summaryrefslogtreecommitdiff
path: root/arch/arm/mach-bcm/Kconfig
AgeCommit message (Collapse)Author
2015-11-10Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "New and/or improved SoC support for this release: Marvell Berlin: - Enable standard DT-based cpufreq - Add CPU hotplug support Freescale: - Ethernet init for i.MX7D - Suspend/resume support for i.MX6UL Allwinner: - Support for R8 chipset (used on NTC's $9 C.H.I.P board) Mediatek: - SMP support for some platforms Uniphier: - L2 support - Cleaned up SMP support, etc. plus a handful of other patches around above functionality, and a few other smaller changes" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits) ARM: uniphier: rework SMP operations to use trampoline code ARM: uniphier: add outer cache support Documentation: EXYNOS: Update bootloader interface on exynos542x ARM: mvebu: add broken-idle option ARM: orion5x: use mac_pton() helper ARM: at91: pm: at91_pm_suspend_in_sram() must be 8-byte aligned ARM: sunxi: Add R8 support ARM: digicolor: select pinctrl/gpio driver arm: berlin: add CPU hotplug support arm: berlin: use non-self-cleared reset register to reset cpu ARM: mediatek: add smp bringup code ARM: mediatek: enable gpt6 on boot up to make arch timer working soc: mediatek: Fix random hang up issue while kernel init soc: ti: qmss: make acc queue support optional in the driver soc: ti: add firmware file name as part of the driver Documentation: dt: soc: Add description for knav qmss driver ARM: S3C64XX: Use PWM lookup table for mach-smartq ARM: S3C64XX: Use PWM lookup table for mach-hmt ARM: S3C64XX: Use PWM lookup table for mach-crag6410 ARM: S3C64XX: Use PWM lookup table for smdk6410 ...
2015-10-21ARM: cygnus: fix link failures when CONFIG_COMMON_CLK_IPROC is disabledArnd Bergmann
When CONFIG_CYGNUS is set but CONFIG_COMMON_CLK_IPROC is disabled, the following link failures are caused: drivers/built-in.o: In function `cygnus_armpll_init': :(.init.text+0x1d290): undefined reference to `iproc_armpll_setup' drivers/built-in.o: In function `cygnus_genpll_clk_init': :(.init.text+0x1d2c4): undefined reference to `iproc_pll_clk_setup' drivers/built-in.o: In function `cygnus_lcpll0_clk_init': :(.init.text+0x1d304): undefined reference to `iproc_pll_clk_setup' drivers/built-in.o: In function `cygnus_mipipll_clk_init': :(.init.text+0x1d344): undefined reference to `iproc_pll_clk_setup' drivers/built-in.o: In function `cygnus_asiu_init': :(.init.text+0x1d370): undefined reference to `iproc_asiu_setup' It is fixed it by always selecting COMMON_CLK_IPROC from ARCH_BCM_IPROC, and making COMMON_CLK_IPROC a silent option (thus preventing it from being erroneously disabled by a user). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jon Mason <jonmason@broadcom.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-09-14soc: add stubs for brcmstb SoC'sBrian Norris
Used on BCM7xxx Set-Top Box chips (e.g., BCM7445). Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-09-14ARM: NSP: Add basic support for Broadcom Northstar Plus SoCJon Mason
Broadcom Northstar Plus family of SoCs are used for switching control and management applications as well as residential router/gateway applications. The SoC features dual core Cortex A9 ARM CPUs, integrating several peripheral interfaces including multiple Gigabit Ethernet PHYs, DDR3 memory, PCIE Gen-2, USB 2.0 and USB 3.0, serial and NAND flash, SATA and several other IO controllers. Signed-off-by: Kapil Hali <kapilh@broadcom.com> Signed-off-by: Jon Mason <jonmason@broadcom.com> Acked-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-08-11ARM: brcmstb: select ARCH_DMA_ADDR_T_64BIT for LPAEGregory Fong
Broadcom STB (BRCMSTB) has some 64-bit capable DMA and therefore needs dma_addr_t to be a 64-bit size. One user is the Broadcom SATA3 AHCI controller driver. Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-11ARM: BCM: Enable ARM erratum 798181 for BRCMSTBGregory Fong
