Age | Commit message (Collapse) | Author |
|
This is the 5.4.148 stable release
Conflicts:
- drivers/dma/imx-sdma.c:
Following upstream patches are already applied to NXP tree:
7cfbf391e870 ("dmaengine: imx-sdma: remove duplicated sdma_load_context")
788122c99d85 ("Revert "dmaengine: imx-sdma: refine to load context only
once"")
- drivers/usb/chipidea/host.c:
Merge upstream commit a18cfd715e91 ("usb: chipidea: host: fix port index
underflow and UBSAN complains") to NXP version.
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
|
|
[ Upstream commit c1a6018d1839c9cb8f807dc863a50102a1a5c412 ]
ls1046afrwy and ls1046ardb boards have CAT24C04[1] and CAT24C05[2]
eeproms respectively. Both are 4Kb (512 bytes) in size,
and compatible with AT24C04[3].
Remove multi-address entries, as both the boards have a single chip each.
[1] https://www.onsemi.com/pdf/datasheet/cat24c01-d.pdf
[2] https://www.onsemi.com/pdf/datasheet/cat24c03-d.pdf
[3] https://ww1.microchip.com/downloads/en/DeviceDoc/doc0180.pdf
Signed-off-by: Raag Jadav <raagjadav@gmail.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
* tag 'v5.4.47': (2193 commits)
Linux 5.4.47
KVM: arm64: Save the host's PtrAuth keys in non-preemptible context
KVM: arm64: Synchronize sysreg state on injecting an AArch32 exception
...
Conflicts:
arch/arm/boot/dts/imx6qdl.dtsi
arch/arm/mach-imx/Kconfig
arch/arm/mach-imx/common.h
arch/arm/mach-imx/suspend-imx6.S
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
arch/powerpc/include/asm/cacheflush.h
drivers/cpufreq/imx6q-cpufreq.c
drivers/dma/imx-sdma.c
drivers/edac/synopsys_edac.c
drivers/firmware/imx/imx-scu.c
drivers/net/ethernet/freescale/fec.h
drivers/net/ethernet/freescale/fec_main.c
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
drivers/net/phy/phy_device.c
drivers/perf/fsl_imx8_ddr_perf.c
drivers/usb/cdns3/gadget.c
drivers/usb/dwc3/gadget.c
include/uapi/linux/dma-buf.h
Signed-off-by: Jason Liu <jason.hui.liu@nxp.com>
|
|
commit d79e9d7c1e4ba5f95f2ff3541880c40ea9722212 upstream.
The correct setting for the RGMII ports on LS1046ARDB is to
enable delay on both Rx and Tx so the interface mode used must
be PHY_INTERFACE_MODE_RGMII_ID.
Since commit 1b3047b5208a80 ("net: phy: realtek: add support for
configuring the RX delay on RTL8211F") the Realtek 8211F PHY driver
has control over the RGMII RX delay and it is disabling it for
RGMII_TXID. The LS1046ARDB uses two such PHYs in RGMII_ID mode but
in the device tree the mode was described as "rgmii".
Changing the phy-connection-type to "rgmii-id" to address the issue.
Fixes: 3fa395d2c48a ("arm64: dts: add LS1046A DPAA FMan nodes")
Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use compatibles as "jedec,spi-nor" to probe flash without displaying
warning: found s25fs512s, expected m25p80.
Remove "fsl,qspi-has-second-chip" as new driver doesn't use it anymore.
Update rx and tx width to 1.
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
(cherry picked from commit 538bebe00be17f49d6f4c5b5b75be67ba4bf6ed4)
|
|
layerscape otg function should be supported HNP SRP and ADP protocol
accroing to rm doc, but dwc3 code not realize it and use id pin to
detect who is host or device(0 is host 1 is device) this patch is to
enable OTG mode on ls1028ardb ls1088ardb and ls1046ardb in dts
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
|
|
The qspi flash in ls1046a based QDS and RDB boards can operate
at 50MHz frequency.
