summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2
AgeCommit message (Collapse)Author
2012-05-20ARM: OMAP: Revert "ARM: OMAP: ctrl: Fix CONTROL_DSIPHY register fields"Archit Taneja
commit 08ca7444f589bedf9ad5d82883e5d0754852d73b upstream. This reverts commit 46f8c3c7e95c0d30d95911e7975ddc4f93b3e237. The commit above swapped the DSI1_PPID and DSI2_PPID register fields in CONTROL_DSIPHY to be in sync with the newer public OMAP TRMs(after version V). With this commit, contention errors were reported on DSI lanes some OMAP4 SDPs. After probing the DSI lanes on OMAP4 SDP, it was seen that setting bits in the DSI2_PPID field was pulling up voltage on DSI1 lanes, and DSI1_PPID field was pulling up voltage on DSI2 lanes. This proves that the current version of OMAP4 TRM is incorrect, swap the position of register fields according to the older TRM versions as they were correct. Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-03-12ARM: OMAP: fix iommu, not mailboxOhad Ben-Cohen
commit 134d12fae0bb8f3d60dc7440a9e1950bb5427167 upstream. For some weird (freudian?) reason, commit 435792d "ARM: OMAP: make iommu subsys_initcall to fix builtin omap3isp" unintentionally changed the mailbox's initcall instead of the iommu's. Fix that. Reported-by: Fernando Guzman Lugo <fernando.lugo@ti.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Joerg Roedel <Joerg.Roedel@amd.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12OMAPDSS: HDMI: PHY burnout fixTomi Valkeinen
commit c49d005b6cc8491fad5b24f82805be2d6bcbd3dd upstream. A hardware bug in the OMAP4 HDMI PHY causes physical damage to the board if the HDMI PHY is kept powered on when the cable is not connected. This patch solves the problem by adding hot-plug-detection into the HDMI IP driver. This is not a real HPD support in the sense that nobody else than the IP driver gets to know about the HPD events, but is only meant to fix the HW bug. The strategy is simple: If the display device is turned off by the user, the PHY power is set to OFF. When the display device is turned on by the user, the PHY power is set either to LDOON or TXON, depending on whether the HDMI cable is connected. The reason to avoid PHY OFF when the display device is on, but the cable is disconnected, is that when the PHY is turned OFF, the HDMI IP is not "ticking" and thus the DISPC does not receive pixel clock from the HDMI IP. This would, for example, prevent any VSYNCs from happening, and would thus affect the users of omapdss. By using LDOON when the cable is disconnected we'll avoid the HW bug, but keep the HDMI working as usual from the user's point of view. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12OMAP: 4430SDP/Panda: add HDMI HPD gpioTomi Valkeinen
commit aa74274b464d4aa24703963ac89a0ee942d5d267 upstream. Both Panda and 4430SDP use GPIO 63 as HDMI hot-plug-detect. Configure this GPIO in the board files. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12OMAP: 4430SDP/Panda: setup HDMI GPIO muxesTomi Valkeinen
commit 78a1ad8f12db70b8b0a4548b90704de08ee216ce upstream. The HDMI GPIO pins LS_OE and CT_CP_HPD are not currently configured. This patch configures them as output pins. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12OMAPDSS: remove wrong HDMI HPD muxingTomi Valkeinen
commit 7bb122d155f742fe2d79849090c825be7b4a247e upstream. "hdmi_hpd" pin is muxed to INPUT and PULLUP, but the pin is not currently used, and in the future when it is used, the pin is used as a GPIO and is board specific, not an OMAP4 wide thing. So remove the muxing for now. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12OMAP: 4430SDP/Panda: rename HPD GPIO to CT_CP_HPDTomi Valkeinen
commit 3932a32fcf5393f8be70ac99dc718ad7ad0a415b upstream. The GPIO 60 on 4430sdp and Panda is not HPD GPIO, as currently marked in the board files, but CT_CP_HPD, which is used to enable/disable HPD functionality. This patch renames the GPIO. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12OMAP: 4430SDP/Panda: use gpio_free_array to free HDMI gpiosTomi Valkeinen
