| Age | Commit message (Collapse) | Author |
|---|
|
Linux 6.17-rc3
|
|
Add an #io-channel-cells property to the Marvell 88PM886 PMIC binding to
allow referencing the IO channels exposed by its GPADC.
Acked-by: Karel Balej <balejk@matfyz.cz> # for the PMIC
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add a bullet point for "sinc4+rej60" filter_type that is used in the
ad7124 driver.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add new filter type to the sysfs-bus-iio ABI documentation:
- "sinc4+lp" for Sinc4 + Low Pass Filter
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add documentation for ade9000 driver which describes the driver
device files and shows how the user may use the ABI for various
scenarios (configuration, measurement, etc.).
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add devicetree bindings support for ade9000.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add new IIO modifiers to support power and energy measurement devices:
Power modifiers:
- IIO_MOD_ACTIVE: Real power consumed by the load
- IIO_MOD_REACTIVE: Power that oscillates between source and load
- IIO_MOD_APPARENT: Magnitude of complex power
Signal quality modifiers:
- IIO_MOD_RMS: Root Mean Square value
Additionally adds:
- IIO_CHAN_INFO_POWERFACTOR: Power factor channel info type for
representing the ratio of active power to apparent power
These modifiers enable proper representation of power measurement
devices like energy meters and power analyzers.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
bindings
The NetCube Systems Nagami is an System on Module base on the Allwinner
T113s SoC. It is intended to be used in low cost devices which require
simple layouts and low BOM cost.
The NetCube Systems Nagami Basic Carrier Board is a simple carrier for the
Nagami SoM. It is intended to serve as a simple reference design for a
custom implementation or just evaluating the module with other peripherals
The NetCube Systems Nagami Keypad Carrier is a custom board intended to
fit a standard Ritto Intercom enclosure and provides a Keypad, NFC-Reader
and Status-LED all controllable over Ethernet with PoE support.
Signed-off-by: Lukas Schmid <lukas.schmid@netcube.li>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250831162536.2380589-2-lukas.schmid@netcube.li
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
There are four clock controllers in the A523 SoC. The existing binding
already covers two of them that are critical for basic operation. The
remaining ones are the MCU clock controller and CPU PLL clock
controller.
Add a description for the MCU CCU. This unit controls and provides
clocks to the MCU (RISC-V) subsystem and peripherals meant to operate
under low power conditions.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250911174710.3149589-3-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The brcm,bcm7445-switch-v4.0.txt binding is already covered by
dsa/brcm,sf2.yaml. The listed deprecated properties aren't used anywhere
either.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250909142339.3219200-2-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add compatible for Tegra256 I2C controllers. Tegra256 consists of
8 generic Tegra I2C controllers similar to previous generations.
The parent clock frequency is different in these controllers and
hence the timing parameter values are different from the previous
ones.
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
After discussion with the devicetree maintainers we agreed to not extend
lists with the generic compatible "apple,i2c" anymore [1]. Use
"apple,t8103-i2c" as fallback compatible as it is the SoC the driver
and bindings were written for.
This block is compatible with t8103, so just add the new per-SoC
compatible using apple,t8103-i2c as base.
[1]: https://lore.kernel.org/asahi/12ab93b7-1fc2-4ce0-926e-c8141cfe81bf@kernel.org/
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Add samsung,exynos990-hsi2c dedicated compatible for
representing I2C of Exynos990 SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Denzeel Oliva <wachiturroxd150@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Add the sa8775p CCI device string compatible.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Wenmeng Liu <quic_wenmliu@qualcomm.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
The CCI on QCM2290 is the interface for controlling camera sensor over I2C.
It requires only two clocks.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Use attack vector controls to select whether VMSCAPE requires mitigation,
similar to other bugs.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
Extend the Renesas WDT device tree bindings to support the watchdog timer
found on the RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs.
The RZ/T2H WDT is mostly compatible with the one found on the RZ/V2H(P),
but includes an additional register and differs in the clock division
ratio settings for the WDTCR[CKS] field. To reflect these differences,
introduce a new compatible string, "renesas,r9a09g077-wdt".
The binding schema is updated accordingly. On RZ/T2H, the WDT does not
require the "resets" property. It also requires two register regions and
the presence of a "power-domains" property. The "clock-names" property is
limited to a single entry, "pclk", for this SoC.
The RZ/N2H SoC uses the same WDT IP as the RZ/T2H. It is supported by
using "renesas,r9a09g087-wdt" as the primary compatible string, with
"renesas,r9a09g077-wdt" listed as a fallback to describe the shared
hardware features.
