summaryrefslogtreecommitdiff
path: root/arch/arm/mach-shmobile
AgeCommit message (Collapse)Author
2012-10-01Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM soc-specific updates from Olof Johansson: "Most notable here is probably the addition of basic support for the BCM2835, an SoC used in some of the Roku 2 players as well as the much-hyped Raspberry Pi, cleaned up and contributed by Stephen Warren. It's still early days on mainline support, with just the basics working. But it has to start somewhere! Beyond that there's some conversions of clock infrastructure on tegra to common clock, misc updates for several other platforms, and OMAP now has its own bus (under drivers/bus) to manage its devices through. This branch adds two new directories outside of arch/arm: drivers/irqchip for new irq controllers, and drivers/bus for the above OMAP bus. It's expected that some of the other platforms will migrate parts of their platforms to those directories over time as well." Fix up trivial conflicts with the clk infrastructure changes. * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (62 commits) ARM: shmobile: add new __iomem annotation for new code ARM: LPC32xx: Support GPI 28 ARM: LPC32xx: Platform update for devicetree completion of spi-pl022 ARM: LPC32xx: Board cleanup irqchip: fill in empty Kconfig ARM: SAMSUNG: Add check for NULL in clock interface ARM: EXYNOS: Put PCM, Slimbus, Spdif clocks to off state ARM: EXYNOS: Add bus clock for FIMD ARM: SAMSUNG: Fix HDMI related warnings ARM: S3C24XX: Add .get_rate callback for "camif-upll" clock ARM: EXYNOS: Fix incorrect help text ARM: EXYNOS: Turn off clocks for NAND, OneNAND and TSI controllers ARM: OMAP: AM33xx hwmod: fixup SPI after platform_data move MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture ARM: bcm2835: instantiate console UART ARM: bcm2835: add stub clock driver ARM: bcm2835: add system timer ARM: bcm2835: add interrupt controller driver ARM: add infra-structure for BCM2835 and Raspberry Pi ARM: tegra20: add CPU hotplug support ...
2012-10-01Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM soc general cleanups from Olof Johansson: "This is a large branch that contains a handful of different cleanups: - Fixing up the I/O space remapping on PCI on ARM. This is a series from Rob Herring that restructures how all pci devices allocate I/O space, and it's part of the work to allow multiplatform kernels. - A number of cleanup series for OMAP, moving and removing some headers, sparse irq rework and in general preparation for multiplatform. - Final removal of all non-DT boards for Tegra, it is now device-tree-only! - Removal of a stale platform, nxp4008. It's an old mobile chipset that is no longer in use, and was very likely never really used with a mainline kernel. We have not been able to find anyone interested in keeping it around in the kernel. - Removal of the legacy dmaengine driver on tegra + A handful of other things that I haven't described above." Fix up some conflicts with the staging tree (and because nxp4008 was removed) * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (184 commits) ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6 ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus ARM: mmp: using for_each_set_bit to simplify the code ARM: tegra: harmony: fix ldo7 regulator-name ARM: OMAP2+: Make omap4-keypad.h local ARM: OMAP2+: Make l4_3xxx.h local ARM: OMAP2+: Make l4_2xxx.h local ARM: OMAP2+: Make l3_3xxx.h local ARM: OMAP2+: Make l3_2xxx.h local ARM: OMAP1: Move irda.h from plat to mach ARM: OMAP2+: Make hdq1w.h local ARM: OMAP2+: Make gpmc-smsc911x.h local ARM: OMAP2+: Make gpmc-smc91x.h local ARM: OMAP1: Move flash.h from plat to mach ARM: OMAP2+: Make debug-devices.h local ARM: OMAP1: Move board-voiceblue.h from plat to mach ARM: OMAP1: Move board-sx1.h from plat to mach ARM: OMAP2+: Make omap-wakeupgen.h local ARM: OMAP2+: Make omap-secure.h local ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local ...