commit 575753e3bea3b67eef8e454fb87f719e3f7da599 upstream. Instead of freeing the GPIOs individually, use gpio_free_array(). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12ARM: OMAP: make iommu subsys_initcall to fix builtin omap3ispOhad Ben-Cohen
commit 435792d93410f008120c4dbab148019a3cc31dbc upstream. omap3isp depends on omap's iommu and will fail to probe if initialized before it (which always happen if they are builtin). Make omap's iommu subsys_initcall as an interim solution until the probe deferral mechanism is merged. Reported-by: James <angweiyang@gmail.com> Debugged-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Hiroshi Doyu <hdoyu@nvidia.com> Cc: Joerg Roedel <Joerg.Roedel@amd.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-29ARM: omap: fix oops in arch/arm/mach-omap2/vp.c when pmic is not foundRussell King
commit d980e0f8d858c6963d676013e976ff00ab7acb2b upstream. When the PMIC is not found, voltdm->pmic will be NULL. vp.c's initialization function tries to dereferences this, which causes an oops: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT Modules linked in: CPU: 0 Not tainted (3.3.0-rc2+ #204) PC is at omap_vp_init+0x5c/0x15c LR is at omap_vp_init+0x58/0x15c pc : [<c03db880>] lr : [<c03db87c>] psr: 60000013 sp : c181ff30 ip : c181ff68 fp : c181ff64 r10: c0407808 r9 : c040786c r8 : c0407814 r7 : c0026868 r6 : c00264fc r5 : c040ad6c r4 : 00000000 r3 : 00000040 r2 : 000032c8 r1 : 0000fa00 r0 : 000032c8 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 80004019 DAC: 00000015 Process swapper (pid: 1, stack limit = 0xc181e2e8) Stack: (0xc181ff30 to 0xc1820000) ff20: c0381d00 c02e9c6d c0383582 c040786c ff40: c040ad6c c00264fc c0026868 c0407814 00000000 c03d9de4 c181ff8c c181ff68 ff60: c03db448 c03db830 c02e982c c03fdfb8 c03fe004 c0039988 00000013 00000000 ff80: c181ff9c c181ff90 c03d9df8 c03db390 c181ffdc c181ffa0 c0008798 c03d9df0 ffa0: c181ffc4 c181ffb0 c0055a44 c0187050 c0039988 c03fdfb8 c03fe004 c0039988 ffc0: 00000013 00000000 00000000 00000000 c181fff4 c181ffe0 c03d1284 c0008708 ffe0: 00000000 c03d1208 00000000 c181fff8 c0039988 c03d1214 1077ce40 01f7ee08 Backtrace: [<c03db824>] (omap_vp_init+0x0/0x15c) from [<c03db448>] (omap_voltage_late_init+0xc4/0xfc) [<c03db384>] (omap_voltage_late_init+0x0/0xfc) from [<c03d9df8>] (omap2_common_pm_late_init+0x14/0x54) r8:00000000 r7:00000013 r6:c0039988 r5:c03fe004 r4:c03fdfb8 [<c03d9de4>] (omap2_common_pm_late_init+0x0/0x54) from [<c0008798>] (do_one_initcall+0x9c/0x164) [<c00086fc>] (do_one_initcall+0x0/0x164) from [<c03d1284>] (kernel_init+0x7c/0x120) [<c03d1208>] (kernel_init+0x0/0x120) from [<c0039988>] (do_exit+0x0/0x2cc) r5:c03d1208 r4:00000000 Code: e5ca300b e5900034 ebf69027 e5994024 (e5941000) ---[ end trace aed617dddaf32c3d ]--- Kernel panic - not syncing: Attempted to kill init! Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13ARM: OMAP2+: GPMC: fix device size setupYegor Yefremov
commit 8ef5d844cc3a644ea6f7665932a4307e9fad01fa upstream. following statement can only change device size from 8-bit(0) to 16-bit(1), but not vice versa: regval |= GPMC_CONFIG1_DEVICESIZE(wval); so as this field has 1 reserved bit, that could be used in future, just clear both bits and then OR with the desired value Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2011-12-20Merge branch 'fixes-hwmod-regression' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
2011-12-15ARM: OMAP: hwmod data: fix iva and mailbox hwmods for OMAP 3Felipe Contreras
