summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)Author
2015-09-21ARM: dts: rockchip: fix rk3288 watchdog irqHeiko Stuebner
commit 1a1b698b115467242303daf5fe1d3c9886c2fa17 upstream. The watchdog irq is actually SPI 79, which translates to the original 111 in the manual where the SPI irqs start at 32. The current dw_wdt driver does not use the irq at all, so this issue never surfaced. Nevertheless fix this for a time we want to use the irq. Fixes: 2ab557b72d46 ("ARM: dts: rockchip: add core rk3288 dtsi") Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-21ARM: dts: fix clock-frequency of display timing0 for exynos3250-rinatoHyungwon Hwang
commit 65e3293381e1cf1abcfe1aa22b914650a40e3af4 upstream. After the commit abc0b1447d49 ("drm: Perform basic sanity checks on probed modes"), proper clock-frequency becomes mandatory for validating the mode of panel. The display does not work if there is no mode validated. Also, this clock-frequency must be set appropriately for getting required frame rate. Fixes: abc0b1447d49 ("drm: Perform basic sanity checks on probed modes") Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Sigend-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-13ARM: dts: OMAP5: Fix broken pbias device creationKishon Vijay Abraham I
commit 70caac3f25291cf715cf8f2d8c7db46f6cbefe7c upstream. commit <ed8509edddeb> ("ARM: dts: omap5: add minimal l4 bus layout with control module support") moved pbias_regulator dt node from being a child node of ocp to be the child node of omap5_padconf_global. After this device for pbias_regulator is not created. Fix it by adding "simple-bus" compatible property to omap5_padconf_global dt node. Fixes: ed8509edddeb ("ARM: dts: omap5: add minimal l4 bus layout with control module support") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-13ARM: dts: OMAP4: Fix broken pbias device creationKishon Vijay Abraham I
commit 89a898df87e114952191ab0e061aa18e3c617880 upstream. commit <7415b0b4c645> ("ARM: dts: omap4: add minimal l4 bus layout with control module support") moved pbias_regulator dt node from being a child node of ocp to be the child node of omap4_padconf_global. After this device for pbias_regulator is not created. Fix it by adding "simple-bus" compatible property to omap4_padconf_global dt node. Fixes: 7415b0b4c645 ("ARM: dts: omap4: add minimal l4 bus layout with control module support") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-13ARM: dts: dra7: Fix broken pbias device creationKishon Vijay Abraham I
commit cd4556733b30cc363adc7b1cea3bffa7e2dd0c7c upstream. commit <d919501feffa> ("ARM: dts: dra7: add minimal l4 bus layout with control module support") moved pbias_regulator dt node from being a child node of ocp to be the child node of scm_conf. After this device for pbias_regulator is not created. Fix it by adding "simple-bus" compatible property to scm_conf dt node. Fixes: d919501feffa ("ARM: dts: dra7: add minimal l4 bus layout with control module support") Suggested-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Tested-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-13ARM: dts: omap243x: Fix broken pbias device creationKishon Vijay Abraham I
commit 4317c8c9121e4685561422ac267b292df8e80806 upstream. commit <72b10ac00eb1> ("ARM: dts: omap24xx: add minimal l4 bus layout with control module support") moved pbias_regulator dt node from being a child node of ocp to be the child node of scm_conf. After this device for pbias_regulator is not created. Fix it by adding "simple-bus" compatible property to scm_conf dt node. Fixes: 72b10ac00eb1 ("ARM: dts: omap24xx: add minimal l4 bus layout with control module support") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-13ARM: imx6: correct i.MX6 PCIe interrupt routingLucas Stach
commit 1a9fa190956f45c1e58c4d8bfa5ac051691ea590 upstream. The PCIe interrupts are also routed through the GPC. This has been missed from the conversion to stacked IRQ domains as the PCIe controller uses an explicit interrupt map and thus doesn't inherit the SoC global interrupt parent. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-16ARM: dts: i.MX35: Fix can support.Denis Carikli
commit e053f96b1a00022b4e2c7ceb7ac0229646626507 upstream. Since commit 3d42a379b6fa5b46058e3302b1802b29f64865bb ("can: flexcan: add 2nd clock to support imx53 and newer") the can driver requires a dt nodes to have a second clock. Add them to imx35 to fix probing the flex can driver on the respective platforms. Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-16ARM: dts: keystone: fix dt bindings to use post div register for mainpllMurali Karicheri
