summaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)Author
2013-06-27Merge branch 'msm/fixes' into next/lateOlof Johansson
Merging in msm/fixes to avoid silly conflicts at top level. Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-27can: flexcan: Use a regulator to control the CAN transceiverFabio Estevam
Instead of using a GPIO to turn on/off the CAN transceiver, it is better to use a regulator as some systems may use a PMIC to power the CAN transceiver. Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-06-27Merge tag 'davinci-for-v3.11/dt' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/late From Sekhar Nori: Device Tree updates for DaVinci This patch set updates da850 DTS files to enable use of C pre-processor. Also updates pinctrl-single DT data to go with changes done in that module to enable a single register to service configuration of multiple pins. * tag 'davinci-for-v3.11/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci: da850: adopt to pinctrl-single change for configuring multiple pins ARM: davinci: da850: Use #include for all device trees Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-27ARM: integrator: set local side PCI addresses rightLinus Walleij
This alters the local side address of the iospace to zero, non prefetchable memory local side address to 0x00000000 and prefetchable memory local side address to 0x10000000, so as to match the values actually poked in by the driver. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-26ARM: davinci: da850: adopt to pinctrl-single change for configuring multiple ↵Manjunathappa, Prakash
pins function-mask DT property is now a mask for a pin at each pin offset inside a given pincontrol register. Fix DA850 DT data to reflect this change. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> [nsekhar@ti.com: reword commit message for clarity] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-06-26ARM: dts: Add pcie controller node for exynos5440-ssdk5440Jingoo Han
This patch adds pcie controller node for exynos5440-ssdk5440, and also adds a phandle for pin controller node. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-26ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoCJingoo Han
Exynos5440 has two PCIe controllers which can be used as root complex for PCIe interface. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-26Merge tag 'at91-dt' of git://github.com/at91linux/linux-at91 into next/dtArnd Bergmann
From Nicolas Ferre: - more SPI DT activation for rm9200 - SPI DMA for at91sam9n12/sama5d3 And one little fix for SPI compatibility string * tag 'at91-dt' of git://github.com/at91linux/linux-at91: ARM: at91: dt: rm9200ek: add spi support ARM: at91: dt: rm9200: add spi support ARM: at91/DT: at91sam9n12: add SPI DMA client infos ARM: at91/DT: sama5d3: add SPI DMA client infos ARM: at91/DT: fix SPI compatibility string Conflicts: arch/arm/boot/dts/sama5d3.dtsi Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-26ARM: at91: dt: rm9200ek: add spi supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-06-26ARM: at91: dt: rm9200: add spi supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-06-26ARM: at91/DT: at91sam9n12: add SPI DMA client infosNicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-06-26ARM: at91/DT: sama5d3: add SPI DMA client infosNicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Wenyou Yang <wenyou.yang@atmel.com>
2013-06-26ARM: at91/DT: fix SPI compatibility stringNicolas Ferre
In previous version of SPI driver we where using different compatibility stings for finding SPI features. We are now using the IP revision information. So we stay with the unique compatibility string for this driver: "atmel,at91rm9200-spi". Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Wenyou Yang <wenyou.yang@atmel.com>
2013-06-25Merge branch 'sti/soc' into next/lateOlof Johansson
