summaryrefslogtreecommitdiff
path: root/arch/arm/mach-imx
AgeCommit message (Collapse)Author
2008-01-28Remove references to "make dep"Adrian Bunk
"make dep" is no longer required in kernel 2.6, but was still mentioned in some places. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-11-26[ARM] 4648/1: i.MX/MX1 ensure more complete AITC initializationPavel Pisa
The AITC code did not allow to start kernel, if bootloader manipulates with interrupt level mask. The change ensures, that NIMASK is initialized into correct state and that interrupts enable registers are cleared. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Don't take semaphore in cpufreq_quick_get() [CPUFREQ] Support different families in fid/did to frequency conversion [CPUFREQ] cpufreq_stats: misc cpuinit section annotations [CPUFREQ] implement !CONFIG_CPU_FREQ stub for cpufreq_unregister_notifier() [CPUFREQ] mark hotplug notifier callback as __cpuinit [CPUFREQ] Only check for transition latency on problematic governors (kconfig fix) [CPUFREQ] allow ondemand and conservative cpufreq governors to be used as default [CPUFREQ] move policy's governor initialisation out of low-level drivers into cpufreq core [CPUFREQ] Longhaul - Add support for PM133 northbridge [CPUFREQ] x86: use num_online_nodes to get physical cpus numbers for
2007-10-04[CPUFREQ] move policy's governor initialisation out of low-level drivers ↵Thomas Renninger
into cpufreq core Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Andi Kleen <ak@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Jones <davej@redhat.com>
2007-09-24arm: i.MX/MX1 SDHC implements SD cards read-only switch read-backPavel Pisa
The patch enables to define MMC host get_ro() method through platform data. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-08-30[ARM] 4561/1: i.MX/MX1 GPIO parenthes omission and input setup fixPavel Pisa
During GPIO testing on PiMX1 board there has been revealed problem with some pins input functions. The GIUS bit has to be set for inputs to work reliably too. It is surprising that input worked on some inputs with incorrect setup before. DR is not mandatory, but it ensures stable constant level on internal traces. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-08-23[ARM] 4552/1: i.MX/MX1 GPIO output setup fixPavel Pisa
The pins for GPIO should be provided as plain number build as (GPIO_PORTx + pin_number). But to setup the output GPIO_GIUS and GPIO_DR have to be specified in mode to route right value to the pin. This is a fix, it should go to 2.6.23 Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-21clockevents: fix resume logicThomas Gleixner
We need to make sure, that the clockevent devices are resumed, before the tick is resumed. The current resume logic does not guarantee this. Add CLOCK_EVT_MODE_RESUME and call the set mode functions of the clock event devices before resuming the tick / oneshot functionality. Fixup the existing users. Thanks to Nigel Cunningham for tracking down a long standing thinko, which affected the jinxed VAIO. [akpm@linux-foundation.org: xen build fix] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12[ARM] 4374/3: i.MX/MX1 clock event sourcePavel Pisa
Support clock event source based on i.MX general purpose timer in free running timer mode. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12[ARM] 4373/1: i.MX/MX1 GPIO support implementationPavel Pisa
Support for generic input output for MX1 family. The implementation prevents allocation of one pin by two users, but does not store pointer to the user description permanently, because this solution would have bigger memory overhead. The simple way to integrate code with per BSP pins setup and allocation is required else all GPIO registration checking is useless. The function imx_gpio_setup_multiple_pins() can be used for this purpose in future. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-30[ARM] Fix some section mismatch warningsRussell King
