device driver only supports 3490E devices on Virtual Tape Server
(VTS). There is no point in keeping separated options and modules for
different device types and general hardware support. Consolidate the tape
config option into a single option, which enables the complete tape support
with one singular module called 'tape_s390'. The corresponding module entry
points are adapted and consolidate in tape_init() and tape_exit()
respectively in tape_core.c
The current module author and descriptions of the individual tape
modules are outdated and haven't been changed for quite some time.
Change it to a more generic description that is in line with the
corresponding supported s390 architecture for the single tape module.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
`css_alloc_subchannel()` calls `device_initialize()` before setting up
the DMA masks. If `dma_set_coherent_mask()` or `dma_set_mask()` fails,
the error path frees the subchannel structure directly, bypassing
the device model reference counting.
Once `device_initialize()` has been called, the embedded struct device
must be released via `put_device()`, allowing the release callback to
free the container structure.
Fix the error path by dropping the initial device reference with
`put_device()` instead of calling `kfree()` directly.
This ensures correct device lifetime handling and avoids potential
use-after-free or double-free issues.
Fixes: e5dcf0025d7af ("s390/css: move subchannel lock allocation")
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Merge ACPI power management updates, ACPI sysfs interface updates, an
ACPI support update related to PCI, and an ACPI device resources
management update for 6.20-rc1/7.0-rc1:
- Rework ACPI PM notification setup for PCI root buses and modify the
ACPI PM setup for devices to register wakeup source objects under
physical (that is, PCI, platform, etc.) devices instead of doing that
under their ACPI companions (Rafael Wysocki)
- Adjust debug messages regarding postponed ACPI PM printed during
system resume to be more accurate (Rafael Wysocki)
- Remove dead code from lps0_device_attach() (Gergo Koteles)
- Start to invoke Microsoft Function 9 (Turn On Display) of the Low-
Power S0 Idle (LPS0) _DSM in the suspend-to-idle resume flow on
systems with ACPI LPS0 support to address a functional issue on
Lenovo Yoga Slim 7i Aura (15ILL9), where system fans and keyboard
backlights fail to resume after suspend (Jakob Riemenschneider)
- Add sysfs attribute cid for exposing _CID lists under ACPI device
objects (Rafael Wysocki)
- Replace sprintf() with sysfs_emit() in all of the core ACPI sysfs
interface code (Sumeet Pawnikar)
- Use acpi_get_local_u64_address() in the code implementing ACPI
support for PCI to evaluate _ADR instead of evaluating that object
directly (Andy Shevchenko)
- Add JWIPC JVC9100 to irq1_level_low_skip_override[] to unbreak
serial IRQs on that system (Ai Chao)
* acpi-pm:
ACPI: x86: s2idle: Invoke Microsoft _DSM Function 9 (Turn On Display)
ACPI: PM: Adjust messages regarding postponed ACPI PM
ACPI: x86: s2idle: Remove dead code in lps0_device_attach()
ACPI: PM: Register wakeup sources under physical devices
ACPI: PCI: PM: Rework root bus notification setup
* acpi-sysfs:
ACPI: sysfs: Replace sprintf() with sysfs_emit()
ACPI: sysfs: Add device cid attribute for exposing _CID lists
* acpi-pci:
ACPI: PCI: simplify code with acpi_get_local_u64_address()
* acpi-resource:
ACPI: resource: Add JWIPC JVC9100 to irq1_level_low_skip_override[]
|
|
Merge ARM-related irq subsystem changes based on the recent ACPICA
updates for 6.20-rc1/7.0-rc1:
- Add support for GICv5 ACPI probing on ARM which is based on the
GICv5 MADT structures and ARM IORT IWB node definitions recently
added to ACPICA (Lorenzo Pieralisi)
* acpi-irq:
irqchip/gic-v5: Add ACPI IWB probing
irqchip/gic-v5: Add ACPI ITS probing
irqchip/gic-v5: Add ACPI IRS probing
irqchip/gic-v5: Split IRS probing into OF and generic portions
PCI/MSI: Make the pci_msi_map_rid_ctlr_node() interface firmware agnostic
irqdomain: Add parent field to struct irqchip_fwid
