summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2
AgeCommit message (Collapse)Author
2011-05-17omap: igep0020: add support for IGEP3Mike Rapoport
Add IGEP3 machine support to board-igep0020 Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-17omap: igep0020: minor refactoringMike Rapoport
to allow easy addition of IGEP3 Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-17omap: igep0020: name refactoring for future merge with IGEP3Mike Rapoport
IGEP2 and IGEP3 boards are very similar and can be merged into one file. Start refactoring with changing igep2 to igep where applicable. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-16Merge branch 'devel-genirq' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel-stable
2011-05-16arm: omap2/3: Use generic irq chipTony Lindgren
Use generic irq chip for omap2 & 3. Note that this patch also leaves out the spurious IRQ warning for omap3. This warning should no longer be needed as the interrupt handlers for various devices have implemented the necessayr read-back of the posted write. Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-13OMAP3: set the core dpll clk rate in its set_rate functionAvinash H.M
The debug l3_ick/rate is not displaying the actual rate of the clock in hardware. This is because, the core dpll set_rate function doesn't update the clk.rate. After fixing, the l3_ick/rate is displaying proper values. Signed-off-by: Shweta Gulati <shweta.gulati@ti.com> Signed-off-by: Avinash.H.M <avinashhm@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Paul Wamsley <paul@pwsan.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-12arm: omap2plus: GPIO cleanupIgor Grinberg
use gpio_request_<one|array>() instead of multiple gpiolib calls, remove unneeded variables, etc. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-11OMAP2PLUS: DSS2: Clean up omap_display_init()Archit Taneja
Currently, omap_display_init() maintains arrays for hwmod name(oh_name) and the correspnding platform_device name(dev_name) needed by omap_device_build(). A variable oh_count keeps a track of the number of devices to build from oh_name based on what omap revision it is. Clean this up by maintaining an array of omap_dss_hwmod_data struct which is defined for each omap revision as suggested by Tomi Valkeinen. Assign the corresponding omap_dss_hwmod_data array struct to the pointer curr_dss_hwmod in omap_display_init(). Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-05-11OMAP: DSS2: HDMI: Use dss_device clock configuration for HDMI PLL parametersArchit Taneja
Move some of the configurable HDMI PLL parameters to dssdev.clock struct. Cleanup the function hdmi_compute_pll() by using the parameters defined in the board file and do some cosmetic modifications. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-05-11OMAP: DSS2: Move panel-generic-dpi.h to include/video/Tomi Valkeinen
arch/arm/plat-omap/include/plat/panel-generic-dpi.h is an include for the OMAP DSS panel driver for generic DPI displays. A more logical place for it is in include/video. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-05-11OMAP: DSS2: Move display.h to include/video/Tomi Valkeinen
arch/arm/plat-omap/include/plat/display.h is an include for the OMAP DSS driver. A more logical place for it is in include/video. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-05-10treewide: fix a few typos in commentsJustin P. Mattock
- kenrel -> kernel - whetehr -> whether - ttt -> tt - sss -> ss Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-09omap: musb: introduce default board configMike Rapoport
Most boards use exactly the same configuration for musb initialization. Create a default that can be shared amount different boards. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-03omap: move detection of NAND CS to common-board-devicesMike Rapoport
and reduce amount of copy/paste Signed-off-by: Mike Rapoport <mike@compulab.co.il> CC: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-03omap: use common initialization for PMIC i2c busMike Rapoport
Introduce omap_pmic_init that registers i2c bus and PMIC device on that bus and add omap2/3/4 wrappers for common cases. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-03omap: consolidate touch screen initialization among different boardsMike Rapoport
