summaryrefslogtreecommitdiff
path: root/arch/arm/plat-mxc/Kconfig
AgeCommit message (Collapse)Author
2012-10-17ENGR00180956-2: Add FlexTimer PWM support on FaradayAlison Wang
The FlexTimer work on PWM mode with EPWM and CPWM supported. The API configures each FTM channels the same due to pwm subsystem interface restriction. Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-09-12ENGR00180931-1 mvf: add MSL support for MVF platformAlison Wang
Add MSL support for MVF platform. Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-01-09ENGR00155147 mx5x mx6x: adjust dma zone max size to 184MJason Chen
adjust dma zone max size to 184M. keep default size as 96M. Signed-off-by: Jason Chen <b02280@freescale.com>
2012-01-09ENGR00153762 imx6q MSL: increase DMA zone size to max 184Jason Chen
when we need enable 1080p 32bpp display and play a 1080p h264 clip, it may meet memory allocation fail issue. This patch fix this issue. Signed-off-by: Jason Chen <b02280@freescale.com>
2012-01-09ENGR00139229-1 MX6: Bring up i.MX6 sabreauto with Single coreZeng Zhaoming
MSL code for bring up MX6 sabreauto board with Single core. Merged from testbuild:imx6_bringup branch. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Jason Liu <r64343@freescale.com> Signed-off-by: Ranjani Vaidyanathan <ra5478@freescale.com> Singed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Richard Zhu <r65037@freescale.com> Signed-off-by: Anish Trivedi <anish@freescale.com> Signed-off-by: Dong Aisheng <b29396@freescale.com> Signed-off-by: Jason Chen <b02280@freescale.com> Signed-off-by: Lily Zhang <r58066@freescale.com> Signed-off-by: Sammy He <r62914@freescale.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Terry Lv <r65388@freescale.com> Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Zeng Zhaoming <b32542@freescale.com> Merged-by: Zeng Zhaoming <b32542@freescale.com> Reviewed-by: Jason Liu <r64343@freescale.com> Reviewed-by: Frank Li <Frank.Li@freescale.com>
2012-01-09ENGR00141399-2 iMX5x: add clock debug informationRichard Zhao
Expose clock debug information to debugfs, which makes it easier for clock system debug by using tools like powerdebug developed by Linaro power management group. For long term, this can go into common clock framework, but so far it depends on the process of common clk API development. Once the common clk API is ready in upstream, the clock debug information will be based on it too. The implementation based on common clk API had also been finished and reviewed with Jeremy. ARM: iMX5x: fix clock debug enable_count error Signed-off-by: Yong Shen <yong.shen@linaro.org> Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Jason Chen <b02280@freescale.com>
2012-01-09ENGR00141399-1 Add MX50 support for 2.6.38Ranjani Vaidyanathan
mx50_rdp: add ocotp device mx50_rdp: add dcp device mx50_rdp: Add RNGB device support for MX50 PM: Fix suspend_iram_base can't execute code Signed-off-by: Ranjani Vaidyanathan <ra5478@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Anish Trivedi <anish@freescale.com>
2012-01-09ENGR00141217-3 MX53 MSL part upgrade to 2.6.38Frank Li
imx51_babbage: imx53_smd: add i2c device imx53_smd: add i2c board device info imx53_smd: add esdhc device support imx53_smd: Add SRTC devices imx53_smd: enable the AHCI SATA imx53_smd: Add GPIO Keypad support imx53_ard: enable ARD board bootup imx53_ard: add ethernet pin mux imx53_ard: add smsc911x device imx53_loco: add i2c device imx53_loco: change sii902x i2c device imx53_loco: register v4l2 output device imx53_loco: add srtc device imx53_loco: enable the AHCI SATA imx53_loco: Add GPIO Keypad support imx53_evk: add evk and arm2 boards io setting and set up display imx5: add ipu\vpu imx5: clock.c: remove RATE_PROPAGATES imx5: Add clock, dvfs, busfreq, sdram_autogating support. imx5: fix warnings on boot imx5: add v4l2 device imx5: add board_is_rev support imx5: Add sdma support for i.Mx53 and i.Mx51 imx5: add p1003 imx5: add ipuv3 imx5: add sata imx5: add pmic board files imx5: add pm function imx5: add iram config imx5: add gpu imx5: fix clock debug enable_count error imx53: add gpio irq support for mx53 imx53: change PWM backlight device register method to dynamic imx53: change v4l2 device register method to dynamic imx53: add vpu devices support imx53: add dvfs-core and busfreq devices register method imx53: Add usb devices imx53: add i2c pad settings imx53: add ssi support Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Jason Chen <b02280@freescale.com> Signed-off-by: Zeng Zhaoming <b32542@freescale.com> Signed-off-by: Richard Zhu <r65037@freescale.com> Signed-off-by: Zhou Jingyu <Jingyu.Zhou@freescale.com> Signed-off-by: Zhang Yan <b34916@freescale.com>