|
|
Merge ACPICA changes for 6.20-rc1/7.0-rc1:
- Update the ACPICA code in the kernel to upstream version 20251212
which includes the following changes:
* Add support for new ACPI table DTPR (Michal Camacho Romero)
* Release objects with acpi_ut_delete_object_desc() (Zilin Guan)
* Add UUIDs for Microsoft fan extensions and UUIDs associated with
TPM 2.0 devices (Armin Wolf)
* Fix NULL pointer dereference in acpi_ev_address_space_dispatch()
(Alexey Simakov)
* Add KEYP ACPI table definition (Dave Jiang)
* Add support for the Microsoft display mux _OSI string (Armin Wolf)
* Add definitions for the IOVT ACPI table (Xianglai Li)
* Abort AML bytecode execution on AML_FATAL_OP (Armin Wolf)
* Include all fields in subtable type1 for PPTT (Ben Horgan)
* Add GICv5 MADT structures and Arm IORT IWB node definitions (Jose
Marinho)
* Update Parameter Block structure for RAS2 and add a new flag in
Memory Affinity Structure for SRAT (Pawel Chmielewski)
* Add _VDM (Voltage Domain) object (Pawel Chmielewski)
* acpica: (26 commits)
ACPICA: Refactor for TPR Base/Limit registers bitmasks
ACPICA: Replace TPRn Base and Limit registers
ACPICA: Logfile: Changes for version 20251212
ACPICA: Align comments in TPRn-related structures
ACPICA: Cleanup comments and DTPR Table handle functions
ACPICA: Verify DTPR and TPR Instance buffer pointers
ACPICA: Fix Segmentation Fault error related to DTPR
ACPICA: Create auxiliary ACPI_TPR_AUX_SR structure for iASL compiler
ACPICA: ACPI 6.6: Add _VDM (Voltage Domain) object
ACPICA: actbl3.h: ACPI 6.6: SRAT: New flag in Memory Affinity Structure
ACPICA: actbl2.h: ACPI 6.6: RAS2: Update Parameter Block structure
ACPICA: Add Arm IORT IWB node definitions
ACPICA: Add GICv5 MADT structures
ACPICA: Fix asltests using the Fatal() opcode
ACPICA: ACPI 6.4: PPTT: include all fields in subtable type1
ACPICA: Abort AML bytecode execution when executing AML_FATAL_OP
ACPICA: Define DTPR structure related info tables and data template
ACPICA: Add DTPR table support for the ASL compiler
ACPICA: iASL: Add definitions for the IOVT table
ACPICA: Add support for the Microsoft display mux _OSI string
...
|
|
Oliver Hartkopp says:
====================
move CAN skb headroom content to skb extensions
CAN bus related skbuffs (ETH_P_CAN/ETH_P_CANFD/ETH_P_CANXL) simply contain
CAN frame structs for CAN CC/FD/XL of skb->len length at skb->data. Those
CAN skbs do not have network/mac/transport headers nor other such
references for encapsulated protocols like ethernet/IP protocols.
To store data for CAN specific use-cases all CAN bus related skbuffs are
created with a 16 byte private skb headroom (struct can_skb_priv). Using
the skb headroom and accessing skb->head for this private data led to
several problems in the past likely due to "The struct can_skb_priv
business is highly unconventional for the networking stack." [1]
This patch set aims to remove the unconventional skb headroom usage for CAN
bus related skbuffs and use the common skb extensions instead.
[1] https://lore.kernel.org/linux-can/20260104074222.29e660ac@kernel.org/
- v1: https://patch.msgid.link/20260125201601.5018-1-socketcan@hartkopp.net
- v2: https://lore.kernel.org/linux-can/20260128-can-skb-ext-v2-0-fe64aa152c8a@pengutronix.de/
- v4: https://lore.kernel.org/netdev/20260128-can_skb_ext-v1-0-330f60fd5d7e@hartkopp.net/
- v5: https://patch.msgid.link/20260129-can_skb_ext-v5-0-21252fdc8900@hartkopp.net
- v6: https://patch.msgid.link/20260130-can_skb_ext-v6-0-8fceafab7f26@hartkopp.net
- v7: https://patch.msgid.link/20260131-can_skb_ext-v7-0-dd0f8f84a83d@hartkopp.net
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
====================
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-0-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As CAN skbs don't use IP checksums the skb->csum_start variable was used to
store the can-gw CAN frame time-to-live counter together with
skb->ip_summed set to CHECKSUM_UNNECESSARY.
Remove the 'hack' using the skb->csum_start variable and move the content
to can_skb_ext::can_gw_hops of the CAN skb extensions.
