summaryrefslogtreecommitdiff
path: root/arch/arm/mach-davinci/board-da830-evm.c
AgeCommit message (Collapse)Author
2016-11-28ARM: davinci: da830-evm: use gpio descriptor for mmc pinsAxel Haslam
Currently the mmc driver is polling the gpio to know if the card was removed. By using a gpio descriptor instead of the platform callbacks, the driver will be able to register the gpio using the mmc core APIs designed for this purpose. This has the advantage that an irq will be registered, and polling is no longer needed. Also, a dependency on platform callbacks is removed for this board. Signed-off-by: Axel Haslam <ahaslam@baylibre.com> [nsekhar@ti.com: minor commit message edit] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-11-01ARM: davinci: da8xx: add usb phy clocksDavid Lechner
Up to this point, the USB phy clock configuration was handled manually in the board files and in the usb drivers. This adds proper clocks so that the usb drivers can use clk_get and clk_enable and not have to worry about the details. Also, the related code is removed from the board files and replaced with the new clock registration functions. This also removes the #if IS_ENABLED(CONFIG_USB_MUSB_HDRC) around the musb declaration and renames the musb platform device so that we can reference it from the usb20 clock even if the musb device is not used. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Axel Haslam <ahaslam@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-10-31ARM: davinci: da8xx: Add USB PHY platform deviceDavid Lechner
There is now a proper phy driver for the DA8xx SoC USB PHY. This adds the platform device declarations needed to use it. Signed-off-by: David Lechner <david@lechnology.com> [nsekhar@ti.com: keep usb-davinci.h included in board-da830-evm.c minor subject line adjustment] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-10-31ARM: davinci: da8xx: Add full regulator constraints for non-DT bootAxel Haslam
The phy framework requests an optional "phy" regulator. If it does not find one, it returns -EPROBE_DEFER. In the case of non-DT boot for the omap138-lcdk board, this would prevent the usb11 phy to probe correctly and ohci would not enumerate. By calling regulator_has_full_constraints(), An error would be returned instead of -EPROBE_DEFER for the regulator, and the probe of the phy driver can continue normally without a regulator. Signed-off-by: Axel Haslam <ahaslam@baylibre.com> [nsekhar@ti.com: minor commit message updates] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-10-31ARM: davinci: da8xx: Add CFGCHIP syscon platform deviceDavid Lechner
The CFGCHIP registers are used by a number of devices, so use a syscon device to share them. The first consumer of this will be the phy-da8xx-usb driver. Add the syscon device and register it. Signed-off-by: David Lechner <david@lechnology.com> [nsekhar@ti.com: minor commit message fixes] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-10-31ARM: davinci: da8xx: Remove duplicated definesAlexandre Bailon
Some macro for DA8xx CFGCHIP are defined in usb-davinci.h, but da8xx-cfgchip.h intend to replace them. Remove duplicated defines between da8xx-cfgchip.h and usb-davinci.h Signed-off-by: Alexandre Bailon <abailon@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-12-01ARM: davinci: make headers more localArnd Bergmann
Some header files are never included outside of a mach-davinci directory and do not need to be made visible in include/mach, so let's just move them all down one level. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sekhar Nori <nsekhar@ti.com>
2014-11-18ARM: davinci: Use standard logging stylesJoe Perches
Convert printks to pr_<level> and pr_warning to pr_warn. Other miscellanea: o Coalesce formats o Realign arguments o Use %s, __func__ instead of embedded function names o Add pr_fmt to mityomapl138 and mux Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2014-02-23ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemifIvan Khoronzhuk