Therefore, update the maximum supported freq in their respective
dts files.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
|
|
commit 118e2f48ee8da3f5547c24888bd6fdb78f03b7ce
Author: Peng Ma <peng.ma@nxp.com>
Date: Wed Jul 25 08:53:07 2018 +0000
dts: fsl-ls1021a, fsl-ls1043a, fsl-ls1046a: add multi block node
support
add block-offset to support different virtual block offset for qdma
base on soc;
the interrupt named "qdma-queueN(N:0,1,2,3)" correspond to a virtual
block,N based on block number of qdma;
Signed-off-by: Peng Ma <peng.ma@nxp.com>
commit 46123df3a174f0d76c8b954a0386e64841453836
Author: Florinel Iordache <florinel.iordache@nxp.com>
Date: Thu Aug 9 12:29:18 2018 +0300
arm64: dts: updates for Unified Backplane driver
Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
commit c08136017e8b18eb58b153129487c5dc760afd20
Author: Florinel Iordache <florinel.iordache@nxp.com>
Date: Thu Aug 9 12:23:42 2018 +0300
arm64: dts: ls1046: add support for 10GBase-KR
Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
commit 8473f478783f6f601e1c6d7e6afba49a13f3a6a3
Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
Date: Mon Apr 2 16:24:33 2018 +0800
arm64: dts: ls1046a: add dts entry for A-010650
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
commit 3159fe9263fb145601ccb07fcb9336a68fba4e08
Author: Bao Xiaowei <xiaowei.bao@nxp.com>
Date: Fri Oct 13 11:04:39 2017 +0800
arm64: dts: ls1046a: add the property of IB and OB
Add the property of inbound and outbound windows number for ep
driver.
Signed-off-by: Bao Xiaowei <xiaowei.bao@nxp.com>
Acked-by: Minghuan Lian <minghuan.Lian@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
commit c8fed58f3c9a0219fda0467791f61abd86eb97f3
Author: Abhimanyu Saini <abhimanyu.saini@nxp.com>
Date: Wed Jan 24 22:56:48 2018 +0530
arm64: dts: freescale: ls1046a: Modify DT nodes for qspi
Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
commit 96558859ea3a4af44c0b25441f7574ae6222509a
Author: Ran Wang <ran.wang_1@nxp.com>
Date: Fri Jan 5 15:17:23 2018 +0800
arm64: dts: ls1046a: Enable usb3-lpm-capable for usb3 node
Enable USB3 HW LPM feature for ls1046a and active patch for
snps erratum A-010131. It will disable U1/U2 temperary when
initiate U3 request.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
commit 9b17a5fcf8da5656ff99ebef3d63ba040e9f676d
Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
Date: Tue Jun 13 13:14:26 2017 +0800
arm64: dts: correct the register range of dcfg
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
commit 67c82e3c7b376139d7cee624589bedbc311f8868
Author: jiaheng.fan <jiaheng.fan@nxp.com>
Date: Thu May 11 17:36:33 2017 +0800
arm64: dts: ls1021/ls1043/ls1046: add qdma nodes
Signed-off-by: jiaheng.fan <jiaheng.fan@nxp.com>
commit 4a6cef0c83748ee4f6641489fc324bd64095485d
Author: Chenhui Zhao <chenhui.zhao@nxp.com>
Date: Fri May 5 17:53:27 2017 +0800
arm64: dts: ls1046a: add ftm0 node
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
|
|
Use a generic node name for the m25p80 flashes on ls1043 and ls1046 boards.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
We will move the FSL QSPI driver to the SPI framework soon. To
prepare and to make sure the full buswidth is used (as it is with
the current driver), let's add the right properties.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The properties 'num-cs' and 'bus-num' were never read by the driver
and can be removed.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
dtc has new checks for I2C and SPI buses. Fix the SPI bus node names
and warnings in unit-addresses.
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dtb: Warning (i2c_bus_reg): /soc/i2c@2180000/eeprom@57: I2C bus unit address format error, expected "53"
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dtb: Warning (i2c_bus_reg): /soc/i2c@2180000/eeprom@56: I2C bus unit address format error, expected "52"
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Replace license text with corresponding SPDX identifiers and update the
format of existing SPDX identifiers to follow the new guideline
Documentation/process/license-rules.rst.
Note that some of the files mentioned X11 license previously but the
license text actually matches MIT license.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add the DPAA 1.x FMan device tree nodes for LS1046A boards.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This patch is to enable SD UHS-I mode and eMMC HS200 mode on
LS1046ARDB in dts. Also, the eSDHC peripheral clock must be used
instead of platform clock to support these modes.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Update the copyright claims to comply with company policy.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The LS1046A reference design board (RDB) is a high-performance computing,
evaluation, and development platform that supports the LS1046A SoC.
Signed-off-by: Mingkai Hu <Mingkai.Hu@nxp.com>
Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|