The module parameter 'max_hops' has been reduced to a single byte to fit
can_skb_ext::can_gw_hops as the maximum value to be stored is 6.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-6-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch removes struct can_skb_priv which was stored at skb->head and
the can_skb_reserve() helper which was used to shift skb->head.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-5-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The can_skb_priv::frame_len variable is used to cache a previous
calculated CAN frame length to be passed to BQL queueing disciplines.
Move the can_skb_priv::frame_len content to can_skb_ext::can_framelen.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-4-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When routing CAN frames over different CAN interfaces the interface index
skb->iif is overwritten with every single hop. To prevent sending a CAN
frame back to its originating (first) incoming CAN interface another
ifindex variable is needed, which was stored in can_skb_priv::ifindex.
Move the can_skb_priv::ifindex content to can_skb_ext::can_iif.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-3-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
To remove the private CAN bus skb headroom infrastructure 8 bytes need to
be stored in the skb. The skb extensions are a common pattern and an easy
and efficient way to hold private data travelling along with the skb. We
only need the skb_ext_add() and skb_ext_find() functions to allocate and
access CAN specific content as the skb helpers to copy/clone/free skbs
automatically take care of skb extensions and their final removal.
This patch introduces the complete CAN skb extensions infrastructure:
- add struct can_skb_ext in new file include/net/can.h
- add include/net/can.h in MAINTAINERS
- add SKB_EXT_CAN to skbuff.c and skbuff.h
- select SKB_EXTENSIONS in Kconfig when CONFIG_CAN is enabled
- check for existing CAN skb extensions in can_rcv() in af_can.c
- add CAN skb extensions allocation at every skb_alloc() location
- duplicate the skb extensions if cloning outgoing skbs (framelen/gw_hops)
- introduce can_skb_ext_add() and can_skb_ext_find() helpers
The patch also corrects an indention issue in the original code from 2018:
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602010426.PnGrYAk3-lkp@intel.com/
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-2-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The can_skb_priv::skbcnt variable is used to identify CAN skbs in the RX
path analogue to the skb->hash.
As the skb hash is not filled in CAN skbs move the private skbcnt value to
skb->hash and set skb->sw_hash accordingly. The skb->hash is a value used
for RPS to identify skbs. Use it as intended.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-1-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
USB system wakeup need its PHY on, so add the GENPD_FLAG_ACTIVE_WAKEUP
flags to USB PHY genpd configuration.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Fixes: 556f5cf9568a ("soc: imx: add i.MX8MP HSIO blk-ctrl")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Current design will power off all dependent GPC power domains in
imx8mp_blk_ctrl_suspend(), even though the user device has enabled
wakeup capability. The result is that wakeup function never works
for such device.
An example will be USB wakeup on i.MX8MP. PHY device '382f0040.usb-phy'
is attached to power domain 'hsioblk-usb-phy2' which is spawned by hsio
block control. A virtual power domain device 'genpd:3:32f10000.blk-ctrl'
is created to build connection with 'hsioblk-usb-phy2' and it depends on
GPC power domain 'usb-otg2'. If device '382f0040.usb-phy' enable wakeup,
only power domain 'hsioblk-usb-phy2' keeps on during system suspend,
power domain 'usb-otg2' is off all the time. So the wakeup event can't
happen.
In order to further establish a connection between the power domains
related to GPC and block control during system suspend, register a genpd
power on/off notifier for the power_dev. This allows us to prevent the GPC
power domain from being powered off, in case the block control power
domain is kept on to serve system wakeup.
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Fixes: 556f5cf9568a ("soc: imx: add i.MX8MP HSIO blk-ctrl")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Recently TC maintainer Jamal intentionally a broke reasonable
use case:
https://lore.kernel.org/netdev/aG10rqwjX6elG1Gx@pop-os.localdomain/
Although I tried my best to help by:
1) Strongly objecting this breakage from the very beginning
2) Reverting it and offering a much better solution
3) Offering Jamal for video chat on 8 Jul 2025 and 26 Nov 2025
None of them worked.
So it makes no sense for me to continue caring about this subsystem.
Most importantly, intentionally breaking reasonable use cases is
against my moral, I don't want to get ashamed.
Thanks for the opportunity!
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://patch.msgid.link/20260130212021.46610-1-xiyou.wangcong@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The following changes are proposed in the upcoming Linux 7.0:
- Enable LZMA support by default, as it's already in use by Fedora 42/43
and some Android vendors for minimal filesystem sizes;
- Promote DEFLATE and Zstandard out of EXPERIMENTAL status, given that
they have been landed and well-tested for over a year and are
already ready for general use.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Compressed folios for ztailpacking pclusters must be valid before adding
these pclusters to I/O chains. Otherwise, z_erofs_decompress_pcluster()
may assume they are already valid and then trigger a NULL pointer
dereference.