The following patch fixes these section mismatch warnings: WARNING: arch/arm/mach-at91/built-in.o(.text+0xdf4): Section mismatch: reference to .init.data:dk_nand_partition (between 'nand_partitions' and 'at91_leds_event') WARNING: arch/arm/mach-at91/built-in.o(.text+0xbdc): Section mismatch: reference to .init.data:ek_nand_partition (after 'nand_partitions') WARNING: arch/arm/mach-at91/built-in.o(.text+0xbdc): Section mismatch: reference to .init.data:ek_nand_partition (between 'nand_partitions' and 'ads7843_pendown_state') WARNING: arch/arm/mach-at91/built-in.o(.text+0xbdc): Section mismatch: reference to .init.data:ek_nand_partition (after 'nand_partitions') WARNING: arch/arm/mach-at91/built-in.o(.text+0xc28): Section mismatch: reference to .init.data:kb9202_nand_partition (after 'nand_partitions') WARNING: arch/arm/mach-footbridge/built-in.o(.text+0xaa4): Section mismatch: reference to .init.data:cats_pci (between 'cats_pci_init' and 'ebsa285_leds_event')WARNING: arch/arm/mach-ixp2000/built-in.o(.text+0xb54): Section mismatch: reference to .init.text:ixp2000_init_irq (between 'ixdp2x00_init_irq' and 'ixdp2x00_irq_handler') WARNING: arch/arm/mach-ixp23xx/built-in.o(.text+0x670): Section mismatch: reference to .init.text:ixp23xx_pci_common_init (between 'ixp23xx_pci_slave_init' and 'ixp23xx_pci_scan_bus') WARNING: arch/arm/mach-ixp23xx/built-in.o(.text+0x890): Section mismatch: reference to .init.text:ixp23xx_init_irq (between 'ixdp2351_init_irq' and 'roadrunner_pci_preinit') WARNING: arch/arm/mach-ixp23xx/built-in.o(.text+0x9a8): Section mismatch: reference to .init.text:ixp23xx_pci_preinit (after 'roadrunner_pci_preinit') WARNING: arch/arm/mach-imx/built-in.o(__ksymtab+0x80): Section mismatch: reference to .init.text:imx_set_mmc_info (between '__ksymtab_imx_set_mmc_info' and '__ksymtab_set_imx_fb_info') WARNING: arch/arm/mach-imx/built-in.o(__ksymtab+0x88): Section mismatch: reference to .init.text:set_imx_fb_info (after '__ksymtab_set_imx_fb_info') WARNING: arch/arm/mach-sa1100/built-in.o(.text+0x1930): Section mismatch: reference to .init.data:neponset_port_fns (between 'neponset_probe' and 'assabet_leds_event') WARNING: drivers/built-in.o(.text+0x3f100): Section mismatch: reference to .init.text:ps2_clear_input (between 'ps2_probe' and 'ps2_cmd_aborted') WARNING: drivers/built-in.o(.text+0x3f1c8): Section mismatch: reference to .init.text:ps2_clear_input (between 'ps2_probe' and 'ps2_cmd_aborted') WARNING: drivers/built-in.o(.text+0x4f988): Section mismatch: reference to .init.text:ps2_clear_input (between 'ps2_probe' and 'ps2_cmd_aborted') WARNING: drivers/built-in.o(.text+0x4fa50): Section mismatch: reference to .init.text:ps2_clear_input (between 'ps2_probe' and 'ps2_cmd_aborted') Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-20[ARM] spelling fixesSimon Arlott
Spelling fixes in arch/arm/. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-08Add IRQF_IRQPOLL flag on armBernhard Walle
Add IRQF_IRQPOLL for each timer interrupt. Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-12[ARM] 4255/1: i.MX/MX1 Correct MPU PLL reference clock value.Pavel Pisa
Only System PLL clock source is selectable by CSCR_SYSTEM_SEL bit. MPU PLL is driven by 512*CLK32 for each case. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-12[ARM] 4254/1: i.MX/MX1 CPU Frequency scaling honor boot loader set BCLK_DIV.Pavel Pisa
The minimal bus clock prescaler should be kept at value selected by the board / boot loader designer. Switching frequency above startup limit could lead to the external memory/devices misbehave. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-16[PATCH] clocksource: fixup is_continous changes on ARMThomas Gleixner
Fixup the is_contionous replacement by a flag field. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Russell King <rmk@arm.linux.org.uk> Cc: john stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-24[ARM] 4092/1: i.MX/MX1 CPU Frequency scaling latency definitionPavel Pisa
The transition latency has to be defined and reasonably small to allow on-demand and conservative governors. The value has been defined according to manual. The imx_set_target() protected against seen out of range requests now. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-13[ARM] 3992/1: i.MX/MX1 CPU Frequency scaling supportPavel Pisa