Add common-board-devices.c that will contain the code for peripheral devices initializatoin shared between multiple boards. Start small with touchscreen initialization. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-03OMAP3+: voltage: remove spurious pr_notice for debugfsNishanth Menon
cat of debugfs entry for vp_volt provides voltage. The additional pr_notice is just spam on console and provides no additional information. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-03OMAP4: PM: remove redundant #ifdef CONFIG_PMNishanth Menon
pm44xx.c is built only when CONFIG_PM is setup, remove redundant CONFIG_PM check. This also fixes: https://bugzilla.kernel.org/show_bug.cgi?id=25022 Reported-by: Martin Etti <ettl.martin@gmx.de> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-03OMAP3+: smartreflex: delete debugfs entries on probe errorAaro Koskinen
Delete created debugfs entries if probe fails. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-05-03OMAP3+: smartreflex: delete instance from sr_list on probe errorAaro Koskinen
If the probe fails, the node should be deleted from sr_list. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-05-03OMAP3+: smartreflex: fix ioremap leak on probe errorAaro Koskinen
Add missing iounmap() to error paths. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-05-03OMAP3+: smartreflex: request the memory regionAaro Koskinen
We are releasing the memory region, but never actually request it. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-05-03OMAP3+: smartreflex: fix sr_late_init() error path in probeAaro Koskinen
sr_late_init() will take care of freeing the resources. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-05-03OMAP3/4: l3: minor cleanup for parenthesis and extra spacesomar ramirez
Removing extra lines, spaces and unneeded parenthesis. Collapsing an if statement to detect the type of error. l3_smx: - Fixing the message printed on error. So now: looks like: "No Error Error seen..." "No Error seen..." "In-Band Error Error seen..." "In-Band Error seen..." Other messages are self explanatory, no "Error" added to them. (E.g.: "Address Hole seen...") Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-03OMAP3/4: l3: fix omap3_l3_probe error pathomar ramirez
l3_smx: - Add missing free_irq and remove an empty goto label. l3_noc: - If kzalloc fails driver shouldn't continue with a NULL pointer. - Add missing free_irq and remove empty goto labels. - Safe to assume that if we reached the end point of execution without errors, then return value is 0, so replacing instead another goto. Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-03arm: omap: gpmc-smsc911x: minor style fixesIgor Grinberg
replace "printk(KERN_ERR" by "pr_err(" and fix needlessly multi-lined #ifdef Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-04-29OMAP2+ / PM: move runtime PM implementation to use device power domainsKevin Hilman
In commit 7538e3db6e015e890825fbd9f8659952896ddd5b (PM: add support for device power domains) a better way for handling platform-specific power hooks was introduced. Rather than using the platform_bus dev_pm_ops overrides (platform_bus_set_pm_ops()), this patch moves the OMAP runtime PM implementation over to using device power domains. Since OMAP is the only user of platform_bus_set_pm_ops(), that interface can be removed (and will be in a forthcoming patch.) [rjw: Rebased on top of a previous change modifying the handling of power domains by the PM core so that power domain callbacks take precendence over subsystem-level PM callbacks.] Signed-off-by: Kevin Hilman <khilman@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-04-27Merge branch 'for_tony_a_2.6.39rc' of git://git.pwsan.com/linux-2.6 into ↵Tony Lindgren
devel-fixes
2011-04-26OMAP3+: voltage: remove initial voltageNishanth Menon
Blindly setting 1.2V in the initial structure may not even match the default voltages stored in the voltage table which are supported for the domain. For example, OMAP3430 core domain does not use 1.2V and ends up generating a warning on the first transition. Further, since omap2_set_init_voltage is called as part of the pm framework's initialization sequence to configure the voltage required for the current OPP, the call does(and has to) setup the system voltage(curr_volt as a result) using the right mechanisms appropriate for the system at that point of time. This also overrides initialization we are currently doing in voltage.c making it redundant. So, remove the wrong and redundant initialization. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-04-26OMAP4: Intialize IVA Device in addition to DSP device.Shweta Gulati