It is somewhat hard to reproduce because the inline data is in the same
block as the tail of the compressed indexes, which are usually read just
before. However, it may still happen if a fatal signal arrives while
read_mapping_folio() is running, as shown below:
erofs: (device dm-1): z_erofs_pcluster_begin: failed to get inline data -4
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
...
pc : z_erofs_decompress_queue+0x4c8/0xa14
lr : z_erofs_decompress_queue+0x160/0xa14
sp : ffffffc08b3eb3a0
x29: ffffffc08b3eb570 x28: ffffffc08b3eb418 x27: 0000000000001000
x26: ffffff8086ebdbb8 x25: ffffff8086ebdbb8 x24: 0000000000000001
x23: 0000000000000008 x22: 00000000fffffffb x21: dead000000000700
x20: 00000000000015e7 x19: ffffff808babb400 x18: ffffffc089edc098
x17: 00000000c006287d x16: 00000000c006287d x15: 0000000000000004
x14: ffffff80ba8f8000 x13: 0000000000000004 x12: 00000006589a77c9
x11: 0000000000000015 x10: 0000000000000000 x9 : 0000000000000000
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 000000000000003f
x5 : 0000000000000040 x4 : ffffffffffffffe0 x3 : 0000000000000020
x2 : 0000000000000008 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
z_erofs_decompress_queue+0x4c8/0xa14
z_erofs_runqueue+0x908/0x97c
z_erofs_read_folio+0x128/0x228
filemap_read_folio+0x68/0x128
filemap_get_pages+0x44c/0x8b4
filemap_read+0x12c/0x5b8
generic_file_read_iter+0x4c/0x15c
do_iter_readv_writev+0x188/0x1e0
vfs_iter_read+0xac/0x1a4
backing_file_read_iter+0x170/0x34c
ovl_read_iter+0xf0/0x140
vfs_read+0x28c/0x344
ksys_read+0x80/0xf0
__arm64_sys_read+0x24/0x34
invoke_syscall+0x60/0x114
el0_svc_common+0x88/0xe4
do_el0_svc+0x24/0x30
el0_svc+0x40/0xa8
el0t_64_sync_handler+0x70/0xbc
el0t_64_sync+0x1bc/0x1c0
Fix this by reading the inline data before allocating and adding
the pclusters to the I/O chains.
Fixes: cecf864d3d76 ("erofs: support inline data decompression")
Reported-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-and-tested-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
PPP channels using chan->direct_xmit prepend the PPP header to a skb and
call dev_queue_xmit() directly. In this mode the skb does not need to be
linear, but the PPP netdevice currently does not advertise
scatter-gather features, causing unnecessary linearization and
preventing GSO.
Enable NETIF_F_SG and NETIF_F_FRAGLIST on PPP devices. In case a linear
buffer is required (PPP compression, multilink, and channels without
direct_xmit), call skb_linearize() explicitly.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://patch.msgid.link/20260129012902.941-1-dqfext@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
xe_guc_print_info is void-returning, but the function pointer it is
assigned to expects an int-returning function, leading to the following
CFI error:
[ 206.873690] CFI failure at guc_debugfs_show+0xa1/0xf0 [xe]
(target: xe_guc_print_info+0x0/0x370 [xe]; expected type: 0xbe3bc66a)
Fix this by updating xe_guc_print_info to return an integer.
Fixes: e15826bb3c2c ("drm/xe/guc: Refactor GuC debugfs initialization")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: George D Sworo <george.d.sworo@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20260129182547.32899-2-daniele.ceraolospurio@intel.com
(cherry picked from commit dd8ea2f2ab71b98887fdc426b0651dbb1d1ea760)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Move _raw_write_trylock_irqsave() after the _raw_write_trylock macro to
ensure it uses the inlined version, fixing a linker error when inlining
is enabled. This is the case on s390:
>> ld.lld: error: undefined symbol: _raw_write_trylock
>>> referenced by rwlock_api_smp.h:48 (include/linux/rwlock_api_smp.h:48)
>>> lib/test_context-analysis.o:(test_write_trylock_extra) in archive vmlinux.a
>>> referenced by rwlock_api_smp.h:48 (include/linux/rwlock_api_smp.h:48)
>>> lib/test_context-analysis.o:(test_write_trylock_extra) in archive vmlinux.a
Closes: https://lore.kernel.org/oe-kbuild-all/202602032101.dbxRfsWO-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260203225114.3493538-1-elver@google.com
|
|
kvm_types.h is mandatory in include/asm-generic/Kbuild so having it
in another Kbuild file causes a warning. Remove it from the arch/
Kbuild file to fix the warning.
