summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings
AgeCommit message (Collapse)Author
2020-11-26MLK-24171-2 dt-binding: phy: update the clock modes of pcie phyRichard Zhu
Update the clock modes of iMX8MP PCIe PHY in binding DOC. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Fugang Duan <fugang.duan@nxp.com> (cherry picked from commit eade3750bf840948b29db26f0beabf10dea5f981)
2020-11-25net: stmmac: dwmac-imx: add phy-supplyMax Krummenacher
Add an support for an optional regulator which powers an attached phy. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2020-11-13Merge commit '70d1232fdbe28e4c765c4cfc3cc5c7580959d5e0' into ↵Igor Opaniuk
toradex_5.4-2.1.x-imx Update 5.4-2.1.x-imx to v5.4.74 from [1]. [1] https://github.com/Freescale/linux-fslc
2020-10-21dt-bindings: mfd: nxp,pca9450: document i2c-lt-en propertyMax Krummenacher
Related-to: ELB-3132 Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2020-10-07Merge tag 'v5.4.70' into 5.4-2.1.x-imxAndrey Zhizhikin
This is the 5.4.70 stable release Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
2020-10-07gpio/aspeed-sgpio: enable access to all 80 input & output sgpiosJeremy Kerr
[ Upstream commit ac67b07e268d46eba675a60c37051bb3e59fd201 ] Currently, the aspeed-sgpio driver exposes up to 80 GPIO lines, corresponding to the 80 status bits available in hardware. Each of these lines can be configured as either an input or an output. However, each of these GPIOs is actually an input *and* an output; we actually have 80 inputs plus 80 outputs. This change expands the maximum number of GPIOs to 160; the lower half of this range are the input-only GPIOs, the upper half are the outputs. We fix the GPIO directions to correspond to this mapping. This also fixes a bug when setting GPIOs - we were reading from the input register, making it impossible to set more than one output GPIO. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Fixes: 7db47faae79b ("gpio: aspeed: Add SGPIO driver") Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01Merge tag 'v5.4.69' into 5.4-2.1.x-imxAndrey Zhizhikin
This is the 5.4.69 stable release Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
2020-10-01dt-bindings: sound: wm8994: Correct required supplies based on actual ↵Krzysztof Kozlowski
implementaion [ Upstream commit 8c149b7d75e53be47648742f40fc90d9fc6fa63a ] The required supplies in bindings were actually not matching implementation making the bindings incorrect and misleading. The Linux kernel driver requires all supplies to be present. Also for wlf,wm8994 uses just DBVDD-supply instead of DBVDDn-supply (n: <1,3>). Reported-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200501133534.6706-1-krzk@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-10Merge tag 'v5.4.64' into 5.4-2.1.x-imxAndrey Zhizhikin
This is the 5.4.64 stable release Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
2020-09-09mmc: dt-bindings: Add resets/reset-names for Mediatek MMC bindingsWenbin Mei
commit 65557383191de46611dd3d6b639cbcfbade43c4a upstream. Add description for resets/reset-names. Cc: <stable@vger.kernel.org> # v5.4+ Fixes: 966580ad236e ("mmc: mediatek: add support for MT7622 SoC") Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com> Tested-by: Frank Wunderlich <frank-w@public-files.de> Link: https://lore.kernel.org/r/20200814014346.6496-2-wenbin.mei@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-06Merge tag 'v5.4.63' into 5.4-2.1.x-imxAndrey Zhizhikin
This is the 5.4.63 stable release Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
2020-09-05dt-bindings: mmc: tegra: Add tmclk for Tegra210 and laterSowjanya Komatineni