2011-05-19ARM: imx: move mx3 support to mach-imxUwe Kleine-König
Fixing a few "please, no space before tabs" and "empty line at end of file" warnings on the way. LAKML-Reference: 1299271882-2130-6-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-05-19ARM: mxc: don't allow to compile together i.MX51 and i.MX53Uwe Kleine-König
The two SoCs have different PHYS_OFFSETs so it's not (yet) possible to compile a single (working) kernel for these. LAKML-Reference: 1302464943-20721-4-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-05-19ARM: mxc: don't use the symbols in the CPU family choice to select othersUwe Kleine-König
The symbols in this choice should only be used to select between the available machines that can be built into a single kernel. As these sets (will) differ e.g. depending on ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR letting them select other symbols makes the logic more complex and needs to duplicate some things. So let the machines select the corresponding symbols (indirectly via SOC_XYZ). LAKML-Reference: 1302464943-20721-2-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-05-19ARM: remove support for mxc91231Uwe Kleine-König
Since support for mxc91231 was introduced 2009 it only saw patches that were part of (mxc or arm) global cleanups. The only supported machine only had 4 devices (2x UART, sdhc, watchdog). Cc: Dmitriy Taychenachev <dimichxp@gmail.com> LAKML-Reference: 1302211482-17926-1-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mxc91231: select MXC_AVICUwe Kleine-König
This fixes: arch/arm/kernel/built-in.o: In function `__irq_svc': io.c:(.text+0x2e0): undefined reference to `avic_base' arch/arm/kernel/built-in.o: In function `__irq_usr': io.c:(.text+0x4c8): undefined reference to `avic_base' arch/arm/mach-mxc91231/built-in.o: In function `mxc91231_init_irq': magx-zn5.c:(.init.text+0x18): undefined reference to `mxc_init_irq' and was broken by c7259df (ARM i.MX irq: Compile avic irq code only on SoCs that need it) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24ARM i.MX51: Make CONFIG_MXC_TZIC an invisible optionSascha Hauer
There's no point showing this option to the user. The correct value will be selected anyway. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24ARM i.MX irq: Compile avic irq code only on SoCs that need itSascha Hauer
This patch adds a Kconfig option for the avic irq controller and lets the SoCs that need it select this option. Also, as we have two irq controllers for i.MX, irq.c is not appropriate anymore, so rename it to avic.c Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-19ARM: imx: move mx25 support to mach-imxUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-10-19ARM: imx: Add iram allocator functionsDinh Nguyen
Add IRAM(Internal RAM) allocation functions using GENERIC_ALLOCATOR. The allocation size is 4KB multiples to guarantee alignment. The idea for these functions is for i.MX platforms to use them to dynamically allocate IRAM usage. Applies on 2.6.36-rc7 Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Reviewed-by: Amit Kucheria <amit.kucheria@canonical.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-09-27ARM: imx: Add EPIT supportSascha Hauer
The Enhanced Periodic Interrupt Timer (EPIT) is found on newer i.MX SoCs and can be used as an alternative system timer. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-08-21ARM: imx: set cache line size to 64 bytes for i.MX5Jason Wang
The core of i.MX5 series is cortex-A8, its cache line size is 64 bytes instead of 32 bytes. Refer to the OMAP3's selection, we choose 64 bytes for i.MX5, this can increase a little bit performance when perform cache operations. Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mxc: add common debug board for 3-stack platformsJason Wang
