| Age | Commit message (Collapse) | Author |
|---|
|
This binding covers class of simple SPI ADCs which only provide
data output - they don't have MOSI pin.
The only real variation between them is over how many supplies they
use and which one is used for the reference.
Michael listed as maintainer for this one as it is his driver and
falls under the catch all MAINTAINERS entry for ADI devices.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210425163154.73209-3-jic23@kernel.org
|
|
Fairly simple conversion with the exception of the XOR between
spi-cpha and spi-cpol.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/20201031134110.724233-17-jic23@kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210401140956.224084-3-jic23@kernel.org
|
|
The device has a tsens-busy pin, but it's both fiddly and currently
ignored by the Linux driver. Given it's not clear whether the binding
should be an interrupt, or a GPIO I have left that out for now.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210401174112.320497-7-jic23@kernel.org
|
|
Binding documentation for this driver was missing.
Note that the binding and some in tree dts files specifiy interrupts
etc but the driver is fairly simple and does not yet make use of them.
Listed both Joachim and myself as maintainers for this binding on basis
it's Joachim's driver but I don't want to volunteer Joachim too
strongly to look after this doc.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Joachim Eastwood <manabian@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210401174112.320497-4-jic23@kernel.org
|
|
Linux driver currently relies on the driver.name to match to the
compatible, but that doesn't mean it isn't a good idea to document it.
Only real complexity is the 3 separate power supplies.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210401174112.320497-3-jic23@kernel.org
|
|
These two devices have different internal characteristics, but their
external connectivity and as a result device tree descriptions are
identical.
Note that neither driver in Linux currently has an of_match_table
but instead rely on matching via name alone.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210401174112.320497-2-jic23@kernel.org
|
|
Device tree binding for AMS/TAOS tsl2591 ambient light sensor.
This driver supports configuration via device tree and sysfs.
Supported channels for raw infrared light intensity,
raw combined light intensity and illuminance in lux.
The driver additionally supports iio events on lower and
upper thresholds.
This is a very-high sensitivity light-to-digital converter that
transforms light intensity into a digital signal.
Signed-off-by: Joe Sandom <joe.g.sandom@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210421221330.17007-2-joe.g.sandom@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This adjusts the ST Sensor bindings with the more fine-grained
syntax checks that were proposed late in the last kernel cycle
and colliding with parallel work.
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210412122331.1631643-1-linus.walleij@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add devicetree binding document for TMP117, a digital temperature sensor.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210407182147.77221-2-puranjay12@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Refactor powerpc and arm64 kexec DT handling to common code. This
enables IMA on arm64.
- Add kbuild support for applying DT overlays at build time. The first
user are the DT unittests.
- Fix kerneldoc formatting and W=1 warnings in drivers/of/
- Fix handling 64-bit flag on PCI resources
- Bump dtschema version required to v2021.2.1
- Enable undocumented compatible checks for dtbs_check. This allows
tracking of missing binding schemas.
- DT docs improvements. Regroup the DT docs and add the example schema
and DT kernel ABI docs to the doc build.
- Convert Broadcom Bluetooth and video-mux bindings to schema
- Add QCom sm8250 Venus video codec binding schema
- Add vendor prefixes for AESOP, YIC System Co., Ltd, and Siliconfile
Technologies Inc.
- Cleanup of DT schema type references on common properties and
standard unit properties
* tag 'devicetree-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits)
powerpc: If kexec_build_elf_info() fails return immediately from elf64_load()
powerpc: Free fdt on error in elf64_load()
of: overlay: Fix kerneldoc warning in of_overlay_remove()
of: linux/of.h: fix kernel-doc warnings
of/pci: Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses
dt-bindings: bcm4329-fmac: add optional brcm,ccode-map
docs: dt: update writing-schema.rst references
dt-bindings: media: venus: Add sm8250 dt schema
of: base: Fix spelling issue with function param 'prop'
docs: dt: Add DT API documentation
of: Add missing 'Return' section in kerneldoc comments
of: Fix kerneldoc output formatting
docs: dt: Group DT docs into relevant sub-sections
docs: dt: Make 'Devicetree' wording more consistent
docs: dt: writing-schema: Include the example schema in the doc build
docs: dt: writing-schema: Remove spurious indentation
dt-bindings: Fix reference in submitting-patches.rst to the DT ABI doc
dt-bindings: ddr: Add optional manufacturer and revision ID to LPDDR3
dt-bindings: media: video-interfaces: Drop the example
devicetree: bindings: clock: Minor typo fix in the file armada3700-tbg-clock.txt
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO driver updates from Greg KH:
"Here is the big set of staging and IIO driver updates for 5.13-rc1.
