summaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)Author
2013-10-25Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "There's really only one bugfix in this branch, which is a fix for timers on the integrator platform. Since Linus Walleij is resurrecting support for the platform it seems valuable to get the fix into 3.12 even though the regression has been around a while. The rest are a handful of maintainers updates. If you prefer to hold those until 3.13 then just merge the first patch on the branch which is the fix" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: Add maintainers entry for Rockchip SoCs MAINTAINERS: Tegra updates, and driver ownership MAINTAINERS: ARM: mvebu: add Sebastian Hesselbarth ARM: integrator: deactivate timer0 on the Integrator/CP
2013-10-13ARM: integrator: deactivate timer0 on the Integrator/CPLinus Walleij
This fixes a long-standing Integrator/CP regression from commit 870e2928cf3368ca9b06bc925d0027b0a56bcd8e "ARM: integrator-cp: convert use CLKSRC_OF for timer init" When this code was introduced, the both aliases pointing the system to use timer1 as primary (clocksource) and timer2 as secondary (clockevent) was ignored, and the system would simply use the first two timers found as clocksource and clockevent. However this made the system timeline accelerate by a factor x25, as it turns out that the way the clocking actually works (totally undocumented and found after some trial-and-error) is that timer0 runs @ 25MHz and timer1 and timer2 runs @ 1MHz. Presumably this divider setting is a boot-on default and configurable albeit the way to configure it is not documented. So as a quick fix to the problem, let's mark timer0 as disabled, so the code will chose timer1 and timer2 as it used to. This also deletes the two aliases for the primary and secondary timer as they have been superceded by the auto-selection Cc: stable@vger.kernel.org Cc: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-13Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A small batch of fixes this week, mostly OMAP related. Nothing stands out as particularly controversial. Also a fix for a 3.12-rc1 timer regression for Exynos platforms, including the Chromebooks" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: exynos: dts: Update 5250 arch timer node with clock frequency ARM: OMAP2: RX-51: Add missing max_current to rx51_lp5523_led_config ARM: mach-omap2: board-generic: fix undefined symbol ARM: dts: Fix pinctrl mask for omap3 ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree ARM: OMAP2: gpmc-onenand: fix sync mode setup with DT
2013-10-13ARM: exynos: dts: Update 5250 arch timer node with clock frequencyYuvaraj Kumar C D
Without the "clock-frequency" property in arch timer node, could able to see the below crash dump. [<c0014e28>] (unwind_backtrace+0x0/0xf4) from [<c0011808>] (show_stack+0x10/0x14) [<c0011808>] (show_stack+0x10/0x14) from [<c036ac1c>] (dump_stack+0x7c/0xb0) [<c036ac1c>] (dump_stack+0x7c/0xb0) from [<c01ab760>] (Ldiv0_64+0x8/0x18) [<c01ab760>] (Ldiv0_64+0x8/0x18) from [<c0062f60>] (clockevents_config.part.2+0x1c/0x74) [<c0062f60>] (clockevents_config.part.2+0x1c/0x74) from [<c0062fd8>] (clockevents_config_and_register+0x20/0x2c) [<c0062fd8>] (clockevents_config_and_register+0x20/0x2c) from [<c02b8e8c>] (arch_timer_setup+0xa8/0x134) [<c02b8e8c>] (arch_timer_setup+0xa8/0x134) from [<c04b47b4>] (arch_timer_init+0x1f4/0x24c) [<c04b47b4>] (arch_timer_init+0x1f4/0x24c) from [<c04b40d8>] (clocksource_of_init+0x34/0x58) [<c04b40d8>] (clocksource_of_init+0x34/0x58) from [<c049ed8c>] (time_init+0x20/0x2c) [<c049ed8c>] (time_init+0x20/0x2c) from [<c049b95c>] (start_kernel+0x1e0/0x39c) THis is because the Exynos u-boot, for example on the Chromebooks, doesn't set up the CNTFRQ register as expected by arch_timer. Instead, we have to specify the frequency in the device tree like this. Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com> [olof: Changed subject, added comment, elaborated on commit message] Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-13Merge tag 'fixes-against-v3.12-rc3-take2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Few fixes for omap3 related hangs and errors that people have noticed now that people are actually using the device tree based booting for omap3. Also one regression fix for timer compile for dra7xx when omap5 is not selected, and a LED regression fix for n900. * tag 'fixes-against-v3.12-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2: RX-51: Add missing max_current to rx51_lp5523_led_config ARM: mach-omap2: board-generic: fix undefined symbol ARM: dts: Fix pinctrl mask for omap3 ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree ARM: OMAP2: gpmc-onenand: fix sync mode setup with DT Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-10Merge branch 'rc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild fix from Michal Marek: "Here is an ARM Makefile fix that you even acked. After nobody wanted to take it, it ended up in the kbuild tree" * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: arm, kbuild: make "make install" not depend on vmlinux
2013-10-08ARM: dts: Fix pinctrl mask for omap3Tony Lindgren
The wake-up interrupt bit is available on omap3/4/5 processors unlike what we claim. Without fixing it we cannot use it on omap3 and the system configured for wake-up events will just hang on wake-up. Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-08ARM: OMAP3: Fix hardware detection for omap3630 when booted with device treeNishanth Menon
SoC family definitions at the moment are reactive to board needs as a result, beagle-xm would matchup with ti,omap3 which invokes omap3430_init_early instead of omap3630_init_early. Obviously, this is the wrong behavior. With clock node dts conversion, we get the following warnings before system hangs as a result and 3630 based platforms fails to boot (uart4 clocks are only present in OMAP3630 and not present in OMAP3430): ... omap_hwmod: uart4: cannot clk_get main_clk uart4_fck omap_hwmod: uart4: cannot _init_clocks WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2434 _init+0x6c/0x80() omap_hwmod: uart4: couldn't init clocks ... WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2126 _enable+0x254/0x280() omap_hwmod: timer12: enabled state can only be entered from initialized, idle, or disabled state ... WARNING: CPU: 0 PID: 46 at arch/arm/mach-omap2/omap_hwmod.c:2224 _idle+0xd4/0xf8() omap_hwmod: timer12: idle state can only be entered from enabled state WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2126 _enable+0x254/0x280() omap_hwmod: uart4: enabled state can only be entered from initialized, idle, or disabled state So, add specific compatiblity for 3630 to allow match for Beagle-XM platform. Signed-off-by: Nishanth Menon <nm@ti.com> [tony@atomide.com: left out ti,omap343x, updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-02Merge tag 'fixes-3.12-2' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson
From Jason Cooper: mvebu fixes for v3.12 (round 2) - mvebu - fix ReadyNAS 102 power button (needs to be active high) - fix ReadyNAS 102 automated rebooting (prevent hang) by add gpio-poweroff node - fix booting ReadyNAS 102 by adding MBus ranges and PCIe DT nodes - mvebu-mbus: prevent PCIe driver from continuing with corrupted resource * tag 'fixes-3.12-2' of git://git.infradead.org/linux-mvebu: bus: mvebu-mbus: Fix optional pcie-mem/io-aperture properties ARM: mvebu: add missing DT Mbus ranges and relocate PCIe DT nodes for RN102 ARM: mvebu: Add DT entry for ReadyNAS 102 to use gpio-poweroff driver ARM: mvebu: fix ReadyNAS 102 Power button GPIO to make it active high Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-02arm, kbuild: make "make install" not depend on vmlinuxRobert Richter
Install targets (install, zinstall, uinstall) on arm have a dependency to vmlinux. This may cause parts of the kernel to be rebuilt during installation. We must avoid this since this may run as root. Install targets "ABSOLUTELY MUST NOT MODIFY THE SOURCE TREE." as Linus emphasized this in: http://lkml.org/lkml/2013/7/10/600 So on arm and maybe other archs we need the same as for x86: 1648e4f8 x86, kbuild: make "make install" not depend on vmlinux This patch fixes this for arm. Dependencies are removed and instead a check to install.sh is added for the files that are needed. This issue was uncovered by this build error where the -j option is used in conjunction with install targets: $ make <makeflags> $ make <makeflags> zinstall ... DEPMOD Usage: .../scripts/depmod.sh /sbin/depmod <kernelrelease> (INSTALL_MOD_PATH and INSTALL_PATH variables set, so no root perms required in this case.) The problem is that zinstall on arm due to its dependency to vmlinux does a prepare/prepare3 and finally does a forced rewrite of kernel.release even if it exists already. Rebuilding kernel.release removes it first and then recreates it. This might race with another parallel make job running depmod. So this patch should fix this one too. Also quoting $(KERNELRELEASE) arg for install.sh as this messes argument order in case it is empty (which is the case if the kernel was not built yet). Signed-off-by: Robert Richter <robert.richter@linaro.org> Signed-off-by: Robert Richter <rric@kernel.org> Acked-by: Michal Marek <mmarek@suse.cz>. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-10-01ARM: mvebu: add missing DT Mbus ranges and relocate PCIe DT nodes for RN102Arnaud Ebalard
