Age | Commit message (Collapse) | Author |
|
When device is idle and display is on, the minimal
cpu frequency can drop to 51mhz. Since it takes several
tens of millisecond to ramp up cpu freq, the delay
impact negatively the performance of low latency CPU bound
tasks.
Given the power savings of several milliwatts running cpu
at 51mhz comparing to 102mhz or 204 mhz at idle, the idle
cpu freq is hence raised to 102mhz for smart panel device
and 204mhz for dump panel devices.
Bug 1036216
Change-Id: Ifb0ed88d4c5fcf5b637d09c587322cec72b8a08d
Signed-off-by: Wen Yi <wyi@nvidia.com>
(cherry picked from commit c8465feffcd0cf2401bbd6c6f535955dd68bda55)
Reviewed-on: http://git-master/r/132479
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Ujjaval Patel <upatel@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
Bug 1029431
Change-Id: I79ba7e363feeaec86912445ce005ea65a3960718
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: http://git-master/r/127994
Reviewed-by: Lokesh Pathak <lpathak@nvidia.com>
Tested-by: Lokesh Pathak <lpathak@nvidia.com>
|
|
Set the register values for each of the board files to
keep the Core voltage to 0.95V in LP1.
This change is only for those platforms where LP1 is supported.
Enterprise and Kai are the main platforms for this change. There
is no support for Cardhu for LP1 and so is left blank and the
feature will be skipped for Cardhu platforms, except for AP37.
AP37 with a PM269 board needs this change and so Cardhu board
file is updated with the values specific to AP37.
This change is part of the feature to set VCore to 0.95V
Refer to http://git-master/r/124135 for more details
Bug 1035684
Change-Id: I6d1d984b0e7968b441cebbc37705c25647a4a85a
Signed-off-by: Karthik Ramakrishnan <karthikr@nvidia.com>
(cherry picked from commit b46921e475bd95e729896a6763bc94df1e03ee4a)
Reviewed-on: http://git-master/r/124780
Reviewed-by: Lokesh Pathak <lpathak@nvidia.com>
Tested-by: Lokesh Pathak <lpathak@nvidia.com>
|
|
Bug 1002637
Change-Id: I1271f95e8c174422bcb93eed3cc2bd7df8012479
Signed-off-by: Seema Khowala <seemaj@nvidia.com>
Reviewed-on: http://git-master/r/123537
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Scott Peterson <speterson@nvidia.com>
|
|
The mfd sub devices should get added through the
mfd_add_devices() not through legacy style of
adding sub devices.
Change-Id: If275d41629d799f1e22d95fd442ebe7d3ace448e
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/121137
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
|
|
Register General Purpose ADC driver of TPS80031 as
mfd sub driver in place of adding it as a sub devices.
This is inline with the mfd driver policy.
Change-Id: Ib3f86f05716baef96ee534eec5ae262627c6a853
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/121136
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
|
|
Register battery charger driver of TPS80031 as mfd
sub driver in place of adding it as a sub devices.
This is inline with the mfd driver policy.
Change-Id: I8cff39f5c9b22434f7c5b9d4ed9f3865ff4c0001
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/121135
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
|
|
Register battery gauge driver of TPS80031 as mfd
sub driver in place of adding it as a sub devices.
This is inline with the mfd driver policy.
Change-Id: I15765be19fc138695de2d813e5fa025400747c86
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/121134
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
|
|
register RTC driver of TPS80031 as mfd sub
driver in place of adding it as a sub devices.
This is inline with the mfd driver policy.
Change-Id: I2f9c13478a1e85c9670dd7bc576ec761f2e24733
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/121133
Reviewed-by: Automatic_Commit_Validation_User
|
|
The macro FIXED_REGS_COMMON used in only one place and it
is no more common across A02 and A04 and hence removing
this. Also remove unnecessary back slash.