2012-09-28ARM: shmobile: add new __iomem annotation for new codeArnd Bergmann
While we fixed up all instances that were already present in v3.6, this one came in through new code. Without this patch, building kzm9g_defconfig results in: arch/arm/mach-shmobile/board-kzm9g.c: In function 'kzm9g_restart': arch/arm/mach-shmobile/board-kzm9g.c:781:2: warning: passing argument 2 of '__raw_writel' makes pointer from integer without a cast [enabled by default] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Tetsuyuki Kobayashi <koba@kmckk.co.jp> Cc: Simon Horman <horms@verge.net.au>
2012-09-22Merge branch 'cleanup/__iomem' into next/cleanupOlof Johansson
__iomem annotation cleanup branch from Arnd. * cleanup/__iomem: (21 commits) net: seeq: use __iomem pointers for MMIO video: da8xx-fb: use __iomem pointers for MMIO scsi: eesox: use __iomem pointers for MMIO serial: ks8695: use __iomem pointers for MMIO input: rpcmouse: use __iomem pointers for MMIO ARM: samsung: use __iomem pointers for MMIO ARM: spear13xx: use __iomem pointers for MMIO ARM: sa1100: use __iomem pointers for MMIO ARM: prima2: use __iomem pointers for MMIO ARM: nomadik: use __iomem pointers for MMIO ARM: msm: use __iomem pointers for MMIO ARM: lpc32xx: use __iomem pointers for MMIO ARM: ks8695: use __iomem pointers for MMIO ARM: ixp4xx: use __iomem pointers for MMIO ARM: iop32x: use __iomem pointers for MMIO ARM: iop13xx: use __iomem pointers for MMIO ARM: integrator: use __iomem pointers for MMIO ARM: imx: use __iomem pointers for MMIO ARM: ebsa110: use __iomem pointers for MMIO ARM: at91: use __iomem pointers for MMIO ... Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-18Merge branch 'fixes' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: kzm9g: bugfix: correct mmcif interrupt settings
2012-09-18ARM: shmobile: use __iomem pointers for MMIOArnd Bergmann
ARM is moving to stricter checks on readl/write functions, so we need to use the correct types everywhere. This patch is a bit ugly for shmobile, which is the only platform that just uses integer literals all over the place, but I can't see a better way to do this. Acked-by: Simon Horman <horms@verge.net.au> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: linux-sh@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-18ARM: shmobile: kzm9g: bugfix: correct mmcif interrupt settingsTetsuyuki Kobayashi
Correct interrupt settings of sh_mmc:int and sh_mmc:error in board-kzm9g.c. Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-09-16Merge tag 'cleanup-omap-tags-for-v3.7' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup From Tony Lindgren: Remove the ancient omap specific atags that are no longer needed. At some point we were planning to pass the bootloader information with custom atags that did not work out too well. There's no need for these any longer as the kernel has been booting fine without them for quite some time. And Now we have device tree support that can be used instead. * tag 'cleanup-omap-tags-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP: remove plat/board.h file ARM: OMAP: move debug_card_init() function ARM: OMAP1: move lcd pdata out of arch/arm/* ARM: OMAP1: move omap1_bl pdata out of arch/arm/* ARM: OMAP: remove the omap custom tags ARM: OMAP1: remove the crystal type tag parsing ARM: OMAP: remove the sti console workaround ARM: OMAP: omap3evm: cleanup revision bits ARM: OMAP: cleanup struct omap_board_config_kernel + sync to 3.6-rc5
2012-09-16Merge tag 'devel-omap-device-for-v3.7' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc Kevin Hilman <khilman@ti.com>: Updates for omap_device layer for v3.7. Allows omap_device layer to keep track of driver bound status in order to make more intelligent decisions about idling unused devices. * tag 'devel-omap-device-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP: omap_device: idle devices with no driver bound ARM: OMAP: omap_device: don't attempt late suspend if no driver bound ARM: OMAP: omap_device: keep track of driver bound status + sync to 3.6-rc5