When 5e12a613 and 0cd3754a were introduced, Netgear ReadyNAS 102 .dts file was queued for inclusion and missed the update to have Mbus (and then BootROM) ranges properties declared. It also missed the relocation of Armada 370/XP PCIe DT nodes introduced by 14fd8ed0 after de1af8d4. This patch fixes that which makes 3.12-rc3 bootable on the NAS. Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-09-30Merge tag 'renesas-fixes4-for-v3.12' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes From Simon Horman: Fourth Round of Renesas ARM based SoC fixes for v3.12 * Remove unused #gpio-ranges-cells DT property * Remove usage of deprecated #gpio-range-cells DT property from GPIO R-Car Property was deprecated in v3.11-rc2 * Correct ether pinctl naming for armadillo800eva board Regression introduced in v3.10-rc5 * Add Micrel KSZ8041 PHY fixup to lager board This resolves a problem that has been present since 3.11-rc2 * Update SDHI DT compatibility string to the <unit>-<soc> format This makes compatibility strings consistent across all renesas hardware which currently supports DT. The bindings which are being updated where intorodiced on a per-SoC basis starting in v3.8-rc7. They may have been internally consistent when originally added. * tag 'renesas-fixes4-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: Remove #gpio-ranges-cells DT property gpio: rcar: Remove #gpio-range-cells DT property usage ARM: shmobile: armadillo: fixup ether pinctrl naming ARM: shmobile: Lager: add Micrel KSZ8041 PHY fixup ARM: shmobile: update SDHI DT compatibility string to the <unit>-<soc> format Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-30ARM: dts: sirf: fix interrupt and dma prop of VIP for prima2 and atlas6Renwei Wu
the current dts is lacking interrupt and dma prop for video input processor of prima2 and atlas6, this patch fixes it. Signed-off-by: Renwei Wu <Renwei.Wu@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-30ARM: dts: sirf: fix the ranges of peri-iobrg of prima2Barry Song
we lost an address range <0x56000000 0x56000000 0x1b00000> for peri-iobg of prima2. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-30ARM: dts: makefile: build atlas6-evb.dtb for ARCH_ATLAS6Barry Song
Makefile missed to include atlas6-evb.dtb for ARCH_ATLAS6. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-30ARM: dts: sirf: fix fifosize, clks, dma channels for UARTQipan Li
sirf uart and usp-based uart driver with full dma support has hit 3.12, here we fix the fifosize, dma channels for some HW prop. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-30ARM: mvebu: Add DT entry for ReadyNAS 102 to use gpio-poweroff driverArnaud Ebalard
Without that fix, at the end of the shutdown process, the board is still powered (led glowing, fan running, ...). Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-09-30ARM: mvebu: fix ReadyNAS 102 Power button GPIO to make it active highArnaud Ebalard
NETGEAR ReadyNAS 102 Power button definition in .dts file flags associated GPIO active low instead of active high. This results in reversed events reported by input subsystem (0 returned when the button is pressed, 1 when released). This patch makes associated GPIO active high to recover correct behaviour. Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-09-25Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesOlof Johansson
From Nicolas Ferre, first fixes series for 3.12: - removal of void IRQF_DISABLED flag in timer drivers - two little fixes in DT for at91sam9x5 family * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91: remove IRQF_DISABLED ARM: at91: at91sam9x5: set default mmc[01] pinctrl-names ARM: at91: serial: fix wrong pinctrl_usart2_rts Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-22ARM: shmobile: Remove #gpio-ranges-cells DT propertyLaurent Pinchart