Change-Id: If56512a3f957d06406e9baf369dd409feb82b55b
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/121132
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
|
|
Converting tps80031 regulator driver to be register as mfd
sub device of the tps65910 and register all its regulators from
single probe calls.
Add separate platform data for the regulator to be supply from
board as part of tps80031 platform data.
Change-Id: Ie65b25f3058202070f7f917e64a4a660dd941210
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/119976
|
|
The platform data of tps80031 have the regualtor_init_data as
non-pointer type. Converting this as pointer type for aligning
to regulator driver policy and easy support for DT.
Change-Id: I07f574953b09e0ed9ec3735d0ee7999ca35bee61
Reviewed-on: http://git-master/r/119974
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
Provide name for all tps80031 regulator rails locally
in place of depending on the name provided by driver.
Change-Id: I845d0b27077ff6362ab1d19ba7c057260de3722e
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/119973
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
This reverts commit 70e40e9cf025c73fde46d1a5577547dc37182a64
Change-Id: Iaf390c0d3ea16686f619f321bceea572ee7434fc
Reviewed-on: http://git-master/r/119802
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
The gpio mode of pin is configured when setting
direction and hence this call is no more required.
Change-Id: I3f81c54d2e1933684689df88814b98f617da3545
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/119611
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
This reverts commit 5bc340e408aa3f009651735c71f3c97676fbe79f
Change-Id: I70e40e9cf025c73fde46d1a5577547dc37182a64
Reviewed-on: http://git-master/r/119800
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
Renaming the regulator name from TPS80031_ID_* to
TPS80031_REGULATOR_* for better readability.
Change-Id: I6176cb213d23e44061549fd1e81306756a324523
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
|
|
In place of using the separate platform data for configuring
regualtor's init states, pass all information through
regulator init data only.
Change-Id: I76f05bfa0da1b8867e7d4d5578ed9067eed6a882
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
|
|
Fix issues causing the kernel build to fail with CONFIG_SMP not set.
Change-Id: I8c7a49970e55354e38ce41d2d1e0dab00ba78f24
Signed-off-by: Alex Waterman <alexw@nvidia.com>
Reviewed-on: http://git-master/r/114317
Reviewed-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
Tested-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
|
|
Allow 3mv tolerance on minimum voltage side for cpu voltage.
This saves power when system require 900/975mV.
bug 997415
Change-Id: I273cdeda6980f5ddf50be7980bced443b386dae8
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/110524
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
OFF the rails when the system is in sleep state. The rails are
linked withe xternal req PREQ1 which is the core_pwr_req line.
Followng rails are attached to PREQ1:
SMPS2, SMPS4, LDOUSB will be attached to PREQ1
LDOLN, LDO7, LDO6, LDO4, LDO1
CLK32KG, SYSEN, REGEN2, REGEN1 will be attached to PREQ1
bug 979143
Change-Id: I20973faa78ef61fcd03cbe34445f94c36e280544
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Change-Id: I2ba5ca2aa1732222628d68f61d77acff88092d81
Reviewed-on: http://git-master/r/111185
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Thomas Cherry <tcherry@nvidia.com>
|
|
- Adding flag to treat warning as error.
- Handling warnings of unused variable, structures and functions,
wrong return type, wrong type comparision.
Bug 949219
Change-Id: I9d02387ce1073c4e46f69d01669285aa3754f1d9
Signed-off-by: Sanjay Singh Rawat <srawat@nvidia.com>
Reviewed-on: http://git-master/r/104968
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
Removing tegra_gpio_enable and disable calls
from board files as they are supported through
set direction calls in the driver
Bug 984439
Change-Id: I011fc1ec52b31b1b0602d577f02a6d20f37e402d
Signed-off-by: Ashwini Ghuge <aghuge@nvidia.com>
Reviewed-on: http://git-master/r/102773
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Rakesh Goyal <rgoyal@nvidia.com>
Reviewed-by: Venkat Moganty <vmoganty@nvidia.com>
|
|
Bug 986402
Change-Id: Icf06b136c602639fc84ea822db8cf54078ace5fd
Signed-off-by: Tom Cherry <tcherry@nvidia.com>
Reviewed-on: http://git-master/r/104270
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
Removed unused wake header file from Tegra board files
bug 980993
Change-Id: I61d919a2dc5b98caaca612b990fd1a7d06e76ae2
Signed-off-by: Bitan Biswas <bbiswas@nvidia.com>
Reviewed-on: http://git-master/r/103622
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
Register vdio_sdmmc3 supply with a valid device id
instead of NULL.