Seems the commit 7e89098 was overly aggressive in adding iva and mailbox hwmods so now they are registered twice. ------------[ cut here ]------------ WARNING: at arch/arm/mach-omap2/omap_hwmod.c:1959 omap_hwmod_register+0x104/0x12c() omap_hwmod: iva: _register returned -22 Modules linked in: [<c0012aa4>] (unwind_backtrace+0x0/0xec) from [<c002f970>] (warn_slowpath_common+0x4c/0x64) [<c002f970>] (warn_slowpath_common+0x4c/0x64) from [<c002fa08>] (warn_slowpath_fmt+0x2c/0x3c) [<c002fa08>] (warn_slowpath_fmt+0x2c/0x3c) from [<c02fdb4c>] (omap_hwmod_register+0x104/0x12c) [<c02fdb4c>] (omap_hwmod_register+0x104/0x12c) from [<c02fbb44>] (omap3_init_early+0x1c/0x28) [<c02fbb44>] (omap3_init_early+0x1c/0x28) from [<c02f9580>] (setup_arch+0x6b8/0x7a4) [<c02f9580>] (setup_arch+0x6b8/0x7a4) from [<c02f754c>] (start_kernel+0x6c/0x264) [<c02f754c>] (start_kernel+0x6c/0x264) from [<80008040>] (0x80008040) ---[ end trace 1b75b31a2719ed1c ]--- ------------[ cut here ]------------ WARNING: at arch/arm/mach-omap2/omap_hwmod.c:1959 omap_hwmod_register+0x104/0x12c() omap_hwmod: mailbox: _register returned -22 Modules linked in: [<c0012aa4>] (unwind_backtrace+0x0/0xec) from [<c002f970>] (warn_slowpath_common+0x4c/0x64) [<c002f970>] (warn_slowpath_common+0x4c/0x64) from [<c002fa08>] (warn_slowpath_fmt+0x2c/0x3c) [<c002fa08>] (warn_slowpath_fmt+0x2c/0x3c) from [<c02fdb4c>] (omap_hwmod_register+0x104/0x12c) [<c02fdb4c>] (omap_hwmod_register+0x104/0x12c) from [<c02fbb44>] (omap3_init_early+0x1c/0x28) [<c02fbb44>] (omap3_init_early+0x1c/0x28) from [<c02f9580>] (setup_arch+0x6b8/0x7a4) [<c02f9580>] (setup_arch+0x6b8/0x7a4) from [<c02f754c>] (start_kernel+0x6c/0x264) [<c02f754c>] (start_kernel+0x6c/0x264) from [<80008040>] (0x80008040) ---[ end trace 1b75b31a2719ed1d ]--- Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-12-13ARM: OMAP: rx51: fix USBFelipe Contreras
Commit 10299e2e4e3ed3b16503d4e04edd48b33083f4e2 (ARM: RX-51: Enable isp1704 power on/off) added power management for isp1704. However, the transceiver should be powered on by default, otherwise USB doesn't work at all for networking during boot. All kernels after v3.0 are affected. Cc: stable@kernel.org Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Reviewed-by: Sebastian Reichel <sre@debian.org> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-12ARM: OMAP: mcbsp: Fix possible memory corruptionJarkko Nikula
Commits 09d28d ("ARM: OMAP: mcbsp: Start generalize omap2_mcbsp_set_clks_src") and 7bc0c4 ("ARM: OMAP: mcbsp: Start generalize signal muxing functions") incorrectly set two struct omap_mcbsp_platform_data fields after omap_device_build_ss and kfree calls. Fix this by moving these pdata assignments before those calls. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Reported-by: NeilBrown <neilb@suse.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-24Merge branch 'fixes-dss' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
2011-11-23Merge branch 'fixes-v3.2-rc2' into fixesTony Lindgren
2011-11-23ARM: OMAP2+: Fix Compilation error when omap_l3_noc built as moduleGovindraj.R
Fix below compilation failure on mainline kernel 3.2-rc1 when omap_l3_noc.c is built as module. arch/arm/mach-omap2/omap_l3_noc.c:240: error: expected ',' or ';' before 'MODULE_DEVICE_TABLE' Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-23ARM: OMAP2+: Remove empty io.hThomas Weber
The file arch/arm/mach-omap2/io.h is empty, so we can remove it. Signed-off-by: Thomas Weber <weber@corscience.de> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-23ARM: OMAP2: select ARM_AMBA if OMAP3_EMU is definedMing Lei