From Srinivas Kandagatla <srinivas.kandagatla@st.com>: This patch-set adds basic support for STMicroelectronics STi series SOCs which includes STiH415 and STiH416 with B2000 and B2020 board support. STiH415 and STiH416 are dual-core ARM Cortex-A9 CPU, designed for use in Set-top-boxes. The SOC support is available in mach-sti which contains support code for STiH415, STiH416 SOCs including the generic board support. The reason for adding two SOCs at this patch set is to show that no new C code is required for second SOC(STiH416) support. * sti/soc: ARM: stih41x: Add B2020 board support ARM: stih41x: Add B2000 board support ARM: sti: Add DEBUG_LL console support ARM: sti: Add STiH416 SOC support ARM: sti: Add STiH415 SOC support Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25Merge branch 'nspire/soc' into next/lateOlof Johansson
From Daniel Tang <dt.tangr@gmail.com> This is the initial platform code for the TI-Nspire graphing calculators. The platform support is rather unspectacular, but still contains platform data for the LCD panel, which will get removed once there is a DT binding for the AMBA CLCD driver. * nspire/soc: arm: Add Initial TI-Nspire support arm: Add device trees for TI-Nspire hardware Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25ARM: stih41x: Add B2020 board supportSrinivas Kandagatla
B2020 ADI board is reference board for STIH415/416 SOCs, it has 2 x UART, 4x USB, 1 x Ethernet, 1 x SATA, 1 x PCIe, and 2GB RAM with standard set-top box IPs. This patch adds initial support to B2020 with STiH415/416 with SBC_UART1 as console and a heard beat LED. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> CC: Stephen Gallimore <stephen.gallimore@st.com> CC: Stuart Menefy <stuart.menefy@st.com> CC: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25ARM: stih41x: Add B2000 board supportSrinivas Kandagatla
B2000 board is reference board for STIH415/416 SOCs, it has 2 x UART, 4x USB, 2 x Ethernet, 1 x SATA, 1 x PCIe, and 1GB RAM. This patch add initial support to b2000 with STiH415/416 with UART2 as console and a heard beat LED. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> CC: Stephen Gallimore <stephen.gallimore@st.com> CC: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25ARM: sti: Add STiH416 SOC supportSrinivas Kandagatla
The STiH416 is advanced HD AVC processor with 3D graphics acceleration and 1.2-GHz ARM Cortex-A9 SMP CPU. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> CC: Stephen Gallimore <stephen.gallimore@st.com> CC: Stuart Menefy <stuart.menefy@st.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25ARM: sti: Add STiH415 SOC supportSrinivas Kandagatla
The STiH415 is the next generation of HD, AVC set-top box processors for satellite, cable, terrestrial and IP-STB markets. It is an ARM Cortex-A9 1.0 GHz, dual-core CPU. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> CC: Stephen Gallimore <stephen.gallimore@st.com> CC: Stuart Menefy <stuart.menefy@st.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25Merge tag 'fixes-non-3.11-2' of git://git.infradead.org/users/jcooper/linux ↵Olof Johansson
into next/fixes-non-critical From Jason Cooper: - mv78260: catch missing fix for mvneta register length * tag 'fixes-non-3.11-2' of git://git.infradead.org/users/jcooper/linux: ARM: mvebu: fix length of ethernet registers in mv78260 dtsi Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25Merge tag 'soc-exynos5420-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/late From Kukjin Kim, this adds pinctrl support for Exynos 5420. * tag 'soc-exynos5420-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: pinctrl: exynos: add exynos5420 SoC specific data ARM: dts: add pinctrl support to EXYNOS5420 Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-24Merge 3.10-rc7 into usb-nextGreg Kroah-Hartman
We want the USB fixes and other good stuff in this branch as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-24ARM: 7770/1: remove residual ARMv2 support from decompressorMarc Zyngier
arm26 support in Linux is long gone, yet it left an interresting, fossilized trace in the decompressor. Remove it so people won't get confused about what teqp is actually doing here... Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-06-23ARM: mvebu: fix length of ethernet registers in mv78260 dtsiEzequiel Garcia
