| Age | Commit message (Collapse) | Author |
|---|
|
This is the 5.4.153 stable release
|
|
[ Upstream commit 04fa4f03e3533f51b4db19cb487435f5862a0514 ]
The LS1028A has two FlexCAN controller. These are compatible with
the ones from the LX2160A. Add the nodes.
The first controller was tested on the Kontron sl28 board.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f2dc2359b75e1fd345fd710862f73db20dc55864 ]
The SP805 binding sets the order of the clock-names to be: "wdog_clk",
"apb_pclk" (in exactly that order).
Change the order in the DTs for Freescale platforms to match that. The
two clocks given in all nodes are actually the same, so that does not
change any behaviour.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
This is the 5.4.140 stable release
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
|
|
[ Upstream commit 7e71b85473f863a29eb1c69265ef025389b4091d ]
U-Boot attempts to fix up the "clock-frequency" property of the "/sysclk" node:
https://elixir.bootlin.com/u-boot/v2021.04/source/arch/arm/cpu/armv8/fsl-layerscape/fdt.c#L512
but fails to do so:
## Booting kernel from Legacy Image at a1000000 ...
Image Name:
Created: 2021-06-08 10:31:38 UTC
Image Type: AArch64 Linux Kernel Image (gzip compressed)
Data Size: 15431370 Bytes = 14.7 MiB
Load Address: 80080000
Entry Point: 80080000
Verifying Checksum ... OK
## Flattened Device Tree blob at a0000000
Booting using the fdt blob at 0xa0000000
Uncompressing Kernel Image
Loading Device Tree to 00000000fbb19000, end 00000000fbb22717 ... OK
Unable to update property /sysclk:clock-frequency, err=FDT_ERR_NOTFOUND
Starting kernel ...
All Layerscape SoCs except LS1028A use "sysclk" as the node name, and
not "clock-sysclk". So change the node name of LS1028A accordingly.
Fixes: 8897f3255c9c ("arm64: dts: Add support for NXP LS1028A SoC")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
This is the 5.4.125 stable release
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
|
|
[ Upstream commit dabea675faf16e8682aa478ff3ce65dd775620bc ]
While enabling EDAC support for the LS1028A it was discovered that the
memory node has a wrong endianness setting as well as a wrong interrupt
assignment. Fix both.
This was tested on a sl28 board. To force ECC errors, you can use the
error injection supported by the controller in hardware (with
CONFIG_EDAC_DEBUG enabled):
# enable error injection
$ echo 0x100 > /sys/devices/system/edac/mc/mc0/inject_ctrl
# flip lowest bit of the data
$ echo 0x1 > /sys/devices/system/edac/mc/mc0/inject_data_lo
Fixes: 8897f3255c9c ("arm64: dts: Add support for NXP LS1028A SoC")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
This is the 5.4.95 stable release
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
|
|
[ Upstream commit 1653e3d470629d25c64cd8a2f84adb20a9348b0c ]
The offset of the reset request register is 0, the absolute address is
0x1e60000. Boards without PSCI support will fail to perform a reset:
[ 26.734700] reboot: Restarting system
[ 27.743259] Unable to restart system
[ 27.746845] Reboot failed -- System halted
Fixes: 8897f3255c9c ("arm64: dts: Add support for NXP LS1028A SoC")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
This is the 5.4.87 stable release
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
|
|
[ Upstream commit d0570a575aa83116bd0f6a99c4de548af773d950 ]
On the LS1028A the ENETC reference clock is connected to 4th HWA output,
see Figure 7 "Clock subsystem block diagram".
The PHC may run with a wrong frequency. ptp_qoriq_auto_config() will read
the clock speed of the clock given in the device tree. It is likely that,
on the reference board this wasn't noticed because both clocks have the
same frequency. But this must not be always the case. Fix it.
Fixes: 49401003e260 ("arm64: dts: fsl: ls1028a: add ENETC 1588 timer node")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Merge Linux stable release v5.4.24 into imx_5.4.y
* tag 'v5.4.24': (3306 commits)
Linux 5.4.24
blktrace: Protect q->blk_trace with RCU
kvm: nVMX: VMWRITE checks unsupported field before read-only field
...
