summaryrefslogtreecommitdiff
path: root/arch/arm/mach-shmobile
AgeCommit message (Collapse)Author
2012-06-23ARM: shmobile: r8a7779: Route all interrupts to ARMPhil Edworthy
Without this, the interrupts for I2C, VIN, GPIO, SDHC, HSCIF and HPB-DMAC are sent to the SH processor. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-21ARM: shmobile: kzm9d: use late init machine hookKuninori Morimoto
Since commit 21cc1b7ede3cf456cf1d51f8a906093261f7c111 ("ARM: shmobile: use machine specific hook for late init") suspend and CPU idle are not initialized automatically anymore. Set shmobile_init_late() as the machine late init hook to initialize them. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-21ARM: shmobile: kzm9g: use late init machine hookKuninori Morimoto
Since commit 21cc1b7ede3cf456cf1d51f8a906093261f7c111 ("ARM: shmobile: use machine specific hook for late init") suspend and CPU idle are not initialized automatically anymore. Set shmobile_init_late() as the machine late init hook to initialize them. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-21ARM: mach-shmobile: armadillo800eva: Use late init machine hookLaurent Pinchart
Since commit 21cc1b7ede3cf456cf1d51f8a906093261f7c111 ("ARM: shmobile: use machine specific hook for late init") suspend and CPU idle are not initialized automatically anymore. Set shmobile_init_late() as the machine late init hook to initialize them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-20ARM: mach-shmobile: add missing GPIO IRQ configuration on mackerelGuennadi Liakhovetski
SDHI0 card-detect GPIO IRQ on mackarel currently works, because it is the default configuration of IRQ26. However, we should not rely on this and should configure the function explicitly. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-20ARM: mach-shmobile: Fix build when SMP is enabled and EMEV2 is not enabledNobuhiro Iwamatsu
Build failed, when SMP is enabled and EMEV2 is not enabled. arch/arm/mach-shmobile/built-in.o: In function `shmobile_platform_cpu_kill': /home/iwamatsu/work/kernel/sh-2.6-devel/arch/arm/mach-shmobile/platsmp.c:62: undefined reference to `emev2_platform_cpu_kill' arch/arm/mach-shmobile/built-in.o: In function `shmobile_smp_get_core_count': /home/iwamatsu/work/kernel/sh-2.6-devel/arch/arm/mach-shmobile/platsmp.c:39: undefined reference to `emev2_get_core_count' arch/arm/mach-shmobile/built-in.o: In function `shmobile_smp_prepare_cpus': /home/iwamatsu/work/kernel/sh-2.6-devel/arch/arm/mach-shmobile/platsmp.c:53: undefined reference to `emev2_smp_prepare_cpus' arch/arm/mach-shmobile/built-in.o: In function `platform_secondary_init': /home/iwamatsu/work/kernel/sh-2.6-devel/arch/arm/mach-shmobile/platsmp.c:78: undefined reference to `emev2_secondary_init' arch/arm/mach-shmobile/built-in.o: In function `boot_secondary': /home/iwamatsu/work/kernel/sh-2.6-devel/arch/arm/mach-shmobile/platsmp.c:90: undefined reference to `emev2_boot_secondary This is the cause by when EMEV2 is disabled, that the check by OF of EMEV2 is performed in platsmp.c. This patch revise what the function about EMEV2 may not be used in this file, when EMEV2 is not enabled. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Acked-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-20ARM: shmobile: sh7372: bugfix: chclr_offset baseKuninori Morimoto
chclr_write() will use (chan_reg + chclr_offset). In sh7372 case, DMA1CHCLR is started from 0xfe008220, and chan_reg is started from 0xfe008020 (= sh7372_dmae0_resources). Thus, chclr_offset should be (0x220 - 0x20) instead of 0x220. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-20ARM: shmobile: sh73a0: bugfix: SY-DMAC numberKuninori Morimoto
681e1b3eeb3606e06a7c4984e8058df84296f8bb (ARM: mach-shmobile: sh73a0 DMA Engine support for SY-DMAC) adds SY-DMAC, but it is 218, not 318 This patch is based on v2.0 manual Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-04Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "The clocksource driver is pure hardware enablement and the skew option is default off, well tested and non dangerous." * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick: Move skew_tick option into the HIGH_RES_TIMER section clocksource: em_sti: Add DT support clocksource: em_sti: Emma Mobile STI driver clockevents: Make clockevents_config() a global symbol tick: Add tick skew boot option
2012-05-26Merge tag 'cleanup-initcall' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull sweeping late_initcall cleanup for arm-soc from Olof Johansson: "This is a patch series from Shawn Guo that moves from individual late_initcalls() to using a member in the machine structure to invoke a platform's late initcalls. This cleanup is a step in the move towards multiplatform kernels since it would reduce the need to check for compatible platforms in each and every initcall." Fix up trivial conflicts in arch/arm/mach-{exynos/mach-universal_c210.c, imx/mach-cpuimx51.c, omap2/board-generic.c} due to changes nearby (and, in the case of cpuimx51.c the board support being deleted) * tag 'cleanup-initcall' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: ux500: