summaryrefslogtreecommitdiff
path: root/arch/arm/mach-mx6
AgeCommit message (Expand)Author
2012-11-20ENGR00233732 mx6dl: change 996M setpoint voltageimx-android-13.4.1Anson Huang
2012-11-09Merge commit 'rel_imx_3.0.35_12.11.01_RC3' into imx_3.0.35_android_r13.4.yXinyu Chen
2012-11-08ENGR00232525 mx6q_sabresd: system should not be wake up by volume keyLin Fuzhen
2012-11-07ENGR00232586 mx6: increase PUPSCR to make sure LDO is ready for resumeAnson Huang
2012-11-02Merge commit 'rel_imx_3.0.35_12.11.01_RC2' into imx_3.0.35_android_r13.4.yXinyu Chen
2012-11-01ENGR00232087-1 MX6: Enable PU LDO gating.Hongzhang Yang
2012-10-31ENGR00231910 PU regulator: do not disable PU regulatorRobin Gong
2012-10-30ENGR00231063 Sabreauto: fix share pins SD Card and NFCAlejandro Sierra
2012-10-26ENGR00230981-2 pfuze:standby voltage increase for PFMRobin Gong
2012-10-26ENGR00231331 mtd: gpmi: add kernel command line to enable gpmi in arm2 boardHuang Shijie
2012-10-26ENGR00231277 Change the mma8451 and mag3110's config to algin with SDP boardguoyin.chen
2012-10-25ENGR00230167 MX6 regulator: enable and raise the voltage of USB 3p0 LDOmake shi
2012-10-24Merge remote branch 'fsl-linux-sdk/imx_3.0.35_12.11.01' into imx_3.0.35_andro...Xinyu Chen
2012-10-23ENGR00229785 pgc: disable display power gating when FB_MXC_ELCDIF_FB configuredRobby Cai
2012-10-19ENGR00229905-2: board-mx6q_sabreauto add i2c ad7280 deviceAdrian Alonso
2012-10-18ENGR00230377 Sabreauto: Add eCompass supportAlejandro Sierra
2012-10-18ENGR00229725 Sabreauto: Support NAND SPINOR NOR SD on same configAlejandro Sierra
2012-10-17ENGR00229902: mx6q sabreauto tvin use io_init callback functionAdrian Alonso
2012-10-16ENGR00229924 MX6SL-Fix MMDC FIFO reset code.Ranjani Vaidyanathan
2012-10-16ENGR00229695 MX6x-Set RBC counters correctly in STOP mode.Ranjani Vaidyanathan
2012-10-15ENGR00229708 [MX6SL] Fix all build warnings.Nancy Chen
2012-10-15ENGR00229441 MX6SL-Reset MMDC read FIFO in low power IDLERanjani Vaidyanathan
2012-10-13ENGR00229464 MX6SL-Update the SOC voltages based on datasheetRanjani Vaidyanathan
2012-10-12ENGR00229437 [MX6SL] Fix AHB clock not changed to 3MHz in IDLE modeNancy Chen
2012-10-12ENGR00229299 [MX6SL] Kernel cannot boot if enable LOCKDEPNancy Chen
2012-10-11ENGR00223797-15 MX6 SabreSD:fb0 late init and ipu1 bypass resetLiu Ying
2012-10-11ENGR00223797-12 MX6 sabresd clk:PWM1 clock default setting changeLiu Ying
2012-10-11ENGR00223797-11 MX6 clock:Protect IPU1 related clock treeLiu Ying
2012-10-11ENGR00223797-10 ARM:MX6 Kconfig:Support MX6_CLK_FOR_BOOTUI_TRANSLiu Ying
2012-10-11ENGR00223797-9 MX6DQ SabreSD:Switch IPU for LDB and HDMILiu Ying
2012-10-11ENGR00223797-8 MX6 SabreSD:Reserve primary fbmem with base addrLiu Ying
2012-10-11ENGR00223797-7 MX6 SabreSD:Fix ipuv3 fb platform driver registerLiu Ying
2012-10-11ENGR00223797-6 MX6 SabreSD:Initialize late init for IPUv3 fb pdataLiu Ying
2012-10-11ENGR00223797-5 MX6 SabreSD:Initialize bypass reset for IPUv3 pdataLiu Ying
2012-10-11ENGR00227869 mx6q: add GPU reserved memory size kernel parameterXinyu Chen
2012-10-09ENGR00227502-2 mx6sl: add csi v4l2 platform deviceRobby Cai
2012-10-09ENGR00227477 mx6qdl: system resume fail due to DDR not accessableAnson Huang
2012-10-09ENGR00227241 mx6sl: clk: sdhc can not work at lp idle modeRyan QIAN
2012-10-09ENGR00226392 MX6SL Bluetooth: Setup uart2 to enable bluetoothLionel Xu
2012-10-08ENGR00225700: ARM: mx6sl: Fix suspend/resume lockupRobert Lee
2012-10-08ENGR00227422: ARM: imx6sl: Adjust ARM and SOC stby voltagesRobert Lee
2012-10-08ENGR00227426 MX6SL-Fix bugs in low power IDLE modeRanjani Vaidyanathan
2012-10-09ENGR00227425 mx6sl: Need to save all registers before calling C functionAnson Huang
2012-10-09ENGR00227245 mx6q: Remove 400M setpoint for bus freqAnson Huang
2012-10-08ENGR00227249 MX6SL-Add support for low latency STANDBY mode.Ranjani Vaidyanathan
2012-10-08ENGR00227020: devices-common imx_dma_data duplicate struct definitionAdrian Alonso
2012-10-07ENGR00227250 MX6SL/MX6DL-Fix IRAM sizeRanjani Vaidyanathan
2012-09-29ENGR00225981-8 csi/imx6sl: add the platform-related settingRobby Cai
2012-09-29ENGR00225960-04 mx6sl evk: Add sii902x GPIO/IOMux settingSandor Yu
2012-09-29ENGR00225735-1 PU anatop: PU regulator can be disabled/enabled by driversRobin Gong
generated by cgit v1.2.3 (git 2.0.4) at 2024-12-28 05:39:31 +0000