Support to change MX1 CPU frequency at runtime. Tested on PiKRON's PiMX1 board and seems to be fully stable up to 200 MHz end even as low as 8 MHz. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-07[ARM] 3991/1: i.MX/MX1 high resolution time sourcePavel Pisa
Enhanced resolution for time measurement functions. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-07[ARM] 3990/1: i.MX/MX1 more precise PLL decodePavel Pisa
The future high resolution support inclusion utilizes imx_decode_pll() in timer base frequency computation. This use requires more precise computation without discarding 10 bits by shifting left. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30[ARM] Remove compatibility layer for ARM irqsRussell King
set_irq_chipdata -> set_irq_chip_data get_irq_chipdata -> get_irq_chip_data do_level_IRQ -> handle_level_irq do_edge_IRQ -> handle_edge_irq do_simple_IRQ -> handle_simple_irq irqdesc -> irq_desc irqchip -> irq_chip Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-06Initial blind fixup for arm for irq changesLinus Torvalds
Untested, but this should fix up the bulk of the totally mechanical issues, and should make the actual detail fixing easier. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03fix file specification in commentsUwe Zeisberger
Many files include the filename at the beginning, serveral used a wrong one. Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-08-01[ARM] 3739/1: genirq updates: irq_chip, add and use irq_chip.nameDavid Brownell
Patch from David Brownell ARM genirq cleanups/updates: - Start switching platforms to newer APIs * use "irq_chip" name, not "irqchip" * providing irq_chip.name - Show irq_chip.name in /proc/interrupts, like on x86. This update a bit more than half of the ARM code. The irq_chip.name values were chosen to match docs (if I have them) or be otherwise obvious ("FPGA", "CPLD", or matching the code). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02[PATCH] ARM: fixup irqflags breakage after ARM genirq mergeThomas Gleixner
The irgflags consolidation did conflict with the ARM to generic IRQ conversion and was not applied for ARM. Fix it up. Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01[ARM] 3691/1: ARM: Convert imx to generic irq handlingThomas Gleixner
Patch from Thomas Gleixner From: Thomas Gleixner <tglx@linutronix.de> Fixup the conversion to generic irq subsystem. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-22[ARM] 3601/1: i.MX/MX1 DMA error handling for signaled channels onlyPavel Pisa
Patch from Pavel Pisa There has been bug, that dma_err_handler() touches even channels not signaling error condition. Problem noticed by Andrea Paterniani. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-08[ARM] 3546/1: PATCH: subtle lost interrupts bug on i.MXMatt Reimer
Patch from Matt Reimer There is a subtle bug in the GPIO interrupt status register handling in arch/arm/mach-imx/irq.c:imx_gpio_ack_irq(). The documentation states that a 1 should be written to the relevant bit to acknowledge a GPIO interrupt, but that is not what the code does. The problem is that the |= writes back 1s for all the *other* interrupts represented in the register, so interrupts could get lost. For example, if interrupts are pending for GPIO B10 and B12, ISR_B would have the value 0x00001400. Then when the interrupt code handles GPIO B10, it eventually calls imx_gpio_ack_irq(IRQ_GPIOB(10)), which effectively does this: ISR_B |= 1 << 10; with the result that (0x00001400 | 0x00000400) is written, clearing the interrupt status bits for *both* GPIO B10 and B12. The fix is to write 1s only for the interrupts we want to clear. The same problem seems to be occurring in the DMA code; this patch does not address those issues. Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Matt Reimer <mreimer@vpop.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-07[ARM] 3501/1: i.MX: fix lowlevel debug macrosSascha Hauer
