Age | Commit message (Collapse) | Author |
|
Prepare for snapd integration.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
|
|
toradex_4.1-2.0.x-imx-next
Conflicts:
arch/arm/boot/dts/imx7d.dtsi
arch/arm/mach-imx/busfreq-imx.c
arch/arm/mach-imx/imx_rpmsg.c
drivers/mmc/host/sdhci-esdhc-imx.c
Parts moved to:
arch/arm/boot/dts/imx7s.dtsi
Note: This also includes NXP's latest rel_imx_4.1.15_2.1.0_ga.
|
|
* imx/imx_4.1.15_2.0.0_ga: (157 commits)
MLK-14762 ARM: dts: imx6sll-evk: correct gpio pin for lcd power control
MLK-14285-3 usb: phy: mxs: optimize disconnect line condition
MLK-14285-2 usb: chipidea: set mode for usb phy driver
MLK-14285-1 usb: phy: add usb mode for usb_phy
MLK-14747 driver: cpufreq: Correct dc regulator voltage on imx6ull
MLK-14720 epdc: correct WFE setting when bypass legacy process
MLK-13801-02 ARM: dts: Correct the gpt timer clock source on imx6ul/ull/sll
MLK-13801-01 ARM: imx: add gpt_3m clock on imx6sll
MLK-14680 pxp/epdc: add LUT cancellation feature
MLK-14518-2 pxp: set data path for pxp after reset
MLK-14518-1 pxp: initialize pxp according to recommended flow
MLK-14516 epdc: bypass pxp legacy process when there's no transformation
MLK-14369 epdc: sync LUT status to PXP before enable collision detection
MLK-13198 pxp: imx7d: fix error histogram status report issue
MLK-13917 pxp: fix build error for pxp library in user space
MLK-13862-2 epdc/pxp: imx6ull/imx6sll: enhance the LUT cleanup flow to avoid stalling display
MLK-13862-1 epdc/pxp: imx7d: enhance the LUT cleanup flow to avoid stalling display
MLK-14697 ARM: dts: imx: update the setpoint data of imx6sll
MXSCM-266 arm: dts: increase lpddr2 voltage to 1.25V
MXSCM-265: dts: place imx6sxscm dtb files under CONFIG_SOC_IMX6SX
...
|
|
Disable the fusing/one-time-programmable driver by default. It
allows to blow fuses which might make the module unusable with
a simple sysfs write...
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
|
|
Enable Bluetooth as a module by default. This allows to make use
of USB/SDIO based Bluetooth solutions easier.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
|
|
Follow commit 0a0778946a4fd433de7f1ce7dd9da6bfefed5e17 to stay in sync.
The CAAM Secure Memory Keystore Test/Example driver is not used by
most customers and dumps a lot of keys, add it as a module by
default.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
|
SIT tunnels (IPv6 over IPv4) are not often used hence configure
the driver as a module. This also gets rid of the extra network
interface sit0 by default.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
|
Enable ADV7280 decoder for iMX6 modules. ADV7280 and ADV7180 have
same addresses viz. 0x21 respectively, changing the ADV7280 address
to 0x20 would result in a conflict with MAX9526. As a result enable
ADV7280 by default and disable ADV7180.
Signed-off-by: Sanchayan Maity <sanchayan.maity@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
(cherry picked from commit b7798ad9dccd6b1f54a0c1bbbfa3290934dc5d9b)
|
|
Compile USB device classes such as WDM and CDC ACM as modules.
Enable FTDI USB-to-serial adapter chips and serial console which
allows to use USB serial device drivers as a serial console at
boot time. Compile USB driver for GSM and CDMA modems (Option and
others) as a module.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
(cherry picked from commit f8515e706120de1f34a97d263cebbd17b0eaea73)
|
|
Enable RTL8192CU driver to support LM006 USB WiFi adapter.
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
(cherry picked from commit bc45801b17dbf13b5139ad1a5bb1375b85c04933)
|
|
Newer systemd variants need network namespace support for various
services such as systemd-hostnamed or systemd-localed.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
(cherry picked from commit 4bb3acd58f8d2074cd8e7a6ddb914a0954d0906a)
(cherry picked from commit 65cd6dd5b198f9ca2fab48dc5c7db283db19b58c)
|
|
Remove duplicate CONFIG_STMPE_ADC from both defconfigs.
While at it also remove obsolete commented out
CONFIG_NET_VENDOR_ATHEROS being not set on Colibri iMX6.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
(cherry picked from commit 2bc238c55974901ca3078a8e39edaeaa4d9b3d62)
|
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
(cherry picked from commit 979cfdc2dccadf596a658d47d030d5759df47ed4)
|
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
(cherry picked from commit 0c697fcc38f28912cbe33326d1df85d4bd268094)
|
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
(cherry picked from commit 47c017b98ce9359f890363b4095c87235a6f81d6)
(cherry picked from commit f7da5aba0ed4edea7bd0e228d54732e18e4f056d)
|
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
(cherry picked from commit 237e4f7e572a4849fb04582b1616b11573abfe1c)
|
|
Enable extcon USB GPIO support in the default kernel configuration.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
(cherry picked from commit 818344f016b75ca24e904ff5f9a8f4b2235b31e1)
|
|
The WEIM signals are not accessible so remove the driver from the config and
set it to disabled in the device tree.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
(cherry picked from commit 6c2f7b22f5aa9572d35a3ddd7d14b653cf606550)
(cherry picked from commit cc67148debb52395f31dfe8f18ff5afc736a0111)
Conflicts:
arch/arm/configs/apalis_imx6_defconfig
|
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
(cherry picked from commit c093025bb91521b3fac593457f1ab88e81d22c7c)
|
|
Signed-off-by: Daniel Kochmanski <dkochmanski@antmicro.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
(cherry picked from commit 0bd6f13290225efd486da3c5521a458589c0bcf1)
|
|
Fix PCIe operation by disabling RC/EP test mode which according to the
following community forum post is only used on the PCIe EP/RC
validation system and otherwise prevent PCIe from working properly:
https://community.freescale.com/thread/328257
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
(cherry picked from commit 07290f7d9b0c0903b41c8da92a8f52dcfbaf2d66)
|
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
(cherry picked from commit cb08197d9cf1cb95749e67b0e7c6434c024a2eaa)
|
|
Enable the TouchRevolution Fusion 7 and 10 multi-touch controller driver
to be built as a module.