Lots of little churn in here, and some larger churn as well. Major
things are:
- removal of wimax drivers, no one has this hardware anymore for this
failed "experiment".
- removal of the Google gasket driver, turns out no one wanted to
maintain it or cares about it anymore, so they asked for it to be
removed.
- comedi finally moves out of the staging directory into drivers/comedi
This is one of the oldest kernel subsystems around, being created
in the 2.0 kernel days, and was one of the first things added to
drivers/staging/ when that was created over 15 years ago.
It should have been moved out of staging a long time ago, it's well
maintained and used by loads of different devices in the real world
every day. Nice to see this finally happen.
- so many tiny coding style cleanups it's not funny.
Perfect storm of at least 2 different intern project application
deadlines combined to provide a huge number of new contributions in
this area from people learning how to do kernel development. Great
job to everyone involved here.
There's also the normal updates for IIO drivers with new IIO drivers
and updates all over that subsystem.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (907 commits)
staging: octeon: Use 'for_each_child_of_node'
Staging: rtl8723bs: rtw_xmit: fixed tabbing issue
staging: rtl8188eu: remove unused function parameters
staging: rtl8188eu: cmdThread is a task_struct
staging: rtl8188eu: remove constant variable and dead code
staging: rtl8188eu: change bLeisurePs' type to bool
staging: rtl8723bs: remove empty #ifdef block
staging: rtl8723bs: remove unused DBG_871X_LEVEL macro declarations
staging: rtl8723bs: split too long line
staging: rtl8723bs: fix indentation in if block
staging: rtl8723bs: fix code indent issue
staging: rtl8723bs: replace DBG_871X_LEVEL logs with netdev_*()
staging: rtl8192e: indent statement properly
staging: rtl8723bs: Remove led_blink_hdl() and everything related
staging: comedi: move out of staging directory
staging: rtl8723bs: remove sdio_drv_priv structure
staging: rtl8723bs: remove unused argument in function
staging: rtl8723bs: remove DBG_871X_SEL_NL macro declaration
staging: rtl8723bs: replace DBG_871X_SEL_NL with netdev_dbg()
staging: rtl8723bs: fix indentation issue introduced by long line split
...
|
|
The iio-bindings.txt was converted into two files and merged
at the dt-schema git tree at:
https://github.com/devicetree-org/dt-schema
Yet, some documents still refer to the old file. Fix their
references, in order to point to the right URL.
Fixes: dba91f82d580 ("dt-bindings:iio:iio-binding.txt Drop file as content now in dt-schema")
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/4efd81eca266ca0875d3bf9d1672097444146c69.1617972339.git.mchehab+huawei@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Binding covering the ad7150, ad7151 and ad7156 capacitance to digital
convertors. The only difference between these is how many channels they
have (1 or 2)
Whilst it is clearly necessary to provide power to the part, we don't
need to know the voltage or anything so if it is always on, there should
be no need to have it specified in the binding.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210314181511.531414-24-jic23@kernel.org
|
|
This commit adds dt-binding documentation of auxadc for Mediatek MT8195 SoC
Platform.
Signed-off-by: Seiya Wang <seiya.wang@mediatek.com>
Link: https://lore.kernel.org/r/20210319023427.16711-7-seiya.wang@mediatek.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add support for ST magnetometer IIS2MDC,
an I2C/SPI interface 3-axis magnetometer sensor.
