summaryrefslogtreecommitdiff
path: root/arch/arm/plat-mxc
AgeCommit message (Expand)Author
2012-02-07ENGR00173731-4 MX6Q/ARCH : add mxs_reset_block()Huang Shijie
2012-02-07ENGR00173615 [mx5 mmc]fix mx5 build errorTony Lin
2012-02-07ENGR00173615-1 [mx6q]add mx6q_revision to common header fileTony Lin
2012-02-03ENGR00173586-1 [MX6] Add support to source GPT from 24MHzRanjani Vaidyanathan
2012-02-02ENGR00173659 MX6Q_UART Change Physical / Virtural Port mappingEric Sun
2012-02-01ENGR00172395-1 MX6Q_ARM2: add sgtl5000 audio driverGary Zhang
2012-01-31ENGR00173406-1 MX6Q : fix compiling errorHuang Shijie
2012-01-31net: remove mm.h inclusion from netdevice.hAlexey Dobriyan
2012-01-30ENGR00172475 [USB]Add wakeup entry for USB device on Kernel3.0Tony LIU
2012-01-25ENGR00172375 MX6Q Sabresd: Enable camera sensorsNancy Chen
2012-01-24ENGR00172676 MX6Q: Add suport for i.MX 6Q Sabre Smart DeviceNancy Chen
2012-01-19ENGR00172374-5: GPIO: use chained_irq_enter/exit pairJason Liu
2012-01-19ENGR00172374-4: remove platform _adjust_dma_zone functionJason Liu
2012-01-19ENGR00172374-1 i.mx: CPUFREQ: not use cpufreq_debug_printkJason Liu
2012-01-19ENGR00169906-3 MXS-DMA : add new flagsHuang Shijie
2012-01-19ENGR00171462-1 vpu: add BIT_PIC_RUN register in mxc_vpu.hSammy He
2012-01-19ENGR00171564-2 MX6Q ARM2: Enable TVIN based on AutoBoardEven Xu
2012-01-19ENGR00170444: [v3]imx6sabreauto adv7180 TVin portb37753
2012-01-09ENGR00170938-1 mxc hdmi: Enable HDMI output color space convertSandor Yu
2012-01-09ENGR00170945:mx6: clk: __clk_disable operates only when usecount > 0wu guoxing
2012-01-09ENGR00139278-1: Add MLB driver board level code for mx6qTerry Lv
2012-01-09ENGR00170891 [MX6]Disable WAIT mode and DVFSAnson Huang
2012-01-09ENGR00169681 MX6: Add GPIO keys for sabrreliteLin Fuzhen
2012-01-09ENGR00170518 imx6q-ard: add iomux esai pad settingsAdrian Alonso
2012-01-09ENGR00169872-1 rework hdmi initialization and hotplug sequenceAlan Tull
2012-01-09ENGR00169975: imx6sabreauto fix i2c iomux pad settingsAdrian Alonso
2012-01-09ENGR00170434: MX6 - Add support to read Silicon versionRanjani Vaidyanathan
2012-01-09ENGR00170342 PWM: fix pwm output can't be set to 100% full dutyYuxi Sun
2012-01-09ENGR00170244-1 ARM: AHCI: Enable PDDQ mode when no disk is attachedRichard Zhu
2012-01-09ENGR00170141: Fix debug messages generated by CPUFREQRanjani Vaidyanathan
2012-01-09ENGR00170145-1 ipuv3: add resource for overlay fb buffer reservationXinyu Chen
2012-01-09ENGR00161124 [dvfs, cpufreq] Use regulator API to set cpu voltageNancy Chen
2012-01-09fix the building warningsJason Liu
2012-01-09fix the smp boot errorJason Liu
2012-01-09fix build errorJason Liu
2012-01-09ENGR00170005: Enable DVFS-CORE at bootRanjani Vaidyanathan
2012-01-09ENGR00163052: CPUFREQ does not report correct frequencyRanjani Vaidyanathan
2012-01-09ENGR00163669-2 mx6q mipi_dsi: Add support for mipi dsi displayWayne Zou
2012-01-09ENGR00169509-1 ipuv3 fb: change wait for vsync ioctl irq from eof to nfackJason Chen
2012-01-09ENGR00163699-1 MX6Q: Add more mipi csi2 supported datatypeEven Xu
2012-01-09ENGR00169388-1 IMX/UART : add DMA fields for platform dataHuang Shijie
2012-01-09ENGR00163603-1 MX6Q/UART : enable DMA support in the MX6Q-ARM2 boardHuang Shijie
2012-01-09ENGR00163247-1 MX6Q: MIPI sensor add prp viewfinder and prp enc supportEven Xu
2012-01-09ENGR00162709 Add Support for MX6Q Sabre AutoEric Sun
2012-01-09ENGR00162792-2 [IMX6Q] mmc host pm caps should be board relatedRyan QIAN
2012-01-09ENGR00161951-2 [mx6q]performance monitor deviceTony Lin
2012-01-09ENGR00162646 [DVFS]Fix build warningAnson Huang
2012-01-09ENGR00162460:MX6-Revert "MX6-Disable PLL1 when CPU clk is below 400MHz."Ranjani Vaidyanathan
2012-01-09ENGR00139276-1 MX6 BT: Add basic bluetooth support to mx6 platformLionel Xu
2012-01-09ENGR00162334 Revert "ENGR00161764 mx6q: disable gc355 temporally"wu guoxing
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-05 00:16:52 +0000