The length of the registers area for the Marvell 370/XP Ethernet controller was incorrect in the .dtsi: 0x2500, while it should have been 0x4000. This problem wasn't noticed because there used to be a static mapping for all the MMIO register region set up by ->map_io(). The register length was fixed in all the other device tree files, except from the armada-xp-mv78260.dtsi, in the following commit: commit cf8088c5cac6ce20d914b9131533844b9291a054 Author: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Date: Tue May 21 12:33:27 2013 +0200 arm: mvebu: fix length of Ethernet registers area in .dtsi This commit fixes a kernel panic in mvneta_probe(), when the kernel tries to access the unmapped registers: [ 163.639092] mvneta d0070000.ethernet eth0: mac: 6e:3c:4f:87:17:2e [ 163.646962] mvneta d0074000.ethernet eth1: mac: 6a:04:4e:6f:f5:ef [ 163.654853] mvneta d0030000.ethernet eth2: mac: 2a:99:19:19:fc:4c [ 163.661258] Unable to handle kernel paging request at virtual address f011bcf0 [ 163.668523] pgd = c0004000 [ 163.671237] [f011bcf0] *pgd=2f006811, *pte=00000000, *ppte=00000000 [ 163.677565] Internal error: Oops: 807 [#1] SMP ARM [ 163.682370] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0-rc6-01850-gba0682e #11 [ 163.690046] task: ef04c000 ti: ef03e000 task.ti: ef03e000 [ 163.695467] PC is at mvneta_probe+0x34c/0xabc [...] Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-06-22Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "These are two fixes that came in this week, one for a regression we introduced in 3.10 in the GIC interrupt code, and the other one fixes a typo in newly introduced code" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: irqchip: gic: call gic_cpu_init() as well in CPU_STARTING_FROZEN case ARM: dts: Correct the base address of pinctrl_3 on Exynos5250
2013-06-21arm: Add device trees for TI-Nspire hardwareDaniel Tang
This patch adds device trees for describing the TI-Nspire hardware. Changes between v1 and v2: * Change "keymap" binding to the standard "linux,keymap" binding. Signed-off-by: Daniel Tang <dt.tangr@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-21Merge tag 'dt-3.11-6' of git://git.infradead.org/users/jcooper/linux into ↵Arnd Bergmann
next/dt From Jason Cooper: mvebu dt changes for v3.11 (round 6) - mvebu - mini-PCIe connectors on Armada 370 RD - kirkwood - correct internal register ranges translation * tag 'dt-3.11-6' of git://git.infradead.org/users/jcooper/linux: ARM: Kirkwood: Fix the internal register ranges translation arm: mvebu: enable mini-PCIe connectors on Armada 370 RD Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-21ARM: Kirkwood: Fix the internal register ranges translationEzequiel Garcia
Although the internal register window size is 1 MiB, the previous ranges translation for the internal register space had a size of 0x4000000. This was done to allow the crypto and nand node to access the corresponding 'sram' and 'nand' decoding windows. In order to describe the hardware more accurately, we declare the real 1 MiB internal register space in the ranges, and add a translation entry for the nand node to access the 'nand' window. This commit will make future improvements on the MBus DT binding easier. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-06-21Merge branch 'armsoc/for-3.11/dt' of git://github.com/broadcom/bcm11351 into ↵Arnd Bergmann
next/dt From Christian Daudt: * 'armsoc/for-3.11/dt' of git://github.com/broadcom/bcm11351: ARM: dts: bcm281xx: change comment to C89 style ARM: mmc: bcm281xx SDHCI driver (dt mods) ARM: dts: bcm281xx: use existing defines for irqs ARM: dts: bcm281xx: use #include for device tree files Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-21Merge tag 'renesas-dt2-for-v3.11' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt From Simon Horman: Second Round of Renesas ARM-based SoC DT updates for v3.11 * Increased DT coverage for renesas-intc-irqpin by Guennadi Liakhovetski * Clean up of address format used in sh73a0 dtsi file by Guennadi Liakhovetski * tag 'renesas-dt2-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: irqpin: add a DT property to enable masking on parent ARM: shmobile: sh73a0: remove "0x" prefix from DT node names irqchip: renesas-intc-irqpin: DT binding for sense bitfield width Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-21Merge tag 