Commit 04fcab32d3fa1d3f6afe97e0ab431c5572e07a2c ("ARM: 8111/1: Enable erratum 798181 for Broadcom Brahma-B15") enables this erratum for affected Broadcom Brahma-B15 CPUs when CONFIG_ARM_ERRATA_798181=y. Let's make sure that config option is actually set. Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-01ARM: BCM: Do not select CONFIG_MTD_NAND_BRCMNANDFlorian Fainelli
This reverts 7dc95b40f599293aedf30432749ad25b51549041 ("ARM: BCM: Enable NAND support for iProc SoCs") since it creates an unmet dependency for MTD_NAND_BRCMNAND which depends on MTD and MTD_NAND, this results in the following build failure for brcmnand: LD init/built-in.o drivers/built-in.o: In function `brcmnand_remove': /home/fainelli/dev/linux/drivers/mtd/nand/brcmnand/brcmnand.c:2234: undefined reference to `nand_release' drivers/built-in.o: In function `brcmnand_init_cs': /home/fainelli/dev/linux/drivers/mtd/nand/brcmnand/brcmnand.c:1933: undefined reference to `nand_scan_ident' /home/fainelli/dev/linux/drivers/mtd/nand/brcmnand/brcmnand.c:1958: undefined reference to `nand_scan_tail' Makefile:931: recipe for target 'vmlinux' failed make: *** [vmlinux] Error 1 Instead, select this driver an all dependencies on the multi_v7_defconfig. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2015-05-29ARM: brcmstb: Select ARCH_WANT_OPTIONAL_GPIOLIBGregory Fong
Select ARCH_WANT_OPTIONAL_GPIOLIB from BRCMSTB to allow GPIOLIB and GPIO_BRCMSTB to be enabled. Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-05-28ARM: BCM: Enable NAND support for iProc SoCsRay Jui
Select CONFIG_MTD_NAND_BRCMNAND for all iProc SoCs Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-02-18ARM: BCM: put back ARCH_MULTI_V7 dependency for mobileArnd Bergmann
A recent cleanup rearranged the Kconfig file for mach-bcm and accidentally dropped the dependency on ARCH_MULTI_V7, which makes it possible to now build the two mobile SoC platforms on an ARMv6-only kernel, resulting in a log of Kconfig warnings like warning: ARCH_BCM_MOBILE selects ARM_ERRATA_775420 which has unmet direct dependencies (CPU_V7) and which of course cannot work on any machine. This puts back the dependencies as before. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 64e74aa788f99 ("ARM: mach-bcm: ARCH_BCM_MOBILE: remove one level of menu from Kconfig") Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Scott Branden <sbranden@broadcom.com>
2014-12-10Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq core updates from Thomas Gleixner: "This is the first (boring) part of irq updates: - support for big endian I/O accessors in the generic irq chip - cleanup of brcmstb/bcm7120 drivers so they can be reused for non ARM SoCs - the usual pile of fixes and updates for the various ARM irq chips" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) irqchip: dw-apb-ictl: Add PM support irqchip: dw-apb-ictl: Enable IRQ_GC_MASK_CACHE_PER_TYPE irqchip: dw-apb-ictl: Always use use {readl|writel}_relaxed ARM: orion: convert the irq_reg_{readl,writel} calls to the new API irqchip: atmel-aic: Add missing entry for rm9200 irq fixups irqchip: atmel-aic: Rename at91sam9_aic_irq_fixup for naming consistency irqchip: atmel-aic: Add specific irq fixup function for sam9g45 and sam9rl irqchip: atmel-aic: Add irq fixups for at91sam926x SoCs irqchip: atmel-aic: Add irq fixup for RTT block irqchip: brcmstb-l2: Convert driver to use irq_reg_{readl,writel} irqchip: bcm7120-l2: Convert driver to use irq_reg_{readl,writel} irqchip: bcm7120-l2: Decouple driver from brcmstb-l2 irqchip: bcm7120-l2: Extend driver to support 64+ bit controllers irqchip: bcm7120-l2: Use gc->mask_cache to simplify suspend/resume functions irqchip: bcm7120-l2: Fix missing nibble in gc->unused mask irqchip: bcm7120-l2: Make sure all register accesses use base+offset irqchip: bcm7120-l2, brcmstb-l2: Remove ARM Kconfig dependency irqchip: bcm7120-l2: Eliminate bad IRQ check irqchip: brcmstb-l2: Eliminate dependency on ARM code genirq: Generic chip: Add big endian I/O accessors ...