2012-09-11Merge branch 'renesas/pmu' into next/socOlof Johansson
* renesas/pmu: ARM: shmobile: emev2: enable PMU(Performance Monitoring Unit) ARM: shmobile: sh73a0: enable PMU(Performance Monitoring Unit)
2012-09-11ARM: shmobile: emev2: enable PMU(Performance Monitoring Unit)Tetsuyuki Kobayashi
This patch enables PMU(Performance Monitoring Unit) for emev2. Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-09-11ARM: shmobile: sh73a0: enable PMU(Performance Monitoring Unit)Tetsuyuki Kobayashi
This patch enables PMU(Performance Monitoring Unit) for sh73a0. Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-09-06r8a7779: add SDHI clock supportPhil Edworthy
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-09-04Merge branch 'fixes' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Two regression fixes and one boot-loader compatibility fix from Simon Horman. * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: armadillo800eva: enable rw rootfs mount ARM: shmobile: mackerel: fixup usb module order ARM: shmobile: armadillo800eva: fixup: sound card detection order
2012-09-02Merge branch 'fixes' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: marzen: fixup smsc911x id for regulator
2012-08-31ARM: shmobile: mackerel: fixup usb module orderKuninori Morimoto
renesas_usbhs driver can play role as both Host and Gadget. In case of Gadget, it requires not only renesas_usbhs but also usb gadget module (like g_ether). So, renesas_usbhs driver calls usb_add_gadget_udc() on probe time. Because of this behavior, Host port plays also Gadget role if kernel has both Host/Gadget support. In mackerel case, from 0ada2da51800a4914887a9bcf22d563be80e50be (ARM: mach-shmobile: mackerel: use renesas_usbhs instead of r8a66597_hcd) usb0 plays Gadget role, and usb1 plays Host role, and current mackerel board probes as usb1 -> usb0. Thus, 1st installed usb gadget module (like g_ether) will be assigned to usb1 (= usb Host port), and 2nd module to usb0 (= usb Gadget port). It is very confusable for user. This patch fixup usb modes probing order as usb0 -> usb1. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-08-31ARM: shmobile: armadillo800eva: fixup: sound card detection orderKuninori Morimoto
Since armadillo800eva has 2 sound cards, and had reversed deferred probe order issue, it was purposely registered in reverse order. But it was solved by 1d29cfa57471a5e4b8a7c2a7433eeba170d3ad92 (driver core: fixup reversed deferred probe order) armadillo800eva board is expecting that FSI-WM8978 is the 1st, and FSI-HDMI is the 2nd sound card. This patch fixes it up Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-08-31ARM: mach-shmobile: remove duplicated include from board-ag5evm.cWei Yongjun
From: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-08-30ARM: shmobile: marzen: fixup smsc911x id for regulatorKuninori Morimoto
dummy_supplies for smsc911x are registered as "smsc911x". smsc911x driver needs id = -1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-08-27Merge branch 'armadillo800eva' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes * 'armadillo800eva' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: mach-shmobile: armadillo800eva: Enable power button as wakeup source ARM: mach-shmobile: armadillo800eva: Fix GPIO buttons descriptions
2012-08-25ARM: mach-shmobile: armadillo800eva: Enable power button as wakeup sourceLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-08-25ARM: mach-shmobile: armadillo800eva: Fix GPIO buttons descriptionsLaurent Pinchart
The GPIO buttons are named SW3, SW4, SW5 and SW6 on the board silkscreen. Update the buttons descriptions accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-08-25ARM: shmobile: kzm9g: enable restartingTetsuyuki Kobayashi
Do soft-power-on-reset in sys_reboot system call. How to test this patch Execute "sudo reboot" from command line. The system will start shutdown sequence and finally reboot and U-Boot restarts. Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-08-22ARM: shmobile: sh73a0: fixup RELOC_BASE of intca_irq_pins_descKuninori Morimoto