This property is no longer required by the GPIO binding. Remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-21ARM: shmobile: update SDHI DT compatibility string to the <unit>-<soc> formatGuennadi Liakhovetski
Currently DT compatibility strings of both types can be found in the kernel sources: <unit>-<soc> and <soc>-<unit>, whereas a unique format should be followed and the former one is preferred. This patch converts the SDHI MMC driver and its users to the common standard. This is safe for now, since ATM no real products are using this driver with DT. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Chris Ball <cjb@laptop.org> [Removed r8a7740.dtsi portion as it is not applicable] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-20Merge tag 'fixes-3.12' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson
From Jason Cooper, mvebu fixes for v3.12: - mvebu - fix reference leaks by adding of_node_put() - update Armada XP DT clock properties to restore booting - kirkwood - add missing reg property for cpu@0 - fix typo in address of second XOR engine * tag 'fixes-3.12' of git://git.infradead.org/linux-mvebu: ARM: kirkwood: Fix address of second XOR engine ARM: mvebu: Add clock properties to Armada XP timer node ARM: mvebu: Add the reference 25 MHz fixed-clock to Armada XP ARM: Kirkwood: Add missing DT reg property to cpu@0 bus: mvebu: add missing of_node_put() to fix reference leak ARM: mvebu: add missing of_node_put() to fix reference leak Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-20ARM: kirkwood: Fix address of second XOR engineQuentin Armitage
There appears to be an error in the second address of the second XOR engine in the Kirkwood SoC device tree, which is specified as 0xd0b00 but should be 0x60b00. For confirmation of address see table 581 page 658 of: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf Also see definition of XOR1_HIGH_PHYS_BASE in arch/arm/mach-kirkwood/include/mach/kirkwood.h Signed-off-by: Quentin Armitage <quentin@armitage.org.uk> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-09-19ARM: at91: at91sam9x5: set default mmc[01] pinctrl-namesNicolas Ferre
Reported-by: Jiri Prchal <jiri.prchal@aksignal.cz> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-09-19ARM: at91: serial: fix wrong pinctrl_usart2_rtsJiri Prchal
Replace pinctrl_usart2_rts and pinctrl_usart2_cts istead of pinctrl_uart2_*. Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-09-18Merge tag 'omap-for-v3.12/fixes-dt-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren, OMAP DT fixes for 3.12-rc1: OMAP device tree changes that are needed to fix regressions and avoid electrical issues on beaglebone black. Via Benoit Cousson <bcousson@baylibre.com>: Fix BBB LDO voltage to avoid HDMI destruction Fix OMAP5 wrong attribute Fix typo in beagle xM strings Fix missing pinmux and regulator for OMAP4 wifi Fix missing pinmux for igep headset * tag 'omap-for-v3.12/fixes-dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: igep00x0: Add pinmux configuration for MCBSP2 ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for blaze ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboard ARM: dts: OMAP5: fix ocp2scp DTS data ARM: dts: OMAP5: fix reg property size ARM: dts: am335x-bone*: add DT for BeagleBone Black ARM: dts: omap3-beagle-xm: fix string error in compatible property Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-18ARM: mvebu: Add clock properties to Armada XP timer nodeEzequiel Garcia
With the addition of the Armada XP reference clock, we can now model accurately the available clock inputs for the timer: namely, nbclk and refclk. For each of this clock inputs we assign a name, for the driver to select as appropriate. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Mike Turquette <mturquette@linaro.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-09-18ARM: mvebu: Add the reference 25 MHz fixed-clock to Armada XPEzequiel Garcia
The Armada XP SoC has a reference 25 MHz fixed-clock that is used in some controllers such as the timer and the watchdog. This commit adds a DT representation of this clock through a fixed-clock compatible node. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Mike Turquette <mturquette@linaro.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-09-18ARM: Kirkwood: Add missing DT reg property to cpu@0Andrew Lunn