2014-11-20Merge tag 'arm-soc/for-3.19/cygnus-platform-v2' of ↵Arnd Bergmann
http://github.com/brcm/linux into next/soc Pull "Broadcom Cygnus SoC platform support" from Florian Fainelli: This pull request contains the platform code to support the Broadcom Cygnus SoC using the iProc architecture: - add support for the Broadcom Cygnus SoC - consolidate the BCM5301X Kconfig options under the iProc menuconfig entry - remove one level of menu in menuconfig * tag 'arm-soc/for-3.19/cygnus-platform-v2' of http://github.com/brcm/linux: ARM: mach-bcm: ARCH_BCM_MOBILE: remove one level of menu from Kconfig ARM: mach-bcm: Consolidate currently supported IPROC SoCs ARM: cygnus: Initial support for Broadcom Cygnus SoC Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-11ARM: mach-bcm: ARCH_BCM_MOBILE: remove one level of menu from KconfigScott Branden
remove menu "Broadcom Mobile SoC Selection" This requires: - selecting ARCH_BCM_MOBILE based on SoC selections - fixup bcm_defconfig and multi_v7_defconfig to work with new menu levels. Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2014-11-11ARM: mach-bcm: Consolidate currently supported IPROC SoCsScott Branden
Move ARCH_BCM_5301X subarch under ARCH_IPROC architecture. Additional IPROC chipsets that share a lot of commonality should be added under ARCH_IPROC as well. Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2014-11-11ARM: cygnus: Initial support for Broadcom Cygnus SoCJonathan Richardson
Adds initial support for the Cygnus SoC based on Broadcom’s iProc series. Reviewed-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Desmond Liu <desmondl@broadcom.com> Reviewed-by: JD (Jiandong) Zheng <jdzheng@broadcom.com> Tested-by: Jonathan Richardson <jonathar@broadcom.com> Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2014-11-09irqchip: bcm7120-l2: Decouple driver from brcmstb-l2Kevin Cernekee
Some chips, such as BCM6328, only require bcm7120-l2. Some BCM7xxx STB configurations only require brcmstb-l2. Treat them as two separate entities, and update the mach-bcm dependencies to reflect the change. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lkml.kernel.org/r/1415342669-30640-13-git-send-email-cernekee@gmail.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-10-20ARM: brcmstb: Kconfig: drop unneeded symbol selectionsBrian Norris
These are either implied or not necessary. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2014-09-17ARM: BCM63XX: add basic support for the Broadcom BCM63138 DSL SoCFlorian Fainelli
This patch adds basic support for the Broadcom BCM63138 DSL SoC which is using a dual-core Cortex A9 system. Add the very minimum required code boot Linux on this SoC. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2014-07-28ARM: brcmstb: select GISB arbiter and interrupt driversBrian Norris
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-07-28ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCsMarc Carino
The BCM7xxx series of Broadcom SoCs are used primarily in set-top boxes. This patch adds machine support for the ARM-based Broadcom SoCs. Signed-off-by: Marc Carino <marc.ceeeee@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-07-28ARM: add SMP support for Broadcom mobile SoCsAlex Elder
This patch adds SMP support for BCM281XX and BCM21664 family SoCs. This feature is controlled with a distinct config option such that an SMP-enabled multi-v7 binary can be configured to run these SoCs in uniprocessor mode. Since this SMP functionality is used for multiple Broadcom mobile chip families the config option is called ARCH_BCM_MOBILE_SMP (for lack of a better name). On SoCs of this type, the secondary core is not held in reset on power-on. Instead it loops in a ROM-based holding pen. To release it, one must write into a special register a jump address whose low-order bits have been replaced with a secondary core's id, then trigger an event with SEV. On receipt of an event, the ROM code will examine the register's contents, and if the low-order bits match its cpu id, it will clear them and write the value back to the register just prior to jumping to the address specified. The location of the special register is defined in the device tree using a "secondary-boot-reg" property in a node whose "enable-method" matches. Derived from code originally provided by Ray Jui <rjui@broadcom.com> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-06-17ARM: use menuconfig for sub-arch menusRob Herring