The problem that the set timings code contains the call of Davinci platform function davinci_aemif_setup_timing() which is not accessible if kernel is built for another platform like Keystone. The Keysone platform is going to use TI AEMIF driver. If TI AEMIF is used we don't need to set timings and bus width. It is done by AEMIF driver. To get rid of davinci-nand driver dependency on aemif platform code we moved aemif code to davinci platform. The platform AEMIF code (aemif.c) has to be removed once Davinci will be converted to DT and use ti-aemif.c driver. Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> [nsekhar@ti.com: fixed checkpatch error and a build breakage due to missing include, rebased onto l2-mtd/master] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-11-18Merge branch 'i2c/for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c changes from Wolfram Sang: - new drivers for exynos5, bcm kona, and st micro - bigger overhauls for drivers mxs and rcar - typical driver bugfixes, cleanups, improvements - got rid of the superfluous 'driver' member in i2c_client struct This touches a few drivers in other subsystems. All acked. * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits) i2c: bcm-kona: fix error return code in bcm_kona_i2c_probe() i2c: i2c-eg20t: do not print error message in syslog if no ACK received i2c: bcm-kona: Introduce Broadcom I2C Driver i2c: cbus-gpio: Fix device tree binding i2c: wmt: add missing clk_disable_unprepare() on error i2c: designware: add new ACPI IDs i2c: i801: Add Device IDs for Intel Wildcat Point-LP PCH i2c: exynos5: Remove incorrect clk_disable_unprepare i2c: i2c-st: Add ST I2C controller i2c: exynos5: add High Speed I2C controller driver i2c: rcar: fixup rcar type naming i2c: scmi: remove some bogus NULL checks i2c: sh_mobile & rcar: Enable the driver on all ARM platforms i2c: sh_mobile: Convert to clk_prepare/unprepare i2c: mux: gpio: use reg value for i2c_add_mux_adapter i2c: mux: gpio: use gpio_set_value_cansleep() i2c: Include linux/of.h header i2c: mxs: Fix PIO mode on i.MX23 i2c: mxs: Rework the PIO mode operation i2c: mxs: distinguish i.MX23 and i.MX28 based I2C controller ...
2013-11-11Merge tag 'drivers-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM driver updates from Olof Johansson: "Updates of SoC-near drivers and other driver updates that makes more sense to take through our tree. In this case it's involved: - Some Davinci driver updates that has required corresponding platform code changes (gpio mostly) - CCI bindings and a few driver updates - Marvell mvebu patches for PCI MSI support (could have gone through the PCI tree for this release, but they were acked by Bjorn for 3.12 so we kept them through arm-soc). - Marvell dove switch-over to DT-based PCIe configuration - Misc updates for Samsung platform dmaengine drivers" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (32 commits) ARM: S3C24XX: add dma pdata for s3c2410, s3c2440 and s3c2442 dmaengine: s3c24xx-dma: add support for the s3c2410 type of controller ARM: S3C24XX: Fix possible dma selection warning PCI: mvebu: make local functions static PCI: mvebu: add I/O access wrappers PCI: mvebu: Dynamically detect if the PEX link is up to enable hot plug ARM: mvebu: fix gated clock documentation ARM: dove: remove legacy pcie and clock init ARM: dove: switch to DT probed mbus address windows ARM: SAMSUNG: set s3c24xx_dma_filter for s3c64xx-spi0 device ARM: S3C24XX: add platform-devices for new dma driver for s3c2412 and s3c2443 dmaengine: add driver for Samsung s3c24xx SoCs ARM: S3C24XX: number the dma clocks PCI: mvebu: add support for Marvell Dove SoCs PCI: mvebu: add support for reset on GPIO PCI: mvebu: remove subsys_initcall PCI: mvebu: increment nports only for registered ports PCI: mvebu: move clock enable before register access PCI: mvebu: add support for MSI irqchip: armada-370-xp: implement MSI support ...