The patch was tested on the instrument with IIS2MDC via I2C interface.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
Link: https://lore.kernel.org/r/20210317063902.19300-2-Qing-wu.Li@leica-geosystems.com.cn
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Some cros ECs support a front proximity MKBP event via
'EC_MKBP_FRONT_PROXIMITY'. Add a DT binding to document this feature via
a node that is a child of the main cros_ec device node. Devices that
have this ability will describe this in firmware.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Benson Leung <bleung@chromium.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: <devicetree@vger.kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210211024601.1963379-3-swboyd@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Adding checks for undocumented compatible strings reveals a bunch of
warnings in the DT binding examples. Fix the cases which are typos, just
a mismatch between the schema and the example, or aren't documented at all.
In a couple of cases, fixing the compatible revealed some schema errors
which are fixed.
There's a bunch of others remaining after this which have bindings, but
those aren't converted to schema yet.
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: linux-clk@vger.kernel.org
Cc: dmaengine@vger.kernel.org
Cc: linux-i3c@lists.infradead.org
Cc: linux-iio@vger.kernel.org
Cc: linux-leds@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: linux-spi@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20210316194918.3528417-1-robh@kernel.org
|
|
Properties with standard unit suffixes already have a type and don't need
type references. Fix a few more cases which have gotten added.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Kevin Tsai <ktsai@capellamicro.com>
Cc: linux-iio@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Dmity Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20210316194824.3526913-1-robh@kernel.org
|
|
`adi,scaled-output-hz` is no longer used by the driver.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210218114039.216091-4-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add a device tree binding documentation for Texas Instruments
ADS131E0x ADC family driver.
Signed-off-by: Tomislav Denis <tomislav.denis@avl.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210202084107.3260-3-tomislav.denis@avl.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This adds the device-tree bindings for the Bosch Sensortec BMI088 IMU,
the accelerometer part.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210125150732.23873-1-mike.looijmans@topic.nl
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Sync dtc to upstream version v1.6.0-51-g183df9e9c2b9 and build host
fdtoverlay
- Add kbuild support to build DT overlays (%.dtbo)
- Drop NULLifying match table in of_match_device().
In preparation for this, there are several driver cleanups to use
(of_)?device_get_match_data().
- Drop pointless wrappers from DT struct device API
- Convert USB binding schemas to use graph schema and remove old plain
text graph binding doc
- Convert spi-nor and v3d GPU bindings to DT schema
- Tree wide schema fixes for if/then schemas, array size constraints,
and undocumented compatible strings in examples
- Handle 'no-map' correctly for already reserved memblock regions
* tag 'devicetree-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits)
driver core: platform: Drop of_device_node_put() wrapper
of: Remove of_dev_{get,put}()
dt-bindings: usb: Change descibe to describe in usbmisc-imx.txt
dt-bindings: can: rcar_canfd: Group tuples in pin control properties
dt-bindings: power: renesas,apmu: Group tuples in cpus properties
dt-bindings: mtd: spi-nor: Convert to DT schema format
dt-bindings: Use portable sort for version cmp
dt-bindings: ethernet-controller: fix fixed-link specification
dt-bindings: irqchip: Add node name to PRUSS INTC
dt-bindings: interconnect: Fix the expected number of cells
dt-bindings: Fix errors in 'if' schemas
dt-bindings: iommu: renesas,ipmmu-vmsa: Make 'power-domains' conditionally required
dt-bindings: Fix undocumented compatible strings in examples
kbuild: Add support to build overlays (%.dtbo)
scripts: dtc: Remove the unused fdtdump.c file
scripts: dtc: Build fdtoverlay tool
scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9
scripts: dtc: Fetch fdtoverlay.c from external DTC project
dt-bindings: thermal: sun8i: Fix misplaced schema keyword in compatible strings
dt-bindings: iio: dac: Fix AD5686 references
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO driver updates from Greg KH:
"Here is the "big" set of staging and IIO driver patches for 5.12-rc1.
Nothing really huge in here, the number of staging tree patches has
gone down for a bit, maybe there's only so much churn to happen in
here at the moment.
The IIO changes are:
- new drivers
- new DT bindings
- new iio driver features
with full details in the shortlog.
The staging driver patches are just a lot of tiny coding style
cleanups, along with some semi-larger hikey driver cleanups as those
are _almost_ good enough to get out of the staging tree, but will
probably have to wait until 5.13 to have happen.