commit f7f86e8ac0ad7cd6792a80137f5a550924966916 upstream. commit b5a84ecf025a ("mmc: tegra: Add Tegra210 support") Tegra210 and later uses separate SDMMC_LEGACY_TM clock for data timeout. So, this patch adds "tmclk" to Tegra sdhci clock property in the device tree binding. Fixes: b5a84ecf025a ("mmc: tegra: Add Tegra210 support") Cc: stable <stable@vger.kernel.org> # 5.4 Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Link: https://lore.kernel.org/r/1598548861-32373-4-git-send-email-skomatineni@nvidia.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-24Merge tag 'v5.4.60' into 5.4-2.1.x-imxAndrey Zhizhikin
This is the 5.4.60 stable release Conflicts (manual resolve): - drivers/crypto/caam/caamalg.c Keep NXP version, as it already covers the functionality for the upstream patch [d6bbd4eea2439] - drivers/gpu/drm/imx/imx-ldb.c Merge patch [1752ab50e8256] from upstream to disable both LVDS channels when Enoder is disabled Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
2020-08-21dt-bindings: iio: io-channel-mux: Fix compatible string in example codeChristian Eggers
commit add48ba425192c6e04ce70549129cacd01e2a09e upstream. The correct compatible string is "gpio-mux" (see bindings/mux/gpio-mux.txt). Cc: stable@vger.kernel.org # v4.13+ Reviewed-by: Peter Rosin <peda@axentia.se> Signed-off-by: Christian Eggers <ceggers@arri.de> Link: https://lore.kernel.org/r/20200727101605.24384-1-ceggers@arri.de Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-13hwmon: (sht3x) add devicetree supportWojciech Slenska
Signed-off-by: Wojciech Slenska <wojciech.slenska@gmail.com> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Stefan Agner <stefan.agner@toradex.com> (cherry picked from commit 868500c715177280fef9db94ee81229311673857)
2020-08-13can: mcp25xxfd: allow to keep the clock allways onMax Krummenacher
This allows to have a clock on clko even if the controller is disabled. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> (cherry picked from commit 417c1031677a958c5c936c243a83fc933c0cfda3)
2020-08-13dt-binding: can: mcp25xxfd: document device tree bindingsMartin Sperl
Add device-tree bindings for Microcip CanFD Controller mcp2517fd -- Changelog: V1 -> V2: new more generic name based on feedback from microchip cleanup of dt custom properties removing (most) gpio functions V2 -> V3: added vendor-prefix for gpio-opendrain s/_/-/ added gpio-controller V3 -> V4: resend added: Reviewed-by: Rob Herring <robh@kernel.org> V7 -> V8: added support for mcp2518fd added microchip,gpio0-xstandby removed Reviewed-by because of changes Signed-off-by: Martin Sperl <kernel@martin.sperl.org> (cherry picked from commit ca3c427d353bafffa51d38da57e49f61ba16dbbf) (cherry picked from commit 1b9c8b6a5c778c0be58b9877834afa1320b2a0f0)
2020-08-13power: reset: gpio-poweroff: add force-modeOleksandr Suvorov
Property "force-mode" tells the driver to replace previously initialized power-off kernel hook and allows gpio-poweroff to probe and operate successfully in any case. Related-to: #42589 Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> (cherry picked from commit 371447a8663984d8ff090288247805cea3dc4282) Conflicts: Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt drivers/power/reset/gpio-poweroff.c Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2020-08-13dt-bindings: lontium,lt8912: follow code changeMax Krummenacher
The driver got converted to a I2C device, DDC/EDID and HPD handling is added. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> (cherry picked from commit 35be57f246f14c96cbd0889d8bd49f233cd6e731)
2020-08-13Input: colbri-vf50-ts: improve bindings documentationMax Krummenacher
Clarify properties. Drop unused pinctrl-2 state 'gpio'. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> (cherry picked from commit 54095d88b39a02ea674794e49ecd2c711d8a3d09) Conflicts: Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
2020-08-13drm/bridge: Add support for Lontium LT8912Wyon Bi