OMAP4 has two different Devices IVA and DSP. DSP is bound with IVA for DVFS. The registration of IVA dev in API 'omap2_init_processor_devices' was missing. Init dev for 'iva_dev' is added. This also fixes the following error seen during boot as omap2_set_init_voltage can now find the iva device omap2_set_init_voltage: Invalid parameters! omap2_set_init_voltage: Unable to put vdd_iva to its init voltage Signed-off-by: Shweta Gulati <shweta.gulati@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-04-26omap: rx51: mark reserved memory earlierFelipe Contreras
So that omap_vram_set_sdram_vram() is called before omap_vram_reserve_sdram_memblock(). Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-04-26OMAP3: l3: fix for "irq 10: nobody cared" messageomar ramirez
If an error occurs in the L3 on any other initiator than MPU, the interrupt goes unhandled given that the 'base' register was calculated with the initialized err_source value (which coincidentally points to MPU) and not with the actual source of the error. Removed parenthesis that are not needed for the touched lines. Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-04-26arm: omap2: enable smc instruction for sleep34xxOskar Andero
This fixes broken build when using binutils 2.21. Signed-off-by: Oskar Andero <oskar.andero@sonyericsson.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-04-20OMAP2/3: hwmod: fix gpio-reset timeouts seen during bootup.Avinash.H.M
GPIO module expects the debounce clocks to be enabled during reset. It doesn't reset properly and timeouts are seen, if this clock isn't enabled during reset. Add the HWMOD_CONTROL_OPT_CLKS_IN_RESET flags to the GPIO HWMODs, with which the debounce clocks are enabled during reset. Cc: Rajendra Nayak <rnayak@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Avinash.H.M <avinashhm@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-04-20OMAP3: PM: Do not rely on ROM code to restore CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLLEduardo Valentin
As per OMAP3 erratum (i671), ROM code adds extra latencies while restoring CM_AUTOIDLE_PLL register, if AUTO_PERIPH_DPLL is equal to 1. This patch stores 0's in scratchpad content area corresponding to AUTO_PERIPH_DPLL, to prevent ROM code to try to lock per DPLL, since it won't respect proper programing scheme. This register is then stored in prcm context. The saving and restore is now done by kernel side. Here follow the erratum description DESCRIPTION After OFF mode transition, among many restorations, the ROM Code restores the CM_AUTOIDLE_PLL register, and after that, it tries to relock the PER DPLL. In case the restoration data stored in scratchpad memory contains a field CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL = 1, then the way the ROM Code restores and locks the PER DPLL does not respect the PER DPLL programming scheme. In that case, the DPLL might not lock. Meanwhile, when trying to lock the PER DPLL, the ROM Code does not hang. Only extra latencies are introduced at wake-up. WORKAROUND When saving the context-restore structure in scratchpad memory, in order to respect the PER DPLL programming scheme, it is advised to store 0 in the CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL field of the saved structure. After wake-up, the application should store in CM_AUTOIDLE_PLL register the right desired value. Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-04-20OMAP2+: PM: Fix the saving of CM_AUTOIDLE_PLL register on scratchpad areaEduardo Valentin
The saving of CCR.CM_AUTOIDLE_PLL is done in scratchpad area. However, in current code, the saving is done for CM_AUTOIDLE2_PLL (offset 0x34) instead of CM_AUTOIDLE_PLL (offset 0x30). This patch changes the code to save the correct register. Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-04-20OMAP4: clock data: Change DSS clock aliasesTomi Valkeinen