../scripts/Makefile.asm-headers:39: redundant generic-y found in ../arch/s390/include/asm/Kbuild: kvm_types.h
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260203184204.1329414-1-rdunlap@infradead.org
|
|
There is an audio channel shift issue with multi channel case - the
channel order is correct for the first run, but the channel order is
shifted for the second run. The fix method is to reset the PAI interface
at the end of playback.
The reset can be handled by PM runtime, so enable PM runtime.
Fixes: 0205fae6327a ("drm/bridge: imx: add driver for HDMI TX Parallel Audio Interface")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20260130080910.3532724-1-shengjiu.wang@nxp.com
|
|
Add quirk to support microphone input through headphone jack on Acer Nitro 5 AN515-57 (ALC295).
Signed-off-by: Breno Baptista <brenomb07@gmail.com>
Link: https://patch.msgid.link/20260205024341.26694-1-brenomb07@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
nft_map_catchall_activate() has an inverted element activity check
compared to its non-catchall counterpart nft_mapelem_activate() and
compared to what is logically required.
nft_map_catchall_activate() is called from the abort path to re-activate
catchall map elements that were deactivated during a failed transaction.
It should skip elements that are already active (they don't need
re-activation) and process elements that are inactive (they need to be
restored). Instead, the current code does the opposite: it skips inactive
elements and processes active ones.
Compare the non-catchall activate callback, which is correct:
nft_mapelem_activate():
if (nft_set_elem_active(ext, iter->genmask))
return 0; /* skip active, process inactive */
With the buggy catchall version:
nft_map_catchall_activate():
if (!nft_set_elem_active(ext, genmask))
continue; /* skip inactive, process active */
The consequence is that when a DELSET operation is aborted,
nft_setelem_data_activate() is never called for the catchall element.
For NFT_GOTO verdict elements, this means nft_data_hold() is never
called to restore the chain->use reference count. Each abort cycle
permanently decrements chain->use. Once chain->use reaches zero,
DELCHAIN succeeds and frees the chain while catchall verdict elements
still reference it, resulting in a use-after-free.
This is exploitable for local privilege escalation from an unprivileged
user via user namespaces + nftables on distributions that enable
CONFIG_USER_NS and CONFIG_NF_TABLES.
Fix by removing the negation so the check matches nft_mapelem_activate():
skip active elements, process inactive ones.
Fixes: 628bd3e49cba ("netfilter: nf_tables: drop map element references from preparation phase")
Signed-off-by: Andrew Fasano <andrew.fasano@nist.gov>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
The per-TC rate limit was restricted to 255 Gbps due to the 8-bit
max_bw_value field in the QETC register.
This limit is insufficient for newer, higher-bandwidth NICs.
Extend the rate limit by using the full 16-bit max_bw_value field.
This allows the finer 100Mbps granularity to be used for rates up to
~6.5 Tbps, instead of switching to 1Gbps granularity at higher rates.
The extended range is only used when the device advertises support
via the qetcr_qshr_max_bw_val_msb capability bit in the QCAM register.
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260203073021.1710806-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Tariq Toukan says:
====================
net/mlx5e: RX datapath enhancements
This series by Dragos introduces multiple RX datapath enhancements to
the mlx5e driver.
First patch adds SW handling for oversized packets in non-linear SKB
mode.
Second patch adds a reclaim mechanism to mitigate memory allocation
failures with memory providers.
====================
Link: https://patch.msgid.link/20260203072130.1710255-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When memory providers are used, there is a disconnect between the
page_pool size and the available memory in the provider. This means
that the page_pool can run out of memory if the user didn't provision
a large enough buffer.
Under these conditions, mlx5 gets stuck trying to allocate new
buffers without being able to release existing buffers. This happens due
to the optimization introduced in commit 4c2a13236807
("net/mlx5e: RX, Defer page release in striding rq for better recycling")
which delays WQE releases to increase the chance of page_pool direct
recycling. The optimization was developed before memory providers
existed and this circumstance was not considered.
This patch unblocks the queue by reclaiming pages from WQEs that can be
freed and doing a one-shot retry. A WQE can be freed when:
1) All its strides have been consumed (WQE is no longer in linked list).