The Lontium LT8912 MIPI-DSI to LVDS and HDMI/MHL bridge features a single-channel MIPI D-PHY receiver front-end configuration with 4 data lanes per channel operating at 1.5Gbps per data lane and a maximum input bandwidth of 6Gbps. Change-Id: I7733ea5f33094151bb62e62406561cc0025cf900 Signed-off-by: Wyon Bi <bivvy.bi@rock-chips.com> Import and forward port to 4.9 (API change of_get_drm_display_mode() ) from https://github.com/rockchip-linux/kernel/commit/230f7f061036a99fc02d2cd7d20f66f7f0efae99 Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> drop drm_atomic_helper_connector_dpms, see 7d902c05b drm: Nuke drm_atomic_helper_connector_dpms (cherry picked from commit 265fac62bf9defe0de5c1ce088013b61c9b46fb7) (cherry picked from commit 7d2bdcf5aa35191aa0810884ea8eef944059269c) (cherry picked from commit 35243d334a8610385cc3f830f90ab18fd7e7edc5) Conflicts: Documentation/devicetree/bindings/vendor-prefixes.txt drivers/gpu/drm/bridge/Kconfig
2020-08-13usb/misc/usb3503: add setting of 'non removable devices' registerMax Krummenacher
This allows to configure the NRD register from device tree or platform data. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> (cherry picked from commit 92ed1faf672e46e3e54b1f41f0b38f533b53b1aa) (cherry picked from commit 6b5280f4e71770600d5b89638d849896158f2ec3) (cherry picked from commit be31d2bfdc94dafefc28826e7cc06a991218e35b)
2020-08-13usb: misc: usb3503: add the usb3803 variantMax Krummenacher
While the usb3503 variant uses a HSIC connection to upstream, the usb3803 uses a regular USB connection and provides a bypass mode which connects the upstream port with downstream port 3. This adds an additional control gpio to the configuration which allows moving away from the bypass mode to either standby or hub mode once the driver is instantiated. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> (cherry picked from commit e7812f55781bd9453a231d104a2c6c520491e2e4) (cherry picked from commit 8662817b83bee3c30336f104608752fcb652f5c4) (cherry picked from commit a13c0df11735a5964ceec0d72e17226773bcc01f)
2020-08-13Documentation: fix imx7d pinctrl dse config bitsMax Krummenacher
From the i.MX 7 reference manual the drive strenght field is defined as follows: 00 DSE_0_X1 01 DSE_1_X4 10 DSE_2_X2 11 DSE_3_X6 Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> (cherry picked from commit 38524d73583e8f7fc61c8acd57b77c0a29889616) (cherry picked from commit 40cbf50c20489ce6349be776dd67a2522687e43a) Conflicts: Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2020-08-11Merge tag 'v5.4.53' into 5.4-2.1.x-imxAndrey Zhizhikin
This is the 5.4.53 stable release Conflicts (manual resolve, upstream patch merged): drivers/thermal/imx_thermal.c Upstream patch [9025a5589c035a7328c920ed4e190c0c2f5d017d] adds missing of_node_put call, NXP version has been adapted to accommodate this patch into the code. Signed-off-by: Andrey Zhizhikin <andrey.z@gmail.com>
2020-08-11Merge tag 'v5.4.48' into 5.4-2.1.x-imxAndrey Zhizhikin
This is the 5.4.48 stable release Conflicts (manual resolve, upstream taken): drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c Commit d1a00c9bb1 from upstream solves the issue with improper error reporting when qdisc type support is absent. Upstream version is merged into NXP implementation. Signed-off-by: Andrey Zhizhikin <andrey.z@gmail.com>
2020-07-22doc: dt: bindings: usb: dwc3: Update entries for disabling SS instances in ↵Neil Armstrong
park mode [ Upstream commit 3d157c28d2289edf0439e8308e8de3a06acaaf0e ] This patch updates the documentation with the information related to the quirks that needs to be added for disabling all SuperSpeed XHCI instances in park mode. Cc: Dongjin Kim <tobetter@gmail.com> Cc: Jianxin Pan <jianxin.pan@amlogic.com> Cc: Thinh Nguyen <thinhn@synopsys.com> Cc: Jun Li <lijun.kernel@gmail.com> Reported-by: Tim <elatllat@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22dt-bindings: mailbox: zynqmp_ipi: fix unit addressKangmin Park