DSS driver has used fck and ick clocks on OMAP2/3 to get DSS HW up and running, and also to get the pixel clock's source clock rate from the fck. On OMAP4 the clock data is set up in a different way, as there's no ick, dss_fck points to a fake clock which just affects DSS's MODULEMODE, and dss_dss_clk if the DSS_FCK. >From DSS driver's point of view the dss_fck sounds like an ick, and dss_dss_clk is the fck. While this is not entirely correct from HW point of view, especially for the ick, configuring the clock aliases that way makes DSS "just work" with OMAP4's clock setup. In the (hopefully near) future DSS driver will be reworked to use pm_runtime support which should clean up the clock code. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Benoît Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-04-20omap: convert boards that use SMSC911x to use gpmc-smsc911xMike Rapoport
Convert boards that use SMSC911x to use gpmc-smsc911x. Also allocate struct platform_device dynamically. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> [tony@atomide.com: folded in a fix from Igor Grindberg] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-04-20omap: gpmc-smsc911x: always set irq flags to IORESOURCE_IRQ_LOWLEVELMike Rapoport
SMSC911x devices attached to OMAP GPMC always use low level irqs. Setting the appropriate flag in the irq resourse strucure allows using .flags field in the omap_smsc911x_platform_data for driver specific flags Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-04-20ARM: RX-51: Enable isp1704 power on/offKalle Jokiniemi
The isp1704 usb tranceiver is used for charging and can be disabled when not in use. Provide the powering routine to the driver via platform data. Also changed the indent of ".name" variable in rx51_charger_device definition to use tabs same way as the new ".dev" variable indent. Put this in the same patch since the indent fix is only needed when there are multiple members in the struct definition. Loosely based on earlier patches from Heikki Krogerus in Nokia N900 maemo kernel. Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@nokia.com> Acked-By: Heikki Krogerus <heikki.krogerus@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-04-19OMAP2+: hwmod data: Fix wrong dma_system end addressBenoit Cousson
OMAP2420, 2430 and 3xxx were using the OMAP4 end address that unfortunately is not located at the same base address. Moreover the OMAP4 size was set to 256 instead of 4096. Change all .pa_end to set them to .pa_start + 0xfff Cc: "G, Manjunath Kondaiah" <manjugk@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Reported-by: Michael Fillinger <m-fillinger@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-04-04ARM: 6860/1: OMAP4: Move the privately used SMP boot functions to OMAP ↵Santosh Shilimkar
specific header. Header files in arch/arm/*/include/mach included from arch/arm/include/asm/*.h are there to provide necessary definitions for either the rest of the kernel or the ARM specific parts. They shouldn't be polluted with *any* platform private stuff which is not absolutely necessary to satisfy the rest of the kernel. Hence move the OMAP specific SMP boot functions to different header instead of keeping them in 'plat/smp.h' which gets included indirectly by linux/smp.h The patch is outcome of the discussion in below thread: http://www.spinics.net/lists/arm-kernel/msg120363.html Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-29arm: Fold irq_set_chip/irq_set_handlerThomas Gleixner
Use irq_set_chip_and_handler() instead. Converted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29arm: Cleanup the irq namespaceThomas Gleixner
Convert to the new function names. Automated with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-27Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: hwspinlock: depend on OMAP4 ARM: OMAP2+: Fix warnings for GPMC interrupt OMAP4: PandaBoard: remove unused power regulators arm: mach-omap2: omap_l3_smx: fix irq handler setup arm: mach-omap2: devices: fix omap3_l3_init() return value