commit c1bfa985ded82cacdfc6403e78f329c44e35534a upstream. All of the keystone devices have a separate register to hold post divider value for main pll clock. Currently the fixed-postdiv value used for k2hk/l/e SoCs works by sheer luck as u-boot happens to use a value of 2 for this. Now that we have fixed this in the pll clock driver change the dt bindings for the same. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-10ARM: dts: am57xx-beagle-x15: Provide supply for usb2_phy2Roger Quadros
commit 9ab402aed38b95d9ce453108622be0fc6f167568 upstream. Without this USB2 breaks if USB1 is disabled or USB1 initializes after USB2 e.g. due to deferred probing. Fixes: 5a0f93c6576a ("ARM: dts: Add am57xx-beagle-x15") Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-10ARM: dts: dra7x-evm: Prevent glitch on DCAN1 pinmuxRoger Quadros
commit 2acb5c301edf39ab6d066687ce70da1166e4de9e upstream. Driver core sets "default" pinmux on on probe and CAN driver sets "sleep" pinmux during register. This causes a small window where the CAN pins are in "default" state with the DCAN module being disabled. Change the "default" state to be like sleep so this glitch is avoided. Add a new "active" state that is used by the driver when CAN is actually active. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03ARM: dts: mx23: fix iio-hwmon supportStefan Wahren
commit e8e94ed6285428ab780cd7b0df4622f71eceb39e upstream. In order to get iio-hwmon support, the lradc must be declared as an iio provider. So fix this issue by adding the #io-channel-cells property. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: bd798f9c7b30 ("ARM: dts: mxs: Add iio-hwmon to mx23 soc") Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03ARM: at91/dt: update udc compatible stringsBoris Brezillon
commit 6540165cf41655810ee67b78f01537af022a636a upstream. at91sam9g45, at91sam9x5 and sama5 SoCs should not use "atmel,at91sam9rl-udc" for their USB device compatible property since this compatible is attached to a specific hardware bug fix. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Bo Shen <voice.shen@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03ARM: at91/dt: sama5d4: fix dma conf for aes, sha and tdes nodesludovic.desroches@atmel.com
commit aabbe8f1a561dd8318e693830d9ae377c9a04d2b upstream. The xdmac channel configuration is done in one cell not two. This error prevents from probing devices correctly. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Fixes: 83906783b766 ("ARM: at91/dt: sama5d4: add aes, sha and tdes nodes") Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03ARM: at91/dt: sama5d4ek: mci0 uses slot 0Ludovic Desroches
commit ea25525ce0d195724fead07fe6562fe478a3bf6f upstream. Mci0 uses slot 0 not 1. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Fixes: 7a4752677c44 ("ARM: at91: dt: add device tree file for SAMA5D4ek board") Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-10ARM: mvebu: update Ethernet compatible string for Armada XPSimon Guinot
[ Upstream commit ea3b55fe83b5fcede82d183164b9d6831b26e33b ] This patch updates the Ethernet DT nodes for Armada XP SoCs with the compatible string "marvell,armada-xp-neta". Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Fixes: 77916519cba3 ("arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces") Cc: <stable@vger.kernel.org> # v3.8+ Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-10ARM: dts: sunxi: Adjust touchscreen compatible for sun5i and laterHans de Goede
commit 8bf1b9b3d90194a174493febc731f7783f2adf1a upstream. The touchscreen controller in the A13 and later has a different temperature curve than the one in the original A10, change the compatible for the A13 and later so that the kernel will use the correct curve. Reported-by: Tong Zhang <lovewilliam@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-08Merge tag 'omap-for-v4.1/fixes-rc6' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge omap fixes for v4.1, urgent fix to avoid potential hardware damage From Tony Lindgren: Omap fixes for the -rc cycle, including a fix for potential hardware breakage on BeagleBones: - BeagleBones don't support RTC-only mode, it can cause hardware damage if system-power-controller