sh73a0 :: intca_irq_pins_desc irq table had conflict from irq 552 to irq 557 before. But the second controller was simply trampling the first one by way of the -EEXIST case from irq_alloc_desc_at(). But now, we have irqdomain support from 1d6a21b0a672fb29b01ccf397d478e0541e17716 (sh: intc: initial irqdomain support) The irqdomain code has simply tightened down the sanity checks and error path. So, sh73a0 CPU board got some WARNING when booting now. This patch fixup RELOC_BASE to solve this issue. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-30Merge tag 'boards2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc board updates from Olof Johansson: "This branch contains board updates, mostly for shmobile, but also a couple for PXA. The shmobile platforms are still in the early stages of DT enablement, so there's a bit more updates here than we'd ideally want to see: - regulator updates to provide some fixed regulators on several boards - gpio support updates for multiple boards - misc updates for recently-introduced boards armadillo800eva and kzm9g - defconfig updates" * tag 'boards2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits) ARM: shmobile: kzm9g: defconfig enable INOTIFY_USER ARM: mach-shmobile: armadillo800eva: defconfig Allow use of armhf userspace ARM: shmobile: armadillo800eva: A3SP domain includes USB ARM: shmobile: armadillo800eva: A4LC domain includes LCDC ARM: shmobile: armadillo800eva: USB Func enables external IRQ mode ARM: mach-shmobile: kzm9d: Add defconfig ARM: mach-shmobile: select the fixed regulator driver on several boards ARM: mach-shmobile: add SDHI2 to the 2.8V fixed regulator consumers on kzm9g ARM: pxa: hx4700: Use DEFINE_RES_* macros consistently ARM: pxa: remove eseries.h ARM: mach-shmobile: add fixed voltage regulators to marzen ARM: mach-shmobile: add fixed voltage regulators to kzm9g ARM: mach-shmobile: add fixed voltage regulators to kzm9d ARM: mach-shmobile: add fixed voltage regulators to kota2 ARM: mach-shmobile: add fixed voltage regulators to g4evm ARM: mach-shmobile: add fixed voltage regulators to bonito ARM: mach-shmobile: add fixed voltage regulators to armadillo800eva ARM: mach-shmobile: add fixed voltage regulators to ap4evb ARM: mach-shmobile: add fixed voltage regulators to ag5evm ARM: mach-shmobile: add 3.3V and 1.8V fixed regulators to mackerel ...
2012-07-21Merge tag 'v3.5-rc7' into late/socArnd Bergmann
Linux 3.5-rc7
2012-07-11Merge branch 'renesas-marzen' into renesas-boardRafael J. Wysocki
* renesas-marzen: ARM: mach-shmobile: add fixed voltage regulators to marzen
2012-07-11Merge branch 'renesas-mackerel' into renesas-boardRafael J. Wysocki
* renesas-mackerel: ARM: mach-shmobile: add 3.3V and 1.8V fixed regulators to mackerel ARM: shmobile: use common extra gpio functions on Mackerel
2012-07-11Merge branch 'renesas-kzm9g' into renesas-boardRafael J. Wysocki
* renesas-kzm9g: ARM: shmobile: kzm9g: defconfig enable INOTIFY_USER ARM: mach-shmobile: add SDHI2 to the 2.8V fixed regulator consumers on kzm9g ARM: mach-shmobile: add fixed voltage regulators to kzm9g ARM: shmobile: kzm9g: enable DMAEngine on MMCIF ARM: shmobile: kzm9g: enable DMAEngine on FSI ARM: shmobile: kzm9g: enable MicroSD ARM: shmobile: kzm9g: enable USB function
2012-07-11Merge branch 'renesas-kzm9d' into renesas-boardRafael J. Wysocki
* renesas-kzm9d: ARM: mach-shmobile: kzm9d: Add defconfig ARM: mach-shmobile: add fixed voltage regulators to kzm9d
2012-07-11Merge branch 'renesas-kota2' into renesas-boardRafael J. Wysocki
* renesas-kota2: ARM: mach-shmobile: add fixed voltage regulators to kota2
2012-07-11Merge branch 'renesas-g4evm' into renesas-boardRafael J. Wysocki
* renesas-g4evm: ARM: mach-shmobile: add fixed voltage regulators to g4evm ARM: shmobile: use common extra gpio functions on g4evm
2012-07-11Merge branch 'renesas-bonito' into renesas-boardRafael J. Wysocki
