summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/mips/lantiq
AgeCommit message (Collapse)Author
2019-02-25MIPS: lantiq: Remove separate GPHY Firmware loaderHauke Mehrtens
The separate GPHY Firmware loader driver is not used any more, the GPHY firmware is now loaded by the GSWIP switch driver which also makes use of the GPHY. Remove the old unused GPHY firmware loader driver. The GPHY firmware is useless without an Ethernet and switch driver, it should not harm if loading this does not work for system using an old device tree. I am not aware of any vendor separating the device tree from the kernel binary, it should be ok to remove this. The code and the functionality form this separate GPHY firmware loader was added to the gswip driver in commit 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: john@phrozen.org Cc: netdev@vger.kernel.org
2018-04-18dt-bindings: more status property removal from examplesRob Herring
Whack-a-mole some more occurrences of status in examples. Acked-by: Vinod Koul <vinod.koul@intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Boris Brezillon <boris.brezillon@bootlin.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Tanmay Inamdar <tinamdar@apm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-09-04MIPS: lantiq: Add a GPHY driver which uses the RCU syscon-mfdMartin Blumenstingl
Compared to the old xrx200_phy_fw driver the new version has multiple enhancements. The name of the firmware files does not have to be added to all .dts files anymore - one now configures the GPHY mode (FE or GE) instead. Each GPHY can now also boot separate firmware (thus mixing of GE and FE GPHYs is now possible). The new implementation is based on the RCU syscon-mfd and uses the reeset_controller framework instead of raw RCU register reads/writes. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Cc: john@phrozen.org Cc: p.zabel@pengutronix.de Cc: kishon@ti.com Cc: mark.rutland@arm.com Cc: linux-mips@linux-mips.org Cc: linux-mtd@lists.infradead.org Cc: linux-watchdog@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-spi@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17128/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04MIPS: lantiq: Convert the fpi bus driver to a platform_driverHauke Mehrtens
Instead of hacking the configuration of the FPI bus into the arch code add an own bus driver for this internal bus. The FPI bus is the main bus of the SoC. This bus driver makes sure the bus is configured correctly before the child drivers are getting initialized. This driver will probably also be used on different SoCs later. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: john@phrozen.org Cc: p.zabel@pengutronix.de Cc: kishon@ti.com Cc: mark.rutland@arm.com Cc: linux-mips@linux-mips.org Cc: linux-mtd@lists.infradead.org Cc: linux-watchdog@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-spi@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17122/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04Documentation: DT: MIPS: lantiq: Add docs for the RCU bindingsHauke Mehrtens
This adds the initial documentation for the RCU module (a MFD device which provides USB PHYs, reset controllers and more). The RCU register range is used for multiple purposes. Mostly one device uses one or multiple register exclusively, but for some registers some bits are for one driver and some other bits are for a different driver. With this patch all accesses to the RCU registers will go through syscon. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Rob Herring <robh@kernel.org> Cc: john@phrozen.org Cc: andy.shevchenko@gmail.com Cc: p.zabel@pengutronix.de Cc: kishon@ti.com Cc: mark.rutland@arm.com Cc: linux-mips@linux-mips.org Cc: linux-mtd@lists.infradead.org Cc: linux-watchdog@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-spi@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17121/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>