use machine specific hook for late init ARM: tegra: use machine specific hook for late init ARM: shmobile: use machine specific hook for late init ARM: sa1100: use machine specific hook for late init ARM: s3c64xx: use machine specific hook for late init ARM: prima2: use machine specific hook for late init ARM: pnx4008: use machine specific hook for late init ARM: omap2: use machine specific hook for late init ARM: omap1: use machine specific hook for late init ARM: msm: use machine specific hook for late init ARM: imx: use machine specific hook for late init ARM: exynos: use machine specific hook for late init ARM: ep93xx: use machine specific hook for late init ARM: davinci: use machine specific hook for late init ARM: provide a late_initcall hook for platform initialization
2012-05-25clocksource: em_sti: Emma Mobile STI driverMagnus Damm
The STI hardware is based on a single 48-bit 32kHz counter that together with two individual compare registers can generate interrupts. There are no timer operating modes selectable which means that the timer can not clear on match. This driver is providing clocksource support for the 48-bit counter. Clockevents are also supported using the same timer in oneshot mode. Signed-off-by: Magnus Damm <damm@opensource.se> Cc: horms@verge.net.au Cc: arnd@arndb.de Cc: johnstul@us.ibm.com Cc: rjw@sisk.pl Cc: lethal@linux-sh.org Cc: gregkh@linuxfoundation.org Cc: olof@lixom.net Link: http://lkml.kernel.org/r/20120525070344.23443.69756.sendpatchset@w520 Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-05-23Merge tag 'sound-3.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This is the first big chunk for 3.5 merges of sound stuff. There are a few big changes in different areas. First off, the streaming logic of USB-audio endpoints has been largely rewritten for the better support of "implicit feedback". If anything about USB got broken, this change has to be checked. For HD-audio, the resume procedure was changed; instead of delaying the resume of the hardware until the first use, now waking up immediately at resume. This is for buggy BIOS. For ASoC, dynamic PCM support and the improved support for digital links between off-SoC devices are major framework changes. Some highlights are below: * HD-audio - Avoid accesses of invalid pin-control bits that may stall the codec - V-ref setup cleanups - Fix the races in power-saving code - Fix the races in codec cache hashes and connection lists - Split some common codes for BIOS auto-parser to hda_auto_parser.c - Changed the PM resume code to wake up immediately for buggy BIOS - Creative SoundCore3D support - Add Conexant CX20751/2/3/4 codec support * ASoC - Dynamic PCM support, allowing support for SoCs with internal routing through components with tight sequencing and formatting constraints within their internal paths or where there are multiple components connected with CPU managed DMA controllers inside the SoC. - Greatly improved support for direct digital links between off-SoC devices, providing a much simpler way of connecting things like digital basebands to CODECs. - Much more fine grained and robust locking, cleaning up some of the confusion that crept in with multi-component. - CPU support for nVidia Tegra 30 I2S and audio hub controllers and ST-Ericsson MSP I2S controolers - New CODEC drivers for Cirrus CS42L52, LAPIS Semiconductor ML26124, Texas Instruments LM49453. - Some regmap changes needed by the Tegra I2S driver. - mc13783 audio support. * Misc - Rewrite with module_pci_driver() - Xonar DGX support for snd-oxygen - Improvement of packet handling in snd-firewire driver - New USB-endpoint streaming logic - Enhanced M-audio FTU quirks and relevant cleanups - Increment the support of OSS devices to 256 - snd-aloop accuracy improvement There are a few more pending changes for 3.5, but they will be sent slightly later as partly depending on the changes of DRM." Fix up conflicts in regmap (due to duplicate patches, with some further updates then having already come in from the regmap tree). Also some fairly trivial context conflicts in the imx and mcx soc drivers. * tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (280 commits) ALSA: snd-usb: fix stream info output in /proc ALSA: pcm - Add proper state checks to snd_pcm_drain() ALSA: sh: Fix up namespace collision in sh_dac_audio. ALSA: hda/realtek - Fix unused variable compile warning ASoC: sh: fsi: enable chip specific data transfer mode ASoC: sh: fsi: call fsi_hw_startup/shutdown from fsi_dai_trigger() ASoC: sh: fsi: use same format for IN/OUT ASoC: sh: fsi: add fsi_version() and removed meaningless version check ASoC: sh: fsi: use register field macro name on IN/OUT_DMAC ASoC: tegra: Add machine driver for WM8753 codec ALSA: hda - Fix possible races of accesses to connection list array ASoC: OMAP: HDMI: Introduce codec ARM: mx31_3ds: Add sound support ASoC: imx-mc13783 cleanup mx31moboard: Add sound support ASoC: mc13783 codec cleanups ASoC: add imx-mc13783 sound support ASoC: Add mc13783 codec mfd: mc13xxx: add codec platform data ASoC: don't flip master of DT-instantiated DAI links ...