* renesas-bonito: ARM: mach-shmobile: add fixed voltage regulators to bonito
2012-07-11Merge branch 'renesas-ap4evb' into renesas-boardRafael J. Wysocki
* renesas-ap4evb: ARM: mach-shmobile: add fixed voltage regulators to ap4evb ARM: shmobile: use common extra gpio functions on ap4evb
2012-07-11Merge branch 'renesas-ag5evm' into renesas-boardRafael J. Wysocki
* renesas-ag5evm: ARM: mach-shmobile: add fixed voltage regulators to ag5evm
2012-07-11Merge branch 'renesas-armadillo' into renesas-boardRafael J. Wysocki
* renesas-armadillo: ARM: mach-shmobile: armadillo800eva: defconfig Allow use of armhf userspace ARM: shmobile: armadillo800eva: A3SP domain includes USB ARM: shmobile: armadillo800eva: A4LC domain includes LCDC ARM: shmobile: armadillo800eva: USB Func enables external IRQ mode ARM: mach-shmobile: add fixed voltage regulators to armadillo800eva ARM: shmobile: use common extra gpio functions on armadillo800eva ARM: shmobile: armadillo800eva: enable DMAEngine on USB ARM: shmobile: armadillo800eva: enable DMAEngine on SDHI ARM: shmobile: armadillo800eva: enable DMAEngine on FSI ARM: shmobile: armadillo800eva: enable FSI-HDMI sound ARM: shmobile: armadillo800eva: enable FSI-WM8978 sound Conflicts: arch/arm/mach-shmobile/Kconfig
2012-07-11Merge branch 'renesas-board-common' into renesas-boardRafael J. Wysocki
* renesas-board-common: ARM: mach-shmobile: select the fixed regulator driver on several boards regulator: extend the fixed dummy voltage regulator to accept voltage regulator: support multiple dummy fixed regulators Conflicts: arch/arm/mach-shmobile/Kconfig
2012-07-11Merge branch 'renesas-soc' into renesas-boardRafael J. Wysocki
* renesas-soc: (31 commits) ARM: shmobile: Fix build problem in pm-sh7372.c for unusual .config ARM: shmobile: Take cpuidle dependencies into account correctly ARM: mach-shmobile: sh7377 generic board support via DT ARM: mach-shmobile: r8a7740 generic board support via DT ARM: shmobile: sh7372: completely switch over to using pm-rmobile API ARM: shmobile: ap4evb: switch to using pm-rmobile API ARM: shmobile: mackerel: switch to using pm-rmobile API ARM: shmobile: sh7372: add pm-rmobile domain support ARM: shmobile: r8a7740: add A4LC pm domain support ARM: shmobile: r8a7740: add A3SP pm domain support ARM: shmobile: r8a7740: add A4S pm domain support ARM: shmobile: r8a7740: fixup: MSEL1CR 7bit control ARM: shmobile: soc-core: add R-mobile PM domain common APIs ARM: shmobile: sh7372 A3SM CPUIdle support ARM: shmobile: Use INTCA with sh7372 A3SM power domain ARM: mach-shmobile: Convert sh_clk_mstp32_register to sh_clk_mstp_register ARM: shmobile: use common DMAEngine definitions on sh7372 ARM: shmobile: use common DMAEngine definitions on sh73a0 ARM: shmobile: sh73a0: add DMAEngine support for MPDMAC ARM: shmobile: sh73a0: add USB clock support ...
2012-07-11Merge branch 'renesas-sh7377' into renesas-socRafael J. Wysocki
* renesas-sh7377: ARM: mach-shmobile: sh7377 generic board support via DT
2012-07-11Merge branch 'renesas-sh7372' into renesas-socRafael J. Wysocki
* renesas-sh7372: ARM: shmobile: Fix build problem in pm-sh7372.c for unusual .config ARM: shmobile: Take cpuidle dependencies into account correctly ARM: shmobile: sh7372: completely switch over to using pm-rmobile API ARM: shmobile: ap4evb: switch to using pm-rmobile API ARM: shmobile: mackerel: switch to using pm-rmobile API ARM: shmobile: sh7372: add pm-rmobile domain support ARM: shmobile: sh7372 A3SM CPUIdle support ARM: shmobile: Use INTCA with sh7372 A3SM power domain ARM: shmobile: use common DMAEngine definitions on sh7372 ARM: shmobile: sh7372: remove unused sh7372_a3sp_init() on !CONFIG_PM
2012-07-11Merge branch 'renesas-sh73a0' into renesas-socRafael J. Wysocki
* renesas-sh73a0: ARM: shmobile: use common DMAEngine definitions on sh73a0 ARM: shmobile: sh73a0: add DMAEngine support for MPDMAC ARM: shmobile: sh73a0: add USB clock support
2012-07-11Merge branch 'renesas-r8a7740' into renesas-socRafael J. Wysocki