Signed-off-by: Jason Liu <jason.hui.liu@nxp.com>
Conflicts:
arch/arm/boot/dts/imx6sll-evk.dts
arch/arm/boot/dts/imx7ulp.dtsi
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
drivers/clk/imx/clk-composite-8m.c
drivers/gpio/gpio-mxc.c
drivers/irqchip/Kconfig
drivers/mmc/host/sdhci-of-esdhc.c
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
drivers/net/can/flexcan.c
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
drivers/net/ethernet/mscc/ocelot.c
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
drivers/net/phy/realtek.c
drivers/pci/controller/mobiveil/pcie-mobiveil-host.c
drivers/perf/fsl_imx8_ddr_perf.c
drivers/tee/optee/shm_pool.c
drivers/usb/cdns3/gadget.c
kernel/sched/cpufreq.c
net/core/xdp.c
sound/soc/fsl/fsl_esai.c
sound/soc/fsl/fsl_sai.c
sound/soc/sof/core.c
sound/soc/sof/imx/Kconfig
sound/soc/sof/loader.c
|
|
Labels are used to name switch port net devices in Linux, use more
convenient names to make it simpler for users.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
(cherry picked from commit 3ad82375cfc4d4f6df68ebe02164995de654001c)
|
|
Named the ports node of the Felix Eth switch so it can be used in DT
overlays to associate the ports with proper PHYs.
Ports are now by default disabled in dtsi, so if the board dts doesn't
do anything about them they stay disabled.
Updated RDB and QDS dts files to match.
Replaced all 'phy-connection-type' with 'phy-mode'.
The set-up for protocol 7777 on QDS was changed to a single quad port card
in slot 1. This requires a QDS board with no lane B rework and a AQR412
or similar PHY card without any lane rework done on it.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
(cherry picked from commit 0462421755cb92b3ee9ace632d15a9a19db9f14c)
|
|
This was missed when moving the CPU port and disabling eno3.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
(cherry picked from commit b180bb294ef127e40f11d186443aed162cd5d270)
|
|
The eDMA of LS1028A soc has a little bit different from others, So we
should distinguish them in driver by compatible.
Signed-off-by: Peng Ma <peng.ma@nxp.com>
(cherry picked from commit fa6956d853b3ebed26e1588e7b78d959701fa841)
|
|
commit 33eae7fb2e593fdbaac15d843e2558379c6d1149 upstream.
DCFG block uses little endian. Fix it so that register access becomes
correct.
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Acked-by: Yangbo Lu <yangbo.lu@nxp.com>
Fixes: 8897f3255c9c ("arm64: dts: Add support for NXP LS1028A SoC")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3f0fb37b22b460e3dec62bee284932881574acb9 ]
The reboot register isn't located inside the DCFG controller, but in its
own RST controller. Fix it.
Fixes: 8897f3255c9c ("arm64: dts: Add support for NXP LS1028A SoC")
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 961f8209c8d5ef5d33da42e6656d7c8179899da0 ]
The temperature sensor may jump backwards because there is a wrong
calibration value. Both values have to be monotonically increasing.
Fix it.
This was tested on a custom board.
Fixes: 571cebfe8e2b ("arm64: dts: ls1028a: Add Thermal Monitor Unit node")
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Tang Yuantian <andy.tang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Since dwc3 cache type has been set to cacheable, apply dma-coherent to
all dwc3 nodes accordingly.
Note: For LS1043A and LS1046A, since QE-HDLC still doesn't support
dma-coherent, we cannot directly revert cd1a4f3c (sdk: dts: ls104x move
dma-coherent from soc to its child nodes) to recover dma-coherent for
soc.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
|
|
This patch adds clock-names "mclk0" to match with the current SAI
driver.
Signed-off-by: Alison Wang <alison.wang@nxp.com>
|
|
This patch returns to the switch port setup from BSP 0.2, where the
switch only had a single Ethernet connection to the CPU, via a tagging
interface. Choose eno2 for this purpose, as it has higher bandwidth and
also supports TSN offloads.
The reason is that the switch is not able to do DSA tags on 2 CPU ports
at the same time, and it is confusing to have so many ports with no
clear indication which should be used for what (a "data" port and a
"control" port).