All of these have been in linux-next with no reported issues"
* tag 'staging-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (189 commits)
staging: hikey9xx: Fix alignment of function parameters
staging: greybus: Fixed a misspelling in hid.c
staging: wimax/i2400m: fix some byte order issues found by sparse
staging: wimax: i2400m: fix some incorrect type warnings
staging: greybus: minor code style fix
staging:wlan-ng: use memdup_user instead of kmalloc/copy_from_user
staging:r8188eu: use IEEE80211_FCTL_* kernel definitions
staging: rtl8192e: remove multiple blank lines
staging: greybus: Fixed alignment issue in hid.c
staging: wfx: remove unused included header files
staging: nvec: minor coding style fix
staging: wimax: Fix some coding style problem
staging: fbtft: add tearing signal detect
staging: vt6656: Fixed issue with alignment in rf.c
staging: qlge: Remove duplicate word in comment
staging: rtl8723bs: remove obsolete commented out code
staging: rtl8723bs: fix function comments to follow kernel-doc
staging: wfx: avoid defining array of flexible struct
staging: rtl8723bs: Replace one-element array with flexible-array member in struct ndis_80211_var_ie
staging: Replace lkml.org links with lore
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann:
"After the last release contained a surprising amount of new 32-bit
machines, this time two thirds of the code changes are for 64-bit.
The usual updates to existing files include:
- Device tree compiler warning fixes for Berlin, Renesas, SoCFPGA,
nomadik, stm32, Allwinner, TI Keystone
- Support for additional devices on existing machines on Renesas,
SoCFPGA, at91, hisilicon, OMAP, Tegra, TI K3, Allwinner, Broadcom,
ux500, Mediatek, Marvell Armada, Marvell MMP, ZynqMP, AMLogic,
Qualcomm, i.MX, Layerscape, Actions, ASpeed, Toshiba
- Cleanups and minor fixes for Renesas, at91, mstar, ux500, Samsung,
stm32, Tegra, Broadcom, Mediatek, Marvell MMP, AMLogic, Qualcomm,
i.MX, Rockchip, ASpeed, Zynq
Only three new SoCs this time, but a number of boards across:
Renesas:
- Two Beacon EmbeddedWorks boards (RZ/G2H and RZ/G2N based)
Intel SoCFPGA:
- eASIC N5X board (N5X)
ST-Ericsson Ux500:
- Samsung GT-I9070 (Janice) phone (u8500)
TI OMAP:
- MYIR Tech Limited development board (AM335X)
Allwinner/sunxi:
- SL631 Action Camera (V3)
- PineTab Early Adopter tablet (A64)
Broadcom:
- BCM4906 networking chip
- Netgear R8000P router (BCM4906)
AMLogic:
- Hardkernel ODROID-HC4 development board (SM1)
- Beelink GS-King-X TV Box (S922X)
Qualcomm:
- Snapdragon 888 / SM8350 high-end phone SoC
- Qualcomm SDX55 5G modem as standalone SoC
- Snapdragon MTP reference board (SM8350)
- Snapdragon MTP reference board (SDX55)
- Sony Kitakami phones: Xperia Z3+/Z4/Z5 (APQ8094)
- Alcatel Idol 3 phone (MSM8916)
- ASUS Zenfone 2 Laser phone (MSM8916)
- BQ Aquaris X5 aka Longcheer L8910 phone (MSM8916)
- OnePlus6 phone (SDM845)
- OnePlus6T phone (SDM845)
- Alfa Network AP120C-AC access point (IPQ4018)
NXP i.MX6 (32-bit):
- Plymovent BAS base system controller for filter systems (imx6dl)
- Protonic MVT industrial touchscreen terminals (imx6dl)
- Protonic PRTI6G reference board (imx6ul)
- Kverneland UT1, UT1Q, UT1P, TGO agricultural terminals (imx6q/dl/qp)
NXP i.MX8 (64-bit)
- Beacon i.MX8M Nano development kit (imx8mn)
- Boundary Devices i.MX8MM Nitrogen SBC (imx8mm)
- Gateworks Venice i.MX 8M Mini Development Kits (imx8mm)
- phyBOARD-Pollux-i.MX8MP (imx8mp)
- Purism Librem5 Evergreen phone (imx8mp)
- Kontron SMARC-sAL28 system-on-module(imx8mp)
Rockchip:
- NanoPi M4B Single-board computer (RK3399)
- Radxa Rock Pi E router SBC (RK3328)
ASpeed:
- Ampere Mt. Jade, a BMC for an x86 server (AST2500)
- IBM Everest, a BMC for a Power10 server (AST2600)
- Supermicro x11spi, a BMC for an ARM server (AST2500)
Zynq:
- Ebang EBAZ4205, FPGA board (Zynq-7000)
- ZynqMP zcu104 revC reference platform (ZynqMP)"
* tag 'arm-dt-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (584 commits)
ARM: dts: aspeed: align GPIO hog names with dtschema
ARM: dts: aspeed: fix PCA95xx GPIO expander properties on Portwell
dt-bindings: spi: zynq: Convert Zynq QSPI binding to yaml
arm: dts: visconti: Add DT support for Toshiba Visconti5 GPIO driver
ARM: dts: aspeed: ast2600evb: Add enable ehci and uhci
ARM: dts: aspeed: mowgli: Add i2c rtc device
ARM: dts: aspeed: amd-ethanolx: Enable secondary LPC snooping address
dt-bindings: arm: xilinx: Add missing Zturn boards
ARM: dts: ebaz4205: add pinctrl entries for switches
ARM: dts: add Ebang EBAZ4205 device tree
dt-bindings: arm: add Ebang EBAZ4205 board
dt-bindings: add ebang vendor prefix
ARM: dts: aspeed: Add Everest BMC machine
ARM: dts: aspeed: inspur-fp5280g2: Add ipsps1 driver
ARM: dts: aspeed: inspur-fp5280g2: Add GPIO line names
ARM: dts: aspeed: Add Supermicro x11spi BMC machine
ARM: dts: aspeed: g220a: Fix some gpio
ARM: dts: aspeed: g220a: Enable ipmb
ARM: dts: aspeed: rainier: Add eMMC clock phase compensation
ARM: dts: aspeed: Add LCLK to lpc-snoop
...
|
|
The example and filename use 'adi,ad5686', but the schema doesn't
document it. The AD5686 is also a SPI interface variant while all the
documented variants have an I2C interface. So let's update all the
references to AD5686 to AD5696.
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Michael Auchter <michael.auchter@ni.com>
Cc: linux-iio@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20210202215503.114113-1-robh@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Cleanups on properties with standard unit suffixes
- Fix overwriting dma_range_map if there's no 'dma-ranges' property
- Fix a bug when creating a /chosen node from ARM ATAGs
- Add missing properties for TI j721e USB binding
- Several doc reference updates due to DT schema conversions
* tag 'devicetree-fixes-for-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: Cleanup standard unit properties
of/device: Update dma_range_map only when dev has valid dma-ranges
ARM: zImage: atags_to_fdt: Fix node names on added root nodes
dt-bindings: usb: j721e: add ranges and dma-coherent props
dt-bindings:iio:adc: update adc.yaml reference
dt-bindings: memory: mediatek: update mediatek,smi-larb.yaml references
dt-bindings: display: mediatek: update mediatek,dpi.yaml reference
ASoC: audio-graph-card: update audio-graph-card.yaml reference
|
|
Properties with standard unit suffixes already have a type and don't need
type definitions. They also default to a single entry, so 'maxItems: 1'
can be dropped.
adi,ad5758 is an oddball which defined an enum of arrays. While a valid
schema, it is simpler as a whole to only define scalar constraints.
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: linux-hwmon@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-input@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-watchdog@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sebastian Reichel <sre@kernel.org> # for power-supply
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio
Acked-by: Alexandre TORGUE <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20210128194515.743252-1-robh@kernel.org
|
|
Changeset b70d154d6558 ("dt-bindings:iio:adc: convert adc.txt to yaml")
renamed: Documentation/devicetree/bindings/iio/adc/adc.txt
to: Documentation/devicetree/bindings/iio/adc/adc.yaml.