[ Upstream commit 35b9c0fdb9f666628ecda02b1fc44306933a2d97 ] Fix unit address to match the first address specified in the reg property of the node in example. Signed-off-by: Kangmin Park <l4stpr0gr4m@gmail.com> Link: https://lore.kernel.org/r/20200625135158.5861-1-l4stpr0gr4m@gmail.com Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-07Merge tag 'v5.4.47' into 5.4-2.1.x-imxMax Krummenacher
This is the 5.4.47 stable release All conflicts resolved in favour of HEAD, i.e. 5.4-2.1.x-imx Conflicts: arch/arm/boot/dts/imx6qdl.dtsi arch/arm/mach-imx/Kconfig arch/arm/mach-imx/common.h arch/arm/mach-imx/suspend-imx6.S arch/arm64/boot/dts/freescale/imx8qxp-mek.dts arch/powerpc/include/asm/cacheflush.h drivers/cpufreq/imx6q-cpufreq.c drivers/dma/imx-sdma.c drivers/edac/synopsys_edac.c drivers/firmware/imx/imx-scu.c drivers/net/ethernet/freescale/fec.h drivers/net/ethernet/freescale/fec_main.c drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c drivers/net/phy/phy_device.c drivers/perf/fsl_imx8_ddr_perf.c drivers/usb/cdns3/gadget.c drivers/usb/dwc3/gadget.c include/uapi/linux/dma-buf.h Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2020-06-22dt-bindings: display: mediatek: control dpi pins mode to avoid leakageJitao Shi
[ Upstream commit b0ff9b590733079f7f9453e5976a9dd2630949e3 ] Add property "pinctrl-names" to swap pin mode between gpio and dpi mode. Set the dpi pins to gpio mode and output-low to avoid leakage current when dpi disabled. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27MLK-24176-3 doc: lpspi: New property in document DT bindings for LPSPIClark Wang
Add "fsl,spi-only-use-cs1-sel" to fit i.MX8DXL-EVK. Spi common code does not support use of CS signals discontinuously. It only uses CS1 without using CS0. So, add this property to re-config chipselect value. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Fugang Duan <fugang.duan@nxp.com>
2020-05-16MLK-24050-3 dt-bindings: phy-imx8mq-usb: add phy tuning for imx8mq/pLi Jun
Add USB PHY tuning of imx8mq/p for USB certification, mainly for eye diagram test. Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Li Jun <jun.li@nxp.com>
2020-04-23arm64: tegra: Fix Tegra194 PCIe compatible stringJon Hunter
[ Upstream commit f9f711efd441ad0d22874be49986d92121862335 ] If the kernel configuration option CONFIG_PCIE_DW_PLAT_HOST is enabled then this can cause the kernel to incorrectly probe the generic designware PCIe platform driver instead of the Tegra194 designware PCIe driver. This causes a boot failure on Tegra194 because the necessary configuration to access the hardware is not performed. The order in which the compatible strings are populated in Device-Tree is not relevant in this case, because the kernel will attempt to probe the device as soon as a driver is loaded and if the generic designware PCIe driver is loaded first, then this driver will be probed first. Therefore, to fix this problem, remove the "snps,dw-pcie" string from the compatible string as we never want this driver to be probe on Tegra194. Fixes: 2602c32f15e7 ("arm64: tegra: Add P2U and PCIe controller nodes to Tegra194 DT") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-22MLK-23674-2 doc: SECO MU driver binding for cmd and rsp tagsStéphane Dion
The V2X MU requires that the the sender changes the byte indication the type of the message in its header. The value required changes for each MU. This patch adds the documentation of this functionality adding explanations for fsl,cmd_tag and fsl,rsp_tag. Signed-off-by: Stéphane Dion <stephane.dion_1@nxp.com>
2020-04-10LF-1189-4 dt-bindings: display: fsl-imx-drm: Add LCDIF mux display docLiu Ying
DPU found in i.MX8qxp SoC may drive a parallel display through pixel link to LCDIF mux. This patch adds the device tree binding documentation for LCDIF mux display. Reviewed-by: Robert Chiras <robert.chiras@nxp.com> Tested-by: Robert Chiras <robert.chiras@nxp.com> Signed-off-by: Liu Ying <victor.liu@nxp.com>