The System Type menu is getting quite long with platforms and is inconsistent in handling of sub-arch specific options. Tidy up the menu by making platform options a menuconfig entry containing any platform specific config items. [arnd: change OMAP part according to suggestion from Tony Lindgren <tony@atomide.com>] Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-06-02Merge tag 'soc-for-3.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next Pull part one of ARM SoC updates from Olof Johansson: "A quite large set of SoC updates this cycle. In no particular order: - Multi-cluster power management for Samsung Exynos, adding support for big.LITTLE CPU switching on EXYNOS5 - SMP support for Marvell Armada 375 and 38x - SMP rework on Allwinner A31 - Xilinx Zynq support for SOC_BUS, big endian - Marvell orion5x platform cleanup, modernizing the implementation and moving to DT. - _Finally_ moving Samsung Exynos over to support MULTIPLATFORM, so that their platform can be enabled in the same kernel binary as most of the other v7 platforms in the tree. \o/ The work isn't quite complete, there's some driver fixes still needed, but the basics now work. New SoC support added: - Freescale i.MX6SX - LSI Axxia AXM55xx SoCs - Samsung EXYNOS 3250, 5260, 5410, 5420 and 5800 - STi STIH407 plus a large set of various smaller updates for different platforms. I'm probably missing some important one here" * tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (281 commits) ARM: exynos: don't run exynos4 l2x0 setup on other platforms ARM: exynos: Fix "allmodconfig" build errors in mcpm and hotplug ARM: EXYNOS: mcpm rename the power_down_finish ARM: EXYNOS: Enable mcpm for dual-cluster exynos5800 SoC ARM: EXYNOS: Enable multi-platform build support ARM: EXYNOS: Consolidate Kconfig entries ARM: EXYNOS: Add support for EXYNOS5410 SoC ARM: EXYNOS: Support secondary CPU boot of Exynos3250 ARM: EXYNOS: Add Exynos3250 SoC ID ARM: EXYNOS: Add 5800 SoC support ARM: EXYNOS: initial board support for exynos5260 SoC clk: exynos5410: register clocks using common clock framework ARM: debug: qcom: add UART addresses to Kconfig help for APQ8084 ARM: sunxi: allow building without reset controller Documentation: devicetree: arm: sort enable-method entries ARM: rockchip: convert smp bringup to CPU_METHOD_OF_DECLARE clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks ARM: dts: axxia: Add reset controller power: reset: Add Axxia system reset driver ARM: axxia: Adding defconfig for AXM55xx ...
2014-05-29ARM: kconfig: allow PCI support to be selected with ARCH_MULTIPLATFORMWill Deacon
When targetting ARCH_MULTIPLATFORM, we may include support for SoCs with PCI-capable devices (e.g. mach-virt with virtio-pci). This patch allows PCI support to be selected for these SoCs by selecting CONFIG_MIGHT_HAVE_PCI when CONFIG_ARCH_MULTIPLATFORM=y and removes the individual selections from multi-platform enabled SoCs. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-24Merge tag 'for-3.16/bcm-soc' of git://github.com/broadcom/mach-bcm into next/socArnd Bergmann
Merge "mach-bcm 3.16 soc updates" From Matt Porter: * only show ARCH_BCM in multi v6/v7 configs * enable ARM erratum 775420 * bcm_defconfig updates for pwm * tag 'for-3.16/bcm-soc' of git://github.com/broadcom/mach-bcm: ARM: bcm_defconfig: Enable PWM and Backlight ARM: mach-bcm: add ARM_ERRATA_775420 ARM: bcm: Restrict ARCH_BCM selection to ARCH_MULTI_V6_V7 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-05-24Merge branch 'bcm/cleanup' into next/socArnd Bergmann
Conflicts: arch/arm/mach-bcm/Kconfig
2014-05-24Merge tag 'for-3.16/bcm-cleanup' of git://github.com/broadcom/mach-bcm into ↵Arnd Bergmann
next/cleanup * Clean up mach-bcm config and build targets * Clean up bcm281xx/21664 SMC code * Clean up bcm281xx/21664 L2C code * tag 'for-3.16/bcm-cleanup' of git://github.com/broadcom/mach-bcm: ARM: bcm: rename "kona.h" and "kona.c" ARM: bcm: rewrite commentary for bcm_kona_do_smc() ARM: bcm: use inline assembly for "smc" request ARM: bcm: tidy up a few includes ARM: bcm: config option for l2 cache support ARM: bcm: don't special-case CPU 0 in bcm_kona_smc() ARM: bcm: have bcm_kona_smc() return request result ARM: bcm: clean up SMC code ARM: bcm: err, don't BUG() on SMC init failures ARM: bcm: use memory accessors for ioremapped area ARM: bcm: clean up config and build targets Signed-off-by: Arnd Bergmann <arnd@arndb.de> Conflicts: arch/arm/mach-bcm/Kconfig