is specified without ti,pmic-shutdown-controller - Fix a recent regression to am3517 SoCs caused by the recent clock move that was not noticed until now despite automated boot testing - Fix a regression for n900 touchscreen triggered by recent recent input changes - Fix compatible property for dm816x USB to avoid errors with USB Ethernet - Fix oops for omap3 when built with CONFIG_THUMB2_KERNEL * tag 'omap-for-v4.1/fixes-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-boneblack: disable RTC-only sleep to avoid hardware damage ARM: dts: AM35xx: fix system control module clocks ARM: dts: Fix n900 dts file to work around 4.1 touchscreen regression on n900 ARM: dts: Fix dm816x to use right compatible flag for MUSB ARM: OMAP3: Fix booting with thumb2 kernel
2015-06-01ARM: dts: am335x-boneblack: disable RTC-only sleep to avoid hardware damageMatthijs van Duin
Avoid entering "RTC-only mode" at poweroff. It is unsupported by most versions of BeagleBone, and risks hardware damage. The damaging configuration is having system-power-controller without ti,pmic-shutdown-controller. Reported-by: Matthijs van Duin <matthijsvanduin@gmail.com> Tested-by: Matthijs van Duin <matthijsvanduin@gmail.com> Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Johan Hovold <johan@kernel.org> [Matthijs van Duin: added explanatory comments] Signed-off-by: Matthijs van Duin <matthijsvanduin@gmail.com> Fixes: http://bugs.elinux.org/issues/143 Cc: stable@vger.kernel.org # v3.12+ [tony@atomide.com: updated comments with the hardware breaking info] Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-06-01ARM: dts: AM35xx: fix system control module clocksTero Kristo
New system control module layout for omap3 overlooked parts of the am35xx configuration. Basically the am35xx clocks were not converted to use the changed offsets, which caused weird boot warnings. The errors were not fatal so far, so they were not caught earlier. Fixed by applying the proper offsets for the AM35xx scm clocks. Fixes: b8845074cf ("ARM: dts: omap3: add minimal l4 bus layout with...") Signed-off-by: Tero Kristo <t-kristo@ti.com> Reported-by: Jeroen Hofstee <linux-arm@myspectrum.nl> Cc: Paul Walmsley <paul@pwsan.com> Tested-by: Jeroen Hofstee <jeroen@myspectrum.nl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-06-01Merge tag 'mvebu-fixes-4.1-3' of git://git.infradead.org/linux-mvebu into fixesArnd Bergmann
Merge "mvebu fixes for 4.1 (part 3)" from Gregory CLEMENT: Disable unused internal RTC for Mamba from linksys (Armada XP) And 2 commits fixing regressions on mvebu-mbus: - the first one for Kirkwood or Orion SoC - the second one for DMA when the platform have more than 4GB (only possible on Armada XP as far as I know) * tag 'mvebu-fixes-4.1-3' of git://git.infradead.org/linux-mvebu: Revert "bus: mvebu-mbus: make sure SDRAM CS for DMA don't overlap the MBus bridge window" bus: mvebu-mbus: do not set WIN_CTRL_SYNCBARRIER on non io-coherent platforms. ARM: mvebu: armada-xp-linksys-mamba: Disable internal RTC
2015-05-29Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "Two weeks worth of small bug fixes this time, nothing sticking out this time: - one defconfig change to adapt to a modified Kconfig symbol - two fixes for i.MX for backwards compatibility with older DT files that was accidentally broken - one regression fix for irq handling on pxa - three small dt files on omap, and one each for imx and exynos" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: multi_v7_defconfig: Replace CONFIG_USB_ISP1760_HCD by CONFIG_USB_ISP1760 ARM: imx6: gpc: don't register power domain if DT data is missing ARM: imx6: allow booting with old DT ARM: dts: set display clock correctly for exynos4412-trats2 ARM: pxa: pxa_cplds: signedness bug in probe ARM: dts: Fix WLAN interrupt line for AM335x EVM-SK ARM: dts: omap3-devkit8000: Fix NAND DT node ARM: dts: am335x-boneblack: disable RTC-only sleep ARM: dts: fix imx27 dtb build rule ARM: dts: imx27: only map 4 Kbyte for fec registers
2015-05-29ARM: dts: Fix n900 dts file to work around 4.1 touchscreen regression on n900Pavel Machek
Fix dts to match what the Linux kernel expects. This works around touchscreen problems in 4.1 linux on Nokia n900. Signed-off-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-05-29ARM: dts: Fix dm816x to use right compatible flag for MUSBTony Lindgren