Example:
wdt0: watchdog@80082000 {
compatible = "renesas,r9a09g077-wdt";
reg = <0 0x80082000 0 0x400>,
<0 0x81295100 0 0x04>;
clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>;
clock-names = "pclk";
power-domains = <&cpg>;
status = "disabled";
};
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Pins associated with the 8250 omap unit can be the source of a wakeup in
deep sleep states. To be able to wakeup, these pins have to be
configured in a special way. To support this configuration add the
default and wakeup pinctrl states.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Kendall Willis <k-willis@ti.com>
Link: https://lore.kernel.org/r/20250910-uart-daisy-chain-8250-omap-v2-1-e90d44c1a9ac@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document support for Airoha AN8855 Switch EFUSE used to calibrate
internal PHYs and store additional configuration info.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250912131415.303407-5-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Kontron SMARC-sAM67 has the same nvmem layout as the SMARC-sAL28. To
To be prepared for any board specific quirks, add a specific compatible.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250912131415.303407-4-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add bindings to expose the On Chip One-Time Programmable Controller
(OCOTP) for the NXP s32g chipset. There are three versions of this
chip but they're compatible so we can fall back to the nxp,s32g2-ocotp
compatible.
Signed-off-by: Ciprian Costea <ciprianmarian.costea@nxp.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250912131415.303407-2-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are some products which support GDSP remoteprocs. GDSP is General
Purpose DSP where tasks can be offloaded. There are 2 GDSPs named gdsp0
and gdsp1. Add "gdsp0" and "gdsp1" as the new supported labels for GDSP
fastrpc domains.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Ling Xu <quic_lxu5@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250912131302.303199-2-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Qcom Slimbus controller driver is totally unused and dead code, there is
no point in keeping this driver in the kernel without users.
This patch removes the driver along with device tree bindings.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250912131202.303026-2-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document compatible for RIPE Atlas Probe v5.
Signed-off-by: Tomáš Macholda <tomas.macholda@nic.cz>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Introduce a new optional device tree property max-sd-hs-hz to
limit the maximum frequency (in Hz) used for SD cards operating in
High-Speed (HS) mode due to any board electrical limitations.
Signed-off-by: Sarthak Garg <quic_sartgarg@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add the MSM SDHCI compatible name to support both eMMC and SD card for
Lemans, which uses 'sa8775p' as the fallback SoC. Ensure the new
compatible string matches existing Lemans-compatible formats without
introducing a new naming convention.
The SDHCI controller on Lemans is based on MSM SDHCI v5 IP. Hence,
document the compatible with "qcom,sdhci-msm-v5" as the fallback.
Signed-off-by: Monish Chunara <quic_mchunara@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wasim Nazir <wasim.nazir@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Some older boards only require a default pinctrl. Add a minItems
property so these don't cause dt-validate warnings.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202509030625.PBgLIAwG-lkp@intel.com/
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel
Samsung pinctrl drivers changes for v6.18
1. Add pin controller drivers for new Axis ARTPEC-8 SoC. The SoC shares
all main blocks, including the pin controller, with Samsung SoC, so
same drivers and bindings are used.
2. Drop remaining support for Samsung S3C2410 SoC pin controllers. The
actual SoC support was removed in January 2023, so this is just
remaining cleanup.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add interconnect dt-bindings and driver support for
Qualcomm's next gen compute SoC - Glymur.
* icc-glymur
dt-bindings: interconnect: document the RPMh Network-On-Chip interconnect in Glymur SoC
interconnect: qcom: icc-rpmh: increase MAX_PORTS to support four QoS ports
interconnect: qcom: add glymur interconnect provider driver
Link: https://lore.kernel.org/r/20250814-glymur-icc-v2-0-596cca6b6015@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add Operation State Manager (OSM) L3 interconnect provider binding for
QCS615 SoC. As the OSM hardware in QCS615 and SM8150 are same,
added a family-level compatible for SM8150 SoC.
Signed-off-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250819-talos-l3-icc-v3-1-04529e85dac7@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add devicetree bindings for Variscite VAR-SOM-AM62P System on Module
and its carrier boards.
Signed-off-by: Stefano Radaelli <stefano.radaelli21@gmail.com>
Reviewed-by: Judith Mendez <jm@ti.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250909213749.28098-2-stefano.radaelli21@gmail.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The AM6254atl SiP belongs to the K3 Multicore SoC architecture platform,
providing AM625 SoC with 512MiB of integrated DDR in the package.