'soc-exynos5420-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/late From Kukjin Kim: based on tags/common-clk-audio - add support for exynos5420 SoC * tag 'soc-exynos5420-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: extend soft-reset support for EXYNOS5420 ARM: EXYNOS: add secondary CPU boot base location for EXYNOS5420 clocksource: exynos_mct: use (request/free)_irq calls for local timer registration ARM: dts: Add initial device tree support for EXYNOS5420 clk: exynos5420: register clocks using common clock framework ARM: EXYNOS: use four additional chipid bits to identify EXYNOS family serial: samsung: select EXYNOS specific driver data if ARCH_EXYNOS is defined ARM: EXYNOS: Add support for EXYNOS5420 SoC ARM: dts: list the CPU nodes for EXYNOS5250 ARM: dts: fork out common EXYNOS5 nodes Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-21Merge tag 'renesas-cleanup-boot-for-v3.11' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc From Simon Horman: Renesas ARM based SoC boot cleanup for v3.11 Work by Magnus Damm and others to clean up the boot of and move things closer to supporting multi-arch. As a side effect of this work it was decided to remove support for two boards, Bonito and AP4EVB. Those patches are included in this series as they depend on earlier patches in the series. * tag 'renesas-cleanup-boot-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: Remove Bonito board support ARM: shmobile: Remove AP4EVB board support ARM: shmobile: Remove mach/memory.h ARM: shmobile: Remove MEMORY_START/SIZE ARM: shmobile: Enable ARM_PATCH_PHYS_VIRT ARM: shmobile: Remove old SCU boot code ARM: shmobile: EMEV2 SMP with SCU boot fn and args ARM: shmobile: sh73a0 SMP with SCU boot fn and args ARM: shmobile: r8a7779 SMP with SCU boot fn and args ARM: shmobile: Add SCU boot function using argument ARM: shmobile: Add SMP boot function and argument ARM: shmobile: Rework sh7372 sleep code to use virt_to_phys() ARM: shmobile: Remove romImage CONFIG_MEMORY_START ARM: shmobile: Let romImage rely on default ATAGS ARM: shmobile: uImage load address rework Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-21Merge branch 'ux500/cleanup' into next/driversArnd Bergmann
Patches from Lee Jones: This gets rid of mop500_snowball_ethernet_clock_enable() which is no longer in use. It also straightens out a bug which ensures the SMSC911x's regulator is turned on at start-up when using Device Tree. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-21ARM: ux500: Correct the EN_3v3 regulator's on/off GPIOLee Jones
When this node was added, the AB8500 GPIO driver was pretty broken. As a hack, we pretended that NOMADIK GPIO 26 was the correct on/off pin, as it was unused. It worked because AB8500 GPIO 26 was in an 'always on from boot' state. Now the AB8500 GPIO driver is working, the default state for all the pins is 'off'. Let's flip back over to use the correct GPIO which is _actually_ attached to the regulator. We're also taking the opportunity to straighten out some formatting misdemeanours, swapping spaces for tabs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-21ARM: ux500: Provide a AB8500 GPIO Device Tree nodeLee Jones
Here we're adding a node for the AB8500 GPIO device. This will allow other DT:ed components to obtain GPIOs for use within their drivers. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-21Merge tag 'v3.11-rockchip-basics' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/soc From Heiko Stuebner: Adds basic support for Rockchip Cortex-A9 SoCs. * tag 'v3.11-rockchip-basics' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm: add basic support for Rockchip RK3066a boards arm: add debug uarts for rockchip rk29xx and rk3xxx series arm: Add basic clocks for Rockchip rk3066a SoCs clocksource: dw_apb_timer_of: use clocksource_of_init clocksource: dw_apb_timer_of: select DW_APB_TIMER clocksource: dw_apb_timer_of: add clock-handling clocksource: dw_apb_timer_of: enable the use the clocksource as sched clock Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-21arm: add basic support for Rockchip RK3066a boardsHeiko Stuebner