With commit 3e457371f436 ("usb: musb: Fix fifo reads for dm816x with musb_dsps") we need to use the right compatible flag to avoid issues with FIFO reads. Cc: Bin Liu <binmlist@gmail.com> Cc: Brian Hutchinson <b.hutchman@gmail.com> Cc: George Cherian <george.cherian@ti.com> Fixes: 3e457371f436 ("usb: musb: Fix fifo reads for dm816x with musb_dsps") Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-05-29Merge tag 'samsung-fixes-3' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Merge "Samsung fix for v4.1" from Kukjin Kim: - Set display clock correctly for exynos4412-trats2 : fix the following error exynos-drm: No connectors reported connected with modes [drm] Cannot find any crtc or sizes - going 1024x768 * tag 'samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: set display clock correctly for exynos4412-trats2
2015-05-28ARM: mvebu: armada-xp-linksys-mamba: Disable internal RTCImre Kaloz
The Mamba (like the OpenBlocks AX3) doesn't have a crystal connected to the internal RTC - let's prevent the kernel from probing it. Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: <stable@vger.kernel.org> # v4.0 + Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-05-23ARM: dts: set display clock correctly for exynos4412-trats2Inki Dae
This patch sets display clock correctly. If Display clock isn't set correctly then you would find below messages and Display controller doesn't work correctly. exynos-drm: No connectors reported connected with modes [drm] Cannot find any crtc or sizes - going 1024x768 Fixes: abc0b1447d49 ("drm: Perform basic sanity checks on probed modes") Cc: <stable@vger.kernel.org> Signed-off-by: Inki Dae <inki.dae@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Don't leak ipvs->sysctl_tbl, from Tommi Rentala. 2) Fix neighbour table entry leak in rocker driver, from Ying Xue. 3) Do not emit bonding notifications for unregistered interfaces, from Nicolas Dichtel. 4) Set ipv6 flow label properly when in TIME_WAIT state, from Florent Fourcot. 5) Fix regression in ipv6 multicast filter test, from Henning Rogge. 6) do_replace() in various footables netfilter modules is missing a check for 0 counters in the datastructure provided by the user. Fix from Dave Jones, and found with trinity. 7) Fix RCU bug in packet scheduler classifier module unloads, from Daniel Borkmann. 8) Avoid deadlock in tcp_get_info() by using u64_sync. From Eric Dumzaet. 9) Input packet processing can race with inetdev_destroy() teardown, fix potential OOPS in ip_error() by explicitly testing whether the inetdev is still attached. From Eric W Biederman. 10) MLDv2 parser in bridge multicast code breaks too early while parsing. Fix from Thadeu Lima de Souza Cascardo. 11) Asking for settings on non-zero PHYID doesn't work because we do not import the command structure from the user and use the PHYID provided there. Fix from Arun Parameswaran. 12) Fix UDP checksums with IPV6 RAW sockets, from Vlad Yasevich. 13) Missing NF_TABLES depends for TPROXY etc can cause build failures, fix from Florian Westphal. 14) Fix netfilter conntrack to handle RFC5961 challenge ACKs properly, from Jesper Dangaard Brouer. 15) If netlink autobind retry fails, we have to reset the sockets portid back to zero. From Herbert Xu. 16) VXLAN netns exit code unregisters using wrong device, from John W Linville. 17) Add some USB device IDs to ath3k and btusb bluetooth drivers, from Dmitry Tunin and Wen-chien Jesse Sung. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) bridge: fix lockdep splat net: core: 'ethtool' issue with querying phy settings bridge: fix parsing of MLDv2 reports ARM: zynq: DT: Use the zynq binding with macb net: macb: Disable half duplex gigabit on Zynq net: macb: Document zynq gem dt binding ipv4: fill in table id when replacing a route cdc_ncm: Fix tx_bytes statistics ipv4: Avoid crashing in ip_error tcp: fix a potential deadlock in tcp_get_info() net: sched: fix call_rcu() race on classifier module unloads net: phy: Make sure phy_start() always re-enables the phy interrupts ipv6: fix ECMP route replacement ipv6: do not delete previously existing ECMP routes if add fails Revert "netfilter: bridge: query conntrack about skb dnat" netfilter: ensure number of counters is >0 in do_replace() netfilter: nfnetlink_{log,queue}: Register pernet in first place tcp: don't over-send F-RTO probes tcp: only undo on partial ACKs in CA_Loss net/ipv6/udp: Fix ipv6 multicast socket filter regression ...