For further information about the package check:
https://www.ti.com/lit/ds/symlink/am625sip.pdf
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250814134531.2743874-3-anshuld@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.18:
UAPI Changes:
- Provide 'boot_display' attribute on boot-up devices
amdxdma:
- Add ioctl DRM_IOCTL_AMDXDNA_GET_ARRAY
Cross-subsystem Changes:
bindings:
- Add Mayqueen vendor prefix mayqueen-
pci:
- vgaarb: Use screen_info helpers
Core Changes:
ttm:
- Add interface to populate buffers
Driver Changes:
amdgpu:
- Pre-populate exported buffers
ast:
- Clean up detection of DRAM config
bochs:
- Clean up
bridge:
- adv7511: Write full Audio infoframe
- ite6263: Support vendor-specific infoframes
- simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings
- Clean up
gma500:
- Clean up
nouveau:
- Pre-populate exported buffers
panel:
- edp: Add support for additonal mt8189 Chromebook panels
- lvds: Add DT bindings for EDT ETML0700Z8DHA
- Clean up
pixpaper:
- Add support for Mayqueen Pixpaper plus DT bindings
rcar-du:
- Use RUNTIME_PM_OPS
- Add support for DSI commands
vkms:
- Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
- Spport YUV with 16-bit components
xe:
- Pre-populate exported buffers
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250911091737.GA39831@linux.fritz.box
|
|
Convert the APM XGene MDIO bus binding to DT schema format. It's a
straight-forward conversion.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250908231016.2070305-2-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert the APM XGene Ethernet binding to DT schema format.
Add the missing apm,xgene2-sgenet and apm,xgene2-xgenet compatibles.
Drop "reg-names" as required. Add support for up to 16 interrupts.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250908231016.2070305-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.17-rc6).
Conflicts:
net/netfilter/nft_set_pipapo.c
net/netfilter/nft_set_pipapo_avx2.c
c4eaca2e1052 ("netfilter: nft_set_pipapo: don't check genbit from packetpath lookups")
84c1da7b38d9 ("netfilter: nft_set_pipapo: use avx2 algorithm for insertions too")
Only trivial adjacent changes (in a doc and a Makefile).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge series from Xianwei Zhao <xianwei.zhao@amlogic.com>:
This Flash Controller is derived by adding an SPI path to the original
raw NAND controller. This controller supports two modes: raw mode and
SPI mode. The raw mode has already been implemented in the community
(drivers/mtd/nand/raw/meson_nand.c).
This submission supports the SPI mode.
Add the drivers and bindings corresponding to the SPI Flash Controller.
|
|
Convert the DMA debug infrastructure from page-based to physical address-based
mapping as a preparation to rely on physical address for DMA mapping routines.
The refactoring renames debug_dma_map_page() to debug_dma_map_phys() and
changes its signature to accept a phys_addr_t parameter instead of struct page
and offset. Similarly, debug_dma_unmap_page() becomes debug_dma_unmap_phys().
A new dma_debug_phy type is introduced to distinguish physical address mappings
from other debug entry types. All callers throughout the codebase are updated
to pass physical addresses directly, eliminating the need for page-to-physical
conversion in the debug layer.
This refactoring eliminates the need to convert between page pointers and
physical addresses in the debug layer, making the code more efficient and
consistent with the DMA mapping API's physical address focus.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
[mszyprow: added a fixup]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/56d1a6769b68dfcbf8b26a75a7329aeb8e3c3b6a.1757423202.git.leonro@nvidia.com
Link: https://lore.kernel.org/all/20250910052618.GH341237@unreal/
|
|
This patch introduces the DMA_ATTR_MMIO attribute to mark DMA buffers
that reside in memory-mapped I/O (MMIO) regions, such as device BARs
exposed through the host bridge, which are accessible for peer-to-peer
(P2P) DMA.
This attribute is especially useful for exporting device memory to other
devices for DMA without CPU involvement, and avoids unnecessary or
potentially detrimental CPU cache maintenance calls.
DMA_ATTR_MMIO is supposed to provide dma_map_resource() functionality
without need to call to special function and perform branching when
processing generic containers like bio_vec by the callers.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/6f058ec395c5348014860dbc2eed348c17975843.1757423202.git.leonro@nvidia.com
|
|
Document the compatible values for the Renesas R-Car X5H (R8A78000) SoC,
as used on the Renesas Ironhide board.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/87ms73vzen.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add a compatible for ASUS Eee Pad Transformer TF101G and ASUS Eee Pad
Slider SL101.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add a compatible for the Xiaomi Mi Pad (A0101) tablet.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The avdd-dsi-csi-supply is CSI power supply, it has nothing to do with
VI, like same supply is used with DSI and has nothing to do with DC.