Update its cross-reference accordingly.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/8e37dba8ae9099acd649bab8a1cf718caa4f3e6a.1610535350.git.mchehab+huawei@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
We need the IIO/Staging fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This adds device tree bindings for the AD5766 DAC.
Signed-off-by: Cristian Pop <cristian.pop@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210115112105.58652-1-cristian.pop@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
BMC150 needs VDD and VDDIO regulators that might need to be explicitly
enabled. Document support for vdd/vddio-supply to implement this.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210109152327.512538-1-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
BMG160 needs VDD and VDDIO regulators that might need to be explicitly
enabled. Document support for vdd/vddio-supply to implement this.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201211183815.51269-1-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
kxcjk1013 devices have VDD and VDDIO power lines. Need
to make sure the regulators are enabled before any
communication with kxcjk1013. Document support for
vdd/vddio-supply to implement this.
Signed-off-by: Devajith V S <devajithvs@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201213172437.2779-1-devajithvs@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The AXP803 compatible was introduced recently with a fallback to the
AXP813, but it was never documented.
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20210114113538.1233933-2-maxime@cerno.tech
|
|
The bmc150-accel-i2c.c driver has an "_accel" suffix for the
compatibles of BMC150 and BMI055. This is necessary because BMC150
contains both accelerometer (bosch,bmc150_accel) and magnetometer
(bosch,bmc150_magn) and therefore "bosch,bmc150" would be ambiguous.
However, the binding documentation suggests using "bosch,bmc150".
Add the "_accel" suffix for BMC150 and BMI055 so the binding docs
match what is expected by the driver.
Fixes: 6259551cf19b ("iio: accel: bmc150-accel: Add DT bindings")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201202083551.7753-1-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
DT properties which can have multiple entries need to specify what the
entries are and define how many entries there can be. In the case of
only a single entry, just 'maxItems: 1' is sufficient.
Add the missing entry constraints. These were found with a modified
meta-schema. Unfortunately, there are a few cases where the size
constraints are not defined such as common bindings, so the meta-schema
can't be part of the normal checks.
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210104230253.2805217-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Cut and paste error.
Documentation/devicetree/bindings/iio/health/ti,afe4403.example.dt.yaml:
heart_mon@0: 'spi-max-frequency' does not match any of the regexes:
'pinctrl-[0-9]+'
Reported-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes: f494151b5eba ("dt-bindings:iio:health:ti,afe4404: txt to yaml conversion")
Link: https://lore.kernel.org/r/20201230121919.238335-1-jic23@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The vdd-supply property is optional if vref-supply is provided for
mcp4726.
Also the microchip,vref-buffered makes sense only if vref-supply is
specified.
Spotted by Jonathan during conversion to yaml.
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Tomas Novotny <tomas@novotny.cz>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201216101316.1403-1-tomas@novotny.cz
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This adds device tree bindings for the Yamaha YAS530
family of magnetometers/compass sensors.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: phone-devel@vger.kernel.org
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Jonathan Bakker <xc-racer2@live.ca>
Link: https://lore.kernel.org/r/20201224120820.1120099-1-linus.walleij@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
MPU-6880 seems to be very similar to MPU-6500 / MPU-6050 and it works
fine with some minor additions for the mpu6050 driver.
Add a compatible for it to the binding documentation.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Link: https://lore.kernel.org/r/20201202104656.5119-1-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Very similar to the mpu6050 binding.
Only unusual element is the i2c-gate section.
Example tweaked a little to include a real device behind the gate.
As Rob Herring suggested, dropped use of explicit i2c-gate yaml
binding in favour of just using the i2c-controller.yaml binding
directly.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201128173343.390165-4-jic23@kernel.org
|
|
As Rob Herring suggested, this no long requires the explicit
i2c-gate binding, but instead just used i2c-controller.yaml
directly.