2012-05-22Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc board specific changes from Olof Johansson: "While we generally attempt to get rid of board specific files and replace them with device tree based descriptions, a lot of platforms have not come that far: In shmobile, we add two new board files because their recently started effort to add DT support has not proceeded enough to use it for all of the important hardware. In Kirkwood, we are adding support for new boards with a combination of DT and board file contents in multiple cases. pxa/mmp and imx are extending support for existing board files but not adding new ones." Fix up trivial conflicts in arch/arm/mach-{mmp/ttc_dkb.c,shmobile/{Kconfig,Makefile}} * tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (94 commits) ARM: shmobile: fix smp build ARM: kirkwood: Add support for RaidSonic IB-NAS6210/6220 using devicetree kirkwood: Add iconnect support orion/kirkwood: create a generic function for gpio led blinking kirkwood/orion: fix orion_gpio_set_blink ARM: kirkwood: Define DNS-320/DNS-325 NAND in fdt kirkwood: Allow nand to be configured via. devicetree mtd: Add orion_nand devicetree bindings ARM: kirkwood: Basic support for DNS-320 and DNS-325 ARM: mach-shmobile: Use DT_MACHINE for armadillo 800 eva ARM: mach-shmobile: Use DT_MACHINE for KZM9G ARM: pxa: hx4700: Add Synaptics NavPoint touchpad ARM: pxa: Use REGULATOR_SUPPLY macro ARM: mach-shmobile: kzm9g: enable SMP boot ARM: mach-shmobile: kzm9g: defconfig update ARM: mach-shmobile: kzm9g: add PCF8757 gpio-key ARM: mach-shmobile: kzm9g: add SDHI support ARM: mach-shmobile: kzm9g: add MMCIF support ARM: mach-shmobile: kzm9g: correct screen direction ARM: mach-shmobile: sh73a0.h: add GPIO_NR ...
2012-05-18mach-shmobile: Use DT_MACHINE for KZM9D V3Magnus Damm
Use DT_MACHINE_START() on the emev2 based KZM9D board. Also include a tiny DTS file to describe the board and update the Kconfig dependencies to select CONFIG_USE_OF. Update the SMP glue code to use OF for matching. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-18mach-shmobile: Emma Mobile EV2 DT support V3Magnus Damm
This is EMEV2 DT support V3. The support is limited to whatever devices that are complied in the kernel. At this point we have UARTs handled by "em-uart" and a timer handled by "em-sti". Clocks and SMP are not supported. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-18mach-shmobile: KZM9D board Ethernet support V3Magnus Damm
Tie in the on-board Ethernet controller on KZM9D and make use of the GPIO controller for external IRQ pin support. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-18mach-shmobile: Emma Mobile EV2 GPIO support V3Magnus Damm
Tie in the Emma Mobile GPIO driver "em-gio" to support the GPIOs on Emma Mobile EV2. A static IRQ range is used to allow boards to hook up their platform devices to the GPIOs. DT support is still on the TODO for the GPIO driver, so only platform device support is included here. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-18mach-shmobile: Emma Mobile EV2 SMP support V3Magnus Damm
This is V3 of Emma Mobile EV2 SMP support. At this point only the most basic form of SMP operation is supported. TWD and CPU Hotplug support is excluded. Tied to both the Emma Mobile EV2 and the KZM9D board due to the need to switch on board in platsmp.c and the newly introduced need for static mappings. The static mappings are needed to allow hardware acces early during boot when SMP is initialized. This early requirement forces us to also map in the SMU registers. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-18mach-shmobile: KZM9D board support V3Magnus Damm
V3 of basic KZM9D board support. At this point a quite thin layer that makes use of the Emma Mobile EV2 SoC code. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-18mach-shmobile: Emma Mobile EV2 SoC base support V3Magnus Damm