While at it remove NEW_LEDS which is enabled through dependencies.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
(cherry picked from commit 630f2e35efed02a531df03adb2b594f115648e0d)
|
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
(cherry picked from commit 71248634abbc769838b4cc9169a4d61122db3516)
|
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
(cherry picked from commit a2ef18726893be4dd0931e8ece7a1edb323998ae)
|
|
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
(cherry picked from commit 78584b8c5bcf886da19c9c11eb0eb9feae1b3397)
|
|
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
(cherry picked from commit 7dab0a33abd6c0dfcad045adce704f877f4a9aee)
|
|
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
(cherry picked from commit 5595758b65a3347c0e0565c1302817198fa8e833)
|
|
SIT tunnels (IPv6 over IPv4) are not often used hence configure
the driver as a module. This also gets rid of the extra network
interface sit0 by default.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
|
Enable extcon usb gpio support required for usb host/device
switch on Colibri iMX7.
Signed-off-by: Sanchayan Maity <sanchayan.maity@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
(cherry picked from commit fd308ebda1a36660544fd9d64a282b90df9b6cd9)
|
|
Add TouchRevolution's Fusion multi-touch driver and GPIO power
capabilities (useful for custom carrier boards).
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
(cherry picked from commit 0ff849d86eb373afa482b618ce7a8e4101b3f819)
|
|
Synchronized defconfig with Vybrids 4.1 Kernel configuration.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
(cherry picked from commit 0fc29237c87aece7f984d90e8da971edf5dbf8af)
|
|
The CAAM Secure Memory Keystore Test/Example driver is not used by
most customers and dumps a lot of keys, add it as a module by
default.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
(cherry picked from commit b18ad1cf5a5024aeb18f2b5ed2e1b89ed6d9f877)
|
|
Add initial defconfig for Colibri iMX7S/iMX7D.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
(cherry picked from commit b35d568b7428983eb533d88025e37e5e4b61a970)
|
|
Add i.MX6SLL support in imx_v7_mfg_defconfig.
Signed-off-by: Bai Ping <ping.bai@nxp.com>
(cherry picked from commit 2731152035765eb895a7c17ae4fb65b6ba9b2cdf)
|
|
non-ethernet board
At some boards, it has no ethernet support. As an alternative, we can use
USB Ethernet card to support NFS (u-boot supports it too). It supports
AXIS cards which are used most frequently.
This commit is the similar with below mainline commit:
https://git.kernel.org/cgit/linux/kernel/git/peter.chen/usb.git/commit/
?h=peter-usb-dev&id=277ad756ead72845796c4f5430dd345301dc460b
Signed-off-by: Peter Chen <peter.chen@nxp.com>
(cherry picked from commit a480581b61604524e26bc7ee48b8444b5bad9157)
|
|
Enable i.MX6SLL by default.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
(cherry picked from commit db724341c0f2271e120f57c8dee82960e8200e6f)
|
|
Select CONFIG_SND_SIMPLE_CARD driver by default.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
|
|
Enable OOB feature for MX6Q/DL SDB, MX6SL EVK, MX6SX SDB, MX7D SDB boards.
NOTE: The performance optimization option CONFIG_BCM4339 is disabled
by default due to a WiFi driver issue that it breaks MX6SL EVK.
If user want to test performance on the above platforms (except MX6SL EVK),
CONFIG_BCM4339 has to be enabled manually.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
(cherry picked from commit ae55027339431f7d1c4251dd39ac484c9f9f4245)
|
|
Enable DCP driver in imx_v7_defconfig
Signed-off-by: Dan Douglass <dan.douglass@nxp.com>
|
|
Enable the RNG driver in imx_v7_defconfig
Signed-off-by: Dan Douglass <dan.douglass@nxp.com>
|
|
Add the mipi panel 'TFT3P5581' driver.
Signed-off-by: Fancy Fang <chen.fang@nxp.com>
|
|
Set bcmdhd as build in type.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
|
|
Fix the build error for imx_v7_mfg_defconfig.
Signed-off-by: Bai Ping <ping.bai@nxp.com>
|
|
Enable i.MX6ULL in imx_v7_defconfig.
Signed-off-by: Bai Ping <ping.bai@nxp.com>
|
|
The 'otm8018b' is the Source Driver IC which is used
by 'TFT3P5079E' panel. This patch is adding the build
support for the 'otm8018b' kernel driver.
Signed-off-by: Fancy Fang <chen.fang@nxp.com>
|
|
Enabled CAAM in imx_v7_defconfig.
Signed-off-by: Dan Douglass <dan.douglass@nxp.com>
|
|
CONFIG_POWER_RESET_SYSCON_POWEROFF
On v4.1, use syscon-poweroff driver instead of poweroff interface in
rtc-snvs driver.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
|