2 prior examples combinded into one as a single example can show
all of the binding elements as long as the right part is selected.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20201128173343.390165-3-jic23@kernel.org
|
|
Add binding documentation for the Xilinx System Management Wizard. The
Xilinx System Management Wizard is a AXI frontend for the Xilinx System
Monitor found in the UltraScale and UltraScale+ FPGAs.
The System Monitor is the equivalent to the Xilinx XADC found in their
previous generation of FPGAs and their external and internal interfaces are
very similar. For this reason the share the same binding documentation. But
since they are not 100% compatible and software will have to know about the
differences they use a different compatible string.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20200922134624.13191-1-lars@metafoo.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
*-supply properties are always a single phandle, so binding schemas
don't need a type $ref nor 'maxItems'.
A meta-schema check for this is pending once these existing cases are
fixed.
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-iio@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-media@vger.kernel.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20201221234659.824881-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The correct syntax for JSON pointers begins with a '/' after the '#'.
Without a '/', the string should be interpreted as a subschema
identifier. The jsonschema module currently doesn't handle subschema
identifiers and incorrectly allows JSON pointers to begin without a '/'.
Let's fix this before it becomes a problem when jsonschema module is
fixed.
Converted with:
perl -p -i -e 's/yaml#definitions/yaml#\/definitions/g' `find Documentation/devicetree/bindings/ -name "*.yaml"`
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: netdev@vger.kernel.org
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20201217223429.354283-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging / IIO driver updates from Greg KH:
"Here is the big staging and IIO driver pull request for 5.11-rc1
Lots of different things in here:
- loads of driver updates
- so many coding style cleanups
- new IIO drivers
- Android ION code is finally removed from the tree
- wimax drivers are moved to staging on their way out of the kernel
Nothing really exciting, just the constant grind of kernel development :)
All have been in linux-next for a while with no reported issues"
* tag 'staging-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (341 commits)
staging: olpc_dcon: Do not call platform_device_unregister() in dcon_probe()
staging: most: Fix spelling mistake "tranceiver" -> "transceiver"
staging: qlge: remove duplicate word in comment
staging: comedi: mf6x4: Fix AI end-of-conversion detection
staging: greybus: Add TODO item about modernizing the pwm code
pinctrl: ralink: add a pinctrl driver for the rt2880 family
dt-bindings: pinctrl: rt2880: add binding document
staging: rtl8723bs: remove ELEMENT_ID enum
staging: rtl8723bs: remove unused macros
staging: rtl8723bs: replace EID_EXTCapability
staging: rtl8723bs: replace EID_BSSIntolerantChlReport
staging: rtl8723bs: replace EID_BSSCoexistence
staging: rtl8723bs: replace _MME_IE_
staging: rtl8723bs: replace _WAPI_IE_
staging: rtl8723bs: replace _EXT_SUPPORTEDRATES_IE_
staging: rtl8723bs: replace _ERPINFO_IE_
staging: rtl8723bs: replace _CHLGETXT_IE_
staging: rtl8723bs: replace _COUNTRY_IE_
staging: rtl8723bs: replace _IBSS_PARA_IE_
staging: rtl8723bs: replace _TIM_IE_
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into asoc-5.11
Auxiliary Bus support tag for 5.11-rc1
This is a signed tag for other subsystems to be able to pull in the
auxiliary bus support into their trees for the 5.11-rc1 merge.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/501ff8187d2df584ec978c7e7ec5c445c3d0741c.1606642528.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The trigger child nodes are not necessary anymore as they are defined
directly by the driver, depending on the compatible string.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Rob Herring <robh+dt@kernel.org>
Link: https://lore.kernel.org/r/20201128222818.1910764-7-alexandre.belloni@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
There are a few things we would do differently in an ADC binding if we
were starting from scratch but we are stuck with what we have (which
made sense back when this was written!)
We may be able to tighten up some elements of this binding in the future
by careful checking of what values properties can actually take.
Note the unusual sign off chain is representative of the path this patch
took.
Jonathan wrote the patch, which was then included in a series by
Alexandre and ultimately applied by Jonathan.
[Alexandre Belloni: add sama5d3, remove atmel,adc-res and atmel,adc-res-names]
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20201128222818.1910764-5-alexandre.belloni@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