We don't revert to the BSP 0.2 RCW configuration, however. The ENETC
port 3 is still enabled in the RCW, however it is not probed by Linux by
default, since the large majority of use cases will not need it. For
those that do (like originating 802.1CB traffic from the CPU), it can be
enabled back by simply reverting this device tree change.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
|
|
This is just an informative change, because all Felix MACs inside the
LS1028A are hardwired in gigabit mode anyway.
Only PHYLINK is able to understand fixed-link speeds higher than 1 Gbps.
With PHYLIB, fixed-link interfaces are emulated as C22 PHYs by the swphy
driver, and C22 does not specify settings for speeds higher than
gigabit.
This patch brings no functional change except for the messages printed
during driver initialization.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
|
|
Since Felix is not a platform device but a PCI device, the "compatible"
string serves no purpose. The device driver is found by matching the PCI
device/vendor ID to the ENETC PF.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
|
|
PHYLINK requires that device tree nodes have a phy-mode or
phy-connection-type property. The internal Felix ports really are
connected to the ENETC via 2 back-to-back MACs, so the correct MII type
is GMII (one of which is overclocked at 2.5Gbaud, but still GMII).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
|
|
The HD Display controller includes DP TX CTRL and DPHY, their offers
multi-protocol support of standards such as DisplayPort and eDP, with
one of these standards supported at a time.
This patch enables the HD Display controller driver on the LS1028A.
Signed-off-by: Wen He <wen.he_1@nxp.com>
|
|
Update the property #clock-cells = <1> to #clock-cells = <0> of the
dpclk, since the Display output pixel clock driver provides single
clock output.
Signed-off-by: Wen He <wen.he_1@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
In order to maximise performance of the LCD Controller's 64-bit AXI
bus, for any give speed bin of the device, the AXI master interface
clock(ACLK) clock can be up to CPU_frequency/2, which is already
capable of optimal performance. In general, ACLK is always expected
to be equal to CPU_frequency/2. APB slave interface clock(PCLK) and
Main processing clock(PCLK) both are tied to the same clock as ACLK.
This change followed the LS1028A Architecture Specification Manual.
Signed-off-by: Wen He <wen.he_1@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
In order for the dwc controller to work with SMMU it needs the
bootloader to fixup it's iommu-map property. In the current
implementation to bootloader will not perform the fixup if the
property is not already in the device tree with dummy fields.
Add it to fix DWC PCI over SMMU.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
|
|
dcfg use little endian that SoC register value will be correct
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
|
|
The current interrupt-map entries lost the 'parent unit address',
it will result in fail to allocate legacy INTx interrupts.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
|
|
Add little-endian property of rcpm for ls1028a,ls1088a,ls208xa
Signed-off-by: Biwen Li <biwen.li@nxp.com>
|
|
This enables the CPU traffic for the l2 switch (aka the
CPU frame injection/ extraction feature).
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
|
|
The INTB interrupt includes,
- PTP timestamp ready in timestamp FIFO
- TSN Preemption
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
|
|
Add the switch device node, available on PF5, so that the
switch port sub-nodes (net devices) can be linked to
corresponding board specific phy nodes (external ports) or
have their link mode defined (internal ports).
The switch device features 6 ports, 4 with external links
and 2 internally facing to the ls1028a SoC and connected via
fixed links to 2 internal enetc ethernet contoller ports.
Add the corresponding enetc internal port device nodes,
mapped to PF2 and PF6 PCIe functions.
And don't forget to enable the 4MB BAR4 in the root complex
ECAM space, where the switch registers are mapped.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
|
|
The patch adds ftm_alarm0 DT node for LS1028ARDB board
FlexTimer1 module is used to wakeup the system
Signed-off-by: Biwen Li <biwen.li@nxp.com>
|
|
For enabling OP-TEE on LS1028, need to add optee node
in DTS
Signed-off-by: Sahil Malhotra <sahil.malhotra@nxp.com>
|
|
Add GPU dts node to enable GPU feature.
Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
|
|
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
|
|
Add fspi node property for LS1028A SoC for FlexSPI driver.
Property added for the FlexSPI controller and for the connected
slave device for the LS1028ARDB and LS1028AQDS target.
This is having one SPI-NOR flash device, mt35xu02g connected at
CS0.
Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
|
|
Add flexcan node in LS1028A SOC file as well as in QDS and RDB files.
The device tree bindings used can be referred from
Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
|
|
LS1028a implements 2 PCIe 3.0 controllers.
Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
|
|
Pull networking updates from David Miller:
1) Support IPV6 RA Captive Portal Identifier, from Maciej Żenczykowski.
2) Use bio_vec in the networking instead of custom skb_frag_t, from
Matthew Wilcox.
3) Make use of xmit_more in r8169 driver, from Heiner Kallweit.
4) Add devmap_hash to xdp, from Toke Høiland-Jørgensen.
5) Support all variants of 5750X bnxt_en chips, from Michael Chan.
6) More RTNL avoidance work in the core and mlx5 driver, from Vlad
Buslov.
7) Add TCP syn cookies bpf helper, from Petar Penkov.
8) Add 'nettest' to selftests and use it, from David Ahern.
9) Add extack support to drop_monitor, add packet alert mode and
support for HW drops, from Ido Schimmel.
10) Add VLAN offload to stmmac, from Jose Abreu.
11) Lots of devm_platform_ioremap_resource() conversions, from
YueHaibing.
12) Add IONIC driver, from Shannon Nelson.
13) Several kTLS cleanups, from Jakub Kicinski.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1930 commits)
mlxsw: spectrum_buffers: Add the ability to query the CPU port's shared buffer
mlxsw: spectrum: Register CPU port with devlink
mlxsw: spectrum_buffers: Prevent changing CPU port's configuration
net: ena: fix incorrect update of intr_delay_resolution
net: ena: fix retrieval of nonadaptive interrupt moderation intervals
net: ena: fix update of interrupt moderation register
net: ena: remove all old adaptive rx interrupt moderation code from ena_com
net: ena: remove ena_restore_ethtool_params() and relevant fields
net: ena: remove old adaptive interrupt moderation code from ena_netdev
net: ena: remove code duplication in ena_com_update_nonadaptive_moderation_interval _*()
net: ena: enable the interrupt_moderation in driver_supported_features
net: ena: reimplement set/get_coalesce()
net: ena: switch to dim algorithm for rx adaptive interrupt moderation
net: ena: add intr_moder_rx_interval to struct ena_com_dev and use it
net: phy: adin: implement Energy Detect Powerdown mode via phy-tunable
ethtool: implement Energy Detect Powerdown support via phy-tunable
xen-netfront: do not assume sk_buff_head list is empty in error handling
s390/ctcm: Delete unnecessary checks before the macro call “dev_kfree_skb”
net: ena: don't wake up tx queue when down
drop_monitor: Better sanitize notified packets
...
|
|
This patch is to add esdhc node and enable SD UHS-I,
eMMC HS200 for ls1028ardb/ls1028aqds board.
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The LS1028A has a clock domain PXLCLK0 used for the Display output
interface in the display core, independent of the system bus frequency,
for flexible clock design. This display core has its own pixel clock.
This patch enable the pixel clock provider on the LS1028A.
Signed-off-by: Wen He <wen.he_1@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Ls1028a platform, the i2c input clock is actually platform pll CLK / 4
(this is the hardware connection), other clock divider can not get the
correct i2c clock, resulting in the output of SCL pin clock is not
accurate.
Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Update the nodes to include little-endian
property to be consistent with the hardware.
Signed-off-by: Song Hui <hui.song_1@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The Thermal Monitoring Unit (TMU) monitors and reports the
temperature from 2 remote temperature measurement sites
located on ls1028a chip.
Add TMU dts node to enable this feature.
Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This patch use the optional property node "arm,malidp-arqos-value" to
can be dynamic configure QoS signaling.
Signed-off-by: Wen He <wen.he_1@nxp.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
LS1028a has one Ethernet management interface. On the QDS board, the
MDIO signals are multiplexed to either on-board AR8035 PHY device or
to 4 PCIe slots allowing for SGMII cards.
To enable the Ethernet ENETC Port 1, which can only be connected to a
RGMII PHY, the multiplexer needs to be configured to route the MDIO to
the AR8035 PHY. The MDIO/MDC routing is controlled by bits 7:4 of FPGA
board config register 0x54, and value 0 selects the on-board RGMII PHY.
The FPGA board config registers are accessible on the i2c bus, at address
0x66.
The PF3 MDIO PCIe integrated endpoint device allows for centralized access
to the MDIO bus. Add the corresponding devicetree node and set it to be
the MDIO bus parent.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