2013-10-07ARM: davinci: remove deprecated IRQF_DISABLEDMichael Opdenacker
This patch proposes to remove the IRQF_DISABLED flag from Davinci code ;) It's a NOOP since 2.6.35, and will be removed one day Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-30misc: (at24) move header to linux/platform_data/Vivien Didelot
This patch moves the at24.h header from include/linux/i2c to include/linux/platform_data and updates existing support accordingly. It also fixes the following checkpatch warning: WARNING: please, no space before tabs #436: FILE: include/linux/platform_data/at24.h:31: + * ^Iu8 *mac_addr = ethernet_pdata->mac_addr;$ Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-09-25ARM: davinci: da8xx boards: gpio device creationPhilip Avinash
Register gpio platform device on DA8XX boards. While at it, group related include files together. Signed-off-by: Philip Avinash <avinashphilip@ti.com> [nsekhar@ti.com: remove SoC specific parts from this file. fix compile warnings] Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-22ARM: davinci: serial: get rid of davinci_uart_configManjunathappa, Prakash
"struct davinci_uart_config" was introduced to specify UART ports brought out or enabled on the board. But none of the boards use it for that purpose and we are not going to add anymore board files, so remove the structure. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Suggested-by: Sekhar Nori <nsekhar@ti.com> [nsekhar@ti.com: split patch to remove davinci_serial_setup_clk() changes.] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-17Merge tag 'davinci-for-v3.10/board-2-v2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/boards From Sekhar Nori: v3.10 board updates for DaVinci This set of patches enables remoteproc support on DA850 EVM and fixes some sparse warnings for the same board. * tag 'davinci-for-v3.10/board-2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci: da850 evm: fix const qualifier placement ARM: davinci: da850 board: add remoteproc support ARM: davinci: ensure global variables are declared ARM: davinci: sram.c: fix incorrect type in assignment ARM: davinci: da8xx dt: make file local symbols static ARM: davinci: da8xx: add remoteproc support ARM: davinci: remove test for undefined Kconfig macro ARM: davinci: mmc: derive version information from device name ARM: davinci: da850: add ECAP & EHRPWM clock nodes ARM: davinci: clk framework support for enable/disable functionality
2013-04-03ARM: davinci: mmc: derive version information from device nameManjunathappa, Prakash
Remove specifying mmc controller IP version information via platform data, instead specify device name so that driver derives it from platform_device_id table. Also change the clock node name to match the changed dev_id. Tested on da850-evm to make sure driver loads without clk_get failures. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-02ARM: davinci: use is IS_ENABLED macroLad, Prabhakar
This patches replaces #if defined() by IS_ENABLED macro, which provides better readability. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-01-29Merge tag 'davinci-for-v3.9/soc' of ↵Olof Johansson
git://gitorious.org/linux-davinci/linux-davinci into next/soc From Sekhar Nori: DaVinci SoC changes for v3.9 This pull request: 1) Fixes a bug with the way SPI devices were registered on DA850 2) Adds support for DSP clock and resetting the DSP on DA850 3) Fixes checkpatch issue with some existing files. * tag 'davinci-for-v3.9/soc' of git://gitorious.org/linux-davinci/linux-davinci: ARM: davinci: da850: add dsp clock definition ARM: davinci: psc: introduce reset API ARM: davinci: psc.c: change pr_warning() to pr_warn() ARM: davinci: devices-da8xx.c: change pr_warning() to pr_warn() ARM: davinci: da8xx_register_spi() should not register SPI board info Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-03ARM: davinci: da8xx_register_spi() should not register SPI board infoVivien Didelot
Without this patch, da8xx_register_spi() registers the SPI board info, the SPI controller, and sets its number of chipselect to the size of the static spi_board_info array. This is bad because a SPI board info may declare devices for different SPI buses, and because other code can also call spi_register_board_info() (e.g. a daughter board might provide additional SPI devices). This patch removes the spi_register_board_info() call from da8xx_register_spi(), renames this last one to da8xx_register_spi_bus() to be more explicit, takes the number of chipselect as a function parameter, and updates the impacted board-da8{3,5}0-evm.c, and board-mityomapl138.c files accordingly. It also sets the SPI platform data static, as it doesn't need to be exported. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> [nsekhar@ti.com: fixed conflicts with v3.7-rc7, converted to use pr_warn(), modified print messages to use __func__] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-12-24ARM: delete struct sys_timerStephen Warren
Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-14ARM: davinci: move platform_data definitionsArnd Bergmann
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the davinci include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: "Ben Dooks" <ben-linux@fluff.org> Cc: "Wolfram Sang" <w.sang@pengutronix.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Liam Girdwood <lrg@ti.com> Cc: davinci-linux-open-source@linux.davincidsp.com
2012-05-05ARM: davinci: use machine specific hook for late initShawn Guo
Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sekhar Nori <nsekhar@ti.com>
2012-01-05ARM: 7190/1: restart: davinci: use new restart hookSekhar Nori
Rather than using DaVinci specific davinci_soc_info based restart hook, use the restart hook available in the machine descriptor instead. Tested on DM365 and AM18x EVMs. v2: Changed to use restart hook in machine descriptor per Russell's comment. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-07Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (226 commits) mtd: tests: annotate as DANGEROUS in Kconfig mtd: tests: don't use mtd0 as a default mtd: clean up usage of MTD_DOCPROBE_ADDRESS jffs2: add compr=lzo and compr=zlib options jffs2: implement mount option parsing and compression overriding mtd: nand: initialize ops.mode mtd: provide an alias for the redboot module name mtd: m25p80: don't probe device which has status of 'disabled' mtd: nand_h1900 never worked mtd: Add DiskOnChip G3 support mtd: m25p80: add EON flash EN25Q32B into spi flash id table mtd: mark block device queue as non-rotational mtd: r852: make r852_pm_ops static mtd: m25p80: add support for at25df321a spi data flash mtd: mxc_nand: preset_v1_v2: unlock all NAND flash blocks mtd: nand: switch `check_pattern()' to standard `memcmp()' mtd: nand: invalidate cache on unaligned reads mtd: nand: do not scan bad blocks with NAND_BBT_NO_OOB set mtd: nand: wait to set BBT version mtd: nand: scrub BBT on ECC errors ... Fix up trivial conflicts: - arch/arm/mach-at91/board-usb-a9260.c Merged into board-usb-a926x.c - drivers/mtd/maps/lantiq-flash.c add_mtd_partitions -> mtd_device_register vs changed to use mtd_device_parse_register.
2011-09-11mtd: nand: rename NAND_USE_FLASH_BBTBrian Norris
Recall the recently added prefix requirements: * "NAND_" for flags in nand.h, used in nand_chip.options * "NAND_BBT_" for flags in bbm.h, used in nand_chip.bbt_options or in nand_bbt_descr.options Thus, I am changing NAND_USE_FLASH_BBT to NAND_BBT_USE_FLASH. Again, this flag is found in bbm.h and so should NOT be used in the "nand_chip.options" field. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-09-11mtd: nand: consolidate redundant flash-based BBT flagsBrian Norris
This patch works with the following three flags from two headers (nand.h and bbm.h): (1) NAND_USE_FLASH_BBT (nand.h) (2) NAND_USE_FLASH_BBT_NO_OOB (nand.h) (3) NAND_BBT_NO_OOB (bbm.h) These flags are all related and interdependent, yet they were in different headers. Flag (2) is simply the combination of (1) and (3) and can be eliminated. This patch accomplishes the following: * eliminate NAND_USE_FLASH_BBT_NO_OOB (i.e., flag (2)) * move NAND_USE_FLASH_BBT (i.e., flag (1)) to bbm.h It's important to note that because (1) and (3) are now both found in bbm.h, they should NOT be used in the "nand_chip.options" field. I removed a small section from the mtdnand DocBook because it referes to NAND_USE_FLASH_BBT in nand.h, which has been moved to bbm.h. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-08-21ARM: mach-davinci: convert boot_params to atag_offsetNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-07-18ARM: mach-davinci: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_sizeNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-03-11davinci: add spi devices support for da830/omap-l137/am17x evmSekhar Nori
This patch adds the on-board SPI flash device to the DA830/OMAP-L137/AM17x EVM. It also registers the SPI flash device to the MTD subsystem. Based on SPI flash device support for MityDSP-L138F platform. Signed-off-by: Sekhar Nori <nsekhar@ti.com> [michael.williamson@criticallink.com: moved da830evm_spi0_pdata to devices-da8xx.c] [michael.williamson@criticallink.com: moved da830evm_init_spi0 to devices-da8xx.c] Signed-off-by: Michael Williamson <michael.williamson@criticallink.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2010-10-21Merge branch 'davinci-next' into davinci-for-linusKevin Hilman
Conflicts: arch/arm/mach-davinci/board-da830-evm.c arch/arm/mach-davinci/board-da850-evm.c
2010-10-20arm: remove machine_desc.io_pg_offst and .phys_ioNicolas Pitre