Patch from Sascha Hauer This patch fixes the addruart macro to work with both mmu enabled and disabled. Signed-off-by: Sascha Hauer <s.hauer@pengutonix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-04[ARM] 3490/1: i.MX: move uart resources to board filesSascha Hauer
Patch from Sascha Hauer This patch moves the i.MX uart resources and the gpio pin setup to the board files. This allows the boards to decide how many internal uarts are connected to the outside world and whether they use rts/cts or not. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (27 commits) [ARM] 3433/1: ARM: OMAP: 8/8 Update board files [ARM] 3455/1: ARM: OMAP: 7/8 Misc updates, take 2 [ARM] 3454/1: ARM: OMAP: 6/8 Update framebuffer low-level init code, take 2 [ARM] 3430/1: ARM: OMAP: 5/8 Update PM [ARM] 3429/1: ARM: OMAP: 4/8 Update GPIO [ARM] 3428/1: ARM: OMAP: 3/8 Update pin multiplexing [ARM] 3427/1: ARM: OMAP: 2/8 Update timers [ARM] 3426/1: ARM: OMAP: 1/8 Update clock framework [ARM] 3396/2: AT91RM9200 Platform devices update [ARM] 3395/2: AT91RM9200 Dataflash Card vs MMC selection [ARM] 3393/2: AT91RM9200 LED support [ARM] 3453/1: Poodle: Correctly set the memory size [ARM] 3446/1: i.MX: MMC/SD SDHC controller registration for i.MX/MX1 MX1ADS board [ARM] 3444/1: i.MX: Scatter-gather DMA emulation for i.MX/MX1 [ARM] 3451/1: ep93xx: use the m48t86 rtc driver on the ts72xx platform [ARM] 3450/1: ep93xx: use the ep93xx rtc driver [ARM] 3452/1: [S3C2410] RX3715 - add nand information [ARM] 3449/1: [S3C2410] Anubis - fix NAND timings [ARM] 3448/1: [S3C2410] Settle delay when _enabling_ USB PLL [ARM] 3442/1: [S3C2410] SMDK: NAND device setup ...
2006-04-02[ARM] 3457/1: i.MX: SD/MMC support for i.MX/MX1Pavel Pisa
Patch from Pavel Pisa This patch adds support of i.MX/MX1 SD/MMC controller. It has been significantly redesigned from the original Sascha Hauer's version to support scatter-gather DMA, to conform to latest Pierre Ossman's and Russell King's MMC-SD Linux 2.6.x infrastructure. The handling of all events has been moved to the softirq context and is designed with no busy-looping in mind. Unfortunately some controller bugs has to be overcome by limited looping about 2-20 usec but these are observed only for initial card recognition phase. There are still some missing/missed IRQs problems under heavy load. Help of somebody with access to the full SDHC design information is probably necessary. Regenerated against 2.6.16-git-060402 to solve clash with other patches. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02[ARM] 3446/1: i.MX: MMC/SD SDHC controller registration for i.MX/MX1 MX1ADS ↵Pavel Pisa
board Patch from Pavel Pisa From: Stefano Fedrigo <aleph@develer.com> This adds to the MX1ADS platform the needed code to detect insertion/removal of an MMC/SD card. Tested on a v1.1 board. Signed-off-by: Stefano Fedrigo <aleph@develer.com> Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02[ARM] 3444/1: i.MX: Scatter-gather DMA emulation for i.MX/MX1Pavel Pisa
Patch from Pavel Pisa This patch contains simplified set of changes to add scatter-gather emulation capability into MX1 DMA support. The result should be still usable for next combination of DMA transfers Statter-Gather/linear/2D/FIFO to linear/2D/FIFO and linear/2D/FIFO to Statter-Gather/2D/FIFO The patch corrects channel priority allocation to be compatible with MX1 hardware implementation. Previous code has not been adapted from its PXA original. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-05[SERIAL] Remove unnecessary serial.h includeRussell King
imx.c does not use anything from serial.h, so remove it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-13[ARM] 3260/1: remove phys_ram from struct machine_desc (part 2)Nicolas Pitre
Patch from Nicolas Pitre This field is redundent since it must be equal to PHYS_OFFSET anyway. Now that no code uses it anymore, mark it deprecated and remove all initializations from the tree. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-05[ARM] 3231/1: mx1ads board support cleanupSascha Hauer