2014-04-25ARM: mach-bcm: add ARM_ERRATA_775420Scott Branden
ARM_ERRATA_775420 needs to be enabled. A data cache maintenance operation which aborts, followed by an ISB, without any DSB in-between, might lead to deadlock. Affects: bug present in Cortex-A9 r3p0 and earlier. Fixed in r4p0. Cortex-A9 r3p0 is used in a multitude of Broadcom parts including the bcm21664, bcm281xx, 5301x families of devices. Signed-off-by: Scott Branden <sbranden@broadcom.com> Tested-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-04-25ARM: bcm: Restrict ARCH_BCM selection to ARCH_MULTI_V6_V7Alexander Shiyan
Currently, Broadcom SoC options are shown whenever ARCH_MULTIPLATFORM is enabled. Restrict this so they are only seen when ARCH_MULTI_V6_V7 variants are enabled. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> [mporter: added commit log message] Signed-off-by: Matt Porter <mporter@linaro.org>
2014-04-25ARM: bcm: config option for l2 cache supportAlex Elder
Add a new config option ARCH_BCM_MOBILE_L2_CACHE that allows support for level-2 cache to be enabled or disabled at build time for BCM218XX and BCM21664 family SoCs. Build support for SMC only if it's required (currently it's only required for to support level 2 cache control). If arch/arm/mach-bcm/kona.c gets compiled, ARCH_BCM_MOBILE_L2_CACHE must have been selected, which implies CONFIG_CACHE_L2X0 is set. There is therefore no need to check CONFIG_CACHE_L2X0 at the top of kona_l2_cache_init(), so get rid of that check. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-04-25ARM: bcm: clean up config and build targetsAlex Elder
Currently CONFIG_ARCH_BCM_MOBILE is used to select all (both) Broadcom mobile SoC families. Instead, use that only as a config menu switch, and define specific symbols like ARCH_BCM_281XX to select a particular SoC family. If ARCH_BCM_MOBILE is selected, all of the SoCs will be selected by default, but this way each can be disabled individually as well. Note that BCM281xx and BCM21664 both require the SMC and L2 cache control code, so that code will be built based on ARCH_BCM_MOBILE. Signed-off-by: Alex Elder <elder@linaro.org> [mporter: added ARM: to the description] Signed-off-by: Matt Porter <mporter@linaro.org>
2014-04-22ARM: bcm: clean-up unneeded kconfig selectsRob Herring
Multi-platform support implies all these options are already selected and individual platforms don't need to select them. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Christian Daudt <bcm@fixthebug.org> Cc: Matt Porter <mporter@linaro.org> Cc: bcm-kernel-feedback-list@broadcom.com
2014-04-05Merge tag 'soc-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC specific changes from Arnd Bergmann: "Lots of changes specific to one of the SoC families. Some that stick out are: - mach-qcom gains new features, most importantly SMP support for the newer chips (Stephen Boyd, Rohit Vaswani) - mvebu gains support for three new SoCs: Armada 375, 380 and 385 (Thomas Petazzoni and Free-electrons team) - SMP support for Rockchips (Heiko Stübner) - Lots of i.MX changes (Shawn Guo) - Added support for BCM5301x SoC (Hauke Mehrtens) - Multiplatform support for Marvell Kirkwood and Dove (Andrew Lunn and Sebastian Hesselbarth doing the final part of a long journey) - Unify davinci platforms and remove obsolete ones (Sekhar Nori, Arnd Bergmann)" * tag 'soc-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (126 commits) ARM: sunxi: Select HAVE_ARM_ARCH_TIMER ARM: cache-tauros2: remove ARMv6 code ARM: mvebu: don't select CONFIG_NEON ARM: davinci: fix DT booting with default defconfig ARM: configs: bcm_defconfig: enable bcm590xx regulator support ARM: davinci: remove tnetv107x support MAINTAINERS: Update ARM STi maintainers ARM: restrict BCM_KONA_UART to ARCH_BCM_MOBILE ARM: bcm21664: Add board support. ARM: sunxi: Add the new watchog compatibles to the reboot code ARM: enable ARM_HAS_SG_CHAIN for multiplatform ARM: davinci: remove da8xx_omapl_defconfig ARM: davinci: da8xx: fix multiple watchdog device registration ARM: davinci: add da8xx specific configs to davinci_all_defconfig ARM: davinci: enable da8xx build concurrently with older devices ARM: BCM5301X: workaround suppress fault ARM: BCM5301X: add early debugging support ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU ARM: mach-bcm: Remove GENERIC_TIME ARM: shmobile: APMU: Fix warnings due to improper printk formats ...