Since we're now using addruart to establish the debug mapping, we can remove the io_pg_offst and phys_io members of struct machine_desc. The various declarations were removed using the following script: grep -rl MACHINE_START arch/arm | xargs \ sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }' [ Initial patch was from Jeremy Kerr, example script from Russell King ] Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Eric Miao <eric.miao at canonical.com>
2010-09-24davinci: cleanup mdio arch code and switch to phy_idCyril Chemparathy
This patch removes davinci architecture code that has now been rendered useless by the previous patches in the MDIO separation series. In addition, the earlier phy_mask definitions have been replaced with corresponding phy_id definitions. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Tested-by: Michael Williamson <michael.williamson@criticallink.com> Tested-by: Caglar Akyuz <caglarakyuz@gmail.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-24davinci: Add machine checks to DA8XX serial console init routinesMichael Williamson
This patch adds machine checks in the serial console init routines for the DA8XX EVM boards. This is needed because there are other DA8XX based machines that use a different UART/tty as the console and may be included in a common kernel build. Signed-off-by: Michael Williamson <michael.williamson@criticallink.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-24davinci: am17x/da830/omap-l137 evm: setup NAND flash timingSudhakar Rajashekhara
Setup the NAND flash timings for DA830 EVM. Before configuring the timing values, throughput calculation using dd command yielded 477 kB/s write and 970 kB/s read speed. After the timing configuration, the throughput was measured to be 2.5 MB/s write and 5.1 MB/s read. [Mukul Bhatnagar: actual calculation of timing values from the NAND datasheet] Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Mukul Bhatnagar <mbhatnagar@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-24davinci: introduce support for AM1x ARM9 microprocessorsSekhar Nori
The Sitara AM17x SoCs from TI are an OMAP-L137 pin-to-pin compatible ARM9 microprocessor offering from TI. The Sitara AM18x SoCs from TI are an OMAP-L138 pin-to-pin compatible ARM9 microprocessor offering from TI. More information about these processors available at: www.ti.com/am1x Because of their compatibiliy with OMAP-L1x, the kernel support for OMAP-L1x is fully relevant to AM1x processors. This patch updates the Kconfig prompt and help text to include the AM1x part names to help users select configurations required for these parts easily. Also, the hardware information that shows up in /proc/cpuinfo is updated to show applicability of the respective OMAP-L1x EVMs for AM1x parts. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-08-08Merge branch 'davinci-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: davinci: dm646x EVM: Specify reserved EDMA channel/slots davinci: da8xx/omapl EVM: Specify reserved channels/slots davinci: support for EDMA resource sharing davinci: edma: provide ability to detect insufficient CC info data davinci: da8xx: sparse cleanup: remove duplicate entries in irq priorities davinci: DM365: fixed second serial port Davinci: tnetv107x evm board initial support Davinci: tnetv107x initial gpio support Davinci: tnetv107x soc support Davinci: tnetv107x decompresser uart definitions Davinci: generalized debug macros
2010-08-05davinci: da8xx/omapl EVM: Specify reserved channels/slotsRajashekhara, Sudhakar
The drivers on da8xx/omapl EVMs do not utilize all the channels and slots provided by EDMA. Some of these are better utilitzed by the DSP on the SoC for speeding up codec operations. Reserve these channels/slots for the DSP. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-20ASoC: davinci: let platform data define edma queue numbersSekhar Nori
Currently the EDMA queue to be used by for servicing ASP through internal RAM is fixed to EDMAQ_0 and that to service internal RAM from external RAM is fixed to EDMAQ_1. This may not be the desirable configuration on all platforms. For example, on DM365, queue 0 has large fifo size and is more suitable for video transfers. Having audio and video transfers on the same queue may lead to starvation on audio side. platform data as defined currently passes a queue number to the driver but that remains unused inside the driver. Fix this by defining one queue each for ASP and RAM transfers in the platform data and using it inside the driver. Since EDMAQ_0 maps to 0, thats the queue that will be used if the asp queue number is not initialized. None of the platforms currently utilize ping-pong transfers through internal RAM so that functionality remains unchanged too. This patch has been tested on DM644x and OMAP-L138 EVMs. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-05-13Davinci: aintc/cpintc - use ioremap()Cyril Chemparathy