The kirkwood.dtsi cpu@0 node is missing the mandatory reg property. This causes of_get_cpu_node() to fail to find the node and as a result the cpufreq driver fails in its probe function. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-09-18ARM: dts: igep00x0: Add pinmux configuration for MCBSP2Enric Balletbo i Serra
Add pinmux configuration for MCBSP2 connected to the TDM interface. With this configuration the Headset modules works as expected. Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-09-18ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for blazeTony Lindgren
Commit 76787b3b (ARM: OMAP2+: Remove board-4430sdp.c) removed legacy booting in favor of device tree based booting for 4430sdp. That caused the WLAN to stop working as the related .dts entries fell through the cracks. I don't have the "1283 PG 2.21 connectivity device" on my 4430sdp, but the earlier version of this patch was tested by Luciano Coelho. This version has left out the input logic for MMC CLK line compared to the earlier version as that is not bidirectional, and should be safe to do. Cc: Rajendra Nayak <rnayak@ti.com> Cc: Luciano Coelho <luca@coelho.fi> Cc: Ruslan Bilovol <ruslan.bilovol@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-09-18ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboardTony Lindgren
Commit b42b9181 (ARM: OMAP2+: Remove board-omap4panda.c) removed legacy booting in favor of device tree based booting for pandaboard. That caused the WLAN to stop working as the related .dts entries fell through the cracks. The legacy muxing was setting pulls for GPIO 48 and 49, so let's keep that behaviour for now to avoid further regressions for BT and FM. Also input logic was enabled for MMC CLK line, but I've verified that the input logic we don't need enabled for CLK line as it's not bidirectional. Also, we want to use non-removable instead of ti,non-removable as the ti,non-removable also sets no_regulator_off_init which is really not what we want as then wl12xx won't get powered up and down which is needed for resetting it. Note that looks like the WLAN interface fails to come up after a warm reset, but that most likely was also happening with the legacy booting and needs a separate fix. Cc: Paolo Pisati <p.pisati@gmail.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Luciano Coelho <luca@coelho.fi> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-09-17ARM: dts: OMAP5: fix ocp2scp DTS dataFelipe Balbi
Fix the DTS data for ocp2scp node by adding the missing reg property. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-09-17ARM: dts: OMAP5: fix reg property sizeFelipe Balbi
USB3 block has a 64KiB space, another 64KiB is used for the wrapper. Without this change, resource_size() will get confused and driver won't probe because size will be negative. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-09-17ARM: dts: am335x-bone*: add DT for BeagleBone BlackKoen Kooi
The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI added, so create a common dtsi both can use. IMPORTANT: booting the existing am335x-bone.dts will blow up the HDMI transceiver after a dozen boots with an uSD card inserted because LDO will be at 3.3V instead of 1.8. MMC support for AM335x still isn't in, so only the LDO change has been added. Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Tested-by: Tom Rini <trini@ti.com> Tested-by: Matt Porter <matt.porter@linaro.org> Acked-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Tested-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-09-17ARM: dts: omap3-beagle-xm: fix string error in compatible propertyRobert Nelson
The beagle and beagle-xm entries were inside the same double quote. Split them to have two distinct entries. Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-09-17ARM: dts: imx6q: fix the wrong offset of the Pad Mux registerHuang Shijie
The patch "0b7a76a ARM: dts: imx6q{dl}: add DTE pads for uart" adds the DTE pads for uart. For PAD_EIM_D29, the offset of the Pad Mux register should be 0x0c8, not 0x0c4. This patch fixes it. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-17ARM: imx51.dtsi: fix PATA device clockArnaud Patard (Rtp)
Commit 718a350 (ARM: i.MX51: Add PATA support) adds pata support to the imx51.dtsi file and is using clock 161. The problem is that the right clock is 172, according to commit 5d530bb (ARM: i.MX5: Add PATA and SRTC clocks). Using the clock 172 makes things work again (and kills a nasty system freeze). Tested-by: Steev Klimaszewski <steev@gentoo.org> Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-17ARM: imx27.dtsi: fix CSPI PER clock idGwenhael Goavec-Merou