* renesas-r8a7740: ARM: mach-shmobile: r8a7740 generic board support via DT ARM: shmobile: r8a7740: add A4LC pm domain support ARM: shmobile: r8a7740: add A3SP pm domain support ARM: shmobile: r8a7740: add A4S pm domain support ARM: shmobile: r8a7740: fixup: MSEL1CR 7bit control ARM: shmobile: use common DMAEngine definitions on r8a7740 ARM: shmobile: r8a7740: add DMAEngine support for USB ARM: shmobile: r8a7740: add DMAEngine support for SDHI ARM: shmobile: r8a7740: add DMAEngine support for FSI
2012-07-11Merge branch 'renesas-soc-core' into renesas-socRafael J. Wysocki
* renesas-soc-core: ARM: shmobile: soc-core: add R-mobile PM domain common APIs ARM: mach-shmobile: Convert sh_clk_mstp32_register to sh_clk_mstp_register ARM: shmobile: add common DMAEngine definitions ARM: shmobile: add common extra gpio functions Conflicts: arch/arm/mach-shmobile/clock-r8a7740.c
2012-07-11Merge branch 'renesas-fixes' into renesas-socRafael J. Wysocki
* renesas-fixes: ARM: shmobile: r8a7779: Route all interrupts to ARM ARM: shmobile: kzm9d: use late init machine hook ARM: shmobile: kzm9g: use late init machine hook ARM: mach-shmobile: armadillo800eva: Use late init machine hook
2012-07-11ARM: shmobile: Fix build problem in pm-sh7372.c for unusual .configRafael J. Wysocki
If neither CONFIG_SUSPEND nor CONFIG_CPU_IDLE is set in the kernel configuration file, build error occurs in arch/arm/mach-shmobile/pm-sh7372.c. Fix it by rearranging #ifdefs in that file to make the definition of sh7372_suspend_init() depend only on CONFIG_SUSPEND and the definition of sh7372_cpuidle_init() depend only on CONFIG_CPU_IDLE. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Magnus Damm <damm@opensource.se>
2012-07-11ARM: shmobile: Take cpuidle dependencies into account correctlyMagnus Damm
The sh7372's cpuidle code uses cpu_suspend() and cpu_resume() in its implementation of the .enter() callback for deeper C-states, so make ARCH_SH7372 select ARM_CPU_SUSPEND if CPU_IDLE is set to satisfy all of the build dependencies (it has to be selected for CONFIG_PM as well for the system suspend handling). [rjw: Added the subject and changelog.] Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-06ARM: shmobile: fix platsmp.c build when ARCH_SH73A0=nMagnus Damm
Fix build error in the case of SMP=y but ARCH_SH73A0=n introduced by: 9601e87 ARM: shmobile: fix smp build The use of of_machine_is_compatible() will link in the the SoC-specific symbols: "sh73a0_get_core_count", "sh73a0_smp_prepare_cpus", "sh73a0_secondary_init" and "sh73a0_boot_secondary". This patch adds an ugly #ifdef wrapper as a stop-gap solution. Signed-off-by: Magnus Damm <damm@opensource.se> Tested-by: Tested-by: Simon Horman <horms@verge.net.au> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-06ARM: mach-shmobile: sh7377 generic board support via DTMagnus Damm
Add generic DT board support for the sh7377 SoC. SCIF serial ports and timers are kept as regular platform devices. Other on-chip and on-board devices should be configured via the device tree. At this point there is no interrupt controller support in place but such code will be added over time when proper IRQ domain support has been added to INTC. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-06ARM: mach-shmobile: r8a7740 generic board support via DTMagnus Damm
Add generic DT board support for the r8a7740 SoC. SCIF serial ports and timers are kept as regular platform devices. Other on-chip and on-board devices should be configured via the device tree. At this point there is no interrupt controller support in place but such code will be added over time when proper IRQ domain support has been added to INTC. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-06ARM: shmobile: sh7372: completely switch over to using pm-rmobile APIKuninori Morimoto
Now, all sh7372 platforms are switched over to use pm-rmobile base PM domain, and no one is using original sh7372_pm_domain APIs. We can remove these, switching has been fully completed. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-25 04:14:11 +0000