This adds a generic devicetree board file and a dtsi for boards based on the RK3066a SoCs from Rockchip. Apart from the generic parts (gic, clocks, pinctrl) the only components currently supported are the timers, uarts and mmc ports (all DesignWare- based). Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Olof Johansson <olof@lixom.net>
2013-06-21arm: Add basic clocks for Rockchip rk3066a SoCsHeiko Stuebner
This adds a basic clock setup for rk3066a SoCs. Only the gates are set up currently, as the mux and dividers should use the upcoming generic devicetree bindings. Clocks whose rates need to be known are supplied by fixed-rate "dummy"-clocks that provide the correct rate. This is uncritical insofar that the only bootloader currently in existence for Rockchip devices is the propietary Rockchip one that always setups the clocks in the necessary way. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Mike Turquette <mturquette@linaro.org>
2013-06-20ARM: dts: bcm281xx: change comment to C89 styleMatt Porter
CodingStyle does not allow C99 style comments. Since the dts files live in the kernel for now, make this compliant. Signed-off-by: Matt Porter <matt.porter@linaro.org> Acked-by: Christian Daudt <csd@broadcom.com>
2013-06-20ARM: mmc: bcm281xx SDHCI driver (dt mods)Christian Daudt
Add SDHCI bindings for the Broadcom 281xx SoCs. Changes from V2: - Documentation cleanups Changes from V1: - split original patch into 2, one for driver and this one for dt Signed-off-by: Christian Daudt <csd@broadcom.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-06-20Merge branch 'for_3.11/dts' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into next/dt From Benoit Cousson: omap devicetree changes for v3.11 merge window - Add mandatory DT support for missing IPs, like USB host, bandgap, LED, NAND, LAN, CPSW, PWM for OMAP and AMXX devices. - Introduce new AM43x silicon. * 'for_3.11/dts' of git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt: (52 commits) ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency ARM: dts: omap4-panda: Fix DVI EDID reads ARM: dts: omap4-panda: Add USB Host support ARM: dts: AM43x EPOS EVM support ARM: dts: OMAP5: Add bandgap DT entry ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone ARM: dts: omap3-overo: Add default trigger for TWL4030 LED ARM: dts: omap3-tobi: Correct polarity for GPIO LED ARM: dts: omap3-tobi: Add SMSC911X node ARM: dts: OMAP3: Include IRQ header ARM: dts: Protect pinctrl headers against multiple inclusions ARM: AM33XX: clock data: Enable clkout2 as part of init ARM: AM33XX: clock: Add debugSS clock nodes ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evmsk ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evm ARM: dts: AM33XX: Add PWMSS device tree nodes ARM: dts: OMAP4460: Add bandgap entry for OMAP4460 devices ... Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Tony Lindgren <tony@atomide.com>
2013-06-20Merge tag 'common-clk-audio' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers From Kukjin Kim: based on exynos-dt-2 and s3c24xx-dt-2 - use #include for all Samsung DT - add clk for exynos audio subsystem (audss) and i2s - support audss and i2s for exynos5250 * tag 'common-clk-audio' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2 ARM: dts: Update Samsung I2S documentation ARM: dts: add clock provider information for i2s controllers in Exynos5250 ARM: dts: add Exynos audio subsystem clock controller node clk: samsung: register audio subsystem clocks using common clock framework ARM: dts: use #include for all device trees for Samsung Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-20Merge branches 'samsung/exynos-dt2' and 'samsung/s3c24xx-dt2' into next/driversArnd Bergmann