2015-05-22ARM: zynq: DT: Use the zynq binding with macbNathan Sullivan
Use the new zynq binding for macb ethernet, since it will disable half duplex gigabit like the Zynq TRM says to do. Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-20Merge tag 'omap-for-v4.1/fixes-rc4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge "Few minimal omap device tree fixes for v4.1-rc series" from Tony Lindgren: - Disable BeagleBone black RTC-only sleep mode because of hardare related issues - Fix NAND on Devkit8000 - Fix WLAN interrupt line on AM335x EVM-SK * tag 'omap-for-v4.1/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Fix WLAN interrupt line for AM335x EVM-SK ARM: dts: omap3-devkit8000: Fix NAND DT node ARM: dts: am335x-boneblack: disable RTC-only sleep
2015-05-20ARM: dts: Fix WLAN interrupt line for AM335x EVM-SKRomain Izard
While Sitara AM335x SoCs are very close to OMAP SoCs, the 32-line GPIO controllers are numbered from 0 on AM335x and from 1 on OMAP. But when the configuration for the TI WLAN controllers was converted from platform data to device tree, this detail was overlooked, as 10 boards were using OMAP with the WL12xx and WL18xx controllers, and only one was based on AM335x. This invalid configuration prevents the WL1271 module on the AM335x EVM-SK from notifying interrupts to the SoC, and breaks the wlan driver. The DTS must be corrected to use the correct GPIO controller. Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-05-20ARM: dts: omap3-devkit8000: Fix NAND DT nodeAnthoine Bourgeois
Add nand-ecc-opt and device-width properties to enable nand support on Devkit8000. Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-05-20ARM: dts: am335x-boneblack: disable RTC-only sleepRobert Nelson
Fixes: http://bugs.elinux.org/issues/143 Entering RTC-only sleep is only properly supported on early prototypes series (pre-A6) of the BeagleBone Black. Since rev (A6A), which include all production versions, it is not support at due to. (rev A6) enable of the 3v3b regulator moved from LDO2 to LDO4 (3v3a) side-effect: 3v3b rail remains on in sleep-mode (also in off-mode when battery-powered) (rev A6A) am335x vdds supply moved from LDO3 to LDO1 side-effect: vdds remains supplied in sleep-mode Reported-by: Matthijs van Duin <matthijsvanduin@gmail.com> Tested-by: Matthijs van Duin <matthijsvanduin@gmail.com> Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Johan Hovold <johan@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-05-20Merge tag 'imx-fixes-4.1-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Merge "The i.MX fixes for 4.1, 2nd round" from Shawn Guo: - Fix i.MX27 FEC register map which overlaps the SCC (Security Controller) register space. - Fix i.MX27 DTB build rule which was wrongly controlled by i.MX31 option. * tag 'imx-fixes-4.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: fix imx27 dtb build rule ARM: dts: imx27: only map 4 Kbyte for fec registers
2015-05-19ARM: dts: fix imx27 dtb build ruleShawn Guo
The i.MX27 dtb build should be controlled by CONFIG_SOC_IMX27 rather than CONFIG_SOC_IMX31. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Fixes: cb612390e546 ("ARM: dts: Only build dtb if associated Arch and/or SoC is enabled") Cc: <stable@vger.kernel.org>
2015-05-15Merge tag 'samsung-fixes-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Merge "Samsung 2nd fixes for v4.1" from Kukjin Kim: - fix second S2R on exynos4412 based Trats2, Odroid U3 boards which happened after enabling L2$ and caused by commit 13cfa6c4f7fa ("ARM: EXYNOS: Fix CPU idle clock down after CPU off") And replace the soc_is_exynosxxx() macro with of_compatible_xxx - fix dereference of ERR_PTR of of_genpd_get_from_provider() - fix suspend problem on old DT machines to skip the initialization suspend and caused by commit 8b283c025443 ("ARM: exynos4/5: convert pmu wakeup to stacked domains") - add keep-power-in-suspend for Peach Boards to support S2R and has been missed in previous pull-request for fixes * tag 'samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Use of_machine_is_compatible instead of soc_is_exynos4 ARM: EXYNOS: Fix failed second suspend on Exynos4 ARM: EXYNOS: Fix dereference of ERR_PTR returned by of_genpd_get_from_provider ARM: EXYNOS: Don't try to initialize suspend on old DT ARM: dts: Add keep-power-in-suspend to WiFi SDIO node for Peach Boards