The debug board is little different for all mxc 3-stack(PDK) platforms, it is possible here to add a common implementation to support this board. Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26Merge branch 'imx/for-2.6.36' of git://git.pengutronix.de/git/ukl/linux-2.6 ↵Uwe Kleine-König
into HEAD There are some more conflicts than detected by git, namely support for the newly added cpuimx machines needed to be converted to dynamic device registration. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Conflicts: arch/arm/mach-imx/Makefile arch/arm/mach-imx/devices.c arch/arm/mach-imx/devices.h arch/arm/mach-imx/eukrea_mbimx27-baseboard.c arch/arm/mach-mx2/Kconfig arch/arm/mach-mx25/Makefile arch/arm/mach-mx25/devices.c arch/arm/plat-mxc/include/mach/mx25.h arch/arm/plat-mxc/include/mach/mxc_nand.h
2010-07-26i.MX25: add AUDMUX and SSI supportEric Bénard
* add clocks for audmux and ssi 1 & 2 * add irq for ssi 1 & 2 * add devices platform for ssi1 & 2 * update audmux-v2 for i.MX25 * add base addresses for audmux & ssi 1 & 2 * add iomux configuration for GPIO for AUD5 port Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-06-30ARM: imx: Change the way nand devices are registered (generic part)Uwe Kleine-König
Instead of having a platform device defined in a devices.c and register it in the machine file allocate it dynamically. This reduces the size of needed memory as the new function is discarded after init and only the existing devices are created. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30ARM: imx: prepare deprecating ARCH_MX1, MACH_MX2, MACH_MX21 and MACH_MX27Uwe Kleine-König
MACH_... is reserved for machine support, so use SOC as prefix, not MACH. This introduces new symbols SOC_IMX1, SOC_IMX21 and SOC_IMX27. They are selected by the old symbols for now. There is no substitute for MACH_MX2 as most usages of MX2 only means MX21 + MX27 but not MX25. Later the choice about CPU and CPU family should go away and the individual machines should select the right SOC symbol. This is a precondition to support more than one SOC in a single kernel image. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30ARM: imx: move mx1 support to mach-imxUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-24ARM: imx: rename mach dir for mx21 and mx27 to mach-imxUwe Kleine-König
Finally all imx code should end up there, start with mach-mx2. While touching all files rename some files to use a hyphen instead of an underscore. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-25Merge branch 'mxc-master' of git://git.pengutronix.de/git/imx/linux-2.6 into ↵Uwe Kleine-König
imx/master Removed selection of COMMON_CLKDEV by CONFIG_ARCH_MX5. This is handled in 03e09cd8902717b66f940357257d8ad76114d9f2. arch/arm/plat-mxc/iomux-mx1-mx2.c was moved to arch/arm/plat-mxc/iomux-v1.c in 5e2e95f520538e095d10456acd28d9107317aa32 and got bug fixed in 5c17ef878fa25e04b1e8f1d8f5fa8b267753472c. The bug in arch/arm/plat-mxc/iomux-v1.c isn't present any more since bac3fcfad565c9bbceeed8b607f140c29df97355, so arch/arm/plat-mxc/iomux-mx1-mx2.c is simply deleted. Conflicts: arch/arm/plat-mxc/Kconfig arch/arm/plat-mxc/Makefile arch/arm/plat-mxc/iomux-mx1-mx2.c Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-24mx25: move ARCH_MXC_IOMUX_V3 to the ARCH levelBaruch Siach
ARCH_MXC_IOMUX_V3 is not specific to the i.MX25 PDK platform. Thus, ARCH_MXC_IOMUX_V3 should be selected by ARCH_MX25. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-02-24arm/imx/iomux-v1: rename source file and reorganize Kconfig stuffUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-24arm/imx: don't depend on ARCH_MXC twiceUwe Kleine-König
MXC_IRQ_PRIOR, MXC_PWM and ARCH_HAS_RNGA are all defined in an "if ARCH_MXC" ... "endif" block, so they depend on ARCH_MXC anyhow. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-24arm/imx: let ARCH_MXC select COMMON_CLKDEV instead of each subfamilyUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-18imxfb: add support for i.MX25Baruch Siach
The commit also introduces the HAVE_FB_IMX config that is to be selected from the MX25 platform config. Once this commit gets merged, the two other i.MX archs, ARCH_MX1 and ARCH_MX2, should follow this one. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-02-09mxc: Add support for the Babbage board (i.MX5)Amit Kucheria