This is the merge base for samsung/common-clk-audio Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-20Merge tag 'exynos-dt-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt From Kukjin Kim: 2nd exynos dt update based on tags/exynos-dt-1 - enable RTC on exynos5250 snow and Arndale boards - add support LCD and PWM for exynos4210 Origen board - update bootargs to support 8GiB for exynos5440 SSDK5440 and SD5v1 boards - enable spi and add opp level for exynos5440 - add example doc for samsung-pinctrl dt bindings * tag 'exynos-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Set BUCK7 as always on for Origen board ARM: dts: Add FIMD node to Origen4210 board ARM: dts: Add LCD related pinctrl entries for exynos4210 ARM: dts: Add PWM related pinctrl entries for exynos4210 Documentation: Add examples to samsung-pinctrl device tree bindings documentation ARM: dts: Enable RTC node for exynos5250-snow ARM: dts: Enable RTC node for Arndale ARM: dts: Removing pdma for exynos5440 ARM: dts: update bootargs to support 8GiB for SSDK5440 and SD5v1 ARM: dts: Add more opp levels in exynos5440 ARM: dts: Add wm8994 regulator support on smdk5250 ARM: dts: enable spi for EXYNOS5440 SOC Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-20Merge tag 'omap-for-v3.11/board-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/boards From Tony Lindgren: Minor board changes for v3.11 merge window. These are tapering down finally as we're getting closer to making omap2+ DT only. * tag 'omap-for-v3.11/board-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: omap2plus_defconfig: enable USB_PHY and NOP_USB_XCEIV ARM: OMAP1: nokia770: enable Tahvo ARM: OMAP3EVM: Marking omap3_evm_display_init() with CONFIG_BROKEN arm: omap: board-overo: reset GPIO for SMSC911x Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-20Merge tag 'omap-for-v3.11/pm-voltdomain-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup From Tony Lindgren: PM voltage domain clean-up via Kevin Hilman <khilman@linaro.org>: OMAP: PM: remove requirement for voltage domain data; remove dummy data * tag 'omap-for-v3.11/pm-voltdomain-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: AM33xx: Remove the unused voltagedomain data ARM: OMAP2+: Powerdomain: Remove the need to always have a voltdm associated to a pwrdm Includes an update to Linux 3.10-rc6. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-20Merge tag 'omap-for-v3.11/pm-serial-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup From Tony Lindgren: Serial driver platform init code clean-up via Kevin Hilman <khilman@linaro.org>: OMAP: PM: the serial core + driver can no handle no_console_suspend support without any SoC specific handlding or SoC-specific DT bindings. Remove the now unused SoC specifics for OMAP. * tag 'omap-for-v3.11/pm-serial-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: arm: omap2+: omap_device: remove no_idle_on_suspend arm: dts: am33xx: Remove "ti,no_idle_on_suspend" property. arm: omap2+: serial: remove no_console_suspend support Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-20Merge tag 'nomadik-dt-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt From Linus Walleij: Nomadik DT and clock work: - Lee Jones' pinctrl compat ontology patches - A real clock driver for the Nomadik, 100% DT-based - Device tree changes for the Nomadik clocks * tag 'nomadik-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: nomadik: add the new clocks to the device tree clk: nomadik: implement the Nomadik clocks properly pinctrl/nomadik: Standardise Pinctrl compat string for Nomadik based platforms ARM: nomadik: Standardise Nomadik STN8815 based Pinctrl compat string in the DTS Conflicts: arch/arm/boot/dts/ste-nomadik-s8815.dts Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-20Merge tag 'sunxi-dt-for-3.11-2' of git://github.com/mripard/linux into next/dtArnd Bergmann
From Maxime Ripard: Allwinner SoCs DT additions for 3.11, part 2 Mostly adds support for the i2c controllers and the Allwinner A10S SoC. * tag 'sunxi-dt-for-3.11-2' of git://github.com/mripard/linux: ARM: sunxi: Add Olimex A10s-Olinuxino-micro device tree ARM: sunxi: dt: Add Allwinner A10s DTSI ARM: sun4i: cubieboard: Enable the i2c controllers ARM: sun5i: olinuxino: Enable the i2c controllers ARM: sun5i: dt: Add i2c muxing options ARM: sun4i: dt: Add i2c muxing options ARM: sunxi: dt: Add i2c controller nodes to the DTSI Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-20ARM: davinci: da850: Use #include for all device treesPhilip Avinash
Replace /include/ by #include for da850 device tree files, in order to use the C pre-processor, making use of #define features possible. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-18 08:06:01 +0000