linux-toradex.git - Linux kernel for Apalis and Colibri modules

Age	Commit message (Expand)	Author
2012-03-08	ENGR00176160 [MX6]Correct PLL1 freq change flow	Anson Huang
2012-03-07	ENGR00176147-2: usb: pass the wakeup event to pdata	Peter Chen
2012-03-07	ENGR00176068-1 mx6q: add smp_twd clock for localtimer	Xinyu Chen
2012-03-06	ENGR00176136- MX6: Added support for 1.2GHz ARM Frequency	Ranjani Vaidyanathan
2012-03-06	ENGR00176175 MX6Q: fix typo in cpu op voltage setting.	Zhang Jiejing
2012-03-06	ENGR00170526-1 MX6Q_Sabreauto: remove audio platform data rst_gpio.	Lionel Xu
2012-03-02	ENGR00175551:Update sabreauto board file for handling spi and paralle nor	Francisco Munoz
2012-03-02	ENGR00175947 camera: sensor mclk change name to clko_clk	Yuxi Sun
2012-03-02	ENGR00175219-6 MX6Q_SABRESD: add clko_clk support	Gary Zhang
2012-03-02	ENGR00175219-5 MX6: remove cko1_clk in clock.c	Gary Zhang
2012-02-28	ENGR00175219-2 MX6Q_SABRESD: add wm8958 support	Gary Zhang
2012-02-23	ENGR00174905 [MX6] gc355 can't work after specific suspend/resume case	Larry Li
2012-02-22	ENGR00174886-1 - EPDC fb: Don't register EPDC unless "epdc" kernel option set	Danny Nold
2012-02-22	ENGR00174569: MX6 - Disable WAIT mode by default	Ranjani Vaidyanathan
2012-02-22	ENGR00174734-1 usb: need to discharge both dp and dm	Peter Chen
2012-02-22	ENGR00174615:Enable AH-1613 GPS module	B38613
2012-02-21	ENGR00171079-10: mx6q-arm2 cs42888 board sample rate settings	Adrian Alonso
2012-02-21	ENGR00171079-8 imx6q sabreauto cs42888 audio support	Adrian Alonso
2012-02-21	ENGR00171079-7 mx6q clock anaclk input source clock	Adrian Alonso
2012-02-21	ENGR00171079-5 imx6q-sabreauto set supportted sample rates	Adrian Alonso
2012-02-21	ENGR00171079-2 mx6 add anaclk_2 io buffers enable macros	Adrian Alonso
2012-02-21	ENGR00171079-1 mx6q-ard: esai remove record early param	Adrian Alonso
2012-02-21	ENGR00175049 - Remove section mismatch warning for Max17135	Danny Nold
2012-02-21	ENGR00174897 i.mx6: clock: fix axi clock mux setting	Jason Liu
2012-02-21	ENGR00174896 i.mx6: i.mx6l: clock: gpu/vpu clock adjustment	Jason Liu
2012-02-20	ENGR00174829-1 MX6Q_SABRESD: fix warnning message	Zhang Jiejing
2012-02-20	ENGR00174824 [MX6]Add workaround for i.MX6DL suspend/resume	Anson Huang
2012-02-17	ENGR00174630 [MX6]Disable GPT serial clock	Anson Huang
2012-02-16	ENGR00174652 i.mx6: explicitly set the LPM mode to run mode during early bootup	Jason Liu
2012-02-16	ENGR00174394 MX6Q_arm2/MX6Q_sabreauto: change ipu_id/disp_id for LDB config.	Wayne Zou
2012-02-16	ENGR00174649 i.mx6dl: clock: set ipu1 clock to 270M, change ldb_di_clk parent	Wayne Zou
2012-02-16	ENGR00174540: i.mx6: anatop_regulator: LDO voltage print not correctly	Jason Liu
2012-02-16	ENGR00174532 [mx6Q]Change 2D clock to 480M	Larry Li
2012-02-15	ENGR00174106-1 - EPDC fb: Support EPDC on MX 6DL/S	Danny Nold
2012-02-15	ENGR00172274-02 - [MX6]: rework IEEE-1588 in MX6Q Sabre-lite/sd board.	Fugang Duan
2012-02-15	ENGR00174425: i.mx6: i.mx6dl: clock: set gpu2d_axi clock parent to mmdc0	Jason Liu
2012-02-15	ENGR00174423-2: i.mx6: clock: code clean up in pfd_set_rate	Jason Liu
2012-02-15	ENGR00174423-1 i.mx6: cpu_op: code clean up	Jason Liu
2012-02-14	ENGR00174381 imx6q-sabreauto: spdif remove tx clock settings	Adrian Alonso
2012-02-14	ENGR00174299-2: MSL part: add ePxP V2 driver	Robby Cai
2012-02-14	ENGR00174121-2 MX6Q_SABRESD: add battery chip support.	Zhang Jiejing
2012-02-13	ENGR00174309:mx6/dl: gpu:enable 2d and 3d	Wu Guoxing
2012-02-13	ENGR00174316 MX6Q ARM2: Fix ov5640_mipi IOMUX incorrect configure	Even Xu
2012-02-13	ENGR00174315 MX6Q max7310 set the default value of PCIE PWR ctrl2 to low	Richard Zhu
2012-02-13	ENGR00174302 [MX6]Clean build warning	Anson Huang
2012-02-10	ENGR00170126 mx6q sabresd: add GPIO key device	Xinyu Chen
2012-02-10	ENGR00174229-1 mx6q sabresd: add sensors devices	Xinyu Chen
2012-02-10	ENGR00173857 MX6Q: add 600M work point	Zhang Jiejing
2012-02-10	ENGR00174033-1 MX6 PCIE: add pcie RC driver	Richard Zhu
2012-02-10	ENGR00174128-2 Revert "Remove the discharge for VBUS and DP-2"	Peter Chen