2014-03-11Merge tag 'bcm2835-for-3.15-soc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi into next/cleanup Merge "ARM: bcm2835: consolidate into mach-bcm/" from Stephen Warren: This pull request consists of a single patch which moves files from arch/arm/mach-bcm2835 into mach-bcm, thus consolidating them with support for other Broadcom chips. * tag 'bcm2835-for-3.15-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi: ARM: bcm2835: Move to mach-bcm directory Signed-off-by: Olof Johansson <olof@lixom.net>
2014-03-11Merge tag 'armsoc/for-3.15/soc-2' of git://github.com/broadcom/mach-bcm into ↵Olof Johansson
next/soc Merge "ARM: mach-bcm soc updates" from Matt Porter: - add BCM5301x support - remove GENERIC_TIME * tag 'armsoc/for-3.15/soc-2' of git://github.com/broadcom/mach-bcm: ARM: BCM5301X: workaround suppress fault ARM: BCM5301X: add early debugging support ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU ARM: mach-bcm: Remove GENERIC_TIME Signed-off-by: Olof Johansson <olof@lixom.net>
2014-03-06ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPUHauke Mehrtens
This patch adds support for the BCM5301X/BCM470X SoCs with an ARM CPUs. Currently just booting to a shell is working and nothing else, no Ethernet, wifi, flash, ... I have some pending patches to make Ethernet work for this device. Mostly device tree support for bcma is missing. This SoC is used in small office and home router with Broadcom SoCs it's internal name is Northstar. This code should support the BCM4707, BCM4708, BCM4709, BCM53010, BCM53011 and BCM53012 SoC. It uses one or two ARM Cortex A9 Cores, some highlights are 2 PCIe 2.0 controllers, 4 Gigabit Ethernet MACs and a USB 3.0 host controller. This SoC uses a dual core CPU, but this is currently not implemented. More information about this SoC can be found here: http://www.anandtech.com/show/5925/broadcom-announces-bcm4708x-and-bcm5301x-socs-for-80211ac-routers Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christian Daudt <bcm@fixthebug.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-03-06ARM: mach-bcm: Remove GENERIC_TIMERichard Weinberger
The symbol is an orphan, get rid of it. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Christian Daudt <bcm@fixthebug.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-24ARM: bcm2835: Move to mach-bcm directoryMarkus Mayer
Move the bcm2835 board file into the mach-bcm directory. This allows us to get rid of the mach-bcm2835 directory with the associated Kconfig and Makefile. Signed-off-by: Markus Mayer <markus.mayer@linaro.org> [swarren, adjust defconfig so ARCH_BCM2835 still gets enabled] Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2014-02-19ARM: centralize common multi-platform kconfig optionsRob Herring
Multi-platform requires various kconfig options to be selected, so platforms don't need to select them individually. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-01-16ARM: pinctrl: Add Broadcom Capri pinctrl driverSherman Yin
Adds pinctrl driver for Broadcom Capri (BCM281xx) SoCs. v4: - PINCTRL selected in Kconfig, PINCTRL_CAPRI selected in bcm_defconfig - make use of regmap - change CAPRI_PIN_UPDATE from macro to inline function. - Handle pull-up strength arg in Ohm instead of enum v3: Re-work driver to be based on generic pin config. Moved config selection from Kconfig to bcm_defconfig. v2: Use hyphens instead of underscore in DT property names. Signed-off-by: Sherman Yin <syin@broadcom.com> Reviewed-by: Christian Daudt <bcm@fixthebug.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-29ARM: bcm281xx: Add ARCH Timers to configChristian Daudt
Add HAVE_ARM_ARCH_TIMER to Broadcom Kconfig as it is required for some Mobile SoCs. Signed-off-by: Christian Daudt <bcm@fixthebug.org> Reviewed-by: Markus Mayer <mmayer@broadcom.com> Reviewed-by: Mark Hambleton <mahamble@broadcom.com> Reviewed-by: James King <jamesk@broadcom.com>
2013-10-29rename ARCH_BCM to ARCH_BCM_MOBILE (mach-bcm)Christian Daudt