Bug 982788
Change-Id: Ie19d8a48b381190e8f966928a785af0f51794cb1
Signed-off-by: Pavan Kunapuli <pkunapuli@nvidia.com>
Reviewed-on: http://git-master/r/101971
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
|
|
bug 978829
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/99460
(cherry picked from commit b5531673e3da75f2406685ce377f39d76f494162)
Change-Id: I5280dedb460df9852cc39d1c17132319e202c7b2
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/100524
Reviewed-by: Automatic_Commit_Validation_User
|
|
LDO3 has the input from the VIO output and hence VIO should be
register before LDO3 for regulator registration.
bug 976254
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/99446
Change-Id: I6771af3e7eb93886e974695ab3550cdf8ebc52c4
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/100262
Reviewed-by: Automatic_Commit_Validation_User
|
|
AVDD_DSI_CSI is shared by modem and dsi. If DSI turns
off this rail then HSIC fails after wakeup from modem.
This patch provides a way to turn on this rail from
modem as well as from DSI. Create two virtual power rails
from avdd_csi_dsi to control it from both the drivers separately.
This is enterprise specific change as per the power rail layout.
Bug 920881
(cherry picked from commit ab52b51c59f776ae770d48a28a2744e2db2e5d2f)
Reviewed-on: http://git-master/r/85656
Change-Id: I2e9c04a8f4e8d6fd20584b4e75657c1cb6d5c8bd
Signed-off-by: Vinayak Pane <vpane@nvidia.com>
Reviewed-on: http://git-master/r/89134
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Puneet Saxena <puneets@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
It is observed that voltage rails for 3V3 is taking around 400us
for setting it output. Providing the startup delay of 500us for this
rail so that rails are stablized at desired level before any consumer
uses that rail.
Bug 959902
Change-Id: I602b428db44d595a94d69fccb3340a77c3819a3b
Signed-off-by: Chaitanya Bandi <bandik@nvidia.com>
Reviewed-on: http://git-master/r/94537
Reviewed-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
Tested-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
|
|
Bug 958089
Reviewed-on: http://git-master/r/92054
(cherry picked from commit 92ff85f937cefc0fbe029607e23557adcf13f9fd)
Change-Id: I7e8815f758c2527da3ab635f102888e5a6d5e951
Signed-off-by: Tom Cherry <tcherry@nvidia.com>
Reviewed-on: http://git-master/r/94118
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
|
|
Bug 939799
Reviewed-on: http://git-master/r/90824
(cherry-picked from commit 8c556f816196c17e059db2c11b966ca89848efa3)
Change-Id: I67b26958862b8b60217c2750fe0b2eef3013d9b3
Signed-off-by: Tom Cherry <tcherry@nvidia.com>
Reviewed-on: http://git-master/r/92409
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
Bug 941960
Removed CONFIG_TEGRA_INTERNAL_TSENSOR_EDP_SUPPORT.
Add internal tsensor on kai.
Change-Id: Iaefa43112fbbaa42d43a428ecb86ad821e683f85
Signed-off-by: Hao Tang <htang@nvidia.com>
Reviewed-on: http://git-master/r/84350
Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
|
|
We don't need a static bool here, there's already a function that does
this.