This patch selects ARM_AMBA if OMAP3_EMU is defined because OC_ETM depends on ARM_AMBA, so fix the link failure[1]. [1], arch/arm/kernel/built-in.o: In function `etm_remove': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:609: undefined reference to `amba_release_regions' arch/arm/kernel/built-in.o: In function `etb_remove': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:409: undefined reference to `amba_release_regions' arch/arm/kernel/built-in.o: In function `etm_init': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:640: undefined reference to `amba_driver_register' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:646: undefined reference to `amba_driver_register' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:648: undefined reference to `amba_driver_unregister' arch/arm/kernel/built-in.o: In function `etm_probe': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:545: undefined reference to `amba_request_regions' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:595: undefined reference to `amba_release_regions' arch/arm/kernel/built-in.o: In function `etb_probe': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:347: undefined reference to `amba_request_regions' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:392: undefined reference to `amba_release_regions' arch/arm/mach-omap2/built-in.o: In function `emu_init': /home/tom/git/omap/linux-2.6-omap/arch/arm/mach-omap2/emu.c:62: undefined reference to `amba_device_register' /home/tom/git/omap/linux-2.6-omap/arch/arm/mach-omap2/emu.c:63: undefined reference to `amba_device_register' make: *** [.tmp_vmlinux1] Error 1 making modules Signed-off-by: Ming Lei <tom.leiming@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-23ARM: OMAP: smartreflex: fix IRQ handling bugFelipe Balbi
Fix a bug which has been on this driver since it was added by the original commit 984aa6db which would never clear IRQSTATUS bits. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com> Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-23ARM: OMAP: PM: only register TWL with voltage layer when device is presentKevin Hilman
Current code registers voltage layer details for TWL PMIC even when a TWL has not been registered. Fix this to only register the TWL with voltage layer when the TWL PMIC is initialized by board-level code. Signed-off-by: Kevin Hilman <khilman@ti.com> Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-23ARM: OMAP: hwmod: Fix the addr space, irq, dma count APIssricharan
The address spaces, irqs and dma reqs count APIs return the number of corresponding entries in a hwmod including a additional null value or a -1 terminator in the structure introduced recently. More information here: - 212738a4: omap_hwmod: use a terminator record with omap_hwmod_mpu_irqs arrays - 78183f3f: omap_hwmod: use a null structure record to terminate omap_hwmod_addr_space arrays - bc614958: omap_hwmod: use a terminator record with omap_hwmod_dma_info arrays The issue with irqs and dma info was originally reported by Benoit Cousson. The devices which have multiple hwmods and use device_build_ss are broken with this, as their resources are populated with a extra null value, subsequently the probe fails. So fix the API not to include the array terminator in the count. Reported-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimar@ti.com> Signed-off-by: sricharan <r.sricharan@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-08ARM: OMAP2PLUS: DSS: Ensure DSS works correctly if display is enabled in ↵Archit Taneja
bootloader Resetting DISPC when a DISPC output is enabled causes the DSS to go into an inconsistent state. Thus if the bootloader has enabled a display, the hwmod code cannot reset the DISPC module just like that, but the outputs need to be disabled first. Add function dispc_disable_outputs() which disables all active overlay manager and ensure all frame transfers are completed. Modify omap_dss_reset() to call this function and clear DSS_CONTROL, DSS_SDI_CONTROL and DSS_PLL_CONTROL so that DSS is in a clean state when the DSS2 driver starts. This resolves the hang issue(caused by a L3 error during boot) seen on the beagle board C3, which has a factory bootloader that enables display. The issue is resolved with this patch. Thanks to Tomi and Sricharan for some additional testing. Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: R, Sricharan <r.sricharan@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> [paul@pwsan.com: restructured code, removed omap_{read,write}l(), removed cpu_is_omap*() calls and converted to dev_attr] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-11-08ARM: OMAP: HWMOD: Unify DSS resets for OMAPsTomi Valkeinen