CSPI PER clock is per2clk (per2_gate id 60) instead of cspiX_ipg_gate. Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-12ARM: dts: sun7i: olinuxino-micro: Enable the EMACMaxime Ripard
The A20-olinuxino-micro has the EMAC wired in. Enable it in the DT so that we can use it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-12ARM: dts: sun7i: cubieboard2: Enable the EMACMaxime Ripard
The Cubieboard2, just like its A10 counterpart, has the Ethernet wired in. Enable it in the DT. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-12ARM: dts: sun7i: Add the muxing options for the EMACMaxime Ripard
The A20 has several muxing options for the EMAC. Yet, the currently supported boards only use one set of them. Add that pin set to the DTSI. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-12ARM: dts: sun7i: Enable the Ethernet in the A20Maxime Ripard
The Allwinner A20 SoC also have the EMAC found on the A10 and A10s. Enable the support for it in the DTSI. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-09Merge tag 'late-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late changes from Kevin Hilman: "These are changes that arrived a little late before the merge window, or had dependencies on previous branches. Highlights: - ux500: misc. cleanup, fixup I2C devices - exynos: DT updates for RTC; PM updates - at91: DT updates for NAND; new platforms added to generic defconfig - sunxi: DT updates: cubieboard2, pinctrl driver, gated clocks - highbank: LPAE fixes, select necessary ARM errata - omap: PM fixes and improvements; OMAP5 mailbox support - omap: basic support for new DRA7xx SoCs" * tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits) ARM: dts: vexpress: Add CCI node to TC2 device-tree ARM: EXYNOS: Skip C1 cpuidle state for exynos5440 ARM: EXYNOS: always enable PM domains support for EXYNOS4X12 ARM: highbank: clean-up some unused includes ARM: sun7i: Enable the A20 clocks in the DTSI ARM: sun6i: Enable clock support in the DTSI ARM: sun5i: dt: Use the A10s gates in the DTSI ARM: at91: at91_dt_defconfig: enable rm9200 support ARM: dts: add ADC device tree node for exynos5420/5250 ARM: dts: Add RTC DT node to Exynos5420 SoC ARM: dts: Update the "status" property of RTC DT node for Exynos5250 SoC ARM: dts: Fix the RTC DT node name for Exynos5250 irqchip: mmp: avoid to include irqs head file ARM: mmp: avoid to include head file in mach-mmp irqchip: mmp: support irqchip irqchip: move mmp irq driver ARM: OMAP: AM33xx: clock: Add RNG clock data ARM: OMAP: TI81XX: add always-on powerdomain for TI81XX ARM: OMAP4: clock: Lock PLLs in the right sequence ARM: OMAP: AM33XX: hwmod: Add hwmod data for debugSS ...
2013-09-09Merge tag 'renesas-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM Renesas SoC cleanup, refactoring and more SMP support from Kevin Hilman: "Lots of cleanup and refactoring and some SMP additions for Renesas platforms. Due to some inter-dependencies with other arm-soc branches, this Renesas stuff was separated out for sending after the other branches were merged. Highlights: - remove unused board support and cleanup of unused headers - refactoring of init and device registration - simplify IRQ initialization" * tag 'renesas-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (68 commits) ARM: shmobile: Per-CPU SMP boot / sleep code for SCU SoCs ARM: shmobile: Introduce per-CPU SMP boot / sleep code ARM: shmobile: Use shared SCU CPU Hotplug code on r8a7779 ARM: shmobile: Use shared SCU CPU Hotplug code on sh73a0 ARM: shmobile: Add shared SCU CPU Hotplug code ARM: shmobile: Use shared SCU SMP boot code on emev2 ARM: shmobile: Use shared SCU SMP boot code on r8a7779 ARM: shmobile: Use shared SCU SMP boot code on sh73a0 ARM: shmobile: Introduce shared SCU SMP boot code ARM: shmobile: sh73a0: Remove global GPIO_NR definition ARM: shmobile: kzm9d: remove nfsroot settings from bootargs ARM: shmobile: armadillo800eva: remove nfsroot settings from bootargs ARM: shmobile: r8a7779: move r8a7779_init_irq_xxx() to setup ARM: shmobile: r8a7740: move r8a7740_init_irq_of() to setup ARM: shmobile: bockw: add missing __initdata ARM: shmobile: r8a7790: add missing __initdata ARM: shmobile: r8a7779: add missing __initdata ARM: shmobile: Remove unused shmobile_init_time() ARM: shmobile: Use clocksource_of_init() on r8a7790 ARM: shmobile: Use default ->init_time() on KZM9G DT ref ...