Change-Id: Icacf9dc2fccf2fc780cd7d37121f3eeedbe7fb40
Signed-off-by: Dan Willemsen <dwillemsen@nvidia.com>
Reviewed-on: http://git-master/r/83623
Reviewed-by: Varun Colbert <vcolbert@nvidia.com>
Tested-by: Varun Colbert <vcolbert@nvidia.com>
|
|
Opt into the tps80031 registering the pm_power_off handler instead of
doing it ourselves.
Change-Id: I7cf4bb576fa88969332cbe9e32165a4af2fee8f0
Signed-off-by: Dan Willemsen <dwillemsen@nvidia.com>
Reviewed-on: http://git-master/r/83593
Reviewed-by: Varun Wadekar <vwadekar@nvidia.com>
|
|
Instead of using sdmmc3_vdd_sel as a fixed regulator, convert it
to a gpio-regulator.
Change-Id: I459f9a4afc4b7dd3f6f2147483b938887764d355
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Reviewed-on: http://git-master/r/77742
Reviewed-by: Automatic_Commit_Validation_User
|
|
Move gpio regulators into their own table to avoid incorrect cast in
fixed regulator initialization function.
Reviewed-on: http://git-master/r/76761
Change-Id: If98790dc843d7e1d7201a62f4977e15ae18502ca
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Reviewed-on: http://git-master/r/77735
Reviewed-by: Automatic_Commit_Validation_User
|
|
Using fixed regulator in place of gpio-switch regulator
Fixed regulator is very similar to gpio-switch regulator
and it is available by default in linux kernel.
bug 923713
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Change-Id: Ib51874e4ba90750234d8c80735e9230669a0dee8
Reviewed-on: http://git-master/r/74249
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
Reviewed-on: http://git-master/r/75545
Reviewed-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
Tested-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
|
|
The baseband needs this clock to keep track of time when it is
in low power mode.
bug 915105
Change-Id: I864c81e85f34e5fca2ddd5444776748e80d57146
Reviewed-on: http://git-master/r/74584
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Rakesh Goyal <rgoyal@nvidia.com>
Reviewed-by: Frederic Bossy <fbossy@nvidia.com>
Tested-by: Greg Heinrich <gheinrich@nvidia.com>
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
Tested-by: Jonathan Roux <jroux@nvidia.com>
Reviewed-on: http://git-master/r/75144
Reviewed-by: Varun Wadekar <vwadekar@nvidia.com>
Tested-by: Varun Wadekar <vwadekar@nvidia.com>
Reviewed-by: Greg Heinrich <gheinrich@nvidia.com>
|
|
mach-tegra/tegra3_tsensor.h is used for the parameterized initialization
of the tsensor device. mach-tegra/include/mach/tsensor.h is used for the
tsensor device driver.
Really, mach-tegra/tegra3_tsensor.c should go away - probably becoming a
device driver.
Change-Id: I16edae878f1e97d1654252cfee49cd9dd7f77db7
Signed-off-by: Dan Willemsen <dwillemsen@nvidia.com>
Reviewed-on: http://git-master/r/72481
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
TPS80031_CLOCK32K_G is used by wifi, BT and GPS. Communication module expect
this clock to be always on.
Bug 914485
Change-Id: I73001ec1ca129d86f881467d22ac020fccf4561c
Signed-off-by: Rakesh Goyal <rgoyal@nvidia.com>
Reviewed-on: http://git-master/r/72182
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
|
|
Init code for system edp tables for Enterprise (aka battery edp
capping, aka battery peak current management); disabled by default.
Change-Id: I8cff00dba18576a3fabf5542e609bca010de9d0f
Signed-off-by: Anshul Jain <anshulj@nvidia.com>
Reviewed-on: http://git-master/r/65612
Reviewed-on: http://git-master/r/69107
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Peter Boonstoppel <pboonstoppel@nvidia.com>
Reviewed-by: Dan Willemsen <dwillemsen@nvidia.com>
|
|
Register the battery peak current management device, that can trigger
cpu frequency/voltage change when GPIO is triggered by battery current
monitoring device.