This patch adds a custom DSS reset function used on OMAPs from OMAP2 forward. The function doesn't actually do a reset, it only waits for the reset to complete. The reason for this is that on OMAP4 there is no possibility to do a SW reset, and on OMAP2/3 doing a SW reset for dss_core resets all the other DSS modules also, thus breaking the HWMOD model where every DSS module is handled independently. This fixes the problem with DSS reset on OMAP4, caused by the fact that because there's no SW reset for dss_core on OMAP4, the HWMOD framework doesn't try to reset dss_core and thus the DSS clocks were never enabled at the same time. This causes causes the HWMOD reset to fail for dss_dispc and dss_rfbi. The common reset function will also allow us to fix another problem in the future: before doing a reset we need to disable DSS outputs, which are in some cases enabled by the bootloader, as otherwise DSS HW seems to get more or less stuck, requiring a power reset to recover. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> [paul@pwsan.com: modified to build arch/arm/mach-omap2/display.o unconditionally to avoid an error when !CONFIG_OMAP2_DSS] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-11-08ARM: OMAP2/3: HWMOD: Add SYSS_HAS_RESET_STATUS for dssTomi Valkeinen
OMAP2/3 dss_core has a reset status flag in sysstatus register. Add SYSS_HAS_RESET_STATUS flag to HWMOD data so it can be used. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-11-08ARM: OMAP4: HWMOD: fix DSS clock dataTomi Valkeinen
The OMAP4 HWMOD data currently contains errors with DSS clocks: dss_hdmi and dss_venc have their main_clks wrong. The clocks should be dss_48mhz_clk and dss_tv_clk, respectively. These problems were temporarily fixed with the DSS patches 9ede365aa6f74428a1f69c21ca1cf21213167576 ("HACK: OMAP: DSS2: clk hack for OMAP2/3"), and df5d3ed23cf73ee0763a8963003bda9b69d9620f ("OMAP: DSS2: HDMI: fix hdmi clock name"), which can be reverted after this patch. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-11-08ARM: OMAP4: HWMOD: Add HWMOD_CONTROL_OPT_CLKS_IN_RESET for dss_coreTomi Valkeinen
DSS needs all DSS clocks to be enabled to be able to finish reset properly. Before v3.1-rc1 the omapdss driver was managing clocks and resets correctly. However, when omapdss started using runtime PM at v3.1-rc1, the responsibility for the reset moved to HWMOD framework. HWMOD framework does not currently enable all the DSS clocks when resetting the DSS hardware. This causes the HWMOD frameworks boot-time reset to fail, possibly leaving the DSS hardware in undefined state. This patch sets HWMOD_CONTROL_OPT_CLKS_IN_RESET for dss_core. The flag is actually not used on OMAP4, because dss_core hardware does not have soft-reset functionality and thus the HWMOD framework never resets nor waits for the reset to finish. However, while the flag is not strictly needed currently, I think it represents the HW correctly: all the DSS clocks should be enabled after power-on to allow DSS hardware to finish its reset. A custom reset function will be added in the following patches which manages this correctly for OMAP4. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-11-08ARM: OMAP4: HWMOD: remove extra clocksTomi Valkeinen
Remove the dss_dss_clk from dss_core's opt-clocks. dss_dss_clk already defined as the dss main_clk, and thus is not needed as an opt-clock. Remove opt-clocks for dss_dispc, as dispc only uses the main_clk. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-11-08ARM: OMAP3: HWMOD: fix DSS clock dataTomi Valkeinen