Patch from Sascha Hauer - remove unnecessary mappings - rename mx1ads_device to cs89x0_device, because that's what it is - fix io/irq resource for cs89x0 device Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-31Merge master.kernel.org:/home/rmk/linux-2.6-drvmodelLinus Torvalds
Manual #include fixups for clashes - there may be some unnecessary
2005-10-30[PATCH] fix missing includesTim Schmielau
I recently picked up my older work to remove unnecessary #includes of sched.h, starting from a patch by Dave Jones to not include sched.h from module.h. This reduces the number of indirect includes of sched.h by ~300. Another ~400 pointless direct includes can be removed after this disentangling (patch to follow later). However, quite a few indirect includes need to be fixed up for this. In order to feed the patches through -mm with as little disturbance as possible, I've split out the fixes I accumulated up to now (complete for i386 and x86_64, more archs to follow later) and post them before the real patch. This way this large part of the patch is kept simple with only adding #includes, and all hunks are independent of each other. So if any hunk rejects or gets in the way of other patches, just drop it. My scripts will pick it up again in the next round. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29Create platform_device.h to contain all the platform device details.Russell King
Convert everyone who uses platform_bus_type to include linux/platform_device.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[ARM] 3000/1: Replace map_desc.physical with map_desc.pfn: iMXDeepak Saxena
Patch from Deepak Saxena iMX map_desc.pfn conversion Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-04[ARM] 2950/1: i.MX gpio setup functionSascha Hauer
Patch from Sascha Hauer Current implementation of imx_gpio_mode does not allow to configure all alternate routing possibilities of the i.MX. With this patch every bit in the gpio setup registers has a corresponding bit in the gpio_mode parameter, so every routing should be possible now. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-29[ARM] Don't include mach-types.h unnecessarilyRussell King
It's pointless to include mach-types.h if you're not going to use anything from it. These references were removed as a result of: grep -lr 'asm/mach-types\.h' . | xargs grep -L 'machine_is_\|MACH_TYPE_\|MACHINE_START\|machine_type' Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-04[ARM] Wrap calls to descriptor handlersRussell King
This is part of Thomas Gleixner's generic IRQ patch, which converts ARM to use the generic IRQ subsystem. Here, we wrap calls to desc->handler() in an inline function, desc_handle_irq(). This reduces the size of Thomas' patch since the changes become more localised. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-04[ARM] Change irq_chip wake/type methods to set_wake/set_typeRussell King
This is part of Thomas Gleixner's generic IRQ patch, which converts ARM to use the generic IRQ subsystem. Here, we rename two of the irq_chip methods - wake becomes set_wake, and type becomes set_type. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-03[PATCH] ARM: Remove machine description macrosRussell King
Remove the pointless machine description macros, favouring C99 initialisers instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-26[PATCH] ARM: Add SA_TIMER flag to timer interruptsRussell King
VST needs to know which timer handler is for the timer interrupt. Mark all timer interrupts with the SA_TIMER flag. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-05-05[PATCH] ARM: select PCI, ISA and ISA_DMARussell King
Rather than using a long "depends on..." and "default y" lines for these options, use select instead. Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-05-03[PATCH] ARM: 2661/1: imxfb includeSascha Hauer
Patch from Sascha Hauer This patch adds the missing include files for the i.MX framebuffer driver. Signed-off-by: Sascha Hauer Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-05 08:24:14 +0000