2013-09-09Merge tag 'clk-for-linus-3.12' of git://git.linaro.org/people/mturquette/linuxLinus Torvalds
Pull clock framework changes from Michael Turquette: "The common clk framework changes for 3.12 are dominated by clock driver patches, both new drivers and fixes to existing. A high percentage of these are for Samsung platforms like Exynos. Core framework fixes and some new features like automagical clock re-parenting round out the patches" * tag 'clk-for-linus-3.12' of git://git.linaro.org/people/mturquette/linux: (102 commits) clk: only call get_parent if there is one clk: samsung: exynos5250: Simplify registration of PLL rate tables clk: samsung: exynos4: Register PLL rate tables for Exynos4x12 clk: samsung: exynos4: Register PLL rate tables for Exynos4210 clk: samsung: exynos4: Reorder registration of mout_vpllsrc clk: samsung: pll: Add support for rate configuration of PLL46xx clk: samsung: pll: Use new registration method for PLL46xx clk: samsung: pll: Add support for rate configuration of PLL45xx clk: samsung: pll: Use new registration method for PLL45xx clk: samsung: exynos4: Rename exynos4_plls to exynos4x12_plls clk: samsung: exynos4: Remove checks for DT node clk: samsung: exynos4: Remove unused static clkdev aliases clk: samsung: Modify _get_rate() helper to use __clk_lookup() clk: samsung: exynos4: Use separate aliases for cpufreq related clocks clocksource: samsung_pwm_timer: Get clock from device tree ARM: dts: exynos4: Specify PWM clocks in PWM node pwm: samsung: Update DT bindings documentation to cover clocks clk: Move symbol export to proper location clk: fix new_parent dereference before null check clk: wm831x: Initialise wm831x pointer on init ...
2013-09-06Merge tag 'boards-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC board updates from Olof Johansson: "Board updates for 3.12. Again, a bit of domain overlap with SoC and DT branches, but most of this is around legacy code and board support. We've found that platform maintainers have a hard time separating all of these out and might move towards fewer branches for next release. - Removal of a number of Marvell Kirkwood board files, since contents is now common and mostly configured via DT. - Device-tree updates for Marvell Dove, including irqchip and clocksource setup. - Defconfig updates. Gotta go somewhere. One new one for Renesas Lager. - New backlight drivers for backlights used on Renesas shmobile platforms. - Removal of Renesas leds driver. - Shuffling of some of the new Broadcom platforms to give room for others in the same mach directory. More in 3.13" * tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (67 commits) mmc: sdhci-bcm-kona: Staticize sdhci_bcm_kona_card_event mmc: sdhci-bcm-kona: Remove unneeded version.h inclusion ARM: bcm: Make secure API call optional ARM: DT: binding fixup to align with vendor-prefixes.txt (drivers) ARM: mmc: fix NONREMOVABLE test in sdhci-bcm-kona ARM: bcm: Rename board_bcm mmc: sdhci-bcm-kona: make linker-section warning go away ARM: tegra: defconfig updates ARM: dove: add initial DT file for Globalscale D2Plug ARM: dove: add GPIO IR receiver node to SolidRun CuBox ARM: dove: add common pinmux functions to DT ARM: dove: add cpu device tree node ARM: dove: update dove_defconfig with SI5351, PCI, and xHCI arch/arm/mach-kirkwood: Avoid using ARRAY_AND_SIZE(e) as a function argument ARM: kirkwood: fix DT building and update defconfig ARM: kirkwood: Remove all remaining trace of DNS-320/325 platform code ARM: configs: disable DEBUG_LL in bcm_defconfig ARM: bcm281xx: Board specific reboot code ARM bcm281xx: Turn on socket & network support. ARM: bcm281xx: Turn on L2 cache. ...