The OMAP3 HWMOD data currently contains these errors with DSS clocks: - dss_rfbi is missing ick opt-clock, which is needed for RFBI to calculate timings - dss_dsi is missing ick and sys_clk - dss_venc is missing dss_96m_fck opt-clock, which is required on OMAP3430 - dss_venc's interface and main clocks are wrong, causing VENC to fail to start These problems were temporarily fixed with a DSS patch 9ede365aa6f74428a1f69c21ca1cf21213167576 ("HACK: OMAP: DSS2: clk hack for OMAP2/3"), which can be reverted after this patch (and the similar patches for other OMAPs). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-11-08ARM: OMAP3: HWMOD: Fix DSS resetTomi Valkeinen
DSS needs all DSS clocks to be enabled to be able to finish reset properly. Before v3.1-rc1 the omapdss driver was managing clocks and resets correctly. However, when omapdss started using runtime PM at v3.1-rc1, the responsibility for the reset moved to HWMOD framework. HWMOD framework does not currently enable all the DSS clocks when resetting the DSS hardware. This hasn't caused any problems so far, but we may just have been lucky. dss_core's opt-clocks is also missing dss_96m_fck, which is a DSS clock present only on OMAP3430, and thus required on OMAP3430 to finish the reset. This patch sets HWMOD_CONTROL_OPT_CLKS_IN_RESET and adds the dss_96m_fck opt-clock for dss_core in OMAP3 HWMOD data, fixing the issue. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> [paul@pwsan.com: merged duplicate .flags fields] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-11-08ARM: OMAP2xxx: HWMOD: fix DSS clock dataTomi Valkeinen
The OMAP2xxx HWMOD data currently contains two errors with DSS clocks: - dss_rfbi is missing ick opt-clock, which is needed for RFBI to calculate timings - dss_venc's interface and main clocks are wrong, causing VENC to fail to start These problems were temporarily fixed with a DSS patch 9ede365aa6f74428a1f69c21ca1cf21213167576 ("HACK: OMAP: DSS2: clk hack for OMAP2/3"), which can be reverted after this patch (and the similar patches for other OMAPs). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-11-08ARM: OMAP2xxx: HWMOD: Fix DSS resetTomi Valkeinen
DSS needs all DSS clocks to be enabled to be able to finish reset properly. Before v3.1-rc1 the omapdss driver was managing clocks and resets correctly. However, when omapdss started using runtime PM at v3.1-rc1, the responsibility for the reset moved to HWMOD framework. HWMOD framework does not currently enable all the DSS clocks when resetting the DSS hardware. This hasn't caused any problems so far, but we may just have been lucky. This patch sets HWMOD_CONTROL_OPT_CLKS_IN_RESET for dss_core in OMAP2xxx HWMOD data, fixing the issue. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> [paul@pwsan.com: merged duplicate .flags fields] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-11-07Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (31 commits) ARM: OMAP: Fix export.h or module.h includes ARM: OMAP: omap_device: Include linux/export.h ARM: OMAP2: Fix H4 matrix keyboard warning ARM: OMAP1: Remove unused omap-alsa.h ARM: OMAP1: Fix warnings about enabling 32 KiHz timer ARM: OMAP2+: timer: Remove omap_device_pm_latency ARM: OMAP2+: clock data: Remove redundant timer clkdev ARM: OMAP: Devkit8000: Remove double omap_mux_init_gpio ARM: OMAP: usb: musb: OMAP: Delete unused function MAINTAINERS: Update linux-omap git repository ARM: OMAP: change get_context_loss_count ret value to int ARM: OMAP4: hsmmc: configure SDMMC1_DR0 properly ARM: OMAP4: hsmmc: Fix Pbias configuration on regulator OFF ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from common list ARM: OMAP: I2C: Fix omap_register_i2c_bus() return value on success ARM: OMAP: dmtimer: Include linux/module.h ARM: OMAP2+: l3-noc: Include linux/module.h ARM: OMAP2+: devices: Fixes for McPDM ARM: OMAP: Fix errors and warnings when building for one board ARM: OMAP3: PM: restrict erratum i443 handling to OMAP3430 only ...
