summaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Expand)Author
2014-02-09ARM: dts: mxs: add mxs phy controller idPeter Chen
2014-02-09ARM: dts: imx27-phytec-phycore-rdk: Add pinctrl definitions for WEIMAlexander Shiyan
2014-02-09ARM: dts: imx27-phytec-phycore-rdk: Add pingrp for SDHCAlexander Shiyan
2014-02-09ARM: dts: imx27-phytec-phycore-som: Add spi-cs-high property to PMICAlexander Shiyan
2014-02-09ARM: dts: imx27-phytec-phycore-rdk: Enable 1-Wire moduleAlexander Shiyan
2014-02-09ARM: dts: imx27-phytec-phycore-som: Add NFC pin groupAlexander Shiyan
2014-02-09ARM: dts: Add support for the i.MX35.Steffen Trumtrar
2014-02-09ARM: dts: mxs: Add iio-hwmon to mx23 socAlexandre Belloni
2014-02-09ARM: dts: mxs: Add iio-hwmon to mx28 socAlexandre Belloni
2014-02-09ARM: dts: imx27-phytec-phycore-som: Rename file to .dtsiAlexander Shiyan
2014-02-09ARM: dts: imx27-phytec-phycore-som: Add pinctrl for CSPI1 and GPIOs used on m...Alexander Shiyan
2014-02-09ARM: dts: mxs: add #io-channel-cells to mx28 lradcAlexandre Belloni
2014-02-09ARM: i.MX28: dts: rename usbphy pin namesMichael Grzeschik
2014-02-09ARM: dts: Add support for the cpuimx25 board from Eukrea and its baseboard.Denis Carikli
2014-02-09ARM: mxs: Add support for the eukrea-cpuimx28.Eric BĂ©nard
2014-02-09ARM: dts: mxs: Add a new pin config for the usb0 ID.Denis Carikli
2014-02-09ARM: dts: mxs: Add 18bit pin config for lcdif.Denis Carikli
2014-02-09ARM: dts: imx53: Enable AHCI SATA for imx53-qsbRobert Nelson
2014-02-09ARM: dts: i.MX27: Configure GPIOs as "input" by defaultAlexander Shiyan
2014-02-09ARM: dts: imx27-apf27dev: Add pinctrl for cspi, sdhci, leds and keysGwenhael Goavec-Merou
2014-02-09ARM: dts: apf27dev: Add pwm supportGwenhael Goavec-Merou
2014-02-09ARM: dts: apf28dev: set gpio polarity for usb regulator and pinctrl for regul...Gwenhael Goavec-Merou
2014-02-09ARM: dts: i.MX27 boards: Switch to use standard GPIO and IRQ flags definitionsAlexander Shiyan
2014-02-09ARM: dts: imx27-phytec-phycore-som: Update FEC nodeAlexander Shiyan
2014-02-09ARM: dts: imx27-phytec-phycore-rdk: Add DT node for camera moduleAlexander Shiyan
2014-02-09ARM: dts: imx27-phytec-phycore-som: Add on-flash BBT supportAlexander Shiyan
2014-02-09ARM: dts: imx27: imx27-apf27dev: add pinctrl for cspi, i2c, sdhc and framebufferGwenhael Goavec-Merou
2014-02-09ARM: dts: imx27: imx27-apf27: add pinctrl for fec and uart1Gwenhael Goavec-Merou
2014-02-09ARM: dts: imx51-babbage: Define FEC reset pinAlexander Shiyan
2014-02-09ARM: dts: imx51-babbage: Fix chipselect level for dataflash on spi0.1Alexander Shiyan
2014-02-09ARM: dts: imx28-evk: Run I2C0 at 400kHzFabio Estevam
2014-02-09ARM: dts: imx27-apf27dev: fix display sizeGwenhael Goavec-Merou
2014-02-09ARM: dts: imx27 phycore pinctrlMarkus Pargmann
2014-02-09ARM: dts: imx27 phycore move uart1 to rdkMarkus Pargmann
2014-02-09ARM: dts: imx27 phyCARD-S pinctrlMarkus Pargmann
2014-02-09ARM: dts: imx27 iomux device nodeMarkus Pargmann
2014-02-09ARM: dts: imx53: Enable AHCI SATA for M53EVKMarek Vasut
2014-02-09ARM: dts: imx53: Add AHCI SATA DT nodeMarek Vasut
2014-02-09ARM: dts: i.MX51 boards: Switch to use standard GPIO flags definitionsAlexander Shiyan
2014-02-09ARM: dts: i.MX51: Move usbphy0 node from AIPS1Alexander Shiyan
2014-02-09ARM: dts: cfa10036: Add dr_mode and phy_type properties to the DTMaxime Ripard
2014-02-09ARM: mxs: cfa10049: Add NAU7802 ADCs to the device treeMaxime Ripard
2014-02-09ARM: dts: imx53: Add USB support for M53EVKMarek Vasut
2014-02-09ARM: dts: imx53: Fix backlight for M53EVKMarek Vasut
2014-02-09ARM: dts: imx53: Fix display pinmux for M53EVKMarek Vasut
2014-02-09ARM: imx50: use clock defines in DTS filesLucas Stach
2014-02-09ARM: imx51: use clock defines in DTS filesLucas Stach
2014-02-09ARM: imx53: use clock defines in DTS filesLucas Stach
2014-02-09ARM: dts: imx27 pin functionsMarkus Pargmann
2014-02-09ARM: imx27-apf27dev: Add sdhci supportGwenhael Goavec-Merou