2013-09-06ARM: dts: exynos4: Specify PWM clocks in PWM nodeTomasz Figa
Since pwm-samsung bindings require at least one clock to be specified, this patch adds the missing clocks and clock-names properties to specify clocks used by PWM block on Exynos4 SoCs. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-06Merge tag 'soc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "This branch contains mostly additions and changes to platform enablement and SoC-level drivers. Since there's sometimes a dependency on device-tree changes, there's also a fair amount of those in this branch. Pieces worth mentioning are: - Mbus driver for Marvell platforms, allowing kernel configuration and resource allocation of on-chip peripherals. - Enablement of the mbus infrastructure from Marvell PCI-e drivers. - Preparation of MSI support for Marvell platforms. - Addition of new PCI-e host controller driver for Tegra platforms - Some churn caused by sharing of macro names between i.MX 6Q and 6DL platforms in the device tree sources and header files. - Various suspend/PM updates for Tegra, including LP1 support. - Versatile Express support for MCPM, part of big little support. - Allwinner platform support for A20 and A31 SoCs (dual and quad Cortex-A7) - OMAP2+ support for DRA7, a new Cortex-A15-based SoC. The code that touches other architectures are patches moving MSI arch-specific functions over to weak symbols and removal of ARCH_SUPPORTS_MSI, acked by PCI maintainers" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits) tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list ARM: dts: vf610-twr: enable i2c0 device ARM: dts: i.MX51: Add one more I2C2 pinmux entry ARM: dts: i.MX51: Move pins configuration under "iomuxc" label ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX ARM: dts: i.MX27: Disable AUDMUX in the template ARM: dts: wandboard: Add support for SDIO bcm4329 ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template ARM: dts: imx53-qsb: Make USBH1 functional ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module ARM: dts: imx6qdl-sabresd: Add touchscreen support ARM: imx: add ocram clock for imx53 ARM: dts: imx: ocram size is different between imx6q and imx6dl ARM: dts: imx27-phytec-phycore-som: Fix regulator settings ARM: dts: i.MX27: Remove clock name from CPU node ...
2013-09-06Merge tag 'dt-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "Device tree and bindings updates for 3.12. General additions of various on-chip and on-board peripherals on various platforms as support gets added. Some of the bigger changes are: - Addition of (new) PCI-e support on Tegra. - More Tegra4 support, including PMC configuration for Dalmore. - Addition of a new board for Exynos4 (trats2) and more bindings for 4x12 IP. - Addition of Allwinner A20 and A31 SoC and board files. - Move of the ST Ericsson device tree files to now use ste-* prefix. - More move of hardware description of shmobile platforms to DT. - Two new board dts files for Freescale MXs" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (177 commits) dts: Rename DW APB timer compatible strings dts: Deprecate ALTR as a vendor prefix of: add vendor prefix for Altera Corp. ARM: at91/dt: sam9x5ek: add sound configuration ARM: at91/dt: sam9x5ek: enable SSC ARM: at91/dt: sam9x5ek: add WM8731 codec ARM: at91/dt: sam9x5: add SSC DMA parameters ARM: at91/dt: add at91rm9200 PQFP package version ARM: at91: at91rm9200: set default mmc0 pinctrl-names ARM: at91: at91sam9n12: correct pin number of gpio-key ARM: at91: at91sam9n12: add qt1070 support ARM: at91: at91sam9n12: add pinctrl of TWI ARM: at91: Add PMU support for sama5d3 ARM: at91: at91sam9260: add missing pinctrl-names on mmc ARM: tegra: configure power off for Dalmore ARM: DT: binding fixup to align with vendor-prefixes.txt (DT) ARM: dts: add sdio blocks to bcm28155-ap board ARM: dts: align sdio numbers to HW definition ARM: sun7i: Add Olimex A20-Olinuxino-Micro support ARM: sun7i: Add Allwinner A20 DTSI ...
generated by cgit v1.2.3 (git 2.0.4) at 2026-05-27 13:44:13 +0000