summaryrefslogtreecommitdiff
path: root/arch/arm/mach-imx/mach-cpuimx27.c
AgeCommit message (Collapse)Author
2011-08-22ARM: 7051/1: cpuimx* boards: fix mach-types errorsEric Bénard
I made some changes to the entry in the ARM Machine Registry after submission which was the wrong thing to do. This patch should help to fix this error. Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-06-06gpio/mxc: Change gpio-mxc into an upstanding gpio driverShawn Guo
The patch makes necessary changes on gpio-mxc as below to turn it into an upstanding gpio driver. * Add a list to save all mx2 ports references, so that mx2_gpio_irq_handler can walk through all interrupt status registers * Use readl/writel to replace mach-specific accessors __raw_readl/__raw_writel * Change mxc_gpio_init into mxc_gpio_probe function * Move "struct mxc_gpio_port" into gpio-mxc.c, as it needs not to be public at all, and also make some other cleanup on plat-mxc/include/mach/gpio.h at the same time And the patch then migrates mach-imx and mach-mx5 to the updated driver by adding corresponding platform devices. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-19ARM: imx: remove #includes already available from devices-common.hUwe Kleine-König
Most machine files include "devices-imxXX.h" which in turn includes <mach/devices-common.h>. The latter already includes many headers that the machine files don't need to include again. These were found by: $ grep \#include arch/arm/plat-mxc/include/mach/devices-common.h > tmpfile $ git grep -l 'devices-imx' arch/arm | xargs grep -f tmpfile -F (but I kept linux/init.h, linux/kernel.h and linux/platform_device.h) LAKML-Reference: 1298912674-15153-2-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM i.MX: introduce imx_otg_ulpi_create to create ULPI transceiversSascha Hauer
The boards are currently using otg_ulpi_create and mxc_ulpi_access_ops, both are only present if CONFIG_USB_ULPI is set. To remove the need of ifdefs in the board code introduce a imx_otg_ulpi_create functions which expands to a static inline function if compiled without ulpi. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-11ARM i.MX ehci: do ehci init in board specific functionsSascha Hauer
The mxc-ehci driver calls SoC specific phy initialization right after calling board specific initialization. To offer greater flexibility for boards to setup the phy and to get rid of some unnecessary flags in platform data this patch lets the boards call the SoC specific phy initialization and remove it from the driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-10ARM: imx: use .init_early to initialize cpu type and reset addressUwe Kleine-König
This used to be done in .map_io which is supposed to only setup the memory mapping. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-17ARM: imx: remove now empty devices.hUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically allocate fsl-usb2-udc devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically allocate mxc-ehci devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically register mxc-mmc devicesUwe Kleine-König
... plus a trivial simplification of mx21ads_sdhc_init() Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically allocate imx2-wdt devicesUwe Kleine-König
Currently there is no platform data used in the driver. In case this changes and for consistency NULL is passed unused to the soc specific functions. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17ARM: imx: dynamically allocate mxc_w1 devicesUwe Kleine-König
Currently there is no platform data used in the driver. In case this changes NULL is passed unused to the soc specific functions. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-10-20arm: remove machine_desc.io_pg_offst and .phys_ioNicolas Pitre
Since we're now using addruart to establish the debug mapping, we can remove the io_pg_offst and phys_io members of struct machine_desc. The various declarations were removed using the following script: grep -rl MACHINE_START arch/arm | xargs \ sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }' [ Initial patch was from Jeremy Kerr, example script from Russell King ] Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Eric Miao <eric.miao at canonical.com>
2010-10-19Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable Conflicts: arch/arm/mach-at91/include/mach/system.h arch/arm/mach-imx/mach-cpuimx27.c AT91 conflict resolution: Acked-by: Anders Larsen <al@alarsen.net> IMX conflict resolution confirmed by Uwe Kleine-König.
2010-10-12Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6Russell King
2010-10-11ARM: imx: dynamically register fec devicesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-08cpuimx27: fix i2c bus selectionEric Bénard
Recent clean of i.MX devices registration changed the i2C bus number selected for our platform (Freescale start peripheral ID at 1, kernel now start it at 0 so i.MX27's i2c 1 is kernel's i2c 0). Without this fix, i2c is unusable on this platform. Signed-off-by: Eric Bénard <eric@eukrea.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: imx: make all pin lists const and signed, move to .init where possibleUwe Kleine-König
Making the lists signed fixes sparse warnings like: arch/arm/mach-imx/mach-mx27_3ds.c:94:31: warning: incorrect type in argument 1 (different signedness) arch/arm/mach-imx/mach-mx27_3ds.c:94:31: expected int const *pin_list arch/arm/mach-imx/mach-mx27_3ds.c:94:31: got unsigned int static [toplevel] *<noident> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: imx: fix name of macros to add imx-i2c devicesUwe Kleine-König
This is a follow up to c698715 (ARM: imx: dynamically register imx-i2c devices (imx27)) 2b92084 (ARM: imx: dynamically register imx-i2c devices (imx21)) 6348e6b (ARM: imx: dynamically register imx-i2c devices (imx1)) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-08-23ARM: imx: fix build failure concerning otg/ulpiUwe Kleine-König
The build failure was introduced by 13dd0c9 (USB: otg/ulpi: extend the generic ulpi driver.) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Cc: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-26eukrea-baseboards: merge includes in one fileEric Bénard
as per suggested by Sascha Signed-off-by: Eric Bénard <eric@eukrea.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26Merge branch 'imx/for-2.6.36' of git://git.pengutronix.de/git/ukl/linux-2.6 ↵Uwe Kleine-König
into HEAD There are some more conflicts than detected by git, namely support for the newly added cpuimx machines needed to be converted to dynamic device registration. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Conflicts: arch/arm/mach-imx/Makefile arch/arm/mach-imx/devices.c arch/arm/mach-imx/devices.h arch/arm/mach-imx/eukrea_mbimx27-baseboard.c arch/arm/mach-mx2/Kconfig arch/arm/mach-mx25/Makefile arch/arm/mach-mx25/devices.c arch/arm/plat-mxc/include/mach/mx25.h arch/arm/plat-mxc/include/mach/mxc_nand.h
2010-06-30ARM: imx: dynamically register imx-uart devices (imx27)Uwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30ARM: imx: dynamically register imx-i2c devices (imx27)Uwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30ARM: imx: Change the way nand devices are registered (imx27)Uwe Kleine-König
Make use of new mechanism to register a nand device. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30ARM: imx: rename mxc_uart_devicex to follow a common naming schemeUwe Kleine-König
Addionally remove an unneeded include. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-24ARM: imx: rename mach dir for mx21 and mx27 to mach-imxUwe Kleine-König
Finally all imx code should end up there, start with mach-mx2. While touching all files rename some files to use a hyphen instead of an underscore. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-18 15:08:14 +0000