2) The WQE pages/netmems have not been previously released.
This reclaim mechanism is useful for regular pages as well.
Note that provisioning memory that can't fill even one MPWQE (64
4K pages) will still render the queue unusable. Same when
the application doesn't release its buffers for various reasons.
Or a combination of the two: a very small buffer is provisioned,
application releases buffers in bulk, bulk size never reached
=> queue is stuck.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260203072130.1710255-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently the driver has an inconsistent behaviour between modes when it
comes to oversized packets that are not dropped through the physical MTU
check in HW. This can happen for Multi Host configurations where each
port has a different MTU.
Current behavior:
1) Striding RQ in linear mode drops the packet in SW and counts it
with oversize_pkts_sw_drop.
2) Striding RQ in non-linear mode allows it like a normal packet.
3) Legacy RQ can't receive oversized packets by design:
the RX WQE uses MTU sized packet buffers.
This inconsistency is not a violation of the netdev policy [1]
but it is better to be consistent across modes.
This patch aligns (2) with (1) and (3). One exception is added for
LRO: don't drop the oversized packet if it is an LRO packet.
As now rq->hw_mtu always needs to be updated during the MTU change flow,
drop the reset avoidance optimization from mlx5e_change_mtu().
Extract the CQE LRO segments reading into a helper function as it
is used twice now.
[1] Documentation/networking/netdevices.rst#L205
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260203072130.1710255-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The dwmac databook for v3.74a states that lpi_intr_o is a sideband
signal which should be used to ungate the application clock, and this
signal is synchronous to the receive clock. The receive clock can run
at 2.5, 25 or 125MHz depending on the media speed, and can stop under
the control of the link partner. This means that the time it takes to
clear is dependent on the negotiated media speed, and thus can be 8,
40, or 400ns after reading the LPI control and status register.
It has been observed with some aggressive link partners, this clock
can stop while lpi_intr_o is still asserted, meaning that the signal
remains asserted for an indefinite period that the local system has
no direct control over.
The LPI interrupts will still be signalled through the main interrupt
path in any case, and this path is not dependent on the receive clock.
This, since we do not gate the application clock, and the chances of
adding clock gating in the future are slim due to the clocks being
ill-defined, lpi_intr_o serves no useful purpose. Remove the code which
requests the interrupt, and all associated code.
Reported-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Tested-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com> # Renesas RZ/V2H board
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vnJbt-00000007YYN-28nm@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Russell King says:
====================
net: stmmac: fix serdes power methods
The stmmac serdes powerup/powerdown methods are not guaranteed to be
called in a balancing fashion, but these are used to call the generic
PHY subsystem's phy_power_up() and phy_power_down() methods which do
require balanced calls.
This series addresses this by making the stmmac serdes methods balanced.
====================
Link: https://patch.msgid.link/aYHHWm5UkD1JVa7D@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the SerDes power up and down calls for the non-"after linkup"
case out of __stmmac_open() and __stmmac_release() into the
stmmac_open() and stmmac_release() methods, which means the SerDes
will only change power state on administrative changes or suspend/
resume, not while changing the interface MTU.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vnDDt-00000007XxF-3uUK@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The open path is missing cleanup of a successful serdes power up if
stmmac_hw_setup() or stmmac_request_irq() fails.
stmmac_resume() is also missing cleanup of the serdes power up if
stmmac_hw_setup() fails.
Add the missing cleanups.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vnDDo-00000007Xx9-3RZ8@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Avoid calling the serdes_powerdown() method if we have not had a
preceeding successful call to the serdes_powerup() method. This
avoids unbalancing refcounted resources that may be used in the
these platform glue serdes methods.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vnDDj-00000007Xx3-2xZ0@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add wrappers for the serdes_power[up|down]() methods and update all
call sites. This will allow us to add state tracking.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vnDDe-00000007Xww-2VUU@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allison Henderson says:
====================
net/rds: RDS-TCP protocol and extension improvements
This is subset 3 of the larger RDS-TCP patch series I posted last
Oct. The greater series aims to correct multiple rds-tcp issues that
can cause dropped or out of sequence messages. I've broken it down into
smaller sets to make reviews more manageable.
In this set, we introduce extension headers for byte accounting
and fix several RDS/TCP protocol issues including message preservation
during connection transitions and multipath lane handling.
The entire set can be viewed in the rfc here:
https://lore.kernel.org/netdev/20251022191715.157755-1-achender@kernel.org/
====================
Link: https://patch.msgid.link/20260203055723.1085751-1-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