Currently ARCH_BCM has been used for Broadcom Mobile V7 based SoCs. In order to allow other Broadcom SoCs to also use mach-bcm directory and files, this patch renames the original ARCH_BCM to ARCH_BCM_MOBILE, and uses ARCH_BCM to define any Broadcom chip residing in mach-bcm directory. Signed-off-by: Christian Daudt <bcm@fixthebug.org> Acked-by: Olof Johansson <olof@lixom.net> Changes from v2: - switch ARCH_MULTIPLATFORM from select to depends - remove 'default y' from BCM_MOBILE Changes from v1: - fix alpha ordering in dts/Makefile - break into 4 patches for separate subsys
2013-10-01ARM: bcm281xx: Enable GPIO driverMarkus Mayer
Turn on the bcm281xx GPIO driver in the kernel configuration. Signed-off-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Christian Daudt <csd@broadcom.com>
2013-08-06ARM: bcm281xx: Turn on L2 cache.Markus Mayer
Turning on the L2 cache for the bcm281xx family. Signed-off-by: Markus Mayer <markus.mayer@linaro.org> Acked-by: Christian Daudt <csd@broadcom.com>
2013-03-28ARM: bcm281xx: Add timer driver (driver portion)Christian Daudt
This adds support for the Broadcom timer, used in the following SoCs: BCM11130, BCM11140, BCM11351, BCM28145, BCM28155 Updates from V6: - Split DT portion into a separate patch Updates from V5: - Rebase to latest arm-soc/for-next Updates from V4: - Switch code to use CLOCKSOURCE_OF_DECLARE Updates from V3: - Migrate to 3.9 timer framework updates Updates from V2: - prepend static fns + fields with kona_ Updates from V1: - Rename bcm_timer.c to bcm_kona_timer.c - Pull .h into bcm_kona_timer.c - Make timers static - Clean up comment block - Switched to using clockevents_config_and_register - Added an error to the get_timer loop if it repeats too much - Added to Documentation/devicetree/bindings/arm/bcm/bcm,kona-timer.txt - Added missing readl to timer_disable_and_clear Note: bcm,kona-timer was kept as the 'compatible' field to make it specific enough for when there are multiple bcm timers (bcm,timer is too generic). Signed-off-by: Christian Daudt <csd@broadcom.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-01-22ARM: remove redundant 'select GENERIC_GPIO'Shawn Guo
In drivers/gpio/Kcong, ARCH_REQUIRE_GPIOLIB selects GPIOLIB which in turn selects GENERIC_GPIO. So GENERIC_GPIO will be selected automatically for those platforms that select ARCH_REQUIRE_GPIOLIB. Remove the redundant 'select GENERIC_GPIO' for platforms that already select ARCH_REQUIRE_GPIOLIB at either mach or plat level. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-19Add support for generic BCM SoC chipsetsChristian Daudt
In order to start upstreaming Broadcom SoC support, create a starting hierarchy, arch and dts files. The first support SoC family that is planned is the BCM281XX (BCM11130/11140/11351/28145/28155) family of dual A9 mobile SoC cores. This code is just the skeleton code for get the machine upstreamed. It has been made MULTIPLATFORM compatible. Next steps ---------- Upstream a basic set of drivers - sufficient for a console boot to ramdisk. These will includer timer, gpio, i2c drivers. After this basic set, we will proceed with a more comprehensive set of drivers for the 281XX SoC family. v2 patch mods -------- - Remove l2x0_of_init call as there were problems with the code. A separate patch will be submitted with cache init code - Rename capri files and refs to bcm281xx-based names - Add bcm281xx binding doc - various misc cleanups v3 patch mods ------------- - Remove extra #include lines - Remove remaining references to capri - dt uart chipset string added - cleaned up chip # references v4 patch mods ------------- - swap order of compatible definitions for uart - fix typo v5 patch mods ------------- - Rename bcm281xx to bcm11351 in dts+code, leaving references to bcm281xx only in help+comments. v6 patch mods ------------- - fix typo in uart 'compatible' string Signed-off-by: Christian Daudt <csd@broadcom.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>