summaryrefslogtreecommitdiff
path: root/arch/arm/mach-tegra/board-macallan-power.c
AgeCommit message (Expand)Author
2013-06-27arm: tegra: soctherm: fix heavy throttling on GPU zoneDiwakar Tundlam
2013-06-23ARM: tegra: add usb_vbus entry for OTG driverRohith Seelaboyina
2013-06-11ARM: tegra: set macallan sys EDP cap to 24WSivaram Nair
2013-06-08ARM: tegra: macallan: Set max clk to 156MHz for sdR Raj Kumar
2013-06-06ARM: tegra11: updating tegra sys EDP tablesSivaram Nair
2013-06-03ARM: tegra: thermal sensor regulatorBitan Biswas
2013-06-03ARM: tegra114: register excon power supply driverLaxman Dewangan
2013-06-03arm: tegra: macallan: enable OC4 interruptTony Liu
2013-06-03ARM: tegra: macallan: move battery model data to common INI fileLaxman Dewangan
2013-05-31arm: tegra: macallan: add ini file for yoku 4100mAh batterySyed Rafiuddin
2013-05-31ARM: tegra: dynamically init sys EDP capSivaram Nair
2013-05-31ARM: tegra: Adjust temperature margin for CPU EDPDiwakar Tundlam
2013-05-15tegra: allow tegratab support to be compiled with other platformsAlexandre Courbot
2013-05-13arm: tegra: macallan: set the LDO5 to 2.8VHunk Lin
2013-05-10ARM: tegra: dvfs: Add CL-DVFS platform flagsAlex Frid
2013-05-10arm: tegra: macallan: only register fuel gauge when using batteryKerwin Wan
2013-05-08arm: tegra: macallan: set apply_uV for LDOsHunk Lin
2013-05-08ARM: tegra: add macallan psy_depletion board dataSivaram Nair
2013-05-08ARM: tegra: adding macallan core clientSivaram Nair
2013-05-08ARM: tegra: add macallan sysedp managerSivaram Nair
2013-05-03ARM: tegra: macallan: Change slew rate of vdd_cpu to 2.5mV/usHayden Du
2013-04-30arm: tegra: macallan: register fuel gauge for E1569Kerwin Wan
2013-04-26arm: tegra: macallan: correct the roof_floors of ldosHunk Lin
2013-04-24arm: tegra: macallan: correct the roof_floor for some railsKerwin Wan
2013-04-22ARM: tegra114: set always-on and boot-on if externally controlledLaxman Dewangan
2013-04-16arm: tegra: macallan, tegratab: edit bq2419x platform dataHyongbin Kim
2013-04-16arm: tegra: macallan: add bq2419x platform dataSyed Rafiuddin
2013-04-16power: bq2419x: Implement WDT timerSyed Rafiuddin
2013-04-12arm: tegra: macallan: fix camera power rails on E1569Kerwin Wan
2013-04-12ARM: tegra: macallan: enable OTG ID pin detect through PMICYunfan Zhang
2013-04-09ARM: tegra: power: Add LP1 cold low voltage parameterDaniel Solomon
2013-04-09arm: tegra: macallan: correct pinmux of vddio_hv bankHunk Lin
2013-04-02arm: tegra: macallan: add power detect railsHunk Lin
2013-03-29arm: tegra: macallan: set vdd_rtc to 950mV during lp0Kerwin Wan
2013-03-28extcon: palmas: make vbus/ID cable detection to platform choiceLaxman Dewangan
2013-03-25arm: tegra: macallan: set LDO8's voltage to 0.9V in LP0Hunk Lin
2013-03-22arm: tegra: board support for sensorsErik Lilliebjerg
2013-03-22ARM: tegra11: Add voltage capping trip pointsAmit Kamath
2013-03-21arm: tegra: macallan: set initial mode of some smps to NORMALKerwin Wan
2013-03-19arm: tegra: macallan: using soc_them as cooling devices for DVFS.Hayden Du
2013-03-19ARM: tegra114: remove palmas pad configuration from platform dataLaxman Dewangan
2013-03-19ARM: tegra11: use palmas pincontrol for pad configurationLaxman Dewangan
2013-03-19ARM: tegra: macallan: enable vbus power off on suspendYunfan Zhang
2013-03-19arm: tegra: soctherm: Program hotspot offsets specifiedDiwakar Tundlam
2013-03-18arm: tegra: Board files settings for LP1 Low Core VoltageKarthik Ramakrishnan
2013-03-15ARM: tegra: macallan: vdd_core consumers for sdmmcKerwin Wan
2013-03-15arm: tegra: macallan: Enable pid_thermal_gov as default for Tj throttlingJinyoung Park
2013-03-13arm: tegra: macallan: add regulator for gyro sensorKerwin Wan
2013-03-05arm: tegra: macallan: set cpu_lp2_min_residency to 1000Kerwin Wan
2013-02-28arch: arm: macallan: Change analog power for touchXiaohui Tao
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-02 18:03:40 +0000