This patch implements the following: - interrupt initialization uses ioremap() instead of passing a virtual address via davinci_soc_info. - machine definitions directly point to cp_intc_init() or davinci_irq_init() - davinci_intc_type and davinci_intc_base now get initialized in controller specific init functions instead of davinci_common_init() - minor fix in davinci_irq_init() to use intc_irq_num instead of DAVINCI_N_AINTC_IRQ Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-06DA830 EVM: use DA8XX_AEMIF_*_BASE #define'sSergei Shtylyov
The board file #define's its own version of EMIFA base addresses, while there are DA8XX_AEMIF_*_BASE macros #define'd in <mach/da8xx.h>. Start using them instead. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-06Davinci: promote da8xx_pinmux_setup()Cyril Chemparathy
Rename da8xx_pinmux_setup() to davinci_cfg_reg_list() and promote it for use in other SOCs that may need the ability to configure multiple pins in one shot. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-06Davinci: cpintc host map configurationCyril Chemparathy
Host map configuration instructs the interrupt controller to route interrupt channels to FIQ or IRQ lines. Currently, DA8xx family of devices leave these registers at their reset-default values. TNETV107X however does not have sane reset defaults, and therefore this architecture needs to reconfigure the host-map such that channels 0 and 1 go to FIQ, and the remaining channels raise IRQs. This patch adds an optional host map argument to cp_intc_init() for this. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-06davinci: da830/omap-l137 evm: use 8-wire MMC/SD card supportVipin Bhandari
The merge for 2.6.34 brings in 8-bit support to the DaVinci MMC/SD driver. This patch updates the platform data for DA830/OMAP-L137 EVM to use 8-wire support available in the driver. Signed-off-by: Vipin Bhandari <vipin.bhandari@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-06davinci: da830/omap-l137 evm: add support for GPIO based MMC/SD card detectionVipin Bhandari
The DA830/OMAP-L137 EVM has GPIO based card detection logic, but the current code does not use it. Add support for GPIO based card detection to avoid reading the card to see if a card is present or not. Signed-off-by: Vipin Bhandari <vipin.bhandari@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-02-04davinci: da8xx/omapl1: add support for the second sysconfig moduleSekhar Nori
OMAP-L138 adds a second SYSCFG region having useful functionality like deep sleep, pull up/down control and SATA clock stop. This patch makes provision for accessing registers from second SYSCFG region in da8xx code. Note that OMAP-L137 has a single SYSCFG region. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-11-25DA8xx/OMAP-L1xx: Add high speed SD/MMC capabilitiesChaithrika U S
Include high speed capabilities in MMC/SD platform data for DA830/OMAP-L137 and DA850/OMAP-L138 EVMs. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-11-25davinci: DA8XX/OMAP-L1XX: fix compiler warningSudhakar Rajashekhara
When kernel is built with CONFIG_DEBUG_SECTION_MISMATCH=y option, using da8xx_omapl_defconfig, some warnings are observed: WARNING: vmlinux.o(.text+0xc2a4): Section mismatch in reference from the function da850_evm_setup_nor_nand() to the variable .init.data:da850_nand_pins The function da850_evm_setup_nor_nand() references the variable __initdata da850_nand_pins. This is often because da850_evm_setup_nor_nand lacks a __initdata annotation or the annotation of da850_nand_pins is wrong. This patch fixes such warnings. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-11-25davinci: DA830/OMAP-L137 EVM: do not configure NAND on UI card when MMC/SD ↵Sekhar Nori
is selected On the DA830, AEMIF and MMC/SD pins are shared. On the EVM, when the mux_mode signal is low MMC/SD works and when mux_mode signal is high, NAND works. When MMC/SD driver is configured in the kernel, do not let NAND get registered and drive mux_mode high. Instead, print a warning for user to understand why the platform device for NAND did not get registered. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-11-25davinci: DA830/OMAP-L137 EVM: use runtime detection for UI cardSekhar Nori
This patch supports runtime detection of DA830 UI card and eliminates the need for DA830_UI config option. Successful probe of GPIO expander present on the UI card is used to detect its presence. For this reason, GPIO_PCF857X is auto- selected when DA830 EVM is configured. In case the UI card is absent, the probe fails in reasonable time. As a side effect this patch also gets rid of the voilation of Documentation/SubmittingPatches section 2.2 in function da830_evm_ui_expander_setup() Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-10 13:07:11 +0000