2011-03-24Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (442 commits) [media] videobuf2-dma-contig: make cookie() return a pointer to dma_addr_t [media] sh_mobile_ceu_camera: Do not call vb2's mem_ops directly [media] V4L: soc-camera: explicitly require V4L2_BUF_TYPE_VIDEO_CAPTURE [media] v4l: soc-camera: Store negotiated buffer settings [media] rc: interim support for 32-bit NEC-ish scancodes [media] mceusb: topseed 0x0011 needs gen3 init for tx to work [media] lirc_zilog: error out if buffer read bytes != chunk size [media] lirc: silence some compile warnings [media] hdpvr: use same polling interval as other OS [media] ir-kbd-i2c: pass device code w/key in hauppauge case [media] rc/keymaps: Remove the obsolete rc-rc5-tv keymap [media] remove the old RC_MAP_HAUPPAUGE_NEW RC map [media] rc/keymaps: Rename Hauppauge table as rc-hauppauge [media] rc-rc5-hauppauge-new: Fix Hauppauge Grey mapping [media] rc-rc5-hauppauge-new: Add support for the old Black RC [media] rc-rc5-hauppauge-new: Add the old control to the table [media] rc-winfast: Fix the keycode tables [media] a800: Fix a few wrong IR key assignments [media] opera1: Use multimedia keys instead of an app-specific mapping [media] dw2102: Use multimedia keys instead of an app-specific mapping ... Fix up trivial conflicts (remove/modify and some real conflicts) in: arch/arm/mach-omap2/devices.c drivers/staging/Kconfig drivers/staging/Makefile drivers/staging/dabusb/dabusb.c drivers/staging/dabusb/dabusb.h drivers/staging/easycap/easycap_ioctl.c drivers/staging/usbvideo/usbvideo.c drivers/staging/usbvideo/vicam.c
2011-03-24Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (90 commits) mfd: Push byte swaps out of wm8994 bulk read path mfd: Rename ab8500 gpadc header mfd: Constify WM8994 write path mfd: Push byte swap out of WM8994 bulk I/O mfd: Avoid copying data in WM8994 I2C write mfd: Remove copy from WM831x I2C write function mfd: Staticise WM8994 PM ops regulator: Add a subdriver for TI TPS6105x regulator portions v2 mfd: Add a core driver for TI TPS61050/TPS61052 chips v2 gpio: Add Tunnel Creek support to sch_gpio mfd: Add Tunnel Creek support to lpc_sch pci_ids: Add Intel Tunnel Creek LPC Bridge device ID. regulator: MAX8997/8966 support mfd: Add WM8994 bulk register write operation mfd: Append additional read write on 88pm860x mfd: Adopt mfd_data in 88pm860x input driver mfd: Adopt mfd_data in 88pm860x regulator mfd: Adopt mfd_data in 88pm860x led mfd: Adopt mfd_data in 88pm860x backlight mfd: Fix MAX8997 Kconfig entry typos ...
2011-03-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6: (140 commits) MAINTAINERS: de-orphan fbdev. MAINTAINERS: Add file pattern for fb dt bindings. video: Move sm501fb devicetree binding documentation to a better place. fbcon: fix situation where fbcon gets deinitialised and can't reinit. video, sm501: add OF binding to support SM501 video, sm501: add edid and commandline support video, sm501: add I/O functions for use on powerpc video: Fix EDID macros H_SYNC_WIDTH and H_SYNC_OFFSET fbcon: Bugfix soft cursor detection in Tile Blitting video: add missing framebuffer_release in error path video: metronomefb: add __devexit_p around reference to metronomefb_remove video: hecubafb: add __devexit_p around reference to hecubafb_remove drivers:video:aty:radeon_base Fix typo occationally to occasionally atmel_lcdfb: add fb_blank function atmel_lcdfb: implement inverted contrast pwm video: s3c-fb: return proper error if clk_get fails uvesafb,vesafb: create WC or WB PAT-entries video: ffb: fix ffb_probe error path radeonfb: Let hwmon driver probe the "monid" I2C bus fbdev: sh_mobile_lcdc: checking NULL instead of IS_ERR() ...
2011-03-23Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (35 commits) ARM: Update (and cut down) mach-types ARM: 6771/1: vexpress: add support for multiple core tiles ARM: 6797/1: hw_breakpoint: Fix newlines in WARNings ARM: 6751/1: vexpress: select applicable errata workarounds in Kconfig ARM: 6753/1: omap4: Enable ARM local timers with OMAP4430 es1.0 exception ARM: 6759/1: smp: Select local timers vs broadcast timer support runtime ARM: pgtable: add pud-level code ARM: 6673/1: LPAE: use phys_addr_t instead of unsigned long for start of membanks ARM: Use long long format when printing meminfo physical addresses ARM: integrator: add Integrator/CP sched_clock support ARM: realview/vexpress: consolidate SMP bringup code ARM: realview/vexpress: consolidate localtimer support ARM: integrator/versatile: consolidate FPGA IRQ handling code ARM: rationalize versatile family Kconfig/Makefile ARM: realview: remove old AMBA device DMA definitions ARM: versatile: remove old AMBA device DMA definitions ARM: vexpress: use new init_early for clock tree and sched_clock init ARM: realview: use new init_early for clock tree and sched_clock init ARM: versatile: use new init_early for clock tree and sched_clock init ARM: integrator: use new init_early for clock tree init ...
generated by cgit v1.2.3 (git 2.0.4) at 2024-10-04 11:23:52 +0000