This is V3 of the Emma Mobile EV2 SoC support. Included here is support for serial and timer devices which is just about enough to boot a kernel. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-17ARM: mach-shmobile: sh73a0: fixup PINT/IRQ16-IRQ31 irq number conflictKuninori Morimoto
Current IRQ16-IRQ31 irq number are located around 800 from 1ee8299a9ec1ce5137a044c7768293007b9a3267 (ARM: mach-shmobile: Use 0x3400 as INTCS vector offset) But, the PINT0/1 IRQ number are also located around 800 from 0df1a838d678fc6ab49f983a19e905f6a42297a0 (ARM: mach-shmobile: sh73a0 PINT IRQ base fix) This patch relocates PINT0/1 IRQ number to around 700 where is not used, and adds current IRQ location table in comment area. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-16Merge branch 'renesas/board2' into next/boardsArnd Bergmann
* renesas/board2: ARM: shmobile: fix smp build Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-16ARM: shmobile: fix smp buildArnd Bergmann
I got build errors with the new version now because machine_is_kzm9g is no longer defined: arch/arm/mach-shmobile/platsmp.c: In function 'shmobile_smp_get_core_count': arch/arm/mach-shmobile/platsmp.c:29:2: error: implicit declaration of function 'of_machine_is_compatible' Replace the missing function with a call to of_machine_is_compatible. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Acked-by: Magnus Damm <magnus.damm@gmail.com>
2012-05-15Merge branch 'board-new' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas into next/boards "Rafael J. Wysocki" <rjw@sisk.pl> writes: Renesas ARM-based platforms: new boards support for v3.5 * Support for the KZM-A9-GT board from Kuninori Morimoto and Magnus Damm. * Support for the armadillo800eva board from Kuninori Morimoto and Magnus Damm. This is based on the Renesas core SoC code updates I've sent a separate pull request for. * 'board-new' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas: (29 commits) ARM: mach-shmobile: Use DT_MACHINE for armadillo 800 eva ARM: mach-shmobile: Use DT_MACHINE for KZM9G ARM: mach-shmobile: kzm9g: enable SMP boot ARM: mach-shmobile: kzm9g: defconfig update ARM: mach-shmobile: kzm9g: add PCF8757 gpio-key ARM: mach-shmobile: kzm9g: add SDHI support ARM: mach-shmobile: kzm9g: add MMCIF support ARM: mach-shmobile: kzm9g: correct screen direction ARM: mach-shmobile: sh73a0.h: add GPIO_NR ARM: mach-shmobile: pfc-sh73a0: fixup MSEL2CR MSEL18 for I2C-3 ARM: mach-shmobile: kzm9g: add ST1232 Touchscreen support ARM: mach-shmobile: kzm9g: add LCDC support ARM: mach-shmobile: kzm9g: add external USB Host support ARM: mach-shmobile: kzm9g: add SMSC 9221 support ARM: mach-shmobile: kzm9g: add defconfig ARM: mach-shmobile: add KZM-A9-GT board support ARM: mach-shmobile: armadillo800eva: defconfig update ARM: mach-shmobile: clock-r8a7740: add sh-eth clock ARM: mach-shmobile: r8a7740: reserve DMA memory for the frame buffer ARM: mach-shmobile: armadillo800eva: add MMCIF support ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-14Merge branch 'renesas-kzm9g' into renesas-board-newRafael J. Wysocki
* renesas-kzm9g: ARM: mach-shmobile: Use DT_MACHINE for KZM9G
2012-05-14Merge branch 'renesas-armadillo800eva' into renesas-board-newRafael J. Wysocki
* renesas-armadillo800eva: ARM: mach-shmobile: Use DT_MACHINE for armadillo 800 eva
2012-05-14ARM: mach-shmobile: Use DT_MACHINE for armadillo 800 evaMagnus Damm
Use DT_MACHINE_START() on the r8a7740 based armadillo 800 eva board. Also include a tiny DTS file to describe the board and update the Kconfig dependencies to select CONFIG_USE_OF. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-14ARM: mach-shmobile: Use DT_MACHINE for KZM9GMagnus Damm
Use DT_MACHINE_START() on the sh73a0 based KZM9G board. Also include a tiny DTS file to describe the board and update the Kconfig dependencies to select CONFIG_USE_OF. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-13Merge tag 'v3.4-rc7' into for-3.5Mark Brown
Linux 3.4-rc7 Conflicts): drivers/base/regmap/regmap.c (overlap with bug fixes) sound/soc/blackfin/bf5xx-ssm2602.c (overlap with bug fixes)
2012-05-12Merge branch 'renesas-kzm9g' into renesas-board-newRafael J. Wysocki