2015-05-15Merge tag 'mvebu-fixes-4.1-2' of git://git.infradead.org/linux-mvebu into fixesArnd Bergmann
Merge "mvebu fixes for 4.1 (part 2)" from Gregory CLEMENT: Fix the main PLL frequency on Armada 375, 38x and 39x SoCs Add clock-names to CuBox Si5351 clk generator Add dts entries in the MAINTAINERS file * tag 'mvebu-fixes-4.1-2' of git://git.infradead.org/linux-mvebu: MAINTAINERS: Add dts entries for some of the Marvell SoCs ARM: dove: Add clock-names to CuBox Si5351 clk generator ARM: mvebu: Fix the main PLL frequency on Armada 375, 38x and 39x SoCs
2015-05-14ARM: dts: imx27: only map 4 Kbyte for fec registersPhilippe Reynes
According to the imx27 documentation, fec has a 4 Kbyte memory space map. Moreover, the actual 16 Kbyte mapping overlaps the SCC (Security Controller) memory register space. So, we reduce the memory register space to 4 Kbyte. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 9f0749e3eb88 ("ARM i.MX27: Add devicetree support") Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-05-13ARM: dts: Add keep-power-in-suspend to WiFi SDIO node for Peach BoardsJavier Martinez Canillas
The Marvell mwifiex driver prevents the system to enter into a suspend state if the card power is not preserved during a suspend/resume cycle. So Suspend-to-RAM and Suspend-to-idle is failing on Exynos5800 Peach Pi and Exynos5420 Peach Pit Chromebooks. Add the keep-power-in-suspend Power Management property to the SDIO/MMC node so the mwifiex suspend handler doesn't fail and the system is able to enter into a suspend state. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-05-12ARM: vexpress/tc2: Add interrupt-affinity to the PMU nodeSudeep Holla
Commit 9fd85eb502a7 ("ARM: pmu: add support for interrupt-affinity property") added an optional "interrupt-affinity" property, to specify the CPU affinity for each SPI listed in the interrupts property. Without this property, we get this boot warning: CPU PMU: Failed to parse <no-node>/interrupt-affinity[0] This patch adds interrupt-affinity to the PMU node in the vexpress-ca15_a7(a.k.a TC2) device tree. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-12ARM: vexpress/ca9: Add interrupt-affinity to the PMU nodeRobert Schwebel
Commit 9fd85eb502a7 ("ARM: pmu: add support for interrupt-affinity property") added an optional "interrupt-affinity" property, to specify the CPU affinity for each SPI listed in the interrupts property. Without this property, we get this boot warning: CPU PMU: Failed to parse <no-node>/interrupt-affinity[0] This patch adds interrupt-affinity to the PMU node in the vexpress-v2p-ca9 device tree. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-12ARM: vexpress/ca9: Add unified-cache property to l2 cache nodeRobert Schwebel
Commit d9d1f3e2d711 ("ARM: l2c: check that DT files specify the required "cache-unified" property") mandates to specify this required property. Without this property, we get this boot warning: "L2C: device tree omits to specify unified cache" This patch adds "cache-unified" property to L2 cache node in vexpress CA9 device tree. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-12Merge tag 'tegra-for-4.1-fixes-for-rc3' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into fixes Merge "ARM: tegra: Device tree fixes for v4.1-rc3" from Thierry Reding: This contains a fix for a bug that was introduced a couple of months ago by a patch that git misapplied because of a lack of context. * tag 'tegra-for-4.1-fixes-for-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Correct which USB controller has the UTMI pad registers