Babbage is a reference board from Freescale for their i.MX51 SoC. Add board definition, Kconfig and Makefiles to enable Freescale i.MX51 processor and Babbage board. Boot tested on a Babbage2.5 board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2010-02-09mxc: TrustZone interrupt controller (TZIC) for Freescale i.MX5 familyAmit Kucheria
Freescale i.MX51 processor uses a new interrupt controller. Add driver for TrustZone Interrupt Controller Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-11-14MXC: Add a digital audio multiplexer driverSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14MXC: Add support for ULPI ViewportsDaniel Mack
The ARC USB OTG Core has support for accessing ULPI tranceivers through so called ULPI viewports. Export a set of function for use with the USB OTG framework. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: linux-usb@vger.kernel.org Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14MXC: add basic MXC91231 supportDmitriy Taychenachev
Signed-off-by: Dmitriy Taychenachev <dimichxp@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14Add i.MX25 supportSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07[ARM] MXC: Switch MX1 to clkdev supportSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07i.MX31: Add hw-random for RNGAAlan Carvalho de Assis
This hw-random driver add support to RNGA hardware found on some i.MX processors. Signed-off-by: Alan Carvalho de Assis <acassis@gmail.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07imx: re-work of PWM, add i.MX21 supportHolger Schurig
* Kconfig enables now HAVE_PWM (this enables in turn the selection of CONFIG_BACKLIGHT_PWM) * changes CONFIG_ARCH_MXyy to CONFIG_MACH_MXyy * fix some register names to match those of the reference manual * write a stub code so that the PWM can be used to program the LCD backlight * convert from #ifdef CONFIG_ARCH_MXxx to cpu_is_mxXX() * remove unneeded defines and fix 80-column "violations" of checkpatch.pl Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07MXC: Add iomux support for MX35 SoCsSascha Hauer
This iomux is called iomux-v3 in the tree because it is the third known incarnation of MXC iomuxers. It is not only found on the MX35 but also on the MX51 and probably others. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13MX31 clkdev supportSascha Hauer
This patch adds clkdev support for i.MX31. This is done in a similar way done previously for i.MX27 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13arm/imx: Kconfig beautificationHolger Schurig
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13[ARM] MXC: add pwm driver for i.MX SoCsSascha Hauer
This driver has been tested on MX27/MX31. It should work on MX1/MX1 aswell, but the actual setting of the PWM is missing so far. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13[ARM] MX27 Clock reworkSascha Hauer
This changes MX27 to use common clkdev. It also cleans up MX27 clock support to be more readable. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-18[ARM] MX1: Add missing selection of ARM920TSascha Hauer
The MX1 only has one possible CPU type, ARM920T. Select it in Kconfig. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16patch-mxc-add-ARCH_MX1Paulius Zaleckas
Adds MX1 architecture to platform MXC. It will supersede mach-imx and let it die. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: Darius Augulis <augulis.darius@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-11-27[ARM] Arrange for platforms to select appropriate CPU supportRussell King
Rather than: config CPU_BLAH bool depends on ARCH_FOO || MACH_BAR default y if ARCH_FOO || MACH_BAR arrange for ARCH_FOO and MACH_BAR to select CPU_BLAH directly. Acked-by: Nicolas Pitre <nico@marvell.com> Acked-by: Andrew Victor <linux@maxim.org.za> Acked-by: Brian Swetland <swetland@google.com> Acked-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Bellido <ml@acolin.be> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-09MXC: Lets handle IRQ by priority, defined with exported API functionDarius Augulis
Signed-off-by: Darius Augulis <augulis.darius@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-18 03:09:20 +0000