Move it to correct place.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN, netfilter and wireless.
We have an IPv6 routing regression with the relevant fix still a WiP.
This includes a last-minute revert to avoid more problems.
Current release - new code bugs:
- wifi: nl80211: completely disable per-link stats for now
Previous releases - regressions:
- dev_ioctl: take ops lock in hwtstamp lower paths
- netfilter:
- fix spurious set lookup failures
- fix lockdep splat due to missing annotation
- genetlink: fix genl_bind() invoking bind() after -EPERM
- phy: transfer phy_config_inband() locking responsibility to phylink
- can: xilinx_can: fix use-after-free of transmitted SKB
- hsr: fix lock warnings
- eth:
- igb: fix NULL pointer dereference in ethtool loopback test
- i40e: fix Jumbo Frame support after iPXE boot
- macsec: sync features on RTM_NEWLINK
Previous releases - always broken:
- tunnels: reset the GSO metadata before reusing the skb
- mptcp: make sync_socket_options propagate SOCK_KEEPOPEN
- can: j1939: implement NETDEV_UNREGISTER notification hanidler
- wifi: ath12k: fix WMI TLV header misalignment"
* tag 'net-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
Revert "net: usb: asix: ax88772: drop phylink use in PM to avoid MDIO runtime PM wakeups"
hsr: hold rcu and dev lock for hsr_get_port_ndev
hsr: use hsr_for_each_port_rtnl in hsr_port_get_hsr
hsr: use rtnl lock when iterating over ports
wifi: nl80211: completely disable per-link stats for now
net: usb: asix: ax88772: drop phylink use in PM to avoid MDIO runtime PM wakeups
net: ethtool: fix wrong type used in struct kernel_ethtool_ts_info
MAINTAINERS: add Phil as netfilter reviewer
netfilter: nf_tables: restart set lookup on base_seq change
netfilter: nf_tables: make nft_set_do_lookup available unconditionally
netfilter: nf_tables: place base_seq in struct net
netfilter: nft_set_rbtree: continue traversal if element is inactive
netfilter: nft_set_pipapo: don't check genbit from packetpath lookups
netfilter: nft_set_bitmap: fix lockdep splat due to missing annotation
can: rcar_can: rcar_can_resume(): fix s2ram with PSCI
can: xilinx_can: xcan_write_frame(): fix use-after-free of transmitted SKB
can: j1939: j1939_local_ecu_get(): undo increment when j1939_local_ecu_get() fails
can: j1939: j1939_sk_bind(): call j1939_priv_put() immediately when j1939_local_ecu_get() failed
can: j1939: implement NETDEV_UNREGISTER notification handler
selftests: can: enable CONFIG_CAN_VCAN as a module
...
|
|
Tegra264 has 17 generic I2C controllers, two of which are in always-on
partition of the SoC. In addition to the features supported by Tegra194
it also supports a SW mutex register to allow sharing the same I2C
instance across multiple firmware.
Document compatible string "nvidia,tegra264-i2c" for Tegra264 I2C.
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Document the Texas instruments BQ25703A series of charger managers/
buck/boost regulators.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250904160530.66178-2-macroalpha82@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The gt24c256c is another 24c256 compatible EEPROM, and does not
follow the generic name matching, so add a separate compatible for it.
This ensures accurate device-tree representation and enables proper
kernel support for systems using this part.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wasim Nazir <wasim.nazir@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250908-lemans-evk-bu-v4-5-5c319c696a7d@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The SPDIF receiver/transmitter can be connected to a DAI device via OF
graph port. It is already in use and supported.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250910233615.775397-2-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Texas Instruments PCM1754 is a simple stereo DAC without any digital
management interface but soft mute, PCM input format and 44.1 kHz
digital de-emphasis can be configured via strapping pins. Only soft mute
and PCM input format selection is currently exposed via optional GPIOs
in the driver.
Signed-off-by: Stefan Kerkmann <s.kerkmann@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250910-v6-12-topic-pcm1754-v2-1-0917dbe73c65@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1 into char-misc-next
Krzysztof writes:
1-Wire bus drivers for v6.18
1. Correct missing interrupts in IMX 1-Wire Devicetree bindings.
2. Drop old, dead code from Matrox driver.
* tag 'w1-drv-6.18' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1:
w1: matrox: Remove some deadcode in matrox_w1_remove()
dt-bindings: w1: imx: Add an entry for the interrupts property
|
