Age | Commit message (Collapse) | Author |
|
Add hs400 support for usdhc3 and add sd3.0 support for usdhc2.
Signed-off-by: Haibo Chen <haibo.chen@freescale.com>
|
|
enable pcie support on imx7d platforms.
Signed-off-by: Richard Zhu <Richard.Zhu@freescale.com>
|
|
Enable uart3 for bt in lpsr mode.
Signed-off-by: Fugang Duan <B38611@freescale.com>
|
|
add mqs sound card support
Signed-off-by: Zidan Wang <zidan.wang@freescale.com>
|
|
add sai<->WM8958 sound card support
Signed-off-by: Zidan Wang <zidan.wang@freescale.com>
|
|
Add mipi dsi dts support for imx7d-12x12-lpddr3-arm2 board.
Signed-off-by: Fancy Fang <chen.fang@freescale.com>
|
|
- Add iomuxc lpsr pad settings, move pinctrl_usbotg1_vbus and
pinctrl_usbotg2_vbus to iomuxc lpsr domain.
Signed-off-by: Adrian Alonso <aalonso@freescale.com>
|
|
Add uart3 node and BT reg on pin config.
Signed-off-by: Fugang Duan <B38611@freescale.com>
(cherry picked from commit: 76a0d0595a15346ec954c14e0d4f777d218c0b15)
|
|
Enable fec1 and fec2 for lpsr mode.
Signed-off-by: Fugang Duan <B38611@freescale.com>
(cherry picked from commit: 1fe7e098efc52abecdd3cf4a2ed8add5582393dc)
|
|
Enable epxp in device node by default on imx7d-12x12-lpddr3-arm2
board.
Signed-off-by: Fancy Fang <chen.fang@freescale.com>
|
|
Add dts support for sim1 on imx_4.1.y branch.
Signed-off-by: Gao Pan <b54642@freescale.com>
|
|
To achieve low power, debug uart clk should be from OSC, so that
it does NOT need to keep PLL on, especially for low power idle
case.
Signed-off-by: Anson Huang <b20788@freescale.com>
|
|
Enable ecspi dtb for imx7d-12x12-lpddr3-arm2 board.
Signed-off-by: Robin Gong <b38343@freescale.com>
|
|
Correct "cpu0" node in alphabetical sequence.
Signed-off-by: Robin Gong <b38343@freescale.com>
|
|
Add dts support for pxp-v4l2-output module for
imx7d-12x12-lpddr3 board.
Signed-off-by: Fancy Fang <chen.fang@freescale.com>
|
|
device tree
cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios
should be changed to GPIO_ACTIVE_HIGH.
Otherwise, the SD may not work properly due to wrong polarity inversion
specified in DT after switch to common parsing function mmc_of_parse().
Signed-off-by: Haibo Chen <haibo.chen@freescale.com>
|
|
Correct the lcdif pinctrl settings to make it work
correctly.
Signed-off-by: Fancy Fang <chen.fang@freescale.com>
|
|
Disable all otg features for otg1 port of imx7d-12x12-lpddr3-arm2 board, then
the otg port can only do role swtich by ID pin state.
Signed-off-by: Li Jun <jun.li@freescale.com>
(cherry picked from commit 8d19fb5979522032cf4d96909d609aceac0dde85)
|
|
Enable usbotg1 and usbotg2
Signed-off-by: Peter Chen <peter.chen@freescale.com>
|
|
Add operating-points, clks and regulators property used in DVFS
Signed-off-by: Bai Ping <b51503@freescale.com>
(cherry picked from commit f13001e89f5b64750735fd190a8316d8ee800d36)
|
|
Add dts support for pwm backlight on imx_4.1.y branch.
Signed-off-by: Fancy Fang <chen.fang@freescale.com>
|
|
Add dts support for lcdif on imx_4.1.y branch.
Signed-off-by: Fancy Fang <chen.fang@freescale.com>
|
|
Add enet1, enet2, i2c1~4, max7322 support.
Signed-off-by: Fugang Duan <B38611@freescale.com>
|
|
Add i.MX7D 12x12 LPDDR3 ARM2 board and SabreSD board
dtb support.
Signed-off-by: Anson Huang <b20788@freescale.com>
|