2020-04-09MLK-23754-4 dt-bindings: remoteproc: imx-rproc: support i.MX[8, 8M, 7ULP]Peng Fan
Support i.MX8/8M/7ULP: - Introduce early-booted property for M4 booted before Linux - Introduce mboxes for rpmsg/virtio to communicate with M4 - Introduce mub-partition for hardware partition supported by i.MX8 - Introduce rsrc-table which hold the resource table - Introduce rsrc-da Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-04-09MLK-23754-3 dt-bindings: remoteproc: Convert imx-rproc to json-schemaPeng Fan
Convert the i.MX remoteproc binding to DT schema format using json-schema Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-04-01dt-bindings: net: FMan erratum A050385Madalin Bucur
[ Upstream commit 26d5bb9e4c4b541c475751e015072eb2cbf70d15 ] FMAN DMA read or writes under heavy traffic load may cause FMAN internal resource leak; thus stopping further packet processing. The FMAN internal queue can overflow when FMAN splits single read or write transactions into multiple smaller transactions such that more than 17 AXI transactions are in flight from FMAN to interconnect. When the FMAN internal queue overflows, it can stall further packet processing. The issue can occur with any one of the following three conditions: 1. FMAN AXI transaction crosses 4K address boundary (Errata A010022) 2. FMAN DMA address for an AXI transaction is not 16 byte aligned, i.e. the last 4 bits of an address are non-zero 3. Scatter Gather (SG) frames have more than one SG buffer in the SG list and any one of the buffers, except the last buffer in the SG list has data size that is not a multiple of 16 bytes, i.e., other than 16, 32, 48, 64, etc. With any one of the above three conditions present, there is likelihood of stalled FMAN packet processing, especially under stress with multiple ports injecting line-rate traffic. To avoid situations that stall FMAN packet processing, all of the above three conditions must be avoided; therefore, configure the system with the following rules: 1. Frame buffers must not span a 4KB address boundary, unless the frame start address is 256 byte aligned 2. All FMAN DMA start addresses (for example, BMAN buffer address, FD[address] + FD[offset]) are 16B aligned 3. SG table and buffer addresses are 16B aligned and the size of SG buffers are multiple of 16 bytes, except for the last SG buffer that can be of any size. Additional workaround notes: - Address alignment of 64 bytes is recommended for maximally efficient system bus transactions (although 16 byte alignment is sufficient to avoid the stall condition) - To support frame sizes that are larger than 4K bytes, there are two options: 1. Large single buffer frames that span a 4KB page boundary can be converted into SG frames to avoid transaction splits at the 4KB boundary, 2. Align the large single buffer to 256B address boundaries, ensure that the frame address plus offset is 256B aligned. - If software generated SG frames have buffers that are unaligned and with random non-multiple of 16 byte lengths, before transmitting such frames via FMAN, frames will need to be copied into a new single buffer or multiple buffer SG frame that is compliant with the three rules listed above. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-31MLK-23412-10 usb: dwc3: imx8mp: update binding doc to add one clockLi Jun
For dwc3-imx8mp, the clock for its power domain hsiomix has to be handled by user, so add the hsio root clock to dwc3 imx8mp binding doc. Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Li Jun <jun.li@nxp.com>
2020-03-30MLK-23693-4: dt-bindings: mtd: rawnand: gpmi: document max cs board supportsHan Xu
Document newly supported device tree properties max-cs to specify the maximum cs the board supports. Signed-off-by: Han Xu <han.xu@nxp.com>