2015-05-11ARM: dove: Add clock-names to CuBox Si5351 clk generatorSebastian Hesselbarth
Si5351 clock generator on CuBox uses XTAL as clock reference, name the clock phandle accordingly. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2015-05-10Merge tag 'samsung-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung Pull samsung fixes from Kukjin Kim: "Here is Samsung fixes for v4.1. Since I've missed to send this via arm-soc tree before v4.1-rc3, so I'm sending this to you directly - fix commit ea08de16eb1b ("ARM: dts: Add DISP1 power domain for exynos5420") which causes 'unhandled fault: imprecise external abort' error when PD turned off. ("make DP a consumer of DISP1 power domain") - fix 's3c-rtc' probe failure on Odriod-X2/U2/U3 boards ("add 'rtc_src' clock to rtc node for source clock of rtc") - fix typo for 'cpu-crit-0' trip point on exynos5420/5440 - fix S2R failure on exynos5250-snow due to card power of Marvell WiFi driver (suspend/resume) ("add keep-power-in-susped to WiFi SDIO node")" * tag 'samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Add keep-power-in-suspend to WiFi SDIO node for exynos5250-snow ARM: dts: Fix typo in trip point temperature for exynos5420/5440 ARM: dts: add 'rtc_src' clock to rtc node for exynos4412-odroid boards ARM: dts: Make DP a consumer of DISP1 power domain on Exynos5420
2015-05-09ARM: dts: Add keep-power-in-suspend to WiFi SDIO node for exynos5250-snowJavier Martinez Canillas
The Marvell mwifiex driver prevents the system to enter into a suspend state if the card power is not preserved during a suspend/resume cycle. So Suspend-to-RAM and Suspend-to-idle are failing on Exynos5250 Snow. Add the keep-power-in-suspend Power Management property to the SDIO/MMC node so the mwifiex suspend handler doesn't fail and the system is able to enter into a suspend state. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-05-09ARM: dts: Fix typo in trip point temperature for exynos5420/5440Abhilash Kesavan
Remove the extra zero in the "cpu-crit-0" trip point for exynos5420 and exynos5440. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-05-09ARM: dts: add 'rtc_src' clock to rtc node for exynos4412-odroid boardsMarkus Reichl
The Exynos4412 SoC has a s3c6410 RTC where the source clock is now a mandatory property. This patch fixes probe failure of s3c-rtc on Odroid-X2/U2/U3 boards. Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-05-09ARM: dts: Make DP a consumer of DISP1 power domain on Exynos5420Javier Martinez Canillas
Commit ea08de16eb1b ("ARM: dts: Add DISP1 power domain for exynos5420") added a device node for the Exynos5420 DISP1 power domain but dit not make the DP controller a consumer of that power domain. This causes an "Unhandled fault: imprecise external abort" error if the exynos-dp driver tries to access the DP controller registers and the PD was turned off. This lead to a kernel panic and a complete system hang. Make the DP controller device node a consumer of the DISP1 power domain to ensure that the PD is turned on when the exynos-dp driver is probed. Fixes: ea08de16eb1b ("ARM: dts: Add DISP1 power domain for exynos5420") Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-05-07Merge tag 'stericsson-fixes-v4.1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into fixes Merge "Ux500 fixes" from Linus Walleij: This fixes an MMC/SD configuration issue present for some time in the Ux500 DT but triggered by proper error handling in v4.1-rc1. * tag 'stericsson-fixes-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: ux500: Enable GPIO regulator for SD-card for snowball ARM: ux500: Enable GPIO regulator for SD-card for HREF boards ARM: ux500: Move GPIO regulator for SD-card into board DTSs
generated by cgit v1.2.3 (git 2.0.4) at 2025-06-07 15:08:43 +0000