Change-Id: I5a79ed2d3e057a51a7dc3953b8c252f4ee5b9a6a
Signed-off-by: Anshul Jain <anshulj@nvidia.com>
Reviewed-on: http://git-master/r/68816
Reviewed-on: http://git-master/r/69104
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Lokesh Pathak <lpathak@nvidia.com>
Tested-by: Lokesh Pathak <lpathak@nvidia.com>
|
|
- Disabling HDMI CEC, which is generally not supported by T30.
- Clear APBDEV_PMC_DPD_PADS_ORIDE_0_BLINK at boot time
- Pull down CLK_32K_OUT/BLINK
Bug 898597
Cherry-picked From: http://git-master/r/#change,63408
Signed-off-by: Daniel Solomon <daniels@nvidia.com>
Change-Id: Ic6e6a5ddf16adf9e8f5a847a31ce7c902e3df9bc
Reviewed-on: http://git-master/r/68558
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
Bug 860351
Bug 850614
Bug 852480
Bug 872156
Bug 824459
Change-Id: Ied7c156bf61024965592a792439699bf0226fe60
Signed-off-by: Erik Lilliebjerg <elilliebjerg@nvidia.com>
Reviewed-on: http://git-master/r/66167
Reviewed-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
Tested-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
|
|
Configuring the rails output such that it consumes less power
in system sleep (LP0) state.
bug 885911
Reviewed-on: http://git-master/r/66681
(cherry picked from commit 085c29e27f5417f5c508d4348b49b627788394de)
Change-Id: I7b067f24321935eb6327cdd25c3e96d04ab52b99
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/68423
|
|
Bug 902267
Reviewed-on: http://git-master/r/65007
(cherry picked from commit 025eabb99385865e582e0c3124ae76b985021069)
Signed-off-by: Diwakar Tundlam <dtundlam@nvidia.com>
Change-Id: I70d3d889974c8455a614fdfdda41a2be099bef70
Reviewed-on: http://git-master/r/68004
Reviewed-by: Diwakar Tundlam <dtundlam@nvidia.com>
Tested-by: Diwakar Tundlam <dtundlam@nvidia.com>
|
|
Providing the clock configuration through clock init structure.
Reviewed-on: http://git-master/r/67075
(cherry picked from commit 18f4f66a1f623a8f4b1d05283232a7f98d89ace9)
Change-Id: I74287209505a0bf182594ea7b4ec147997c699fc
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/67335
|
|
bugid 897071
Reviewed-on: http://git-master/r/63432
Signed-off-by: Diwakar Tundlam <dtundlam@nvidia.com>
(cherry picked from commit c37d623192e6c07950c711eb9cbc584813567cd7)
Change-Id: Id7faa07f9b7ccc779557a79bb704b901fd67436e
Reviewed-on: http://git-master/r/65289
Reviewed-by: Diwakar Tundlam <dtundlam@nvidia.com>
Tested-by: Diwakar Tundlam <dtundlam@nvidia.com>
Reviewed-by: Varun Colbert <vcolbert@nvidia.com>
Tested-by: Varun Colbert <vcolbert@nvidia.com>
Rebase-Id: Rb62dd30fc38085b89f5921c87e4115472221c622
|
|
Adding battery present support to fuel-gauge driver
so as not to report battery charecterstics when
battery is not present
bug 873965
Reviewed-on: http://git-master/r/61831
(cherry picked from commit f7087f71f5ed04d5a6c88fa6c8296f85029e2efd)
Change-Id: I3cf95d530845388d189ef860ba4ee7d933dd3fd8
Reviewed-on: http://git-master/r/64091
Reviewed-by: Varun Colbert <vcolbert@nvidia.com>
Tested-by: Varun Colbert <vcolbert@nvidia.com>
Rebase-Id: Rdaf381deafc9f549522779d7e3baad21f3cd7834
|