2020-03-26MLK-23671-01 soc: imx: Add the rpm always on flag if necessaryJacky Bai
Some power domain need to be runtime always on to keep the peripherals's weekup ability, for such power domain, add the 'GENPD_FLAG_RPM_ALWAYS_ON' flag. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Anson Huang <Anson.Huang@nxp.com>
2020-03-18MLK-23616-1 dt-bindings: imx8mp-lvds-phy: Add APB clock relevant propertiesLiu Ying
The phy registers are accessible after APB clock is enabled. So, add the relevant clock properties in device tree doc. Reviewed-by: Sandor Yu <Sandor.yu@nxp.com> Signed-off-by: Liu Ying <victor.liu@nxp.com>
2020-03-18MLK-23622-01 soc: imx: Add active wakeup flag for domain with active-wakeup ↵Jacky Bai
property Add the active wakeup flag if a power domain has such requirement. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Anson Huang <Anson.Huang@nxp.com>
2020-03-13SSI-87: dt-bindings: firmware: imx: secvio: Add imx-secvio-sc bindingFranck LENORMAND
Add the documentation for fsl,imx-secvio-sc binding. Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
2020-03-12MLK-23421: doc: update SECO MU driver binding for fast IPCFranck LENORMAND
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
2020-03-12MLK-23421: dt-bindings: mailbox: imx-mu: add SECO MU supportFranck LENORMAND
i.MX8/8X SECO MU is dedicated for communication between kernel and SECO. To use SECO MU more effectivly, add "fsl,imx8-seco-mu" compatible to support fast IPC. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
2020-03-08Merge tag 'v5.4.24' into imx_5.4.yJason Liu
Merge Linux stable release v5.4.24 into imx_5.4.y * tag 'v5.4.24': (3306 commits) Linux 5.4.24 blktrace: Protect q->blk_trace with RCU kvm: nVMX: VMWRITE checks unsupported field before read-only field ... Signed-off-by: Jason Liu <jason.hui.liu@nxp.com> Conflicts: arch/arm/boot/dts/imx6sll-evk.dts arch/arm/boot/dts/imx7ulp.dtsi arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi drivers/clk/imx/clk-composite-8m.c drivers/gpio/gpio-mxc.c drivers/irqchip/Kconfig drivers/mmc/host/sdhci-of-esdhc.c drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c drivers/net/can/flexcan.c drivers/net/ethernet/freescale/dpaa/dpaa_eth.c drivers/net/ethernet/mscc/ocelot.c drivers/net/ethernet/stmicro/stmmac/stmmac_main.c drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c drivers/net/phy/realtek.c drivers/pci/controller/mobiveil/pcie-mobiveil-host.c drivers/perf/fsl_imx8_ddr_perf.c drivers/tee/optee/shm_pool.c drivers/usb/cdns3/gadget.c kernel/sched/cpufreq.c net/core/xdp.c sound/soc/fsl/fsl_esai.c sound/soc/fsl/fsl_sai.c sound/soc/sof/core.c sound/soc/sof/imx/Kconfig sound/soc/sof/loader.c
2020-03-04MLK-23418-4 perf/imx_ddr: Add driver support for i.MX8DXL DB PerfJoakim Zhang
Add driver support for i.MX8DXL DB Perf, which supports AXI ID PORT CHANNEL filter. Reviewed-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
2020-03-04MLK-23417-3 perf/imx_ddr: Add driver support for i.MX8DXL DDR PerfJoakim Zhang
Add driver support for i.MX8DXL DDR Perf, which supports AXI ID PORT CHANNEL filter. Reviewed-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
2020-02-26LF-842-2: dt-bindings: display/bridge: nwl-dsi: Document video_pll clockRobert Chiras
Add documentation for a new clock 'phy_parent'. This clock is optional and is used to re-parent the PHY related clocks (phy_ref, tx_esc and rx_esc) to a valid parent. This clock is needed, in order to make the re-parenting in driver, since the default re-parenting in dts node (using assigned-clock-parents) may break the LVDS block, which has it's PHY shared with MIPI-DSI. Signed-off-by: Robert Chiras <robert.chiras@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> (cherry picked from commit 7ed3b8738e3103396a5f3a9268c66f11f78cab03)
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-04 07:10:35 +0000