2011-11-07ARM: OMAP3: CPUidle: include <linux/export.h>Kevin Hilman
The CPUidle use THIS_MODULE, so needs <linux/export.h> Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-07Merge branch 'fixes-modulesplit' into fixesTony Lindgren
2011-11-07ARM: OMAP: Fix export.h or module.h includesTony Lindgren
Commit 32aaeffbd4a7457bf2f7448b33b5946ff2a960eb (Merge branch 'modsplit-Oct31_2011'...) caused some build errors. Fix these and make sure we always have export.h or module.h included for MODULE_ and EXPORT_SYMBOL users: $ grep -rl ^MODULE_ arch/arm/*omap*/*.c | xargs \ grep -L linux/module.h arch/arm/mach-omap2/dsp.c arch/arm/mach-omap2/mailbox.c arch/arm/mach-omap2/omap-iommu.c arch/arm/mach-omap2/smartreflex.c Also check we either have export.h or module.h included for the files exporting symbols: $ grep -rl EXPORT_SYMBOL arch/arm/*omap*/*.c | xargs \ grep -L linux/export.h | xargs grep -L linux/module.h Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-07Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: cpuidle: Single/Global registration of idle states cpuidle: Split cpuidle_state structure and move per-cpu statistics fields cpuidle: Remove CPUIDLE_FLAG_IGNORE and dev->prepare() cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state ACPI: Fix CONFIG_ACPI_DOCK=n compiler warning ACPI: Export FADT pm_profile integer value to userspace thermal: Prevent polling from happening during system suspend ACPI: Drop ACPI_NO_HARDWARE_INIT ACPI atomicio: Convert width in bits to bytes in __acpi_ioremap_fast() PNPACPI: Simplify disabled resource registration ACPI: Fix possible recursive locking in hwregs.c ACPI: use kstrdup() mrst pmu: update comment tools/power turbostat: less verbose debugging
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-06cpuidle: Single/Global registration of idle statesDeepthi Dharwar
This patch makes the cpuidle_states structure global (single copy) instead of per-cpu. The statistics needed on per-cpu basis by the governor are kept per-cpu. This simplifies the cpuidle subsystem as state registration is done by single cpu only. Having single copy of cpuidle_states saves memory. Rare case of asymmetric C-states can be handled within the cpuidle driver and architectures such as POWER do not have asymmetric C-states. Having single/global registration of all the idle states, dynamic C-state transitions on x86 are handled by the boot cpu. Here, the boot cpu would disable all the devices, re-populate the states and later enable all the devices, irrespective of the cpu that would receive the notification first. Reference: https://lkml.org/lkml/2011/4/25/83 Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Trinabh Gupta <g.trinabh@gmail.com> Tested-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-06cpuidle: Split cpuidle_state structure and move per-cpu statistics fieldsDeepthi Dharwar
This is the first step towards global registration of cpuidle states. The statistics used primarily by the governor are per-cpu and have to be split from rest of the fields inside cpuidle_state, which would be made global i.e. single copy. The driver_data field is also per-cpu and moved. Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Trinabh Gupta <g.trinabh@gmail.com> Tested-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-06cpuidle: Move dev->last_residency update to driver enter routine; remove ↵Deepthi Dharwar
dev->last_state Cpuidle governor only suggests the state to enter using the governor->select() interface, but allows the low level driver to override the recommended state. The actual entered state may be different because of software or hardware demotion. Software demotion is done by the back-end cpuidle driver and can be accounted correctly. Current cpuidle code uses last_state field to capture the actual state entered and based on that updates the statistics for the state entered. Ideally the driver enter routine should update the counters, and it should return the state actually entered rather than the time spent there. The generic cpuidle code should simply handle where the counters live in the sysfs namespace, not updating the counters. Reference: https://lkml.org/lkml/2011/3/25/52 Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Trinabh Gupta <g.trinabh@gmail.com> Tested-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-04ARM: OMAP2: Fix H4 matrix keyboard warningTony Lindgren