* renesas-kzm9g: ARM: mach-shmobile: kzm9g: enable SMP boot ARM: mach-shmobile: kzm9g: defconfig update ARM: mach-shmobile: kzm9g: add PCF8757 gpio-key ARM: mach-shmobile: kzm9g: add SDHI support ARM: mach-shmobile: kzm9g: add MMCIF support ARM: mach-shmobile: kzm9g: correct screen direction ARM: mach-shmobile: sh73a0.h: add GPIO_NR ARM: mach-shmobile: pfc-sh73a0: fixup MSEL2CR MSEL18 for I2C-3 ARM: mach-shmobile: kzm9g: add ST1232 Touchscreen support ARM: mach-shmobile: kzm9g: add LCDC support ARM: mach-shmobile: kzm9g: add external USB Host support ARM: mach-shmobile: kzm9g: add SMSC 9221 support ARM: mach-shmobile: kzm9g: add defconfig ARM: mach-shmobile: add KZM-A9-GT board support Conflicts: arch/arm/mach-shmobile/Makefile
2012-05-12ARM: mach-shmobile: kzm9g: enable SMP bootKuninori Morimoto
Update the KZM9G defconfig and the code in platsmp.c to support SMP on the sh73a0 based KZM9G board. Also fix up the earlyprintk setting that was previously incorrect. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: kzm9g: add PCF8757 gpio-keyKuninori Morimoto
This patch adds extra GPIO via PCF8757 chip, and use it as gpio-key. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: kzm9g: add SDHI supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: kzm9g: add MMCIF supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: kzm9g: correct screen directionKuninori Morimoto
The correct screen direction of KZM9G board needs PORT226/SC settings. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: sh73a0.h: add GPIO_NRKuninori Morimoto
GPIO_NR is added in order to clarify end of GPIO array. We can add extra GPIO from it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: pfc-sh73a0: fixup MSEL2CR MSEL18 for I2C-3Kuninori Morimoto
MSEL2CR MSEL18 should be 1 if I2C-3 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: kzm9g: add ST1232 Touchscreen supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: kzm9g: add LCDC supportKuninori Morimoto
AS3711 chip initalization is required for enabling LCDC backlight, but there is no driver for this chip. So, this patch sends its settings when boot. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: kzm9g: add external USB Host supportKuninori Morimoto
This patch uses r8a66597_hcd driver, since renesas_usbhs driver doesn't support external R8A66597 chip. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: kzm9g: add SMSC 9221 supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: add KZM-A9-GT board supportKuninori Morimoto
This adds very basic KZM-A9-GT board (SH73a0) support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: clock-r8a7740: add sh-eth clockKuninori Morimoto
armadillo800eva board is using sh-eth, but clock-r8a7740 didn't care it. This clock was enabled by boot-loader. This patch fix it up. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: r8a7740: reserve DMA memory for the frame bufferKuninori Morimoto
The default 2MB size of DMA coherent memory isn't enough for allocate frame buffer memory. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: armadillo800eva: add MMCIF supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: armadillo800eva: add SDHI1 supportKuninori Morimoto
We can switch CON8/CON14 by SW1.5 SDHI1 is CON8 (SW1.5 = ON) Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: armadillo800eva: add SDHI0 supportKuninori Morimoto
On armadillo800eva board, CD (= Card Detect) pin is not connected to SDHI0_CD. Then, we can use IRQ31 as card detect irq, but it needs chattering removal operation. We should use IRQ card detect in the future, but this patch use polling mode at this point. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: armadillo800eva: add USB function supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: armadillo800eva: add support ST1232Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12ARM: mach-shmobile: armadillo800eva: add support sh_ethKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>