| Age | Commit message (Collapse) | Author |
|---|
|
Linux 4.1-rc6
Conflicts:
arch/arm/boot/dts/zynq-7000.dtsi
Resolution summary:
Mainline had an earlier version of the commit, resolve in favor of the
newer patch in next/dt branch.
|
|
The Juno board has two keys connected to a PL061 GPIO block,
in accordance to DDI0524B "ARM Versatile Express Juno Development
Platform" revision 1.0, table 2-4 "GPIO (0) and GPIO (1) used
for additional user key entry". By trial-and-error I found that
these are connected to the two keys named "power" and "home"
on the motherboard.
Register the GPIO block and these two keys in the device tree
using the PL061 GPIO driver and the generic gpio keys.
- Map POWER, HOME, VOL+ and VOL- to the obvious input events.
- Map RLOCK to KEY_SCREENLOCK/KEY_COFFEE unless someone can
explain better what this is for.
- Map the NMI button to KEY_SYSREQ as this is used like so
in the SYSREQ debugging hack.
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
|
|
This board is based on Juno r0 with updated Cortex A5x revisions
and board errata fixes. It also contains coherent ThinLinks ports
on the expansion slot that allow for an AXI master on the daughter
card to participate in a coherency domain.
Support for SoC PCIe host bridge will be added as a separate series.
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Jon Medhurst <tixy@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Juno contains a GICv2m extension for handling PCIe MSI messages.
Add a node declaring the first frame of the extension.
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Jon Medhurst <tixy@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Juno based boards have a memory mapped timer @ 0x2a810000. This
is disabled on r0 version of the board due to an SoC errata.
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Jon Medhurst <tixy@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Prepare the device tree for adding more boards based on Juno r0.
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Jon Medhurst <tixy@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
During the review of the Juno DT files I've noticed that the GIC
node label had two digits swapped leading to a different address
being shown in the /sys/devices fs.
Sudeep also pointed that public revisions of the Juno documentation
list a different frequency for the FAXI system than what the one
I've been using when creating the DT file. Verified with the firmware
people to be the correct value in the shipped systems.
Reported-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Jon Medhurst <tixy@linaro.org>
|
|
The clock generator in IOFPGA generates the two source clocks: 32kHz and
1MHz for the SP810 System Controller.
The SP810 System Controller selects 32kHz or 1MHz as the sources for
TIM_CLK[3:0], the SP804 timer clocks. The powerup default is 32kHz but
the maximum of "refclk" and "timclk" is chosen by the SP810 driver.
This patch adds support for SP810 system controller and also fixes the
SP804 timer clock frequency.
However the SP804 driver needs to be enabled on ARM64 to test this,
which requires SP804 driver to be moved out of arch/arm.
Fixes: 71f867ec130e ("arm64: Add Juno board device tree.")
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This defines the Juno "APB system registers" as a syscon device,
and all the LEDs controlled by the APB system registers right
below it using the syscon LEDs driver on top of syscon. Define
LED0 for heartbeat, LED1 for MMC0 activity and the following
four LEDs indicating CPU activity using the Linux-specific
DT bindings for triggers.
This is the pattern and same drivers as used on the legacy
platform device trees for the ARM Integrators and the RealView
PB1176.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Tested-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC 64-bit changes from Olof Johansson:
"Mostly DT updates for arm64, but also a couple of Kconfig additions.
Main contents:
- Qualcomm MSM8916/APQ8016
- Spreadtrum SC9836
- Xilinx ZynqMP
- pincontrol entries for MediaTek MT8173"
* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: dts: add interrupt-affinity property to pmu node for juno
arm64: dts: Add Qualcomm APQ8016 SBC evaluation board dts
arm64: dts: Add Qualcomm MSM8916 SoC and evaluation board dts
arm64: dts: sprd: adding coresight entries to Spreadtrum SC9836
arm64: Add support for Spreadtrum's Sharkl64 Platform in Kconfig and defconfig
arm64: dts: Add support for Spreadtrum SC9836 SoC in dts and Makefile
ARM64: Add new Xilinx ZynqMP SoC
arm64: qcom: Add support for Qualcomm MSM8916 SoC
arm64: dts: mt8173: Add pinctrl/GPIO/EINT node for mt8173.
arm64: mediatek: Select PINCTRL for Mediatek platform
|
|
Make the Juno .dts robust against potential reordering of the CPU nodes
by adding an explicit interrupt-affinity property to the PMU node. While
we're at it, fix the PMU interrupts numbers too.
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
The UART reference clock speed is 7273.8 kHz, not 72738 kHz.
Dots aren't usually used in node names even though ePAPR permits
them. However, this can easily be avoided by expressing the
frequency in Hz, not kHz.
This patch changes the name to refclk7273800hz, reflecting the
actual clock speed.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Commit 5d425c18653731af6 ("arm64: kernel: add support for cpu cache
information") adds cacheinfo support for ARM64. Since there's no
architectural way of detecting the cpus that share particular cache,
device tree can be used and the core cacheinfo already supports the
same.
This patch adds the L2 cache topology on Juno board, FVP/RTSM and
foundation models.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Without explicit command-line parameters, the Juno UART ends up running
at 57600 baud in the kernel, which is at odds with the 115200 baud used
by the rest of the firmware. Since commit 7914a7c5651a5161 now lets us
fix this by specifying default options in stdout-path, do so.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
The Cortex-A5x TRM states in paragraph "9.2 Generic Timer functional
description" that generic timers provide an active-LOW interrupt
output. Fix the device trees to correctly describe this.
While doing this update the CPU mask to match the number of described
CPUs as well.
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This adds support for ARM's Juno development board (rev 0).
It enables most of the board peripherals: UART, I2C, USB, MMC and
100Mb ethernet. There is no support at the moment for clock setting
and HDLCD driver which depends on it.
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Dependency for Juno support, from cleanup branch.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Moving dts files to vendor subdirs.
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Robert Richter <rrichter@cavium.com>
|