Convert to use matrix keyboard to remove the warning "Please update the board to use matrix-keypad driver". Based on similar setup in palmtc.c. Note that this patch is compile tested only because of lack of working hardware. Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04ARM: OMAP2+: timer: Remove omap_device_pm_latencyBenoit Cousson
Remove the structure since a default one is now available. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04ARM: OMAP2+: clock data: Remove redundant timer clkdevBenoit Cousson
The commit 318c3e15cd55c73a26ae22a65a8183655b3003f9 added some "fck" clock alias to timer devices that are not needed anymore since hwmod framework will create them automatically. A warning was added to highlight and thus fix the redundancy. [ 0.616424] omap_timer.1: alias fck already exists [ 0.621948] omap_timer.2: alias fck already exists [ 0.627380] omap_timer.3: alias fck already exists [ 0.632781] omap_timer.4: alias fck already exists [ 0.638214] omap_timer.5: alias fck already exists [ 0.643615] omap_timer.6: alias fck already exists [ 0.649078] omap_timer.7: alias fck already exists [ 0.654479] omap_timer.8: alias fck already exists [ 0.659881] omap_timer.9: alias fck already exists [ 0.665283] omap_timer.10: alias fck already exists [ 0.670776] omap_timer.11: alias fck already exists Remove all the clkdev entries for timer fck alias. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Tarun Kanti DebBarma <tarun.kanti@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04ARM: OMAP: Devkit8000: Remove double omap_mux_init_gpioThomas Weber
Remove the init of card detect pin because omap_mux_init_gpio() is called during hsmmc initialization for the write protect and card detect pin. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04ARM: OMAP: usb: musb: OMAP: Delete unused functionBjarne Steinsbo
Not in use anymore. Signed-off-by: Bjarne Steinsbo <bsteinsbo@gmail.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04ARM: OMAP: change get_context_loss_count ret value to intTomi Valkeinen
get_context_loss_count functions return context loss count as u32, and zero means an error. However, zero is also returned when context has never been lost and could also be returned when the context loss count has wrapped and goes to zero. Change the functions to return an int, with negative value meaning an error. OMAP HSMMC code uses omap_pm_get_dev_context_loss_count(), but as the hsmmc code handles the returned value as an int, with negative value meaning an error, this patch actually fixes hsmmc code also. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Kevin Hilman <khilman@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> [tony@atomide.com: updated to fix a warning with recent dmtimer changes] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04ARM: OMAP4: hsmmc: configure SDMMC1_DR0 properlyBalaji T K
Fix the typo, instead it should be SDMMC1 USBC1 is not related to MMC1 I/Os Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-04ARM: OMAP4: hsmmc: Fix Pbias configuration on regulator OFFBalaji T K
MMC1 data line IO's are powered down in before set regulator function. IO's should not be powered ON when regulator is OFF. Keep the IO's in power pown mode after regulator OFF otherwise VMODE_ERROR interrupt is generated due to mismatch in input (regulator) voltage and MMC IO drive voltage. Delete incorrect comments which are not applicable for OMAP4. Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Reported-by: Viswanath Puttagunta <vishp@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-02-14 00:00:03 +0000